Himachal

Active

Works

Civil Works - Others

DED-36 26-27

Himachal Pradesh State Electricity Board Limited

Sr. Executive Engineer, Elec. Div. HPSEBL Dehra | Kangra, Himachal Pradesh

Amount: ₹1.9 LCloses: 28 Sept 2026Due tomorrow

Timeline

Published21 Sept 2026
Closes28 Sept 2026
Bid Opening28 Sept 2026

Tender Value

₹1.9 L

EMD Value

₹1,865

Closing Date

28 Sept 2026, 11:00 amDue tomorrow

Tender Inviting Organisation

Name

Sr. Executive Engineer

Address

Elec. Div. HPSEBL Dehra

Work Description

Tender for painting, aluminum partition and minor repair in office of Electrical Division HPSEBL Dehra.

Tender Information

Tender ID

2026_HPSEB_142416_2

Reference Number

3086-95

Tender Type

Open Tender

Product Category

Civil Works - Others

Form of Contract

Percentage

Period of Work

90 days

Location

Sr. Executive Engineer, Elec. Div. HPSEBL Dehra

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

7 documents required · 7 mandatory

Fee/PreQual/Technical

RequiredCost of Tender Form, Earnest Money as per NIT (.pdf)

RequiredCopy of registration with HPPWD/IPH experience certificate,Affidavit of Non Blacklisted by the Board (.pdf)

RequiredCopy of PAN, GST, Credit Cash Limit, Bid Capacity Certificate (.pdf)

RequiredIncome Tax Return (of Last three years) ( No other Documents) (.pdf)

RequiredTurnover (of last 3 years), Net Worth Certificate (of last 3 years) (No other Documents) (.pdf)

RequiredCopy of balance sheet, profit and loss statement (of last 3 years) audited by CA (No other docs) (.pdf)

Finance

RequiredBOQ (.xls)

Fee & Financial Details

Tender Fee Amount

₹590

EMD Fee Amount

₹1,865

Important Dates

Last Activity

21 Sept 2026

Published

21 Sept 2026

Bid Opening

28 Sept 2026

Download Starts

21 Sept 2026

Download Ends

28 Sept 2026

Submission Starts

21 Sept 2026

Bill of Quantities

PercentageBoQ_Ver4.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (10 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Repair Work
1.01	Finishing walls with Acrylic Smooth exterior paint of New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)	371.64	sqm	172.53	₹64,119.74
1.02	Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)	75.58	kg	491.26	₹37,128.2
1.03	Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete. With 12 mm mild steel U beading.	11.52	sqm	1,011.65	₹11,654.21
1.04	Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.	230.45	kg	107.77	₹24,835.6
1.05	Providing and fixing Wall lining PVC of approved brand, prelaminated one side decorated lamination and other side balancing lamination with necessary fixing arrangements including all necessary screws,gutties and fixing complete.	37.4	sqm	995.15	₹37,218.61
1.06	Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.15mm dia	10	nos	224.27	₹2,242.7
1.07	Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :15mm dia	2	nos	420.39	₹840.78
1.08	Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931	2	nos	608.74	₹1,217.48
1.09	Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge	2	nos	61.17	₹122.34

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.43 MB

Work Item Documents

TD.pdf

Tender Documents • 0.30 MB

BOQ_213933.xls

BOQ • 0.34 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Repair Work
1.01	Finishing walls with Acrylic Smooth exterior paint of New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)	371.64	sqm	172.53	₹64,119.74
1.02	Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)	75.58	kg	491.26	₹37,128.2
1.03	Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete. With 12 mm mild steel U beading.	11.52	sqm	1,011.65	₹11,654.21
1.04	Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.	230.45	kg	107.77	₹24,835.6
1.05	Providing and fixing Wall lining PVC of approved brand, prelaminated one side decorated lamination and other side balancing lamination with necessary fixing arrangements including all necessary screws,gutties and fixing complete.	37.4	sqm	995.15	₹37,218.61
1.06	Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.15mm dia	10	nos	224.27	₹2,242.7
1.07	Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :15mm dia	2	nos	420.39	₹840.78
1.08	Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931	2	nos	608.74	₹1,217.48
1.09	Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge	2	nos	61.17	₹122.34

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1Repair Work

1.01

Finishing walls with Acrylic Smooth exterior paint of New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

371.64

sqm

172.53

₹64,119.74

1.02

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)

75.58

491.26

₹37,128.2

1.03

Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete. With 12 mm mild steel U beading.

11.52

sqm

1,011.65

₹11,654.21

1.04

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

230.45

107.77

₹24,835.6

1.05

Providing and fixing Wall lining PVC of approved brand, prelaminated one side decorated lamination and other side balancing lamination with necessary fixing arrangements including all necessary screws,gutties and fixing complete.

37.4

sqm

995.15

₹37,218.61

1.06

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.15mm dia

nos

224.27

₹2,242.7

1.07

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :15mm dia

nos

420.39

₹840.78

1.08

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931

nos

608.74

₹1,217.48

1.09

Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge

nos

61.17

₹122.34