SPECIAL REPAIR OF BATHROOM (MAIN OFFICE) BLDG NO T-44 AND CERTAIN SANCTIONED WORKS AT DHOLEWAL MIL COMPLEX UNDER GE LUDHIANA

Amount

Sch 'A' sec-I

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness ( below or above gd level).Complete all as specified and directed.

Taking down cement plaster of any description on brick or concrete surfaces etc including racking out joints, hacking for key, scrubbing down with water etc. Complete all as specified and directed.

M&L for 25mm thick Cement concrete 1:2:4 type B-0 using 12.5 mm graded stone aggr. Finished even and fair.

M&L for 50mm thick PCC 1:2:4Type B-1 using 20mm crushed stone aggregate as in plinth protection and like finished even and smooth without using extra cement

Taking down chowkats or frames n.exc 1.5 Sqm.

Taking down chowkats or frames exc 1.5 Sqm but n.exc 4.0 Sqm with shutters (without taking off shutters from the frame).

S&F for box type steel ventilator side/top hung with glazing bars dovetailed or welded and treated with one shop coat of zinc chromate primer complete all as specified and shown on Drawing No CEJZ/TD-06/07 & CEJZ/TD-07/07.

S&F for solid PVC door frame of sixe 50mmx47mm made out of 5mm wood grain printed PVC Sheet reinforced with MS square tube in opening as per specification and drawing.

S&F for factory made soilid panel PVC Door shutter 30mm thick (Stype) consisting of frame made out MS frame shall be covered with heat moulded wood grain printed PVC 'C' channel having PVC sheet stripof 20mm width stuck inside with solvent cement for stiles and wood grain printed PVC sheet used instead of Plain colour PVC sheet & 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm used instead of exposed portion of PVC sheet beading as per specification and drawing.

S&F for 3 mm thick sheet glass, ordinary quality and glazing with oil putty in squares n,exc 0.5 Sqm, each pane. Complete all as specified and directed.

S&F for 150mm aluminium anodised barrel tower bolts of extruded section and fixed.

S&F for 250mm aluminium alloy anodised sliding bolts with hasp, staple and fixing clips of sheet, cast or extruded section fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed.

S&F for 125mm aluminium handles, cast type , anodised.

Dismantling framed timber scantling 40 sq cm and over in section in any position (framed work)

Dismantling Asbestos cement corrugated or semi corrugated sheet in roof covering all as specified.

S&F for pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

S&F for roof trusses (framed), trussed , purlins , crane gantries, rails etc (beam , tee , angle, channel or flat sections) all as specified.

Demolition of brick work built in cement mortar complete all as specified.

M&L for brick work with sub class "B" bricks straight or curved on plan etc 6 m mean radius in CM 1:4 complete all as specified.

Ditto- all as per item No 19 above but except bricks

M&L for 15mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:4 finsihed the surfaces even and smooth without using extra cement. Complete all as specified and directed.

M&L for 12mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:6 finsihed the surfaces even and smooth without using extra cement. Complete all as specified and directed.

M&L for preparation of new plastered wall surfaces and applying three coats of whitewash complete all as specified.

M&L for preparation of old plastered wall surfaces and applying two coats of whitewash complete all as specified.

M&L for two coats cement base paint including preparation of newly plastered surfaces.

M&L for one coats cement base paint including preparation of old plastered surfaces.

M&L for non skid joint free ceramic coloured tiles (Ist quailty) 7 to 8mm (Square/rectangular) area of each tile exc. 0.11 Sqm but n.exc. 0.18 Sqm, in floors, etc set and jointed in neat cement slury & pointed in coloured cement to match over a 15mm thick screed of CM 1:4.

Dismantling floor, hearth or wall tiles including cement mortar bedding(but not backing) and removing serviceable tiles to stores and rubbish off the premises.

M&L for glazed ceramic coloured tiles 450mm x 300mm x 7mm thick on vertical surfaces as in skirting, dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 10mm thick bedding layer in cement mortar (1:3) including necessary cutting as per site requirement complete all as specified and directed by Engineer-in-Charge.

S&F for vitreous china urinal,half stall type, white with grating union and discharge pipe including brackets.

S&F in replacement vitreous china wash down water closet pan (pedestal pattern) white with trap including connection to existing out joint pipe, flushing pipe or cistern, antisyphonage pipe, including making good to floor etc complete all as specified and directed by Engineer-in-Charge.

S&F in repairs 10 litres capacity PVC valveless syphonic action type low level flushing cistern white with inlet, ball valve, float and handle including brackets complete all as specified and directed by Engineer-in-Charge

S & F in repair vitreous china wash basin, white, flat back of size 550mm x 400mm fixed on existing brackets, including 32mm bore CP waste coupling, PVC waste pipe, inlet & outlet, chrimium plated PVC pipe etc, complete all as specified and directed by Engineer-in-Charge.

S&F in repair plastic water closet seat white closed pattern with flat botom and cover mild steel chromium plated or aluminium plated or aluminished hinging device complete all as specified and directed by Engineer-in-Charge

S&F bib taps fancy type chromium plated with crutch or butter fly handle screwed down, screwed for iron pipe or for brass ferrule.

Taking down steel water tubes of size 15mm bore and connection including cleaning for refixing or removal to store complete, all as specified & directed by Engineer-in-charge.

Taking down steel water tubes of size 20mm bore and connection including cleaning for refixing or removal to store complete, all as specified & directed by Engineer-in-charge.

S&F 15mm GI tubes, medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors.

S&F20mm bore tubes medium grade , galvanised, with all fittings, and fixed complete to walls and ceilings or laid in floors.

S & F fancy type pillar taps 15 mm bore cast copper alloy with capstan heads chromium plated ,scrwed down high pressure, with or without lettered hot or cold with long scrwed shanks and fly nuts-nuts scrwed for iron pipe and fixed in repair complete all as per specified.

S&F for 15mm bore stop valve/angle valve cast copper alloy chromium plated fancy type screwed down, high pressure, with crutch or butter fly handles fixed in repairs.

S&F for stop valves 20mm, cast copper alloy, screwed down, high pressure with crutch or butterfly handle etc complete fixed in repairs.

S&F for 75mm bore CI branch pieces with oval access door, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches.

S&F for 75mm bore cast iron soil, waste and vent pipe, in any length with or without ears, with cement joints, laid in trenches or in floors.

S&F for PVC connections 15mm size with PTMT nuts of lenth 450mm

Dismantling wall and ceiling boards (Fibre, pulp, insulation, etc.) or insulation boards/slabs, any thickness, incl. cover fillets.

S&F for GI frame work 605 X 605mm grid for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate chennel 0.9mm thick having two equal flanges of 15mm each and web 45mm suspended from soffit at approx 900mm centre to centre with GI cleats and steel expansion fastener with and including ceiling section (not exc. 1.2m length) of 0.5mm thickness having kurled web of 50mm flange of 26 mm each with lips of 1050 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre.

S&F for 4mm thick E-board , multipurpiose, decorative type,for ceiling purpose.

M&L for chequerred cement concrete tiles 20 cmx20 cm x25 mm thick set, jointed and pointed in neat cement slurry in floors with grey cement and pigment , including 20mm thcik screed bed in cement mortar 1:6 complete all as specified and directed.

M&L for 75mm thick PCC 1:2:4 Type B-2 using 40mm crushed stone aggregate as in sub base floor. Complete all as directed & specified by Engineer-in charge .

M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in bed plates, coping, kerbs, water trough and like incl. rounded or chamfered on edges.

Surface Excavation n.exc 30 cm deep and averaging 15 cm deep and 6 cm above 15 cm average depth getting out in soft/loose soil complete all as specified.

Excavation in trenches not exceeding 1.50 mtr wide and not exceeding 1.50 Mtr in depth for foundation in soft/loose soil and getting out.

M&L for hardcore of guage exc 63mm but n exc. 50 mm, deposited ,spread and levelled in layers n exc.15 cm thick, watered and rolled/rammed to a true surface all as specified.

M&L for 75mm thick PCC 1:3:6 Type C-2 using 40mm crushed stone aggregate as in sub base floor all as specified.

M&L for 80 mm thick interlocking paver block with grey cement and pigment of any size and shape confirming to IS 15658-2006, M-40 Grade as approved by E-I-C laid in flooring and joints filled/broomed with fine sand.

M&L for Sand filling under interlocking tiles complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in bed plates, coping, kerbs, water trough and like incl. rounded or chamfered on edges.

M&L for bricks work with sub class B brick straight or covered on plain exc 6m means radious built in CM 1:6 complete all as specified.

M&L for 15mm thick cement plaster on fair face of brick work in CM 1:4 finished even and fair, complete all as specified.

Removal of excavation mtrl to a distance not exc 50m and where directed at a level not exc 1.50n above the starting point all as specified.

Returning filling in including, spreading, leveling watering and well ramming in layer not exc 25 cm complete all as specified.

Taking down carefully the point wiring (light, Fan, socket or power) complete, (incl fittings such as switches, sockets any type, ceiling roses, pandents, light fittings, etc for taking credit( credit for above items should be made as per conditions separately) and making good disturbed surface of walls floors etc. all as specified.

M &L for point wiring with PVC insulated and PVC (FRLS) sheathed cable with copper conductor single core size of 1.5 sqmm in and including heavy duty PVC conduit ISI marked in concealed in walls, ceiling etc, for one light / fan / bell point controlled by one switch including replacing exisiting switch boards/boxes with new MS concealed terminal boxes with 3mm plastic laminated sheet top cover,earth contiunity wire PVC insulated sheathed 1.5 sqmm solid copper conductor cable connected to common earth dolly all as specified. :-

One light/fan/call bell point controlled by one, one way switch

One switch socket outlet point 5 Amps on independent board

One 3 Pin socket outlet , 5 Amps on the same board with other switch

Supply and fix for LED tube light fittings 1200 mm, 20W, 240V, 50Hz,rated input current- 0.070-0.110, rated input watt 20, oprating voltage range- 140-270, P.F- not less then 0.95, surge protection upto- 4Kv, IP20, THD shell be less then 10%, CCT- (k0)- 6500ANSI, higher energy saving decorative ultra slim square profile LED lighting fixture with extruded polycarbonate enviromental friendly, energy efficient complete all as specified and directed.

Supply & fix for exhaust fans AC single phase 230/ 240 V of size 300 mm sweep with louver complete all as specified and as directed.

Supply and fix for SPN MCB DB 8 ways with 200 Amps rated bus bar 240Volt, Double door type all as specified

Supply and fixing for MCB SPN 32 Amps 240 V, C- curve, 50 Hz, breking capacity-10 kA. complete all as specified and directed.

Supply and fixing for MCB SP 6-32 Amps240 V, C- curve, 50 Hz, breking capacity-10 kA . complete all as specified and directed

Supply and fix for ceiling rose surface type bakelite 65 x 50mm with three terminals complete all as specified and as directed

Supply and Fix for switch Piano,Flush type single pole , one way 5 Amp complete all as specified and as directed.

Supply and Fix for socket outlet 3 pin, 5 A flush Piano,Flush type complete all as specified and as directed.

Supply and Fix for switch Socket combenation 2 in 1 outlet 3 pin, 5 A flush type complete all as specified and as directed by Engr-in-charge

M &L for earthing complete with galvanised steel earth plate electrode 60cm X 60 cm X 6 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level with the top edge of electrode not less than 1.5 mtr below normal ground level connected to galvanised earth lead wire 4mm dia means of bolts, nuts,check nuts and washers of galvanised iron and GI lead protected with protection pipe of GI light grade 15mm dia upto 3mtr above ground level along poles fixed with two clamps of 25mm 3mm flat iron and connected to running earth wire at top of poles and watering pipe 20mm bore of GI medium grade all as shown in electrical plate No 3 of SSR Part-I 2009 connected to earthing test point all as specified and direct and testing on completion including PCC 1:3:6 ) C-I cover and frame excavation and earth work etc complete all as specified in elect plate No 3 of SSR Part -I 2009 Note :- PCC Chamber shall be constructed at least 1.50 mtr away from on the earth pit electrode and pipe for watering shall be provided in slanting manner.

Supply, laying and testing cable XLPE insulated, screened PVC bedded galvanised steel strip or wire armoured electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 6 sqmm 2 core complete all as specified and directed.

Supplying, filling in trenches, spreading, leveling sand cushioning 8 cm below cable and 15 cm above the cable for under ground cable complete all as specified & directed. Note:- The thickness of sand cushing shall be measured punning down 18 cm.

M & L for old size sub class 'B' bricks,laid flat in trenches over the cable with length of brick perpendicular to the direction of the cable , adjacent/abutting each other complete all as specified

Supply installation, commissioning and testing at roof top of building 'Solar water heating system' indirect type with electric back as per manufacturer's recommendations of capacity 500 Ltr per day including suitable flat plate collectors having insulation of rock wool/mineral wool 50 mm thickness bottom and 25mm thickness on sides with toughened tempered glass of 4mm thick and cladding with aluminium sheet 26 SWG hot water storage tank of capacity 500 ltrs and of 20 guage thickness stainless steel plate (having insulation of rock wool) mineral wool 100mm thick and cladding with aluminium sheet 24 SWG cold water storage tank of capacity 1000 Ltrs incl necessary accessories, MS Structure work for water storage tank 1000 Ltrs with gun metal ball valve of suitable size high pressure with polythene float, with stands for collectors, staging of suitable height (for easy flow of water) including necessary PCC work for hot water and cold water tanks made out of 50x50x6mm angle iron complete with temperature guage 0 to 100 degrees centigrades brass gate valve in hot and cold water pipes horizontal type strainer on incoming water line and back up heater of capacity as per manufacturer's recommendations complete all as specified.

M & L for sub main wiring complete with 2 runs of 4 Sqmm single core PVC insulated FRLS cable 1100 volts grade multistranded copper conductor cable with 1 run of 4.0mm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through and including 25 mm or higher dia non metallic rigid PVC conduit and conduit accessories in wall/Ceiling etc all as specified and as directed. Note:- Three run wire shall be measured in one unit.

Supply and fix for SPN MCB DB 2 ways with 16 Amp MCB , 25 kA, 240 volt, 200 Amps rated bus bar 240Volt, single door type all as specified

Supply and Fix for bib taps cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe both ends 15 mm size of bore dia of valve in mm complete all as specified and as directed

Supply and Fix for steel water tubing galvanized 15 mm bore , medium grade ISI marked fixed on surfaces incl all pipe fiting fixing mtrl etc complete incl making good to all distrubed surfaces complete all as specified and as directed .

Supply and Fix for steel water tubing galvanized 25 mm bore , medium grade ISI marked fixed on surfaces incl all pipe fiting fixing mtrl etc complete incl making good to all distrubed surfaces complete all as specified and as directed.

Supply and fix for Gun metal gate valve of brass screwed down high pressure with iron wheel screwed for iron pipe both ends 15 mm size complete all as specified and as directed

Supply and fix for Gun metal gate valve of brass screwed down high pressure with iron wheel screwed for iron pipe both ends 25 mm size complete all as specified and as directed

Supply and fix for 10 sqmm 2 core PVC insulated armoured heavy duty eletric cable with aluminium conductor cable, 1100 volt grade complete all as specified and as directed