PROVN OF SOLAR LIGHT AT VARIOUS LOCATION CHAIN LINK FENCHING AT STP AND SPECIAL REPAIR TO BLDG NO P 251 AT MIL STN DHRAGADHRA

Amount

Excavating in trenches not exceeding 1.5m wide and not exceeding 1.5 m in depth for foundation of pole, laying of cables etc in hard and dense soil and getting out complete all as specified and directed.

Returning filling in, including spreading, leveling, watering and well ramming in layer not exc 25 cm with soil obtained from excavation complete all as specified and directed.

Excavating in post holes (or similar holes) in soft/loose soil each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed.

M&L for sand filling under floors or in foundation including watering and consolidation complete all as specified and directed.

Removing excavated material (Soil) not exc 50 mtr and depositing where directed at a level not exc. 1.5m above the starting point complete all as specified and directed.

M&L PCC (1:3:6) C-2 using 40mm graded stone aggregate as in foundation filling and mass concrete as in foundation filling and mass concrete all as completed as directed.

M&L for PCC 1:3:6 type C-1 using 20mm graded stone for embedding of hold fast etc complete all as specified and directed.

M&L for plain cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate for padestal/coping around poles, benching, bressumers, steps, incl necessary form work , finishing even and smooth without using extra cement, incl demolition of existing work complete all as specified and directed.

M&L, precast cement concrete Block Masonary with solid blocks type C1, 1:3:6 (20mm graded stone aggregate) exc 10 cm in width and setting in mortar 1:6 complete all as specified and directed .

M&L, precast cement concrete Block Masonary with solid blocks (except block) type C1, 1:3:6 (20mm graded stone aggregate) exc 10 cm in width and setting in mortar 1:6 complete all as specified and directed .

M&L for RCC 1:1.5:3 type A-1 as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like including demolition of existing RCC work in any position complete all as specified and directed.

Supply & laying sub class 'B' bricks for protection of cable and laid perpendicular to the trench all as specified & directed by Engineer-in-Charge.

M&L for walling of random rubble stone masonry, brought up to courses, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and directed.

M&L for walling of random rubble, except stone, uncoursed, well bonded, bedded and solidly hearted, built in CM (1:6) complete all as specified and directed.

Extra over stone walling for hammer dressing with maximum depression on face from straight edge held against the dressed surface n. exc 20mm for sand stone and dressing to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses completed as specified and directed.

M&L for use and waste of form work to soffit of suspanded slab such as roof slab ,floor slab landing and similar work n exc 200mm thick (horizontally or sloping complete all as specified and as directed.

Supply & Fix 35 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sqm each complete all as specified and directed.

Taking down chowkats or frames (without taking off shutters from the frame) exc 1.5 sqm and n.exc 4.00 sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and directed.

S&F, aluminium, anodised barrel tower bolts 200mm long of extruded section and fixed complete all as specified and directed.

S&F 300 mm long Aluminium alloy ,anodised sliding door bolt with hasp staple (bolt type ) and fixing clips of sheet ,cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed .

S&F, aluminium handles 150mm size, cast type, anodised complete all as specified and directed.

S&F Hat pegs, solid body 125mm to 175mm cast iron or mild steel fixed with brass screw and wooden/plastic cleats complete all as specified and directed.

S&F, Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. complete all as specified and directed.

S&F, brass chromium plated, tubular towel rail 20mm dia, D type, 60 cm long between flange, complete all as specified and directed.

S&F 150mm long floor door stopper of aluminum alloy body and tongue , anodized with hard drawn steel spring complete all as specified and directed

S&F galvanised mild steel wire cloth 0.56 mm nomonal dia of bar and 1.18 mm avrage width of aperture ,fixed with tined tacks or galvanised wire staples complete all as specified and as directed.

Supply and Fixing Angle iron as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc; flat iron fillets including all necessary drilling, bolting or rivetting etc and similar work confirming to Fe 290 Gd E-165. complete all as specified and as directed.

S&F M.S Framed work such as grills gratings etc with ends of bars sholdered and/or riveted into spikes ,framed guard bars /railings complete all as sepcified and directed.

Supply and Fixing mild steel screw bolts (machine made ) with hexagonal or square heads at one end, 5 to 10mm dia of neck , exc 5 cm & not exc 10 cm long, bolt with waher and nuts complete all as sepcified and directed.

M&L for MS round bars (Fe-410-W (Gde E-250) quality A or Fe-290 (Gde-E-165) 10mm dia and over cut to Length bent to shape required incl cranking, bending, spirally for hooping for columns with an incl MS wire(Annealed not less than .90 mm Dia) or securing with clips complete all as sepcified and directed.

M&L for TMT 6 to 8 mm dia bar, cut to length, bent to shape required, including cranking, bending, hooking ends, binding with and inlcuding mild steel wire (annealed) not less than steel wire 0.9mm dia or securing with clips and confirming to FE-410-S and 310-0) complete all as specified and directed.

S&F, rolled mild steel section as in main and cross beams hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding door fixed with angle cleats or other connecting plates conforming to Fe-290, Gde E-165 all as specified and directed.

M&L for rolled mild steel angle iron work as in door frames complete, drilled for fixing of hinges etc. also fastening and fixing conforming to Fe-290 (Gde-E-165) complete all as specified and directed.

M&L for Fixing only chain link fencing including line wires, any mesh, size and type fixed to any type of standards rails, straining bolts, etc.including provission of binding wire complete all as sepcified and directed.

S&F 1.25 mm thick Pressed steel frame size 105 x 60 for doors with one or more rebates including necessary fixing lugs, hinges ( 125 mm long-06 Nos & 75mm long - 2 Nos for each door ), lock strike plate, hold fast etc., including Frames shall be filled with PCC 1:3:6, type C-0 (12.5 mm graded stone aggregate) complete all as specified and directed.

Supply of 3mm dia GI wire chain link fencing with 75x75mm mesh size and fixed to any type of strandard rails straining bolts etc including provision of binding wire complete all as sepcified and directed.

S&F, in repair, pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet, 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M & L Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of an colour (as approved by GE) having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed.

S&F, standard aluminium section powder coated any colour as approved for door frames/ shutters, window, ventilator frames/shutters sliding three track/fixed/louvered and partition etc including jointing cleat and rubber beading/linning, pivot, locking arrangement and fixed in position with stainless steel screws all as specified and directed.

M&L for taking down , chipping and removing the loose, spailt, damaged cement concrete, cement mortor surfaces of RCC Columns, beams, walls, chajjah etc and exposing the reinforced cement , wire brushing and cleaning the exposed steel reinforced bar, applying rust remover over the cleaned re-bar surface wash the re-bar with clean water for removing all rusts from the old re-bar surfaces, fixing new reinforcement for strengthen the members as required, applying two coats of epoxy zinc primer on new and old steel surfaces, saturate the substrate with water applying one coat of polymer modified bond coat on affected concrete surfaces and finally providing polymer modified cement and quartz sand mortor in CM 1:3 mix , 40mm thk in two coats, using polymer SBR Latex or equivalent as approved @ 5 Ltrs per 50 Kg bag of cement complete all as per manufacturer's Specifications/instructions and as directed. Note :-( New reinforcement (Welded wire fabric) will be measured and paid separately) Make : Dr. Fixit/Sunanda/chemestik/Fosrok

M&L for 20mm thick Granite (of any type/colour) tiles machine cut in skirting/dado laid over cement screed and jointed with gray cement slurry, and pointed with grey cement slurry, and pointed with white cement and admixture of pigment to match with shade of granite stone including grinding andpolishing complete over 15mm thick screed bed in CM 1:6 incl moulding, chamgering of edges complete all as specified and directed.

M&L for 100mm thick PCC 1:2:4 type B2, using 40mm graded stone aggregate as in paving /hard standing/ path etc. finished even and smooth without using extra cement complete all as specified and as directed.

M&L for 50 mm thick PCC 1:3:6 type C1 using 20 mm graded stone aggregate as in plinth protection surface finished fair and even complete all as specified. Note :- Plinth protection shall be laid to slope (1 in 30) in bays not exceeding 3 metre in length and joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with sealing compound grade B.

M&L for 25mm Thick Cement Concrete Type B-1, 1:2:4 (20mm Graded Aggregate) complete all as specified and directed.

M&L, glazed joint free coloured ceramic tiles in vertical surface as in skirting & dado, 7 to 8 mm thick area exc 0.06 Sqm but n.exc 0.18 Sqm over and including 10 mm thick rendering in CM1:4 set & jointed in neat cement slurry & pointed in coloured cement to match complete all as specified and directed.

M & L, non skid ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 Sqm, in floors over and including 15 mm thick screed bed in CM 1:6 as in floor etc set & jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed

M&L, for machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658- 2006 of 60mm thickness, M-35 grade, with grey cement & pigment insertion filled with sand and bedded with and including 50mm thick sand cousion laid uniformly and duly compected with plate vibrator complete all as specified and directed.

M&L for dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as sepcified and directed.

M&L for 10mm thick rendering in CM 1:4 on ceiling, soffits, chajja projection etc complete all as specified and directed.

M&L for rendering 15mm thick in two layers consisting of 5mm in CM 1:4 over 10mm thick in CM (1:6) plastering on stone masonry surface and rendering is to be finished even and smooth without using extra cement complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:6 on stone masonry surface or surface other than fair face of brickwork surface finished fair and even without using extra cement complete all as specified and directed.

Taking down cement plaster on brick or stone wall etc. including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.

M&L for preparing of plastered or unplastered old decorated surfaces of walls by complete removal of existing treatment, moulds, moss and efflorescent salt and treating oil and greasy spot and applying three coat of white wash on walls including cornices etc complete all as specified and directed.

M&L for preparing new plastered or un-plastered ceiling surfaces and applying three coats of white wash complete all as specified and directed.

M&L for new plastered or un-plastered surfaces of finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied complete all as specified and directed.

M&L for two coats of exterior emulsion paint (weather coat of Berger or equivalent) over a coat of primer over a thin layer of external wall putty after complete removal of existing treatment complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying two coat of oild bound distemper over and including a layer of wall care putty to achive a smooth finish surface (average thickness 1mm) complete all as specified and directed.

M&L for preparation of old plastered surface by complete removal of existing treatment and applying two coat of oild bound distemper over and including a layer of wall care putty (average thickness 1mm) complete all as specified and directed.

S&F, 4.8 mm thick plain sheet glass, ordinary quality and glazing not exceeding 0.8 Sqm in each pane fixed with glass putty complet all as specified and directed.

S&F, figured glass pin head type (Figured glass), Sheet glass 4mm thick ordinary quality and glazing with oil putty or rubber and aluminium beading in squares n.exc. 0.5 sqm in each pane complete all as specified and directed.

M&L, preparing of new wooden surface exceeding 10 cm in width or girth and applying two coat of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

M&L for preparation of new steel surface of any description exc. 10cm width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.

M&L, preparing of new steel surface not exceeding 10 cm in width or girth and applying two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

S&F in 15 mm bore tubes medium grade galvanised with all fittings and fixed to walls, ceilings or laid concealed in floors incl cutting chases where required incl taking down 15 mm bore steel tubing and connections complete complete all as specified and directed

S&F in 20 mm bore tubes medium grade galvanised with all fittings and fixed to walls, ceilings or laid concealed in floors incl cutting chases where required incl taking down 20 mm bore steel tubing and connections complete complete all as specified and directed

Taking up or down 15mm steel tubing and connections, complete all as specified& directed by Engr-in-Charge.

Taking up or down 20mm steel tubing and connections, complete all as specified & directed by Engr-in-Charge.

Refixing old serviceable 15 mm GI tubing and connection in new or old position (concealed in Wall, ceiling & floor etc.) including necessary fittings & fixtures etc. complete all as specified and directed.

Refixing old serviceable 20 mm GI tubing and connection in new or old position (concealed in Wall, ceiling floor etc.) including necessary fittings & fixtures etc. complete all as specified and directed.

Dismantling water tanks of capacity not exc 1000ltr and removing to store complete all as specified & directed by Engr-in-Charge.

S&F Rotational moulded polyethylene water storage tanks of 1000 Ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified & directed by Engr-in-Charge.

S&F 15mm dia Brass CP bib cock cast copper alloy fancy type with long shank capstain head serewed down high pressure pipe in repairs complete all as specified and directed.

Supply & Fix in repair 15 mm dia pillar tap (long nose)cast copper alloy with capstan head chromium plated fancy type, screwed down high pressure, with or without lettered "Hot or Cold" with long swan neck swivel type screwed for iron pipe and fixed complete all as specified and directed.

S&F, in repair, 15mm, stop valve/angle valve, cast copper alloy, chromium plated, fency type with crutch or butterfly handle screw down, serewed for iron pipe or brass ferrule complete all as specified and directed.

S&F in repair 20mm Gate valves with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and as directed.

S&F, in repair, 20mm bore, ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete all as specified and directed.(Minimum weight -210 Gms) complete, all as specified and directed.

S&F, PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repairs, 110mm bore PVC(SWR) pipes single socketed , in any length with rubber ring joints, laid in floors complete all as specified and directed.

S&F, in repairs, 75mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints laid in trenches or in floors and fixed to walls with PVC holdingg with suitable mild steel angle clamps complete all as specified and directed.

S&F, 110mm bore PVC (SWR) bend, any radius complete all as specified and directed.

S&F, 75mm PVC (SWR) vent cowl complete all as specified and directed.

S&F in repairs, 125/110mm bore PVC (SWR) 'P' trap complete all as specified and directed.

S&F PVC (SWR) nahani trap, with chromium plated grating including jointing with solvent cement, dia of outlet 75mm complete all as specified and directed.

S & F in repairs white glazed earthen ware vitreous china wash hand basin of size 550x400mm with and including CI brackets, 32mm bore brass CP waste coupling Inlet/ outlet, PVC flexible pipe, 600mm size for 15 mm bore pipe with brass nut and washers etc complete.

S&F, vitreous china urinal, Half stall type, white (excluding flushing pipe) incl providing and fixing plug, bedding urinal against wall in CM (1:2), securing urinal to plugs with and incl 60mm long brass screws, pointing around urinal back in cement, fixing flush pipe, gratings and union for discharge pipe incl supply and fixing of 32mm bore 60mm long discharge pipe complete all as specified and directed.

S&F, in repair, 10 litres capacity, valveless, syphonic action type, flushing cistern, including 32mm dia PVC flush pipe complete all as specified and directed.

S&F, vitreous china wash down water closet pan (pedestal pattern), white (excluding flushing cistern) including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc. including seat cover in same colour etc. complete all as specified and directed.

S & F Soap dish chromium plated approximate size 160x 160x90mm complete all as specified and directed.

S&F, 5.5mm thick glass shelf of size 600mm long fency type fixed and including chromium plated grills, screws and wooden/plastic cleats complete all as specified and directed.

S&F, 5.5mm thick glass corner shelf assembly fancy type of size 250mmx250mm fixed with and including chromium plates brass screws and wooden/plastic cleats complete all as specified and directed.

Demolition of precast concrete articles and pre-cast cement concrete block walling, ashlar fencings, dressed stone work including all quoins, arches, pillars etc. built in cement mortar complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and directed

Demolition of plain cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Dismantling of Asbestos cement (corrugated, semi corrugated, etc) sheet in roof covering

Taking down carefully unserviceable copper/aluminium point wiring (Light, fan, socket or power) complete including unserviceable fittings and fixtures such as switches, ceiling roses, pendents, regulators, sockets, lamp holders, brackets, except ceiling fittings, bulk head fittings, tube light fittings etc. and making good the disturbed surfaces of walls, floors, etc. complete all as specified and directed.

M&L for point wiring for PVC conduit concealed in brick or stone wall using FRLS PVC sheathed multistrand copper conductor wire 1.5 sqmm single core including modular white cover plate with frame of suitable modules over modular metal flush box concealed type for earth continuity insulated PVC unsheathed (green colour) 1.5 sqmm copper earth wire connected to common earth dolly using complete all as specified and directed by Engr-in-charge for the following :-

(a) One light/fan/bell point controlled by one switch

(b) One 6 Amp socket outlet on independent board.

(c) One 6 Amp socket outlet on same board.

M&L for point wiring for one light/fan/bell point controlled by one switch one way in & including PVC conduit concealed in brick or stone wall using FRLS PVC unsheathed multistrand copper conductor wire 2.5 sqmm single core for one light/fan point controlled by one switch including modular white cover plate with frame of suitable modules over modular metal flush box concealed type for earth continuity insulated PVC unsheathed (green colour) 2.5 sqmm copper earth wire connected to common earth dolly using complete all as specified and directed by Engr-in-charge for for 6/16 Amp independent socket.

S&F, in repair, lamp holder insulated body with back plate for battern fittings complete all as specified and directed.

S&F modular switch one way 16 Amps flush type 230 volts complete all as specified.

S&F modular bell push 6 Amps, 1 module complete all as specified and directed.

S&F, in repairs, bell, A.C. 230 Volts, single pole, Ding doll, complete all as specified and directed.

S&F modular socket outlet 3 pin 6 & 16 Amps flush type 230 volts complete all as specified.

S&F ceiling rose 3 terminal size 50x65mm surface type 230 volts complete all as specified.

S&F, modular fan step type regulator, suitable for 1200mm/1400mm sweep ceiling fan, 2 module complete all as specified and directed.

S&F modular switch piano, flush type 6 Amps one way 230 volts complete all as specified.

S&F modular socket 3 pin 6 Amps flush type 230 volts complete all as specified.

S&F Distribution Board VTPN, 4 way, 415 volts, factory made powder coated, double door with neutral and earth link, including 3 pole MCCB 100 Amps rating, 16KA breaking capacity for incoming supply and provision of MCB SP/TP for out going supply complete all as specified and directed.

S&F 30W New generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high efficient LED as lighting source and PC cover having TOP Opening seperate driver compartment with IP66 protection and impact resistance of IK07 for bldg security light with GI pipe bracket of suitable size for fitting complete all as specified and directed by Engineer-in-charge. Make Havells/Bajaj/Philips/Crompton

Taking down carefully old unserviceable main switches/ Distribution board any type including fuses MCB etc after removing all connection, wires and making good the disturb surface complete all as directed by Engineer-in-charge.

M&L for cutting exsiting road/PCC/drain for laying of underground cable and including necessary earth work and making god to match with the existing surface with PCC 1:3:6 type CI using 20 cm graded aggregates complete all as specified and directed.

Supplying & laying, XLPE insulated, PVC inner sheathed, armored with galvanized steel strip or wire heavy duty underground cable with aluminium multi stranded conductor, 1100 volt grade of size 16 Sqmm 4 core, laid in trenches/duct, passing through pipe/duct or fixed on pole and connecting and testing complete all as specified and directed.

S&F Sheet metal enclosure double door for DB's SPN 8 way 240 V having 200 A rated bus bar complete all as specified and directed by Engr-Incharge.

S&F ceiling fans 1200mm sweep energy efficient five star rated 230 volts with brushless direct current motor (BLDC) with blades, down rods, electronic regulator control type and accessories with brushless direct current motor (BLDC) including down rods and connecting up with 3 runs of suitable size single core PVC insulated but unsheathed, FRLS cable with multistranded copper conductors from ceiling rose to fan complete all as specified and as directed.

S&F, steel water tubes with rubber gasket at end of each pieces of pipe, light grade, galvanized, with all fittings of size 40mm dia laid in floors/trenches/fixed with poles for protection of cable complete all as specified and directed.

S&F, single pole and earth enclosure with a two pin and earth plug with socket complete with one single pole MCB 20 Amp complete all as specified and directed.

Taking down carefully old unsv submain wiring of any type/any size with PVC conduit or casing caping complete all as specified and directed.

M&L for Sub main wiring complete with FRLS PVC insulated unsheathed stranded copper conductor wire 4.0 Sq mm 02 runs (for Phase & Neutal) along with earth wire FRLS PVC insulated unsheathed stranded copper conductor wire of size 4.0 sq mm wire drawn through in & including PVC concealed conduit complete all as directed by Engr-In-charge. Note: (i). 2 run of main conductor and one run of earth conductor shall be measured as one length.

S&F MCB SPN 32A, 240 V -10 KA all as specified and as directed by Engineer-in-charge.

S&F MCB SP 6-32A, 240 V -10 KA all as specified and as directed by Engineer-in-charge.

S&F, LED flat panel of size 2' x 2', 36 Watts, environmental friendly, new generation, aesthetically designed, ultra modern recess mounting luminaire with high brightness of white/warm white in colour, SMD LEDs as light source, suitable for Armstrong/Grid ceiling complete all as specified and directed by Engr-in-charge. Make Havells/Bajaj/Philips/Wipro

S&F LED compact fitting/batten for single LED tube of 1x20W, 220V, AC decorative box type 4ft with integral LED driver including 20W, T8 tube rod complete all as directed by Engr-In-charge.

Supply and fixing LED Solar street light fitting 50 Watt all-in-one solar street light with PIR sensor luminaire effect 120im/w beam angle 135x85 with 2 year warranty , high efficiency mono crystallianty solar PV module ,lithium ferro phosphate battery with in built BMS technology , high efficency LED, MPPT Solar charge controller and aluminium extruded body & specially progrmmed to automatically control the dimming and brightness of light which increases the backup time make bajaj cat part no SUNSOKO AIO- BSZSL 50W LED or equivalent toHavells/ philips

S& F 06 Meter Octagonal pole with galvanized steel, top and bottom 70/130 mm dia with minmum 3mm thickness fixing on foundation including suitable size nut bolts and foundation plate, and steel rod as per OEM recommended all as completed as engineer in charge Note:-earth work and PCC measure and paid in relevent Item

Supply and fix of exhaust fan, 250 mm sweep, PVC body, AC single phase, 230 volts with, alongwith louvers and blades including connection with 0.5 sqmm multistranded copper conductor flexible wire from ceiling rose, necessary fixing arrangement i.e anchor nut, bolt, washer, grouting and making good to disturbed surface complete all as specified and as directed. Make : Crompton/Havells/Khaitan/Almonard/Bajaj

S&F, LED compact fitting, decrative fancy type with bracket and mounting arrangement thin size powder coated 10/12 Watt for soft diffuser lighting and connecting up complete with white three core flexible copper conductor cable of suitable size complete all as specified and as directed.

M&L for earthing complete with galvanized steel earth plate electrode of 60 cm x 60 cm x 6mm thick buried directly in ground [earth pit not less than 2.25 metre deep below normal ground level] with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanized earth Lead 4 mm by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No. 3 of MES SSR Part I connected to DB using earth wire of 4mm dia as earth lead all as specified and testing on completion including provision of earth lead protected by 20 mm dia light grade GI pipe & watering pipe shall be 15 mm bore medium grade GI pipe including all excavation and earth work in any type of soil, PCC pit with RCC cover, char coal, salt, funnel etc complete. Note : Rate quoted by tenderers shall be deemed to include for following provisions:-[i]. Excavation & earth work in any type of soil including removing of surplus material upto 50 M.[ii]. PCC 1:3:6 type C1 using 20mm graded stone aggregate in pit & 40mm thick precast RCC 1:2:4 type B1 cover 50x50 cm with 8mm TMT bars @ 10 cm C/C both ways with handles.[iii]. Main earthing lead from earth electrode to test point upto 7.5 mtr.[iv]. Funnel with watering pipe [GI pipe] 15 mm bore [ISI marked] medium grade & copper lugs, charcoal & salt as reqd.[v]. GI protection pipe of size 20 mm bore light grade 7.5m.

Bhumi Construction (BID ID -3373444)

partechengineers (BID ID -3378187)