Rate contract for SITC of Valves and accessories of HVAC System for the period of 02 years at SVP Hospital within Limit of Rs.10.00 lacs.

(Technical Bid only) of Mezzanine Floor, Block-B, Sardar Patel

Tender in Physical form Bhavan, Danapith, Ahmedabad-380

001,Gujarat,India.

4 Tender Vol-I (Technical Bid Dt.04/02/2026 at 4:05 p.m. onwards

only) Opening Date-Time Online Opening:-At the Office of Additional

and Place Chief Engineer (Electrical), Light

Department,5th Floor “C”-Block, Sardar Patel

Bhavan, Danapith , Ahmedabad-380

Gujarat, India.

Physical Opening :-At the Office of Tender

Officer, Central Record Office, Mezzanine

Floor, Block-B, Sardar Patel Bhavan,

Danapith, Ahmedabad-380 001,Gujarat,India

or at the above said office

Note:- The height of Hospital

MUNICIPAL Building is approx. 78 mtr. (02

Basements + Ground + 18 Floors)

Ahmedabad If Corporation

Municipal scaffolding is required

during the execution of works

Sardar at Bhavan,Danapith

Patel the site, the contractor shall

Ahmedabad - 380

Price Bid for Rate contract for SITC of Valves and accessories of HVAC System for the period of

years at SVP Hospital within Limit of Rs.10.00 lacs.

Cost of Cost of

Item Description Unit Qty Materials Labour in

INSULATED VALVES

Providing and erecting BUTTERFLY VALVE

(MANUAL) with C I body SS Disc, Nitrile Rubber Seal

& O- Ring PN 16 pressure rating for chilled water/hot

eater circulation as specified

Providing and erecting BALANCING VALVE WITH

BUILT IN MEASURING FACILITY with C I body

flanged construction with EPDM coated disc with long

pitch with protected out pipe insulation & PN

pressure rating for chilled / hot water circulation as

Providing and erecting NON - RETURN VALVE

with duel plate of C I body SS plates vulcanized

3 NBR seal flanged end & PN 16 pressure rating for

chilled / hot water circulation including insulation as

Supply, installation, testing and commissioning of Y Ea. 1 63500.00 3500.00

type strainers with SS Mesh for following sizes with

matching flanges, bolts, supports etc. The strainers shall

be insulated with loose TF quality thermocole for a layer

of 50 mm thickness and finished as per chilled water

insulation. 200 mm dia

Providing and fixing in position the industrial type Ea. 1 1170.00 94.00

5 pressure gauges with gun metal / brass valves complete

Providing & fixing in position the mercury in glass Ea. 1 1027.00 94.00

6 industrial type thermometers.

VALVES WITHOUT INSULATION

Providing and erecting BUTTERFLY VALVE

7 (MANUAL) with C I body SS disc nitrile sheet & O -

ring & PN 16 pressure rating as specified.

Providing and erecting NON - RETURN VALVE

with dual plate of C I body SS plates vulcanized

NBR seal flanged end & PN 16 pressure rating as

Supplying, fixing, testing and commissioning of

following sizes Motorized Butter fly Valve with CI

Body, SS Disc,O - ring and minimum PN-16

pressure rating, conforming to BS 5155, IS 13095, with

IP-55 actuator, capable of accepting upto 10V DC, and

upto 20mA electric signal and providing similar

transduced feedback output to control system as

Supply, Installation, Testing and Commissioning of

following sizes electronic, self-balancing, pressure

independent type dynamic balancing valve with

integrated 2 way modulating control valve in a single

body. The actuator shall be capable of accepting upto

10 10V DC and upto 20mA electric signal and shall

provide similar transduced feedback output to control

system. Maximum close off pressure shall not be less

than 6 Bar for upto 50 mm valves and 7 Bar for 65 mm

& above. Valves should have pressure rating of 25 Bar

Supplying and fixing of following thickness duly

laminated aluminium foil of mat finish closed cell

Nitrile rubber (Class "O") insulation on existing duct

11 after applying suitable adhesive for Nitrile rubber.

The joints shall be sealed with 50 mm wide and 3 mm

thick self adhesive nitrile rubber tape insulation

complete as per specifications and as required.

Basic Amount in Rs.

Total Amount with GST @ 18% in Rs.

Total Amount with GST @ 18% in Rs.

Note:- The height of Hospital Building is approx. 78 mtr. (02 Basements + Ground + 18 Floors) If

scaffolding is required during the execution of works at the site, the contractor shall arrange

and provide the same at their own cost. No extra payment will be made to contractor for

I/We am/are willing to carry out work at % Above or % Below the estimated cost mentioned

above. The amount of my/our tender works out as under Estimated cost put up to tender:-

Rs. 934086.82 _________%Above:-Rs. OR Deduct ______% Below:-Rs.

NOTE:- (1) The Quoted Rate shall be inclusive of all taxes.

Signature of the Tenderer