Loading
Loading…
Loading…
| # | Schedule | Awarded To | Bids | Value |
|---|---|---|---|---|
| 1 | Supply of Rubberised coir mattresses of overall size of 1905 mm x 915mmx 100 mm with 25 mm thick top layer of polyurethane foam with a density not less than 27 Kg/cum as per IS 7933-1975 over 75mm (3 inches) thick coir base with an inner protective cover and outer PC cloth of 120 gsm. The coir mattresses should be standard and approved make, best quality confirming to IS: 8391:1987 with ISI mark and the density of coir should be FIRM grade standards. The weight of coir mattresses should be 11.84 kg (including PC cloth cover) minimum etc., complete as directed by the department. (Excluding GST) | GOPI KISHAN ENTERPRISES | 2 | ₹55,500 |
| 2 | Supply of Co-polymer poly - propylene. Plastic moulded chairs with arms of confirming to IS : 13713-1993 specification and not less than the following physical parameters. (a) Seat height from floor level measured at centre 430 mm, (b) Seat width and depth at middle place are 410 mm and 420 mm respectively, (c) Bank rest width and height 285mm and 390 mm respectively, (d) Total weight of plastic chair: 2.58 kg (Excluding GST) | GOPI KISHAN ENTERPRISES | 2 | ₹1.4 L |
| 3 | Supply of Co-polymer poly - propylene. Plastic moulded chairs with out arms of confirming to IS : 13713-1993 specification and not less than the following physical parameters. (a) Seat height from floor level measured at centre not less 440 mm. (b) Seat width and depth at middle place are 410 mm and 380 mm and above respectively. (c) Bank rest width and height 490 mm and height 460 mm respectively. (d) Total weight of plastic chair: 2.29 kg. (Excluding GST) | GOPI KISHAN ENTERPRISES | 2 | ₹68,000 |
| 4 | Supply of MS steel cot of size 1905 mm (L) x 915mm (W) x 390 mm (H) height made with 16 gauge CR sheet (IS: 513-2008) at top (Size of CR sheet including crimp on four sides: 2055 mm x 1065 mm) and legs are made with MS square pipe of size 40mm x 40mm x 2.60mm (Confirming to lS:4923: 1997). The head board, leg board of top and bottom horizontals is made with MS and verticals made with MS pipe of 25 mm dia 18 gauge (confirming to lS 3601 : 2006). 3 nos of vertical MS pipes of 20 mm dia with 18 gauge are to be provided at head board side. The bottom side of the cot should be welded with 2 nos of MS tube of size 50 mm x 25 mm x 2.60mm (Confirming to IS 4923: 1997) and 2 nos MS square pipe of 25 mm x 25 mm x 2.00mm (Confirming to lS 4923 : 1997) two sides (Head board and leg board side) Suitable PVC bushes to be provided for legs at bottom. Finish: Epoxy powder coating 50 to 60 microns thick with primary process of degreasing, derusting, phosphate and passivation and secondary process of application of Epoxy polymer by Electrostatic process and curing under heat in ovens confirming to lS Standards.Colour Finish: As directed by the department. (Excluding GST) | SREE SAINATH ENGINEERING WORKS | 2 | ₹1.4 L |
| 5 | Supply of polyester fibre pillows of overall size 17 inches x 27 inches along profile filling with HBPL -1 (High Bulk Pillow, Grade-1) fibre (7D, 64mm) filling weight not less than 650 grams net, the fabric should be 110 Grams / Sqm etc., The rate including all taxes and other incidental charges etc., complete. (Excluding GST) | GOPI KISHAN ENTERPRISES | 2 | ₹9,460 |
Tender Value
₹10.7 L
Closing Date
5 May 2022, 3:00 pmClosed
Executive Engineer, RWS&S Division, Tenali
Supply of Furniture to T.T.D., Kalyanamandapam at Visakhapatnam of Visakhapatnam District
433017
Nit No.726/ATO/2021-22
OPEN - NCB
Goods
Andhra Pradesh
20 May 2022
13 Aug 2021
stage.html
html • 0.02 MB
aoc.html
html • 0.02 MB
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.02 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .