Replacement of Pipeline near Errabali Cheruvu at UCIL and other habitations in Pulivendula Mandal of YSR Kadapa District

Construction of pipe line for water supply with 300mm dia DI K9 (centrifugally cast ductile iron S/S pipe asper IS 8329/2000 for the following sizes as per IS:12288:1987 with its amendments and revisions including supply of pipes with rubber gaskets as per IS: 12820/89 including inside cement mortar lining and outside zinc coating, mechanical joints asper IS: - 13382-1992 and jiffy joints and as per technical specifications as per requirements, lowering,laying and jointing of pipe lines true to alignment and gradient,trench excavation (Earth work exacation in all soils upto SDR using machine with 2/3 rd and manual with 1/3 rd) for pipelines in all soils except rock requiring blasting and refilling trenches with excavakted earth (other than rocky soils and boulders) with watering and tamping and removing surplus earth from site of work and filling the pipeline with water and hydro-testing to the required pressure etc., complete for finished item of work as per the standard secifications and as directed by the departmnet engineers . The rates are inclusive of cost and conveyance of all aterisl and labour chages etc., complete for finished item of pipelie work but excluding GST and Seigniorage charges.300mm dia DI K9 Pipes

Cost, Supply, Delivery and fixing of (P.N.1.60) Tamper Proof DI Flanged Single Chamber Air Release Valves with body & cover made of Ductile Iron Grade GGG-40/SG-400/15 or GGG-50/SG- 500/7 or Equivalent as per IS1865, IS:3896- 2 with Food Grade Epoxy Powder Coating(EP-P) (Min:250 Micron) inside and Outside of Color Blue RAL 5005. All internal parts such as Float, shell, Cove Bolts etc. made of Austenitic alloy steel of SS AISI 304/316 and DN 50 float of and other components with ABS/PTFE/EPDM/NBR and generally conforming to DIN/BIS/AWWA standards (or) combination Flange drilling as per IS - 1538 and exclusive of all taxes and including Transportation, CI air tee of 250x250x80 mm dia, 250 mm CI D/F Pipe 0.60 mts long 2 No.s, 80mm dia CI Pipes 2.00 Mts Long, MTA, MS thereaded flanges, jointing meterials such as bolts nuts and, rubber washers meterials cost for main line and air valves fixing, labour charges for fixing of CI Pipes and tees and fixing of vlaves, etc., completed. 80 mm dia on 300mm dia DI Pipelinle

Construction of pipe line for water supply with 300mm dia DI K9 (centrifugally cast ductile iron S/S pipe asper IS 8329/2000 for the following sizes as per IS:12288:1987 with its amendments and revisions including supply of pipes with rubber gaskets as per IS: 12820/89 including inside cement mortar lining and outside zinc coating, mechanical joints asper IS: - 13382-1992 and jiffy joints and as per technical specifications as per requirements, lowering,laying and jointing of pipe lines true to alignment and gradient,trench excavation (Earth work exacation in all soils upto SDR using machine with 2/3 rd and manual with 1/3 rd) for pipelines in all soils except rock requiring blasting and refilling trenches with excavakted earth (other than rocky soils and boulders) with watering and tamping and removing surplus earth from site of work and filling the pipeline with water and hydro-testing to the required pressure etc., complete for finished item of work as per the standard secifications and as directed by the departmnet engineers . The rates are inclusive of cost and conveyance of all aterisl and labour chages etc., complete for finished item of pipelie work but excluding GST and Seigniorage charges.300mm dia DI K9 Pipes

Cost, Supply, Delivery and fixing of (P.N.1.60) Tamper Proof DI Flanged Single Chamber Air Release Valves with body & cover made of Ductile Iron Grade GGG-40/SG-400/15 or GGG-50/SG- 500/7 or Equivalent as per IS1865, IS:3896- 2 with Food Grade Epoxy Powder Coating(EP-P) (Min:250 Micron) inside and Outside of Color Blue RAL 5005. All internal parts such as Float, shell, Cove Bolts etc. made of Austenitic alloy steel of SS AISI 304/316 and DN 50 float of and other components with ABS/PTFE/EPDM/NBR and generally conforming to DIN/BIS/AWWA standards (or) combination Flange drilling as per IS - 1538 and exclusive of all taxes and including Transportation, CI air tee of 250x250x80 mm dia, 250 mm CI D/F Pipe 0.60 mts long 2 No.s, 80mm dia CI Pipes 2.00 Mts Long, MTA, MS thereaded flanges, jointing meterials such as bolts nuts and, rubber washers meterials cost for main line and air valves fixing, labour charges for fixing of CI Pipes and tees and fixing of vlaves, etc., completed. 80 mm dia on 300mm dia DI Pipelinle

DRILLING OF BOREWELL:-

Drilling of 165 mm dia Bore well with power rig including flushing to the clear in all starta ,hard rock loose soil, inserting 175 mm dia MS casing pipe etc. complete Up to 90.00 Mts

Cost, Supply and Fixing of 225 mm dia PVC 6Kg/Cm2 extra casing pipe for borewells for potable water supply conforming to IS: 4985/2000 and amendments from time to time including transportation etc., complete

Geologist Charges for Borewell

Cost, Supply and Transportation of 7.50 HP- 5 Stages 5star rated submersible pumpset, confirming to IS 8034 and motor confirming to IS 9283 with water proof winding,Pump shall be suitable for various delivery head and discharge with stainless steel shaft.Motor suitable for working on 415V ± 10% , Three Phase 50 Hz AC supply,etc complete for 6" Bore well.

Fabrication ,transportation and and supply of wall mounted control panel board of size 600x600x250mm made of 18 SWG CRCA sheet steel enclosure, 14 SWG mounting plate for cable entry fabricated , painted with two coats of Red oxide primer and two coats of Grey paint, lock and key arrangements two side lovures with weld mesh inside etc., complete consisting of the following equipment with all internal wiring using L&T / Finolex copper FRLS cables of suitable size and capacity and cable clamp etc complete for 3 phase motor pump sets. Voltmeter ; 0-500 V 96x96mm size. Makes: L&T / C&S / SALZAR / HPL/ AEI / Meco / Rishab - 1No 0 to 20 Amps / 0 50 Amps Ammeter (96x96mm size). Makes: L&T / C&S / SALZAR / HPL/ AEI / Meco / Rishab- 1No Single phase preventor of suitable range Makes: L&T / Minilec / Powertec. - 1No. 32 A TP, 10KA MCB. Makes: Legrand / Schneider / - 1No Indication lamps (R-Y-B) with switch control - 1set Voltmeter & Ammeter selector switch - 2 Nos Supply and fixing of ISI Mark suitable capacitor Makes: L&T / Siemens / Schneider / Epcos/Havells From 7.50 HP with Automatic Star Delta Starter of Make C&S/Crompton / L&T / Siemens/BCH.

Cost, Supply and Fixing of 50 mm dia GI 'B' Class Pipes including cost of specials and conveyence of all materials etc., complete

Cost, Supply and Fixing of 65 mm dia GI 'B' Class Pipeline including cost of specials and conveyence of all materials and labour charges etc., complete

Cost, Supply and Run of 3 Core 4.00 Sqmm Flat Copper cable of ISI for Submersible Motors confirming to IS:694:1990 including laying charges as per standard specifications .

Cost, Supply and Fixing of Gun Metal Non Return Valve including cost and conveyenc eof all materials and all labour charges etc., complete

Earth Work excavation of trench size 0.70x1.00 Mts in O.G.Soils ture to alignment and gradient for 90 mm dia at 6Kg/Cm2 PVC Pipeline and refilling the trench with excavated earth including cost and conveyance of all labour charges etc., complete with 2/3rd Machinary and 1/3rd Manual Etc., complete

Earth Work excavation of trench size 0.70x1.00 Mts in O.G.Soils ture to alignment and gradient for 110 mm dia at 6Kg/Cm2 PVC Pipeline and refilling the trench with excavated earth including cost and conveyance of all labour charges etc., complete with Manual Etc., complete

Earth Work excavation of trench size 0.70x1.00 Mts in O.G.Soils ture to alignment and gradient for 90 mm dia at 6Kg/Cm2 PVC Pipeline and refilling the trench with excavated earth including cost and conveyance of all labour charges etc., complete with Manual Etc., complete

Cost, Supply and Fixing of 65 mm dia GI 'B' Class Pipes including cost of specials and conveyence of all materials and labour charges etc., complete

Cutting open C.C.road surface with concrete saw cutter and removal with breaker including stacking of excavated materials for pipeline trench work including labour charges, all leads, lifts and conveyance of all materials etc., complete as directed by the deparmental officers.

Supply, delivery, laying and Jointing of Single Chamber DI Air Valve ( PN 1.60) with Body and cover in Ductile Iron of grade SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions. All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per IS:1538 on pipe line including supply of Air valve ,CI Specials to suit the pressure class of pipe etc.complete as specified in Technical specifications in (PartB - Volume I) drawing in (Part C - Volume 1). The rates are inclusive of cost and conveyance of all materials & specials and construction of RCC valve chambers as per requirement with RCC slab and RCC manhole cover with locking arrangements etc.complete for finished item of work , but excluding GST . 80 mm dia PN 1.6 Air Valves on 250 mm dia Pipeline

Supply, delivery, laying and Jointing of Single Chamber DI Air Valve ( PN 1.60) with Body and cover in Ductile Iron of grade SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions. All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per IS:1538 on pipe line including supply of Air valve ,CI Specials to suit the pressure class of pipe etc.complete as specified in Technical specifications in (PartB - Volume I) drawing in (Part C - Volume 1). The rates are inclusive of cost and conveyance of all materials & specials and construction of RCC valve chambers as per requirement with RCC slab and RCC manhole cover with locking arrangements etc.complete for finished item of work , but excluding GST . 50 mm dia PN 1.6 Air Valves on 200 mm dia Pipeline

Supply, delivery, laying and Jointing of Single Chamber DI Air Valve ( PN 1.60) with Body and cover in Ductile Iron of grade SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions. All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per IS:1538 on pipe line including supply of Air valve ,CI Specials to suit the pressure class of pipe etc.complete as specified in Technical specifications in (PartB - Volume I) drawing in (Part C - Volume 1). The rates are inclusive of cost and conveyance of all materials & specials and construction of RCC valve chambers as per requirement with RCC slab and RCC manhole cover with locking arrangements etc.complete for finished item of work , but excluding GST . 100 mm dia PN 1.6 Air Valves on 110 mm dia Pipeline

Supply, delivery, laying and Jointing of Single Chamber DI Air Valve ( PN 1.60) with Body and cover in Ductile Iron of grade SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions. All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per IS:1538 on pipe line including supply of Air valve ,CI Specials to suit the pressure class of pipe etc.complete as specified in Technical specifications in (PartB - Volume I) drawing in (Part C - Volume 1). The rates are inclusive of cost and conveyance of all materials & specials and construction of RCC valve chambers as per requirement with RCC slab and RCC manhole cover with locking arrangements etc.complete for finished item of work , but excluding GST . 40 mm dia PN 1.6 Air Valves on 90 mm dia Pipeline

Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves PN 1.6 (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 including all taxes, duties , complete and lowering, laying and fixing the valve in the pipeline including necessary specials, jointing materials, etc., including construction of RCC valve chamber of departmental approved size as per the design and drawings, etc.complete for finished item of work as per the standard specifications and as directed by the department Engineers. The rates are inclusive of cost and conveyance of all materials and labour charges and all taxes, duties and levies for finished item of work, but excluding GST for Pumping mains. 200 mm dia Sluice valves on 200 mm dia DI Pipeline

Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves PN 1.6 (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 including all taxes, duties , complete and lowering, laying and fixing the valve in the pipeline including necessary specials, jointing materials, etc., including construction of RCC valve chamber of departmental approved size as per the design and drawings, etc.complete for finished item of work as per the standard specifications and as directed by the department Engineers. The rates are inclusive of cost and conveyance of all materials and labour charges and all taxes, duties and levies for finished item of work, but excluding GST for Pumping mains. 100 mm dia Sluice valves on 110 mm dia PVC Pipeline

Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves PN 1.6 (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 including all taxes, duties , complete and lowering, laying and fixing the valve in the pipeline including necessary specials, jointing materials, etc., including construction of RCC valve chamber of departmental approved size as per the design and drawings, etc.complete for finished item of work as per the standard specifications and as directed by the department Engineers. The rates are inclusive of cost and conveyance of all materials and labour charges and all taxes, duties and levies for finished item of work, but excluding GST for Pumping mains. 80 mm dia Sluice valves on 90 mm dia PVC Pipeline

Cost, Supply and Fixing of CI 200 mm dia Class-B Pipes including cost of specials and conveyence of all materials etc., complete

Cost, Supply and Fixing of CI 80 mm dia Class-B Pipes including cost of specials and conveyence of all materials etc., complete

Cost, Supply and Fixing of Bolts & Nuts including cost and conveyence of all materials etc., complete

Cost, Supply and Fixing of Rubber Packing including cost and conveyence of all materials etc., complete

Providing Ornamental Grill including Structural Steel and Welding charges including cost and conveyence of all materials and labour charges etc., complete

White washing in two coats with white cement to give and even shade after throughly brushing the surface to remove all dirt and remains of loose powdered materials including cost and conveyance all materials and all labour charges etc complete., and Painting with snowcem are other equal and approved water proof cement paint two coats over priming coat including cost and conveyance of all materials and all labour charges etc., complete.

Providing Fencing For Transformer and CT-PT meter, Earthing for Pump House and Internal Lighting in Head Works Dozer (D 50) for clearing the site in head works including all labour charges etc., complete

Earth Work excavation and depositing on bank with an initial lead of 10 m and 2 m lift in loamy clayey soils including all labour charges.

Brick Masonry in superstructure with CM (1:6) prop: using Flyash bricks of size (290x225x140) from approved source having minimum crushing strength of 50 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, including seigniorage charges, & other taxes on all materials, all operational, incidental and labour charges such as mixing cement mortar, constructing masonry, scaffolding charges, lift charges, curing, etc., complete for finished item of work.

Cement Plastering 12mm thick in CM (1:5) dubara sponge finish including cost and conveyance of all materials like cement, sand, water etc., to site, seigniorage charges, sales & other taxes on all materials,all operational, incidental and labour charges such as mixing mortar, scaffolding charges, lift charges, including cutting of Grooves wherever necessary as directed by Engineer - in - charge, finishing, curing, etc., complete for Even Surfaces of Wall for finished item of work. (APSS 901,903 & 904) inside & outside

Cement Concrete ( 1:2:4) using 20 mm HBG crushed metal including cost and conveyance of all materials and all labour charges etc complete.

Spreading of 40 mm HBG metal of including cost and conveyance of all materials and all labour charges etc complete.

Providing Independent earthing for important equipment with 100 mm dia Heavy guage C.I. (Cast Iron) pipe with flange 2.5m long enclosed in CC Brick masonry chamber of 450X450X400 mm with RCC Slab cover duly providing staggered holes filling with salt and charcoal from the bttom of the pipe giving earth connection from electrode through G.I. strip of 40X6X200 mm length will all accessories and labour charges etc., complete

Supply and Fixing of MS Structural Steel like plates including welding charges, including cost and conveyance of all materials and all labour charges etc complete.

Supply and transportation of 150 W LED Street light Luminaire made of pressure diecast alluminium body with powder coated, having protective toughned glass, Supply Input voltage 120 - 270 V AC, P.F > 0.90, high power LED's having System efficacy > 95 lm/W and junction temprature < 70°C, with Ingrees protection IP65, Luminaire performance complies to IS 10322 (Part 5 / Sec-3), Driver surge protection 4KV, external Surge protection ≥ 5KV with optics distribution etc., complete

Supply and transportation of 2C X 1.50 sqmm XLPE/PVC insulated & PVC sheathed armoured cables of 1.1 KV grade with copper conductor as per IS:7098 Part-I-1988 with all accessories including labour charges etc., complete

Earth Work excavation and depositing on bank with an initial lead of 10 m and 2 m lift in loamy clayey soils including all labour charges.

Cement Concrete ( 1:2:4) using 20 mm HBG crushed metal including cost and conveyance of all materials and all labour charges etc complete.

Lifting of existing Shud and transporting to other location by using crane of capacity of 3 tonnes including cost and conveyance of all materials and all labour charges etc complete.

Cutting open C.C.road surface with concrete saw cutter and removal with breaker including stacking of excavated materials for pipeline trench work including labour charges, all leads, lifts and conveyance of all materials etc., complete as directed by the deparmental officers.

Supply and Fixing of MS Structural Steel like plates including welding charges, including cost and conveyance of all materials and all labour charges etc complete.

Supply of 1200 mm (48") sweep 230V, A.C 50 Hz.Ceiling Fan with 3 Blades and double ball bearings with all standard accessories.etc., complete

Supply of 36/40 W Box tipe tube light luminaire powder coated CRCA Sheet stell housing with electranic ballast chokes and all standard accessories etc., complete asper standard specifications

Providing and placing on terrace (at all floor levels) polyetheylene water storage tank with double layer approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet and outlets and over flow pipes but without fittings and base support for tanks including cost and conveyance of all materials and labour charges etc.,complete

Supply and fixing of Pedastal for wash hand basin etc., complete asper standard specifications

Cost of Labour charges of Pedastal for wash hand basin etc., complete asper standard specifications

Earth Work excavation and depositing on bank with an initial lead of 10 m and 2 m lift in loamy clayey soils including all labour charges.

Cement Concrete ( 1:2:4) using 20 mm HBG crushed metal including cost and conveyance of all materials and all labour charges etc complete.

Providing , laying, testing Commissioning of following classes MS pipesconforming to IS 3589 and 1239 including fittings like elbows, tees,flanges, tapers, nuts, bolts, gaskets etc., complete. Makes : As per list of recommended brands. For 250mm dia MS pipe

Providing Ornamental Grill including Structural Steel and Welding charges including cost and conveyence of all materials and labour charges etc., complete

Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves PN 1.6 (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 including all taxes, duties , complete and lowering, laying and fixing the valve in the pipeline including necessary specials, jointing materials, etc., including construction of RCC valve chamber of departmental approved size as per the design and drawings, etc.complete for finished item of work as per the standard specifications and as directed by the department Engineers. The rates are inclusive of cost and conveyance of all materials and labour charges and all taxes, duties and levies for finished item of work, but excluding GST for Pumping mains. 80 mm dia Sluice valves on 80 mm dia DI Pipeline