BID DOCUMENTS FOR PROVIDING, SUPPLYING & ERECTING OF 12.0 METER HIGH MAST POLE WITH LED LIGHT AT VARIOUS LOCATIONS OF BORIAVI NAGARPALIKA UNDER: SWARNIM JAYANTI MUKHYA MANTRI SAHERI VIKAS YOJANA (UDP-88) YEAR: 2025-26.

Total Amount Rs.

Note : 4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-

10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where

there is a change as per actual mix design the cost of difference of cement consumption have been deducted

from the rate of original item at the rate of input rate mentioned in all the tender.

Signature of Contractor Chief Officer

Boriavi Nagarpalika

SECTION-7 BILL OF QUANTITIES-167

BORIAVI MUNICIPALITY, BORIAVI

ESTIMATE FOR 12.0 METER HIGH MAST POLE WITH LED FLOOD LIGHT INCLUDING NECESSARY FOUNDATION,

CABLES, WIRES, FITTINGS AND FIXTURES NEAR MANGAL PARK ROAD AT BORIAVI

Sr. Quantity Discription Total Unit Amount

1 Supplying & erecting XLPE(IS:7098)(I)-88 ISI unarmoured

copper cable 1.1 KV grade to be erected as directed of following

45.00 (E) 3 core 2.5 Sq. mm 136.35 Mtr.

2 3.00 Approved make Four pole moulded case circuit breaker having

No. breaking capacity ICU of 25 K.A. at 415 V,having normal current

rating up to 25 A to 100A. with Fixed thermal & magnetic release

suitable to work on A.C. supply 50 cys. with all internal

connections & complete erected in16 G.M.S. housing on angle

frame. Cat.II 4824.77 Ea.

3 Miniature circuit breaker single pole 6A to 32A suitable to

operate on 240 V A.C. system and having breaking capacity

K.A. to be erected in existing box. Confirming to IS 8828/1996

6.00 Cat.II 91.91 Ea.

4 6.00 Providing and erecting Annealed bare Copper wire 8 to

Kgs. S.W.G. 794.87 Kg.

5 Supplying & erecting earth pit of minimum bore dia.150mm size

approved make Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of corrosion free hot

dipped G.I.Pipes having Outer pipe dia of 50mm having 80-200

Micron galvanising, Inner pipe dia of 25 mm having 200-250

Micron galvanising, connection terminal dia of 12mm with

constant ohmic value surrounded by highly conductive

compound with high charge dissipation suitable for following

type of applications with chamber and heavy duty cover.

(A)(approved make OEM has to submit test certificate including

value of earth resistance of installation duly stamped and signed

by agency and officer Incharge has to ensure the value of

earthing resistane mentioned in test Certificate) & having back

filling compound of (B) Inner chemical (CCM Compound)-

Resistivity:- 0.2 ohm / meter testing as per IEC 62561-2017,

Voltage drop:- < 1 volt at no load & dry form, Sulphar content:-

<2%(C) Back fill Compound :- Earthing compound should be

capable to retain moisture for long time Necessary test report

must be submitted by Agency.

SBD SECTION-7 BILL OF QUANTITIES-168

6.00 (b)For Electrical installation up to 11 KV in normal soil. Length of

No. Pipe : 2.00 mtrs Back filling Compound :1 no. Bag of 25 Kg.

6 Providing and erecting XLPE (IS:7098)(I)-88 ISI marked

armoured cable multistrand Aluminium conductor for 1.1 KV. to

be laid on wall with necessary clamps or in existing cable trench

/ pipe at road crossing or floor of following size of cables.

150.00 (c) 4 Core 10 sq. mm 138.37 Mtr.

7 150.00 Providing & laying approved make Double Walled Corugated

Mtr. pipe (DWC) of polythylene (Confirming to IS-14930-II) with

necessary connecting accessories of same materials at required

depth for laying of cable. Below ground / road surface for

enclosing cable and back filling the same to make ground as per

original. (A) 50 mm Dia

8 Supplying following size of Light duty “A” Class G.I. Pipe &

erecting as directed by Engineer-in-charge.

9 Providing and, fixing heavy duty flange type brass cable gland

with rubber ring for PVC insulated armoured cable complete with

out going tails, insulating tape etc for following size of cables.

15.00 (C) 2 to 4 core 10 Sq. mm 38.38 Ea.

10 3.00 Supplying, erecting, testing, commissioning approved make

No. M.S. Polygonal High Mast Pole having following general

Specification. (a) Polygonal Section fabricated from M.S. Plate

confirms BSEN 10025 & Hot deep galvanized minimum 65/86

micron (as per IS 2629 /1985) Lantern carriage with ring and

rubber lines for erection of luminaries of suitable site. (b)

Maximum telescopic section not more than four (c) Double drum

gear pipe motorized winch with 6mm dia S.S. Rod (For 16 mtr

and above size) (d) Approved make L.E.D. aviation light = 1 No.

Lightening arrestor = 1 No. with necessary wiring of 2.5 sq.mm

core ISI copper cable Unarmoured. (e) Bottom most section

suitable for mounting reversible motor and switchgears having

door not more than 1400mm x 300mm with waterproof gasket &

hinges & locking arrangement. (f) Pole structure comprises

suitable size of reversible motor, cable and necessary

switchgears with control panel. (g) bottom section shall have

suitable size of thickness supports ribs foundation bolts nuts etc.

(h) Item not comprises the cost of lanterns. (i) Necessary

Cement Concrete foundation as per IS including testing &

SBD SECTION-7 BILL OF QUANTITIES-169

commissioning of the entire structure for following size of High

[1] High Mast 12 Mtr. TOP A/F 105 mm, BOTTOM A/F 360mm,

No. of Sec. No. - 1, Bottom Thickness - 3 mm, Size of Base

Plate - Dia 520 mm x 20 mm thick, Foundation Bolt Size M24 x

850 mm, Qty - 6 Nos., Suitable for mounting Fitting of Light -

11 Supplying & erecting Sintex or approved make SMC press

moulded composite FRP loop-in, loop-out box aprox. 2mm thick

complete with bakelite connector strip 4way & hinged doors

having locking arrangements with mounting clamp with nuts,

bolts & washers suitable for erection on pole with cable clamps

& earth bolt of following size of box.

6.00 (a) 300mmx200mmx100mm (deep) 898.90 Ea.

12 Supplying and erecting LED street light / Flood light fittings with

High power White LEDs wattage of 3 Watt and above

assembled on single MCPCB, efficiency more than 130 lm/w

and corrosion free High pressure die cast aluminum housing

with smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/ lenses, with

toughened glass with company mark/name engraved or

embossed 160 to 270 V,Power Factor more than 0.95, THD <

10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire

efficacy> 100 lumens/watt . LED driver efficiency > 85 %.

(fittings required LM-79 & LM-80 certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity

between the ranges shown.)

(B) Flood Light (IP-65), Surge protection -4KV integral and

,Light must have 440VAC line supply with over-voltage

18.00 (vi) above 160 to 200 watts Cat.-III 9647.52 Ea.

13 120.00 Making trench in Hard Murrum/Tar Road of suitable width of

Mtr. cms or required depth for laying any size of cable or locatingthe

fault all over the run and back filling the same and making the

surface as normal ground.

Add :- 18% of GST, Rs.

Add :- 2% of Contingency Charges, Rs.

Add :- 1% of Qaulity Controll, Rs.

SBD SECTION-7 BILL OF QUANTITIES-170

BORIAVI MUNICIPALITY, BORIAVI

ESTIMATE FOR 12.0 METER HIGH MAST POLE WITH LED FLOOD LIGHT INCLUDING NECESSARY FOUNDATION, CABLES,

WIRES, FITTINGS AND FIXTURES AT VARIOUS LOCATIONS OF BORIAVI

Sr. Quantity Discription Total Unit Amount

1 Supplying & erecting XLPE(IS:7098)(I)-88 ISI unarmoured copper

cable 1.1 KV grade to be erected as directed of following size.

45.00 (E) 3 core 2.5 Sq. mm 136.35 Mtr.

2 3.00 Approved make Four pole moulded case circuit breaker having

No. breaking capacity ICU of 25 K.A. at 415 V,having normal current

rating up to 25 A to 100A. with Fixed thermal & magnetic release

suitable to work on A.C. supply 50 cys. with all internal

connections & complete erected in16 G.M.S. housing on angle

frame. Cat.II 4824.77 Ea.

3 Miniature circuit breaker single pole 6A to 32A suitable to operate

on 240 V A.C. system and having breaking capacity 10 K.A. to be

erected in existing box. Confirming to IS 8828/1996 with ISI Mark.

6.00 Cat.II 91.91 Ea.

4 6.00 Providing and erecting Annealed bare Copper wire 8 to 16 S.W.G.

Kgs. 794.87 Kg.

5 Supplying & erecting earth pit of minimum bore dia.150mm size

approved make Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of corrosion free hot

dipped G.I.Pipes having Outer pipe dia of 50mm having 80-200

Micron galvanising, Inner pipe dia of 25 mm having 200-250

Micron galvanising, connection terminal dia of 12mm with constant

ohmic value surrounded by highly conductive compound with high

charge dissipation suitable for following type of applications with

chamber and heavy duty cover. (A)(approved make OEM has to

submit test certificate including value of earth resistance of

installation duly stamped and signed by agency and officer

Incharge has to ensure the value of earthing resistane mentioned

in test Certificate) & having back filling compound of (B) Inner

chemical (CCM Compound)- Resistivity:- 0.2 ohm / meter testing

as per IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry

form, Sulphar content:- <2%(C) Back fill Compound :- Earthing

compound should be capable to retain moisture for long time

Necessary test report must be submitted by Agency.

6.00 (b)For Electrical installation up to 11 KV in normal soil. Length of

No. Pipe : 2.00 mtrs Back filling Compound :1 no. Bag of 25 Kg.

SBD SECTION-7 BILL OF QUANTITIES-171

6 Providing and erecting XLPE (IS:7098)(I)-88 ISI marked armoured

cable multistrand Aluminium conductor for 1.1 KV. to be laid on

wall with necessary clamps or in existing cable trench / pipe at

road crossing or floor of following size of cables.

150.00 (c) 4 Core 10 sq. mm 138.37 Mtr.

7 150.00 Providing & laying approved make Double Walled Corugated pipe

Mtr. (DWC) of polythylene (Confirming to IS-14930-II) with necessary

connecting accessories of same materials at required depth for

laying of cable. Below ground / road surface for enclosing cable

and back filling the same to make ground as per original. (A)

mm Dia 62.62 Mtr.

8 Supplying following size of Light duty “A” Class G.I. Pipe &

erecting as directed by Engineer-in-charge.

9 Providing and, fixing heavy duty flange type brass cable gland with

rubber ring for PVC insulated armoured cable complete with out

going tails, insulating tape etc for following size of cables.

15.00 (C) 2 to 4 core 10 Sq. mm 38.38 Ea.

10 3.00 Supplying, erecting, testing, commissioning approved make M.S.

No. Polygonal High Mast Pole having following general Specification.

(a) Polygonal Section fabricated from M.S. Plate confirms BSEN

10025 & Hot deep galvanized minimum 65/86 micron (as per IS

2629 /1985) Lantern carriage with ring and rubber lines for

erection of luminaries of suitable site. (b) Maximum telescopic

section not more than four (c) Double drum gear pipe motorized

winch with 6mm dia S.S. Rod (For 16 mtr and above size) (d)

Approved make L.E.D. aviation light = 1 No. Lightening arrestor =

1 No. with necessary wiring of 2.5 sq.mm 5 core ISI copper cable

Unarmoured. (e) Bottom most section suitable for mounting

reversible motor and switchgears having door not more than

1400mm x 300mm with waterproof gasket & hinges & locking

arrangement. (f) Pole structure comprises suitable size of

reversible motor, cable and necessary switchgears with control

panel. (g) bottom section shall have suitable size of thickness

supports ribs foundation bolts nuts etc. (h) Item not comprises the

cost of lanterns. (i) Necessary Cement Concrete foundation as per

IS including testing & commissioning of the entire structure for

following size of High Mast poles.

[1] High Mast 12 Mtr. TOP A/F 105 mm, BOTTOM A/F 360mm,

No. of Sec. No. - 1, Bottom Thickness - 3 mm, Size of Base Plate -

Dia 520 mm x 20 mm thick, Foundation Bolt Size M24 x 850 mm,

Qty - 6 Nos., Suitable for mounting Fitting of Light - 6 Nos.

SBD SECTION-7 BILL OF QUANTITIES-172

11 Supplying & erecting Sintex or approved make SMC press

moulded composite FRP loop-in, loop-out box aprox. 2mm thick

complete with bakelite connector strip 4way & hinged doors having

locking arrangements with mounting clamp with nuts, bolts &

washers suitable for erection on pole with cable clamps & earth

bolt of following size of box.

6.00 (a) 300mmx200mmx100mm (deep) 898.90 Ea.

12 Supplying and erecting LED street light / Flood light fittings with

High power White LEDs wattage of 3 Watt and above assembled

on single MCPCB, efficiency more than 130 lm/w and corrosion

free High pressure die cast aluminum housing with smooth finish

powder coated and heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened glass with company

mark/name engraved or embossed 160 to 270 V,Power Factor

more than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity

ratio >0.45, Luminaire efficacy> 100 lumens/watt . LED driver

efficiency > 85 %. (fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown ranges of

Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.)

(B) Flood Light (IP-65), Surge protection -4KV integral and ,Light

must have 440VAC line supply with over-voltage protection.

18.00 (vi) above 160 to 200 watts Cat.-III 9647.52 Ea.

13 120.00 Making trench in Hard Murrum/Tar Road of suitable width of

Mtr. cms or required depth for laying any size of cable or locatingthe

fault all over the run and back filling the same and making the

surface as normal ground. 62.62 Mtr.

Add :- 18% of GST, Rs.

Add :- 2% of Contingency Charges, Rs.

Add :- 1% of Qaulity Controll, Rs.

SBD SECTION-7 BILL OF QUANTITIES-173