Additional civil work at 1x6.3 MVA 33KV/11Kv Receiving Station at Migrant colony Odina under UT Capex Budget

Earthwork in excavation over areas (exceeding 30 cms in depth, 1.5m in width as well as 10 Sqm on plan) incld. disposal of excavated earth, and lift upto 1.5m, (All kinds of soil). By mechanical means

Providing & laying of stone soling in level.

Providing & laying in position cement conc. of specified grade excld. Cost of centering & shuttering- all work upto plinth level in 1:4:8 (1 cement :4 coarse sand :8 graded stone agg. 40 mm nominal size (Crushed)

Providing & laying in position cement conc. of specified grade excld. Cost of centering & shuttering- all work upto plinth level in 1:2:4 (1 cement :2 coarse sand :4 graded stone agg. 40 mm nominal size (Crushed) M-15 Grade PCC

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 5.3.1 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforcement for RCC work incld. straightening, cutting, bending, placing in positions and binding all complete (T.M.T).

Centering & shuttering incld. strutting, propping etc. & removal of form for: walls( of any thickness), plinths and butresses-

Centring & Shuttering for lintels, suspended floors, columns etc.

Centring & Shuttering for Edges of Slab

Brick work with F.P.S. bricks of class A in foundation and plinth in cement mortar 1:6 (1 cement : 6 coarse sand).

Extra for Brick work above plinth

Providing wood work in frames of doors, windows, clerestory windows and other frames wrought framed and fixed in position:-First class deodar wood.

Providing and fixing of glazed shutters for doors, windows and clerestory windows using 10 kg/Sqm (4 mm thick) glass panes including black enameled ISI marked M.S butt hinges with necessary screws. 40mm thick (Ist class Kail Wood)

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.including ISI marked black enameled M.S.Butt hinges with necessary screws including cost of paneling 25mm to 40 mm thick :-Ist class kail wood.

P/F 40 mm thick wire gauze shutters using glavansoned M.S. wire gauze of average width for aperture 1.4mm with wire of dia. 0.63 mm for doors, windows and clerestory windows including ISI marked bright finished or/ and black enameled M.S.Butt hinges with necessary screws:- First class kail wood.

P/F of Ceramic glazed floor tiles (thickness to be specified by the manufactures) of Ist quality conforming of IS:13755 of NITCO, ORIENT, SOMANY KAJARIA, or equivalent make in colour such as White, Ivory, Gray, Fume Red brown laid on 20 mm thick bed of cement Mortor 1:4 (1 cemnt:4 coarse sand) including pointing the joints with White cement and matching pigment etc complete.

Providing and laying vitrified floor tiles/Stair steps Columns etc. in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. Size of tile 600x600 mm

Providing and laying of Chequerred precast cement concrete tiles 22mm thick in footpath and courtyard, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing, cleaning and curing complete, on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand)

12 mm thick cement on the rough side of single or half brick wall of mix:1:6 (1: cement :6 fine sand)

Providing and applying Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complet

Providing 75mm wide Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete (Cornice Work)

Cement conc. flooring 1:2:4 mix finished with a floating coat of neat cement incld. cement slurry, but excl. the cost of noising of steps etc. complete, 50 mm thick with 20 mm nominal size, stone agg. (Crushed)

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade with one coat of primer and Two or more coats of paint on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture.

Providing and fixing water closet indian type including cistern, P or S trap including cutting and making good the wall and floor, white colour (viterous ,cera , etc) orrisa pattern with integral foot rests

Providing and fixing wash basin with C.I/M.S brackets 15mm C.P brass pillar taps 32mm C.P brass waste of standard pattern including painting of fittings and brackets, cutting and making good the walls where ever required. White Vitreous China Wash Basin size 630mmx450mm with a pair of C.P brass pillar taps

Providing and fixing approved colour viterous china pedestal for wash basin cpmpletely recessed at the back for the reception of pipes and fittings.

Providing and fixing stainless steel grating on waste water pipe fitted on suitable frame including all carriages upto site of work complete job.

Providing and fixing PVC waste pipes flexible type for sink and washbasin including PVC fittings complete flexible

Providing and fixing PVC flexible type soil waste and vent pipes for disposal system from bath & kitchen upto Septic tank & Soakage pit with all accessories like bends tees, collars door bends manhole covers etc.complete Job

Construction of brick masonry manhole in cement mortar 1:4(1 cement : 4coarse sand) RCC top slab with 1:2:4 foundation concrete 1:4:8 inside plastering 12mm thick in cement mortar 1:3 Mix incl. cost of manhole covers etc. Size of manhole 90x80x 45 cm inside

Providing and fixing Polyethylene- Aluminum- Polyethylene (PE-ALPE) Composite Pressure Pipes conforming to IS: 15450, U.V. stabilized with carbon black having thermal stability for hot and cold water supply, capable to withstand temperature upto 80ºC, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. Elbows, tees, reducers, couplers and connectors etc. This includes testing of joints complete as per direction of the Engineer-in-charge:Internal work concealed with clamps at 1.00 meter spacing including cutting the chases and making good the wall etc. 32 mm dia

Providing and fixing Polyethylene- Aluminum- Polyethylene (PE-ALPE) Composite Pressure Pipes conforming to IS: 15450, U.V. stabilizedwith carbon black having thermal stability for hot and cold water supply, capable to withstand temperature upto 80ºC, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. Elbows, tees, reducers, couplers and connectors etc. This includes testing of joints complete as per direction of the Engineer-in-charge External work including trenching and refilling etc. complete ...25mm dia

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board 510x1040mm bowl depth 250mm

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

Providing and fixing pipe specials 15mm dia reputed make (RESP, Jaquar, Parco, NIKE,etc ) ISI mark including all carriages upto site of work complete job.

CP bib cock

CP bib cock long nose

CP angle valve

gate/ball /stop valve

Wall Mixer

Sink Mixer

Providing and fixing toilet paper holder CP brass

Providing and fixing towel rail CP brass

Providing and fixing soap case CP brass

Providing and fixing water heater reputed make (venus, racold, etc) ISI mark including all necessary firrings including making good wall after installation all complete

Dry random rubble masonry with hard stone in foundation and plinth

Structural steel work in built up sections, trusses and framed work , in cable trench, cheqquerred plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded

Structural steel work in single section fixed with connecting plate for truss work including cutting, hoisting, fixing in position and applying a priming coat of red oxide steel primer

Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required

Providing & Fixing of electric wiring of standard gauge in concealed HDPE conduits and fittings/heating/lighting points of standard make like Polycab/Philips/Havels /Bajaj/Legrand/ Anchor (Complete job in all respects) with 10 No lighting points, 5 No heating points,three No Fans and 3 exhaust fan etc. as per directions of Engineer-In-Charge with cost of all materials

Supply & Fixing of 300 mm in width Eavea Boarding of 0.50 mm thick coloured GI Sheets incl. cost of J or L hooks or 8mm nuts & bolts

Providing PGI sheet coloured for ridges,hips and valleys fixed with polymer coated J or L hooks, bolts and nuts 8mm dia meter with bitumen & G.I limplet washers complete (0.50mm thick) 600mm wide

Providing & Fixing Stainless Steel Fittings for doors & Windows comprising of handles,tower bolts,stays, hinges,aldrops with locks etc of reputed brand. complete job

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m

Providing & Fixing of electric wiring of standard gauge in concealed HDPE conduits and fittings/heating/lighting points of standard make like Polycab/Philips/Havels /Bajaj/Legrand/ Anchor (Complete job in all respects) with 30 No lighting points, 15 No heating points,three No Fan points etc. as per directions of Engineer-In-Charge with cost of all materials

Pre-laminated particle board with decorative lamination on both sides, Grade I, Type II IS : 12823 marked 9.8.11 MDF board 12 mm thick

Providing & Fixing modular wardrobes of 19mm plyboard of various sizes as per Engineer in charge including fitting, finishing, fixtures etc.including providing and fixing sunmica. Complete Job

Providing & laying of 25mm or more thickeness granite sheets of desired length for kitchen counters including its flooring, skirting, grinding and required cuts as desired by the incharge engineer.

Providing edge moulding to 18 mm/16 mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite Work

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. 5.0 mm thick glass pane (weighing not less than 12.50 kg/sqm)

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge,

Renovating lawns including weeding, cheeling the grass, forking the ground, top dressing with sludge or manure mixing the same with forked soil, watering and maintaining the lawn for 30 days or more till the grass forms a thick lawn free from weeds & fit for mowing & disposal of rubbish as directed, including supplying good earth if needed but excluding the cost of sludge or manure (the good earth shall be paid separately.)

Carriage of all materials required for construction from source upto site of work by mechanical transport

Sand Av. Lead 10 Km

Stone Aggregate Av. Lead 20 Km

Bricks Av. lead 30 Km

Stones Av.lead 20 Km

Cement , wood, CGI sheets & Steel etc. Av. Lead 6 Kms

sardar hussain khan (BID ID -2356154)

SOFI MUBASHER HUSSAIN (BID ID -2356945)

MUSHTAQ AHMAD MIR (BID ID -2356768)