SOP TO KIIFB Ramanchadi- Aligarh DWSS in f/o KWA to the tune of 1250 KVA at Electrical Section Pulamanthol (Retender)

Materials (ABC 3x120+1x95 sqmm cable and Accessories)

Aerial Bunched Cable HT 3x120 + 1x95 sq.mm (Insulated Messenger)

Cable Tie UV Plastic Heavy Duty 300 mm Length

Stainless Steel Buckle Slot width 10.5 mm x 1.5 mm,Thickness 1.2 mm.

Stainless Steel Strap 10 mm x 0.7 mm-For clamping earth wire

Stainless Steel Strap [20 mm x 0.7 mm]

Stainless steel Buckles [20.5 mm x 1.5 mm; thickness 1.2 mm]

Suspension Clamp Assembly for HT AB Cables up to 120 sq.mm

End Termination Kit HT ABC 3c x 120 Sq mm

MVT Kit for HT ABC (1 No.)

Anchoring /Dead end Clamp Assembly for HT AB Cables up to 120 sq.mm

Description of Work / Item(s)

Labour for constructing OH line using ABCable

Stringing of 11 kV Aerial bunched cable of size 3 x 120 + 1 x 95 sqmm with bare/insulated Messenger through existing poles

Providing Cable Tie

Conveyance of one km 11kV line materials from section store/stacking place to the work site (excluding poles).

Fitting one set (3No.) 11kV LA and giving connections excluding earthing.

Providing one Coil Earth using GI earth wire, digging separate pit at standard distance away from the pole/structure & backfilling.

Erection of suspension clamp for 11KV ABC of any size

Providing WP support with PSC pole incl. digging & back filling pit.

Transferring LT 3ph 4/5 wire OH line to newly erected HT/LT pole and refitting all items to the new pole.

Dismantling and reconnecting Sph service connection from the OH line incl. lowering down the WP portion.

Stringing one km LT 3ph 4 wire line (Rabbit for Ph, Weasel for N) incl. fitting cross arm etc. removing touchings and conveyance of materials.

Additional rate for excavation of Pit for A type pole in Laterite.

Dismantling one Channel cross arm from existing DP structure, and bringing back to section store.

Loading HT A type pole from the stacking place and unloading the same at work site (transport by vehicle).

Fitting one No. Section fuse on LT line with dropping cables, crimping sockets, connecting with bolt&nut etc.

Dismantling one ordinary street light/CFL/LED fitting from existing pole and refitting the same on newly erected pole and reconnecting.

Dismantling (without damage) one km LT 3ph 4 wire OH line, cross arms, insulators and stacking the conductors in rolls.

Dismantling one damaged LT PSC/RCC Strut pole incl. removal of clamps and stacking.

Dismantling (without damage) one km 11kV line (3 conductors), cross arm, insulators, disc, rolling the conductor and stacking.

Dismantling one damaged LT PSC/RCC pole after disconnecting stays, strut etc. and stacking the same.

Fitting one LT 2 line cross arm on HT or LT existing poles incl. fitting insulators and binding the same with LT Line.

Loading LT PSC pole from the stacking place and unloading the same at work site (transport by vehicle).

Dismantling (without damage) one LT PSC/RCC pole after disconnecting stays, strut etc. and stacking the same.

Fitting and erecting one HT A type Pole in position incl. fitting cross arm, digging & back filling pit, drawing earth leads.

Fitting and erecting one HT PSC Pole in position incl. fitting cross arm, digging & back filling pit, drawing earth leads.

Additional rate for excavation of one Pit for HT Pole/HT Stay in Hard Laterite.

Additional rate for excavation of one Pit for HT Pole/HT Stay in Soft Rock.

Fabricating Mini lattice structure using 2 Nos. of A poles

Dismantling one V cross arm/Channel cross arm from existing Pole, and bringing back to section store.

Additional rate for excavation of Pit for A type pole in Rock.

Additional rate for excavation of Pit for A type pole in Hard Laterite.

Dismantling one damaged 11kV TW/RSJ/Rail pole after disconnecting stays, strut etc. and stacking the same.

Transporting poles by hired vehicle to a distance beyond 5km and carrying upto 4 poles. (Running km).

Dismantling one damaged 11kV PSC/RCC pole after disconnecting stays, strut etc. and stacking the same.

Dismantling (without damage) one 11kV A type pole after disconnecting stays, strut etc. and stacking the same.

Dismantling one damaged 11kV A type pole after disconnecting stays, strut etc. and stacking the same.

Dismantling one damaged HT TW/RSJ/Rail Strut pole incl. removal of clamps and stacking.

Transporting poles by hired vehicle to a distance upto 5km and carrying upto 4 poles excluding loading & unloading.

Dismantling (without damage) one HT PSC/RCC Strut pole incl. removal of clamps and stacking.

Additional rate for providing one disc set on any type of HT pole for making cut point.

Dismantling (without damage) one HT stay incl. back filling, and bringing back to section store.

Additional rate for excavation of Pit for A type pole in Soft Rock.

Additional rate for refitting/redoing one Disc set while renewing any type of 11kV cut pole

Fitting and providing one Strut using HT PSC pole incl. digging & back filling pit.

Pole numbering using printed Aluminium sheets / Painting the surface of pole with anti algal yellow paint and painting Letters with black paint as specified incl. cost of paint.

Dismantling (without damage) one LT PSC/RCC Strut pole incl. removal of clamps and stacking.

Dismantling one LT 2 line cross arm from existing pole.

Dismantling one LT 4 line cross arm from existing pole.

Dismantling one section fuse

Additional rate for refitting/redoing one Shackle set and reshackling one span while renewing any type of pole.

Reshackling one span LT Sph 2 wire OH line, replacing insulators, tightening stay, cutting tree branches incl. conveyance.

Reshackling one span LT 3ph 4 wire OH line, replacing insulators, tightening stay, cutting tree branches incl. conveyance.

Dismantling (without damage) LT stay incl. digging pit in all classes of soil and backfilling

Dismantling and reconnecting 3ph service connection from the OH line incl. lowering down the WP portion.

Preparing index register (book & soft copy) showing name of Transformer, post numbers, consumer numbers as specified.

Traffic signal painting of pole 1.5m height using black and white paints in alternate rings of 25cm width incl. cost of paint as specified.

Dismantling (without damage) one 11kV PSC/RCC pole after disconnecting stays, strut etc. and stacking the same.

Dismantling one damaged HT PSC/RCC Strut pole incl. removal of clamps and stacking.

Fitting one Additional 75x40mm, 1.8m Channel cross arm in existing single pole incl. conveyance of materials.

Fitting one LT 4 line cross arm on HT or LT existing poles incl. fitting insulators and binding the same with LT Line.

Fitting one Additional V cross arm in existing single pole incl. conveyance of materials.

Drilling hole of various sizes on existing Channel/Cross Arm.

Fitting and providing one Strut using A type pole incl. digging & back filling pit.

Providing concrete muffing (0.45x0.45x1.5m) inclusive of cost of all material (as per specification).

Stringing of one km 11kV line with ACSR Raccoon (3 conductors) incl. cutting and removing tree branches wherever necessary.

Transporting A type pole by Head load (limited to 0.3km).

Loading HT PSC pole from the stacking place and unloading the same at work site (transport by vehicle).

Fitting and providing one HT Stay for 11kV pole incl. digging & back filling pit.

Fitting and providing one HT Fly stay for 11kV pole using A type pole incl. digging & back filling pits.

Additional rate for excavation of one Pit for HT Pole/HT Stay in Rock.

Additional rate for excavation of one Pit for HT Pole/HT Stay in Laterite.

Fitting and providing one HT Fly stay for 11kV pole using HT PSC pole incl. digging & back filling pits.

Fitting one Additional 2.4m Channel cross arm in existing single pole incl. conveyance of materials.

Drilling oval shaped hole of various sizes on existing Channel/Cross Arm/GI/MS cleat etc.

Fitting one set AB switch and giving connection

Fitting one Additional 2.4m/3m Channel cross arm (100x50x6mm), in existing 11kV DP incl. conveyance of materials.

Cutting Channel/Cross Arm/Angle Iron into two pieces.

Fitting and erecting one HT DP using A type pole in position incl. fitting 2 channel cross arms, digging & back filling pit, drawing earth leads.

Dismantling (without damage) one AB switch from existing structure and bringing back to section store.

Fiting One no MVT on existing cross arm including 2 nos end termination (for One phase) of any rating for 11 kV AB Cable

Fiting One no MVT on existing cross arm excluding termination work (for One phase) of any rating for 11 kV AB Cable

Erection of Anchor clamp / dead end clamp for 11kV ABC of any size

Providing one Earth using earth pipe incl. digging & backfilling pit and supply of charcoal, salt, sand etc.

Description of Work / Item(s)

Amount

TOTAL BOQ1 (Materials( Total Ex-work price of Materials + Total Transportation cost ) excluding GST.)

TOTAL BOQ2 (Installation / Erection Charges (Excluding GST)

TOTAL AMOUNT [1+2] (Excluding GST)

Discount offerred by Bidder(If any)

BOQ 3: TOTAL excluding GST [3 - 4]

Grand Total including GST (5+ GST Amount of BOQ1+GST Amount of BOQ2 )

Fathima Engineering Co. Pvt. Ltd. (BID ID -1958273)

Fathima Engineering Co. Pvt. Ltd. (BID ID -1958273)

Fathima Engineering Co. Pvt. Ltd. (BID ID -1958273)