REPAIR/MAINT OF INTERNAL ELECTRIFICATION, SUBMAIN WIRING, ALL TYPES OF FANS AND WINTER APPLIANCES IN MH AREA, 12 CDU, ECHS, CE OFFICE AND ADJOINING AREA UNDER GE (A) NO 2 JODHPUR

Amount

Taking down carefully aluminium/copper point wiring complete for light, fan, socket or power point etc with fittings fixtures such as ceiling rose, holders, electric fittings, switchs, sockets, aluminium conductor cable with and incl wooden batten or FR PVC conduit and its accessories such as wooden gutties, rawl plugs, GI screws, aluminium clips, nails etc complete and removing the material from site and making good the disturbed surface of wall / floor/ ceiling etc as original i.e. brick work, plastering, white washing, OBD etc as required, complete all as specified and directed by Engineer-in-charge.

M&L for point wiring (Concealed modular) complete for one light point / fan point / exhaust fan point / bell point controlled by one 1-way switch / bell push, with 1.5 Sq mm (nominal area) FRLS PVC insulated un-sheathed and stranded copper conductor cable ISI marked and PVC concealed conduit ISI marked of size 20 mm dia medium grade and PVC conduit fittings such as tees, bends, elbow, reducers with and including FRLS PVC insulated unsheathed 1.5 Sqmm copper earth wire, connecting to common earth dolly with and incl Metal flush box of suitable size for fixing modular switches / sockets etc and making good surface by wall panelling etc, complete all as directed by engineer-in-charge. Note : 1. The cost of modular type Metal flush boxes and modular accessories like inner/outer cover plates etc is deemed to be included in quoted rate. 2. The cost of cutting chases on wall and making good surface on wall are deemed to be included in the quoted rate

All as per srl item no. 02 here-in-before but for one socket outlet 3 pin, 5 Amps on independent board.

All as per srl item no. 02 here-in-before but for one socket outlet 3 pin, 5 Amps on same board.

All as per srl item no. 02 here-in-before but for one light point controlled by two 2-way switches

All as per srl item no. 02 here-in-before but with 2.5 sq mm FRLS copper wire with 1.5 Sqmm FRLS copper earth wire complete all as specified and directed by Engr-in-Charge

S & F Modular Switch one way 6A , 1 module size complete all as directed.

S & F Modular Switch two way 6A , 1 module size complete all as directed.

S & F Modular Switch one way 16A , 1 module size complete all as directed.

S & F Modular Bell push way 6A with 2 module size with indicator complete all as directed.

S & F Modular Socket, 6 A ,5 Pin,2 module size complete all as directed.

S & F Modular Socket , 6 A / 16 A , 5 Pin , 2 module size complete all as directed.

S&F of Modular type regulator 2 module A/C 240 Volts Note: Make of Modular switches / sockets and other accessories : Anchor (Woods) / Legrand (Myrius) / Havells.

M&L point wiring (Concealed Normal) complete with single core FRLS PVC insulated, unsheathed, multi stranded copper conductor cables 1.5 Sqmm 1100 volts grade, with and incl 1.5 Sqmm FRLS PVC insulated, unsheathed, multi stranded copper conductor cables as continuous earth wire connected to metallic bodies of luminaries / fans etc at one end and to common earth dolly at other end, complete wiring drawn through & PVC casing and capping of 25 mm and above (as per conductor run ) medium grade, ISI marked, incl all accessories & fittings / junction boxes / inspection covers etc, with and incl concealed MS sunken box of suitable size flush with wall surface, covered with & incl 3 mm thick bakelite, laminated hylem sheet / Gang box for top cover suitable for fixing of piano type switches / sockets etc, complete all as specified and directed for One light / fan / bell / exhaust fan point controlled by one no, 1-way, 5 Amps switch. (Note : The cost of MS sunken box with 3 mm thick bakelite, laminated hylem sheet top cover is deemed to be included in quoted rate.)

All as per item ser No 11 above but for one light point controlled by two nos, 2-way, 5 Amps switch.

All as per item ser No 11 above but for one socket outlet 3 pin, 5 Amps on independent board, controlled by one no 5 Amp switch.

All as per item ser No 11 above but for one socket outlet 3 pin 5 amps on the same board controlled by one no 5 Amp switch.

All as per srl item no. 11 here-in-before but with 2.5 sq mm FRLS copper wire with 1.5 Sqmm FRLS copper earth wire for indpendent 15 Amp point.

M/L Point wiring complete with 1.5 sqmm single core PVC insulated and PVC unsheathed FRLS multistranded copper conductor cable 1100 volt grade enclosed in and including PVC casing and capping with accessories fixed on surface on walls/ceiling by means of PVC sleeves Dash-fastners and cadmium plated screws all as per ISI including sunk type boxes for mounting fitting like switches, socketes fan regulators with 3 mm thick phenlic laminated sheet top covers concealed in walls etc including 1.5 Sqmm single core multi stranded copper conductor PVC insulated and unsheathed cable as earth continuity conductor to common earth dolly complete all as specified and directed for One light / fan / bell / exhaust fan point controlled by one no, 1-way, 5 Amps switch

All as per item ser No 13 above but for one socket outlet 3 pin, 5 Amps on independent board, controlled by one no 5 Amp switch.

All as per item ser No 13 above but for one socket outlet 3 pin 5 amps on the same board controlled by one no 5 Amp switch.

All as per srl item no. 13 here-in-before but with 2.5 sq mm FRLS copper wire with 1.5 Sqmm FRLS copper earth wire for indpendent 15 Amp point.

S&F of Switch piano type, single pole, one way, 5 amps, 230 volts, complete all as specified and directed. Make : SSK / Havells (Reo)/Cona

S&F of Socket, two-in-one, 5 pin, 5 Amp, Universal type, 230 volts, complete all as specified and directed. Make : SSK / Havells (Reo)/Cona

S&F of Switch piano type, single pole, one way, 15 amps, 230 volts, complete all s specified and directed. Make : SSK / Havells (Reo)/Cona

S&F of Socket, 6 pin, 5/15 Amp, multipurpose shutter type, 230 volts, complete all as specified and directed. Make : SSK / Havells (Reo)/Cona

Supply and fixing in repair Electronic type regulator 240 Volts. Make Anchor or equivalent of Cona/SSK/Gold Medal

S&F of Bell push, flush type 5 amps, 230 volts. Make : SSK / Havells (Reo) /Cona

S&F of Electric Call bell ding dong AC 230 volts Single Pole complete all as specied and directed by engineer-in-charge. Make :Cona / Havells / Crompton

S&F of Ceiling rose, two to three terminals, bakelite body, 230 volts, complete all as specified and directed. Make : Havells / SSK /Cona

S&F of Lamp holder, metal cased, bakelite body, 230 volts, complete all as specified and directed. Make : SSK / Havells (Reo)/Cona

S&F of Wall mounting light fitting City 2 and including suitable size 9 W retrofit LED bulb and making necessary electric connection, complete all as specified and directed. Make : Havells City 2 / Philips / Crompton

S&F Aviation obstruction light fitting 110-277 V,5 Watts and making necessary electric connection, complete all as specified and directed. Make : Havells / Philips / Crompton

S&F Wall Mounting light fitting, Decorative type, wall mounting, SS finish fixture with opal glass diffuser suitable and incl suitable size 9W retrofit LED bulb and making necessary electric connection, complete all as specified and directed.Make : Havells / Philips / Crompton / Wipro

S&F in replacement Recessed/Surface LED 1x4 panel ceiling light with high performance 40 watt Make : Crompton Cat part No LCTLRN-40-CDL(1X4) or equivalent make approved by engineer-in-charge.

S&F in replacement of recessed mounted LED light fitting of 600 mm X 600 mm size, suitable for false ceiling,not less than 34/36 Watt, 6500K white light, metal body with white colour outer finish and acrylic diffuser including LED driver / transformer, spring loaded clips for easy mounting and making all electric connections complete all as directed. Make : Havells / Philips / Wipro / CG or equivalent

S&F in replacement of recessed mounted LED light fitting of 600 mm x 600 mm size, suitable for false ceiling,not less than 34/36 Watt, 3000K warm white light, metal body with white colour outer finish and acrylic diffuser including LED driver / transformer, spring loaded clips for easy mounting and making all electric connections complete all as directed. Make : Havells / Philips / Wipro / CG or equivalent

S&F in replacement of Energy efficient Round / square recessed mounted polycarbonate fixture flat panel not less than 12 W LED 6500 K White down lighter with premium white powder coating and die cast aluminium and making necessary electric connection complete all as specified and as directed by Engineer-in-Charge. Make : Havells/Wipro/Crompton/Philips or equivalent

Supply and fixing in replacement of Energy efficient round / square recessed mounted polycarbonate fixture flat panel not less than 12W LED 3000K Warm white down lighter with premium white powder coating and die cast aluminium and making necessary electric connection complete all as specified and as directed by Engineer-in-Charge. Make : Havells/Wipro/Crompton/Philips

Supply and fixing in replacement of Energy efficient round recessed mounted polycarbonate fixture flat panel 6W LED 3000K Warm white down lighter with premium white powder coating and die cast aluminium and making necessary electric connection complete all as specified and as directed by Engineer-in-Charge. Make : Havells/Wipro/Crompton/Philips

Supply and fixing in replacement of Energy efficient round recessed mounted spot light 2 W LED 3000K Warm white down lighter with premium white powder coating and die cast aluminium and making necessary electric connection complete all as specified and as directed by Engineer-in-Charge. Make : Havells/Wipro/Crompton/Philips

Supply and fixing in replacement of Energy efficient round recessed mounted spot light 2 W LED RED/GREEN/BLUE down lighter with premium white powder coating and die cast aluminium and making necessary electric connection complete all as specified and as directed by Engineer-in-Charge. Make : Havells/Wipro/Crompton/Philips

S&F LED strip 22 W Flexion 3000K with suitable driver and making necessary electric connection complete all as specified and as directed by Engineer-in-charge. Make : Havells Cat Part No LHEHCPP5IN1W018/WIPRO/CROMPTON

S&F in replacement of Spike LED COB Garden light not less than 10 W LED, Anthracite colour, made by aluminium and making necessary electric connection complete all as specified and as directed by Engineer-in-Charge. Make : Philips/Wipro/Crompton/Havells

S&F in replacement LED ceiling light driver 24W to 36W, 240V and complete all as specified and directed. Make : Havells /CG / Wipro / C&S

S&F in replacement Plastic ventilating fan 200 mm sweep plastic body including louvers with cutting chases on brick wall and grounting with nut bolts on aluminium frame complete all as specified and directed by engineer-in-charge. Make : Crompton / Havells / Orient / Surya / Bajaj Note : Rates are deemed to be included for cutting chasing on wall or window, grouting with nut bolts etc

All as per item No 40 here in before but 250 mm sweep complete all as specified and directed by engineer-in-charge.

Taking down old unsv recess / surface mounted light fitting and Fixing only with LED surface / recess ceiling light fitting of any wattage, complete with all accessories and making necessary electric connection from ceiling rose to fitting terminal, complete all as specified and directed. Note : LED recess / surface mounted light fitting shall be issued under Sch 'B'

Attending electric complaints for any type of COVID wards at MH area, to check the existing electrical items / points for serviceability of continuous electric supply, rectifying No light complaints including carrying out minor repairs / replacement etc as required to make the item functional and replacement of small pieces of wire, screw, refixing of hanging wires / Light fittings / ceiling fans / exhaust fans, DBs and switch boards etc all as specified and directed by Engr-in-charge. (i) Any other replacement of major items shall be measured & paid separately under respective items of this schedule. (ii) Electrician will ensure to wear complete PP Kit before enter into a COVID ward and use sanitizer regularly. (iii) Contractor will deploy one electrician with helper (keeping necessary electric tools & safety equipments) to attend electric complaints into various COVID wards (Like Family ward, Officers ward, JCOs/OR ward, OT, Lab, etc.,) at MH Jodhpur. (iv) In case Contractor fails to deploy electrician for any complaint, penalty @ Rs. 300/- per complaint shall be recovered from the Contractor.

S&F sheet metal enclosure SPN 240 Volts having two pin and earth plug and socket with one single pole MCB 20 Amps complete all as speciied and directed by engineer-in-charge. Make : Legrand / Havells / ABB.

Taking down carefully Unsv main switch and DB's including MCBs of any size make, type and capacity and depositing at site as directed by engineer-in-charge.

S&F of Vertical Distribution Board, double Door, suitable for 'A' Frame FP MCCB 100 to 125 A made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, VTPN 4 way, 415 volts with bus bar rating 300 Amps, dust and vermin proof, suitable for incorporation of MCB’s and MCCB etc and making all necessary connections, duly flush of wall surface, complete all as specified and directed. Make : Havells Cat Part No DHDLVSRWGOFO04 / Schneider Elect / Legrand / ABB Note : MCCB & MCB will be measured and paid separately under respective items

All as per item No 44 here in before but TPN 4 way (Concealed flush to wall), Distibution Board

S&F of Distribution Board, Double Door, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, SPN 08 way (Concealed flush to wall), 240 volts with bus bar rating 200 Amps, dust and Vermin proof, suitable for incorporation of MCB’s and isolators etc and making all necessary connections, duly flush of wall surface, complete all as specified and directed. Make : Havells / Schneider Elect / Legrand / ABB / Hager

All as per item No 46 here in before but SPN 4 way (Concealed flush to wall), Distibution Board

Taking out old worn out wooden frame / steel frame and supply & Single door sheet metal board complete with flush door handle with locking arrangement painted with powder coated finishing with necessary PCC work complete size 1000x1000x300 Make : BCH Cat Part No BIL 50540 or Equivalent make in Hensel

All as per srl item no. 51 here-in-before but size 800x800x300 Make : BCH Cat Part No BIL 50310 or Equivalent. Make in Hensel

S&F of MCCB, A Frame, thermal adjustable magnectic setting, Ics = 75% 16 kA, 415V, 125 Amp, 4 Pole MCCB with over load and short circuit protection, complete all as directed. Make : Havells Cat part NoIHLASF0125 # / Schneider Elect / Legrand / ABB / Hager

All as per item No 50 here but 100 A, 4 Pole MCCB complete all as specified and directed.

S&F of MCB, C Curve type, 10 kA, 40 to 100 Amps, TPN with over load and short circuit protection, complete all as directed. Make : Schneider Elect / Legrand / ABB / Havells

S&F of MCB, C Curve type, 10 kA, 40 to 63 Amps SPN with over load and short circuit protection, complete all as directed. Make : Schneider Elect / Legrand / ABB / Havells.

S&F of MCB, C Curve type, 10 kA, 6 to 32 Amp, Single Pole over load and short circuit protection, complete all as directed. Make : Schneider Elect / Legrand / ABB / Havells.

Taking down old sub main wiring and M&L for sub main wiring with 2 run of 10 Sqmm FRLS, PVC insulated, unsheathed and stranded copper conductor cable with and incl 10 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable as earth wire connected with thimble from main DB to sub main DB, drawn in to separate casing caping, ISI marked, 20 mm dia size incl all conduit accessories & fittings / junction boxes / inspection covers etc, with and incl cutting chasing and making good of disturbed surface of wall / floor/ ceiling etc as original by brick work, plastering, white washing, OBD etc as required, complete all as directed. Note : Two run of 10 Sq.mm. and one run of 10 Sq.mm (earth wire) cable incuding one run of conduit pipe will be measured as one length including making good the disturbed surfaces. Make of wire : Finolex/Havells/KEI, Make of PVC conduit : Finolex/Modi/Polycab.

All as per srl item no. 58 here-in-before but with 2 run of 6.0 sq mm FRLS copper wire with one run 6 Sqmm FRLS copper cable as earth wire.

All as per srl item no. 58 here-in-before but with 2 run of 4.0 sq mm FRLS copper wire with one run 4 Sqmm FRLS copper cable as earth wire.

M&L for earthing with galvanized steel earth plate electrode of size 600 x 600 x 6 mm buried directly in ground earth pit not less than 2.25 mtr below of normal ground level with top edge of earth plate should not less than 1.5 mtr below normal ground level and connected to galvanized iron earth lead wire of size 4 mm dia by means of bolts, nuts, washers of galvanized iron or steel all as shown in electrical plate No.3 of MES SSR Part I connecting to earthing test point on completion with and including 15 mm bore GI light grade protection pipe (7.5 mtr long) for earth lead GI lead wire 4mm dia (7.5 mtr long), PCC pit with cover in PCC 1:2:4 type B-1 reinforced with 8 mm dia tor bars @ 80mm C/C, 20mm dia medium grade watering pipe with funnel, wire mesh, common salt, charcoal, necessary excavation and earth work, complete all as specified and directed by engineer-in-charge.

M&L preventive maintenance for proper checking of Ceiling fan/exhaust fan/wall mounting fan, Padestal fan etc of any make, type & sweep including checking the serviceabilty, noise, rubber bush, tightning of nut bolts etc of ceiling fan, exhaust fan, wall mounting fan, Padestal fan etc in the presence of MES representative, all as directed by Engr-In-Charge. Note : Any Unsv parts required under this item for replacement shall be measured and paid separately under respective item of Schedule as supply only.

Taking down Ceiling fan/Exhaust fan/Wall mounting fan/Padestal fan etc of any make, type & sweep including checking the serviceabilty of ceiling fan,exhaust fan,wall mounting fan, Padestal fan etc in the presence of MES representative, transporting the same to work shop and refixing the same after replacing of unserviceable parts also applying two coats of spray painting with one coat of approved first quality synthetic enamel paint matching to the existing color including writing the MES No & testing the same complete all as specified and directed by Engr-In-Charge. Note: Any Unsv parts required for replacement shall be measured and paid separately under respective item of Schedule as supply only.

M &L dismantling and removing old burnt copper wire winding of Ceiling fans of any size & sweep of any make and rewinding with new enameled super copper wire of existing gauge as per old copper winding including providing insulation by varnishing (golden), cleaning, oiling, greasing etc complete all as specified and directed by Engr-in-Charge. Note: The super enameled winding wire is to be provided shall be any one make of Devidayal/Usha/Chetak of appropriate gauge as directed by Engr-in-Charge.

All as per Item No 61 as above but for Exhaust fan of any size & sweep of any make complete all as specified and directed by Engr-in-charge.

All as per Item No 61 as above but for Wall mounting fan of size & sweep of any make complete all as specified and directed by Engr-in-charge.

All as per Item No 61 as above but for Padestal fan of size & sweep of any makecomplete all as specified and directed by Engr-in-charge.

Supply only Capacitor of 2.5 - 3.5 Mfd capacity including clip for ceiling fans/exhaust fan/Cabin fan/Table fan of following capacity/ISI marked

Supply only ball bearing suitable for existing ceiling fans upto 1400 mm sweep complete all as specified and directed by Engr-in-Charge :-Make:- SKF/NBC/TATA

Supply only ball bearing suitable for existing exhaust fans upto 300 mm sweep complete all as specified and directed by Engr-in-Charge :-Make:- SKF/NBC/TATA

Supply only down road suitable for existing 1200 mm sweep ceiling fan including fan hook ('U' clamp nuts ,split bolts) made out of MS flat iron and made to shape, nut bolt,hanger clamp rubber, shackle top & canopy set etc complete all as specified and directed by Engineer-in-charge.

Supply only fan blade iron made suitable for existing 1200 mm sweep ceiling fan including necessary accessories etc complete all as specified and directed by Engineer-in-charge.

Supply only fan motor (copper winding ) assembly ,AC single phase,230 V, suitable for existing 1200 mm sweep ceiling fan including capacitor,ball bearing,motor stator,housing etc complete all as specified and directed by Engineer-in-charge.

Supply only exhaust fan blades,frame and louvers all iron made suitable for existing upto 300 mm sweep exhaust fan including necessary accessories etc complete all as specified and directed by Engineer-in-charge.

Supply only exhaust fan motor (copper winding) assembly,AC single phase ,230 V, suitable for existing upto 300 mm sweep exhaust fan including capacitor,ball bearing,motor stator,housing all accessories etc complete all as specified and directed by Engineer-in-charge.

Taking down old unserviceable PVC exhaust fan motor upto 250 mm sweep and supply and fixing PVC exhaust fan motor upto 250 mm sweep complete all as specified and directed by Engineer-in-charge. Make:- Usha/Havells/Crompton or suitable for existing make.

Taking down and refixing Storage type water heater (Geyser ) from wall by disconnecting the electric connection and water inlet/outlet connection from main and repairing the water heater storage type capacity 25/35 ltrs of any type and make, Checking the serviceability of all parts such as inner vesser, rubber gasket, non return valve, heating element, thermostat etc and refixing the same after replacing of Unsv parts and assembly complete (considered as one unit) and installing & testing the same as per the direction of Engineer-in-charge. Note : All unsv parts if reqd to be replaced shall be measured and paid separately under respective item of Sch 'A' as supply only.

Supply only heating element including rubber ring, washer, holding clamps and nuts of geyser upto 3.0 KW/25 to 35 litre capacity of suitable size complete all as specified & directed by engineer-in-charge. Make : Bajaj/Recold/Venus or exisiting make

Supply only thermostat suitable for upto 3.0 KW geyser 25/35 litre capacity complete all as specified & directed by engineer-in-charge. Make : Bajaj/Recold/Venus or existing make .

S&F in replacement electric water storage geyser 2 KW capacity assembly/body 25 litre other than heating element & thermostat including all electrical components parts complete all as specified & directed by engineer-in-charge.Make : Bajaj/Recold/Venus or existing make .

Supply only PVC connection (heavy duty) of 15 mm dia with required length with 2 Nos of brass, chromium plated nuts of approved make & quality complete all as specified & directed by engineer-in-charge.

M&L for repair & maint and making serviceable to UPS of 2 KVA for backup of Shadowless LED OT light fitting complete all as specified and directed by engineer-in-charge . Make : Suitable existing make

M&L for repair & maint and making serviceable to UPS of 10 KVA for backup of Shadowless LED OT light fitting complete all as specified and directed by engineer-in-charge. Make : Suitable existing make or equivalent.

S&F of PCB of UPS 2 KVA for backup of Shadowless Halogen Lamp, complete all as specified and directed, Make : Suitable existing make

S&F of PCB of UPS 10 KVA for backup of Shadowless Halogen Lamp, complete all as specified and directed, Make : Suitable existing make

Supply only Sealed Maintenance free batteries 12 V, upto 30 AH capapcity for 10 KVA UPS . Make : Amaron / Exide / Okaya or existing equivalent make.

Supply only Sealed Maintenance free batteries 12 V, upto 10 AH for 2 KVA UPS. Make : Amaron / Exide / Okaya or exisitng equivalent make.

Taking down and disconnecting the electric connection of UPS capacity upto 10 KVA from main supply and repairing the UPS, Checking the serviceability of all parts such as driver card, charging card, transformer & all electronic boards etc including batteries and refixing the same after replacing of unserviceable parts and assemblying complete (considered as one unit) and installing and testing the same as per the direction of Engineer-in-charge. Note : All unsv parts if reqd to be replaced shall be measured and paid separately under respective item of Sch 'A' as supply only.

Supply only IGBT for UPS.

Supply only Driver card.

Supply only SMPS card.

Supply only Charger card.

Supply only Control card.

Supply only Fuse of suitable Amps.

All as per Sr item No 85 but UPS 2 KVA

Supply only IGBT for UPS.

Supply only driver card.

Supply only SMPS card.

Supply only Charger card.

Supply only Control card.

Supply only fuse of suitable Amps.

S&F Flexible PVC unsheathed twin core copper conductor cable of size 23/0.077 in nominal area and split pin all as required and directed.

Taking down Unsv shadowfree LED light for repairs and refixing same after fixing it and make it serviceable as per user requirement complete all as specified and directed by engineer-in-charge. Note : Replacement items shall be measured and paid separately.

Supply & Fix in replacement shadowfree LED Light medical equipment with arm structure double dome 96R with following specifications:- (i) light column 42 inches (ii) color temp variable 3800-5000 (iii) Number of dome 2 Nos (iv) number of leds 96 + 96 (v) (CRI) 93% (variable) (vi) spot diameter 15 CM to 27CM (vii) red color index 94 (viii) intensity control by touch panel with memory (ix) focusing type variable by central handle (x) LED arrangement (matrix type or max, shadow reduction) (xi) color temp control available with memory function (xii) power supply type 24 Volt DC (xiii) lamp housing type aluminium (xiv) luminous power (at max) 1,80,000 LUX (1.10%) per dome (xv) brightness control 2% to 100% (xvi) depth of field 2-15 inch (99cm) (xvii) penetration depth 12 inches (xviii) rotations 360 deg (optional) (xix) vertical adjustment 55.5cm to 67 cm (xx) sterizable handle available (xxi) shadow reducation per dome 100% (xxii) safety glass equipped with scratch proof safety glass (xxiii) no of suspensions one dome, two dome complete all as specified and directed by engineer-in-charge. Make : Stryker/Philips/Dr Math/SIMS or as per existing make

Supply only transformers suitable for existing shadowless light complete all as specified and directed by engineer-in-charge.

Supply only light driver of capacity 12 Volts, 6-15 Amp rating for shadowfree light, complete all as specified and directed by engr-in-charge.

Supply only SMPS box suitable for existing shadowfree light complete all as specified and directed by engineer-in-charge.

Supply only Gun metal bushes of suitable size for any type and any sweep of ceiling fans complete all as specified and directed by Engr-in-Charge.

Supply only MS clamps (Standard size) with rubber real with MS nut, bolts, check nut & split pin complete all as specified and directed by engineer-in-charge.

Supply only Canopy for ceiling fans. Make:- Usha/Khaitan/Crompton

S&F fan hook ('U' clamp nuts ,split bolts) made out of MS flat iron and made to shape as required complete all as specified and directed.

CHAHAR ENGINEERS AND COMPANY

new india engineers

KAVYA ENTERPRISES