Loading
Loading…
Loading…
Tender Value
₹2.1 L
EMD Value
₹3,110
Closing Date
25 Aug 2026, 6:00 pm2d left
P.R JHA
Office of the AM (ENM), WJ Area, Moonidih
Complete New Moulding, casting, and fitting of three (03) nos. slip rings in 37 KW, 550V slip ring motors of Moonidih Project, W.J Area
2026_BCCL_363772_1
BCCL/WJA/AM(ENM)/26-27/RP-26
Open Tender
Electrical and Maintenance Works
Percentage
20 days
Moonidih Colliery, WJ Area
Please Refer Tender Documents
5 documents required · 5 mandatory
₹3,110
14 Aug 2026
14 Aug 2026
27 Aug 2026
14 Aug 2026
25 Aug 2026
14 Aug 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Complete New Moulding, casting, and fitting of three (03) nos. slip rings in 37 KW, 550V slip ring motors of Moonidih Project, W.J Area | |||||
| 1.01 | Aluminum Bronze (AB-1)non-ferrous metal (Containing AL, MG, CU, Zn, Si) | 45 | Kg. | - | - |
| 1.02 | Mica Tape | 9 | Roll | - | - |
| 1.03 | Insulating Nomex Paper | 3 | Kg. | - | - |
| 1.04 | Varnish | 6 | Kg. | - | - |
| 1.05 | Araldite/Epoxy Compound | 6 | Tube | - | - |
| 1.06 | Moulding | 3 | Nos. | - | - |
| 1.07 | Casting | 3 | Nos. | - | - |
| 1.08 | Machining as per size | 3 | Nos. | - | - |
| 1.09 | Fitting at site with hydraulic press/Pressure M/C | 3 | Nos. | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 2.45 MB
BOQ_376680.xls
BOQ • 0.25 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].