REPAIRS MAINTENANCE OF WATER SUPPLY INSTALLATION INCL MISC WORKS B AND R AT ALHILAL MIL STN

Amount

Taking down chowkats or frames with shutters (without taking off shutters from the frames) n. exc. 1.5 sq.m each complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from frames) area exceeding 1.50 square metre and not exceeding 4.0 square metre each complete all as specified and directed.

S&F pressed steel frames of size 165mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc and providing one shop coat of primer,complete all as specified and directed.

S&F 35mm thick factory made 2nd class hard wood rail and style plain framed, panelled shutter with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS:1003 (part 1) kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F 35mm thick, 2nd class hard wood, factory made, glazed & skeleton shutters, open rebated and prepared to receive glass, gauze etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. Sizes of members of shutters as specified in SSR Part I, Section 8, Clause 8.24 (a) complete all as specified and directed.

S&F 300 mm size (length of bolt) aluminium alloy, anodised, sliding door bolt with hasp and staple ,(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed.

S&F 3mm thick figured glass, pin head type and glazing with oil putty in squares n.exc. 0.50 sq.m in each pane, complete all as specified and directed.

S&F 100 mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.

S&F 150 mm size (length of bolt) aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed

S&F 150 mm size aluminium handles, cast type, anodised complete all as specified and directed.

S&F rolled mild steel bands,straps,supports or stays for rainwater,ventilating pipes, including bolts, if required; hooks(stays), heavy, for large gates, hook and pintle hinges;large hasps and staples;chains;hand made sliding bolts;clamps;hold fasts;wall ties;hooks for hanging fans;plain angle cleats for securing purlines to wooder trusses conform to Fe-290 Gde E-165 complete all as specified & directed.

M&L PCC type B-0 (1:2:4) using 12.5mm graded crushed stone aggregates as in filling of steel chowkats or frames complete all as specified and as directed.

M&L preparation of new steel surfaces of any description not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide,zinc chrome primer complete all as specified and directed.

M&L preparation of new wooden surfaces of any description not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed.

S&F well seasoned 2nd class hard wood small fitting such as cleats, brackets of any type,latch and hinge blocks,shaped door and windew stops and the like including all necessary labours articles n.exc 200 Cu.cm each including 50 mm size cold rolled mild steel medium weight butt hinges, complete all as specified and as directed.

S&F stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc., complete drilled for fixing of steel sheeting of other covering, doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) conforming to Fe 410-W (Grade E-250) complete all as specified and directed.

S&F mild steel, plain, black sheet 1.00mm thick as in door, chullah hoods etc. cut to size edges beaded if directed, holes punched; including round headed screws, clout nails or rivets and fixed to wooden or steel members etc., with plain 40mm lap joints or welded/riveted seams including bending, turning up, mitred angles, stopped ends, outlets etc. as required complete all as specified and directed.

Demolition of cement concrete unreinforced in ground floors, kota stone, granite flooring, tiles flooring and paving’s not exceeding 15cm thickness (below or above ground level) and removal unserviceable materials, debris and rubbish to a distance not exceeding 100m complete all as specified & directed.

M&L 50 mm thick PCC (1:3:6) type C-1 using 20 mm graded crushed stone aggregate laid in alternative bays area not exc 2 sqm each as in plinth protection laid to slope of 1 in 12 including finishing the surface even & fair & filling the joints (6 mm wide) with mastic filling i.e one part of bitumen 85/25 or VG-30 and 3 parts of sand by weight complete all as specified & directed.

M&L 75mm thick PCC 1:3:6 type C-2 (40mm graded crushed stone aggregate) as in sub base of floors/ paver block/ path etc finishing the surface even & rough without using extra cement complete all as specified and directed.

M&L 60 mm thick rubber moulded coloured machine pressed precast concrete interlocking paver block any shape and size (shape as approved bt GE) laid in path,porch,hard standing or flooring etc conforming to IS-15658-2006, M-35 grade over and including 25 mm thick layer of sand cushioning, complete all as specified and directed .

Demolition of brickwork or stone/boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facing, dressed stone work precast concrete articles complete all as specified and directed.

M&L brick work with sub class 'B' bricks, straight or curved on plan exc 6 m mean radius built in Cement mortar 1:6, complete all as specified and directed.

M&L plain cement concrete 1:2:4 type B-1 using 20 mm graded crushed stone aggregate cast in situ in lintels up to 1.5 m clear span, cills steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings up to 60 cm in height, copings, kneelers, apex stones(fixing hold fasts), bed plates, water through and the like including weathering, slightly rounded or chamfered angles and throating including use of form work (straight or curved) complete all as specified & directed.

M&L extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mi- tred/stopped ends etc. complete all as specified and directed.(inner girth only measured)

M&L plain cement concrete,1:3:6 type C-1 (using 20mm graded crushed stone aggregates) as in surface channels or drains etc, complete all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc and removal of rubbish off the premises and leaving the work clear of any plastering complete all as specified & directed.

M&L rendering 15mm thick plaster in cement mortar(1:6) on stone/brick masonry wall surfaces or surfaces other than fair faces of brick work or one side of lathing, finished even and smooth without suing extra cement complete all as specified and directed. Note: Height G+2

M&L rendering 15mm thick plaster in cement mortar(1:4) on stone/brick masonry wall surfaces or surfaces other than fair faces of brick work or one side of lathing, finished even and smooth without suing extra cement complete all as specified and directed. Note: Height G+2

Supply only liquid water proofing compound complete all as specified and directed.

M&L preparation of old plastered surfaces of walls and applying two or more coats distempering with first quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre,of approved manufacturer,of required shade and colour complete as per manufacturer's specification over and including 1mm thick plaster of paris putty to prepare the surface even and smooth complete all as specified and directed.

M&L preparation of new plastered surfaces of walls and applying two or more coats distempering with first quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre,of approved manufacturer,of required shade and colour complete as per manufacturer's specification over and including 1mm thick plaster of paris putty to prepare the surface even and smooth complete all as specified and directed.

Preparation of new plastered surfaces of walls and applying two or more coats of 100% premium acrylic emulsion paints having VOC content less than 50 gms/litre, and UV resistance as per IS 15489-2004,alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additived @1.43 litre/10 sqm over and including priming coat of exterior primer applied @0.90litre/10 sqm on new surface complete all as specified and directed.

Preparation of old plastered surfaces of walls by complete removal of existing treatment and applying two or more coats of 100% premium acrylic emulsion paints having VOC content less than 50 gms/litre, and UV resistance as per IS 15489-2004,alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additived @1.43 litre/10 sqm over and including priming coat of exterior primer applied @0.90litre/10 sqm on new surface complete all as specified and directed.

M&L for repair of Honeycomb, construction joint, cracks repair and injection ground reconditioning of RCC water tank as follow:- (i) Chipping all loose concrete and cement plaster on the surface and desilting if any. (ii) All construction cold joints and cracks cutting 8mm 20mm (U, V shape). Cleaning of joints properly bond coat of SBR based bonding agent slurry coat. Filing of joints cracks with high strength durable strong structural repair polymer fiber reinforced modified mortar- Shall Fix-FRM & Shalimar DAM-lt. (iii) Drilling holes in the concrete surface using electric drill for fixing of PVC Nozzles (4 to 6 inch DISTANCE) at specified joints areas only wherever cracks, construction joints and honey comb area only using 12-14 mm dia. Drilled upto 6 inch deep in the RCC structure placed ans fixed with STP quick setting under water repair mortar. Chemical to be injected by using manual pump at pressure of up to 40 psi injecting STP SHALI GROUT IP or SHALI SBR NON SHRINK FLOWABLE POLYMERISED LIQUID- pressure through injection pump. Checking & sealing removing of nozzles after injection process is over. (iv) After successful surface preparation apply PRIMER + 3 COAT of SHALICEM EWP. Highly Elastic Cementitious Elastomeric coating with reinforcement fiber glass net of 40/50 gsm- food grade coating with sorinkaling of sand.

M&L preparation of new or old plastered surface by cleaning and washing of wall, floor and ceiling by alum and applying two coats of Dr. Fixit (Pidifin 2K) or equivalent complete all as specified and directed.

M&L preparation of new or previously untreated plastered surface of wall, ceiling, floor and applying two coats of epoxy paint (Food grade non toxic for drinking water) complete all as specified and directed.

Dismantling of old rested plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering etc. complete all as specified and as directed.

Dismantling timber scantlings 40Sq.cm and over in section, in any position complete all as specified and directed.

S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified, compete all as specified and directed. (Colour as approved by GE)

M&L pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, facia and fixed with self tapping screws as specified. (Colour as approved by GE)

S&F mild steel roof trusses (framed), trussed, purlins, crane gantries. rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc, Fe 410-W (Grade E-250) complete all as specified and directed.

M/S Bharmouri Construction