BASANTKUNJ YOJNA STHIT JOGGERS PARK ME VARTMAN VIDYUT BHAR KE SAPEKSH 400KVA TRANSFORMER KI APURTI EVAM STHAPANA KA KARYA

S.I.T.C. 400 KVA 11KV/433V, 50Hz, 3 phase Della/Star connected ONAN out-door type oil filled Transformer with Dyn-11 vector group suitable for floor mounting the transformer shall have Off Load Top Changer in steps of 2.5% from +10% to -10% and shall confirm to 1S: 1180/15: 2025 1977 Level II (latest edition). Transformer shall be complete with: Oil conservator. Oil cooling fines/tube radiators on either side of the oil tank containing the HT & LT windings. The windings shall be with copper layered for LT side and Cu fall for Hf side with class A Insulation. :Transformer-1S:1180 (Part-I ):2014 :Oil - 1S: 335 :1993 HT side of the transformer shall be suitable for cable termination with porcelain bushing conforming to 1S: 2099, complete with cable end-bar & cable disconnecting chamber and the LT side suitable for Cobles termination with Epoxy bushing conforming to 1S: 3347 as follows: HT Side: 1x3 C* 120 sq.mm. XLPE cable. LT Side: 2*3.5 C *185 sq.mm. XLPE cable. :Transformer shall be provided with Winding Over Temperature indication and trip devices :Transformer shalt be provided with a Marshalling box with all the wiring for safely, measuring and Indicating devices wired and terminated in It.

Supplying and erection of three piece nonlinear resistor type lightning arrestor suitable for 3 wire, 11 KV overhead lines with rated voltage 9 KV (rms) with a nominal discharge current rating of 5 KA and complete with galvanised clamping arrangement,G.I. bolts, nuts, washers etc. as required.

S\E of 11 KV TPMO switches on poles including handle rod etc. complete in all respects as approved by E\I.

S\E of 11 KV D.O. fuse set on poles complete in all respects as per approval of E\I.

Supply and burying of 600mm x 600mm x 6mm G.I. plate vertically for earthing with its top at least 3 metres below ground level complete with 20mm dia G.I. pipe and funnel for watering and one earthing lead of two no. 8 to 10 SWG GI wire in 15mm dia G.I. pipe up to switch board (from appron to switch board the cost of G.I. pipe and G.I. wire will be extra) 30cm square C.I. frame with hinged cover masonry housing alternate layers of charcoal/coke and salt at least 150mm thick alround etc. as per directions of Engineer-in-charge complete in all respect.

ENCAPSULATED PIPE - IN- PIPE EARTHING Supply and burring of Safe Earthing Electrode T-19 (Hot Dip Galvanized), Length up to 2000mm, outer pipe 50mm, inner pipe 25, terminal Dia 12 mm, outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30cm square C.I. frame with hinged cover & masonry husing (from electrode terminal to switch board, cost of 25 x 3 G.I . strip will be extra) Make: As approved in U.P. P.W.D., & C.P.R.I. Certified.

Painting of the electric pole with 2 coats of aluminium paint over red oxide primer complete in all respect.

S/F of 3 Phase 10 ways distribution consumer board for Arial Bunch Conductor complite with fixed on pole all complite as per UPPCL specification or as per direction of E/Ic.(Approved Rate)

Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc., 50 sq. mm 3-1/2 core

High Tension 11 KV Grade XLPE, Deduct in item no. 501 (I) 501 (t) and 506 (a) to (f) when cables is passed through G.I./M.S. or Hume pipe in road crossing or along the wall. The cost of the G.I. pipe, hume pipe is to be extra when and where required.

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required., 63 mm dia (CD-63 mm & ID-51 mm nominal)

"Supply& Making of folowing straight through heat shinkable joints with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade. 185 Sqmm 3 Core