PROVISION OF MARRIED ACCOMMODATION FOR OFFICERS EP AND CIVILIANS AND

Amount

SCHEDULE "A" Part - I (BUILDING WORKS) Details of prepriced schedule is given in tender documents.

SCHEDULE "A" PART-II ( EARTH WORK AND SITE CLEARENCE) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-III (INTERNAL WATER SUPPLY) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-IV (INTERNAL ELECTRIFICATION) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-V (ROAD/PATH/CULVERT) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-VI (SEWAGE DISPOSAL) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-VII (AREA DRAINAGE) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-VIII (EXTERNAL WATER SUPPLY) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-IX (EXTERNAL ELECTRIFICATION) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-X (SOLAR WATER SUPPLY) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-XI (CONDUIT FOR TELEPHONE) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-XII (REFRIGERATION AND AIR CONDITION) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-XIII (STREET LIGHT) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-XIV (LIGHTENING PROTECTION) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-XV (OBSTRUCTION LIGHT) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-XVI (FALSE CEILING) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART -XVII (MISCELLANIOUS ITEMS) Note:- This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under Col.' E ' signifies this fact only.

INTERNAL WATER SUPPLY S & F Angular stop cock 15 mm dia, quarter turn Make - Jaquar Model No CQT-23059 or equivalent in Crab Tree/Kohler brand.

S & F Sink cock with swinging casted round shape spout (Wall mounted model) 20 mm dia, quarter turn Make - Jaquar Model No CQT-23347 or equivalent in Crab Tree/Kohler brand.

S & F two way bib cock 15 mm dia. Make - Jaquar Model No CQT-23041 or equivalent in Crab Tree/Kohler brand.

S & F Push tap any colour high pressure of PTMT screwed for iron pipe (20mm) and fixed suitable for urinals, (Minimum weight 20mm-75gms) complete all as specified.Make - Jaquar / Crab Tree/Kohler brand.

S & F Brass chromium plated shower rose 125mm size complete all as specified.Make - Jaquar / Crab Tree/Kohler brand.

S & F Bib tap Bore dia of pipe in 15mm standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm- 90gms/20mm-125gms). Complete all as specified.Make - Jaquar / Crab Tree/Kohler brand.

S & F Brass CP mixer 15mm for mixing hot & cold water screwed down iron pipe and fixed complete all as specified.Make - Jaquar / Crab Tree/Kohler brand.

INTERNAL ELECTRIC SUPPLY S & F modular type bell ding dong of 2 module size, conforming to IS: 8884- 1978 complete all as specified and directed. Make: Legrand Arteor Cat-Part No. 5734 43 or equivalent model of Havells or Anchor

S & F modular type 1 module RJ 11 telephone socket with shutter complete all as specified and directed. Make: Legrand Arteor Cart-Part No. 5734 26 or equivalent model of Precision or other make approved by GE

S & F modular type 1 module TV socket complete all as specified and directed. Make: Legrand Arteor Cat-Part No. 5734 25 or equivalent model of Precision or other make approved by GE

S&F 18/20W recess mounted LED down light , extruded aluminium housing with high efficiency diffuser and integrated electronic driver with high efficiency long life LED chips, PF>.90, System luminous efficacy >80, Operating voltage 140V-270V, 50/60Hz including electrical connection with 3 core flexible Cu conductor cable of appropriate size Complete all as spd and directed. Make: Wipro cat No CRDL11R023HP57/ Philips Cat No Green Perform DN395B LED20S-6500PSU WH or equivalent in OSRAM

S&F 20W surface/Wall mounted LED Luminaire , extruded aluminiumhousing with PC diffuser and integrated electronic driver with high efficiency long life LED chips, CRI=80(Minimum) PF>.95, System luminous efficacy >100, Operating voltage 140V-270V including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to LED fitting Complete all as spd and directed. Make: Baja Cat No BLTRU 20W WH VIVA/ Philips Cat No BN 308C-LED-2220S-6500/ Osram cat No Luxpower Batten 19WL840.

S&F 10/12W surface mounted round shape LED downlight with minimum efficacy 85 lumen/W, high qualitypolycarbonate opal concave diffuser, high reflective polycarbonate conical shape reflector, input voltage 220-240V, input frequency 50-60Hz including electric connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to fixture complete all as spd and directed. Make: Wipro Cat No LW01-101-xxx-60xx/ GE cat No 93057384/ Bajaj Cat No BGCML12WWH.

S & F 18/20 W Surface mounted round shape LED downlight (PORCH) having long life SMD LED mounted on MCPCB with high LED efficacy of > 85 lumen/W, high quality polycarbonate opal concave diffuser, high reflective polycarbonate conical shaped reflector, integral SPMS based constant current electronic LED driver with THD < 20%, surge voltage protection and other safety tests as per IS: 15885 (Part-2/Sec-13): 2012, housed in white powder coated pressure die-cast aluminium heat sink and white finish polycarbonate ring for holding the diffuser having input voltage 220- 240 V, input frequency 50- 60 Hz, PF > 0.95, including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed. Make:Bajaj Cat NoBGSL018W WHRD /Orient Cat No EDGE SURFACE or equivalent in Osram/Wipro

S & F 24/25W LED street light having high efficiency long life LED module with SMD LED package mounted on MCPCB with high LED efficacy of ≥ 100 lumen/W, integral SMPS based constant current electronic LED driver with THD < 20%, surge voltage protection and other safety tests as per IS: 15885 (Part-2/Sec-13): 2012, IP 66 protection, high effiency polycarbonate cover with integrated lens housed in pressure die-cast aluminium alloy heat sink for effective thermal management, sturdiness, excellent corrosion resistance, separate optical and control gear compartment & top opening for easy maintenance, suitable for side entry, pole mounting with bracket arm OD 35 mm to 42 mm including necessary electrical connection to the fixture with 3 core flexible Cu conductor cable of appropriate size and 1.5 m long bracket, having 25 mm diameter light grade GI pipe, including GI clamps, nuts, bolts & washers with two coats of synthetic enemal paint over a coat of red oxide primer complete all as specified and directed. [Make: BAJAJ 169799 BRTFG 45W LED I or equivalent model of Havells, Philips or Wipro] Wipro Cat No LR02-291-XXX-57XX/ GE Cat No PALM-MIN or equivalent in Philips

S & F BEE five star rated energy efficient high-speed ceiling fan having 1200 mm blade sweep, air-flow not less than 210 CMM, operating voltage 220-240 V and frequency 50 Hz, including a downroad of suitable size and electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fan complete all as specified and directed. Make: Crompton Cat-Part No. ENTRUST50 or Havells Cat- Part No. ES-50 or equivalent model of Usha or BAJAJ

S & F engery efficient non-metalic fresh air fan having blade sweep 250 mm, air delivery not less than 860 CMH, operating voltage 220-240 V and frequency 50 Hz, including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fresh-air fan complete all as specified and directed. Make: Crompton Cat-Part No. VENTILUS 10" or equivalent model of Usha, Havells or BAJAJ

S & F engery efficient metalic exhaust fan having blade sweep 300 mm, air delivery not less than 900 CMH, operating voltage 220-240 V and frequency 50 Hz, including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fresh-air fan complete all as specified and directed. Make: Crompton Cat-Part No. TRANS AIR 12" or equivalent model of Usha, Havells or BAJAJ

S & F ISI marked MCB for AC applications till 63 A/125A , having breaking capacity Icn = 10 kA, conforming to IS/IEC 60898-1-2002, sliding bottom clamp, colour coded on/off indication on dolly, biconnect IP 20 protected lower terminals and sliding shutters, complete all as specified and directed. Make: Schneider, Legrand, Siemens

6 A, SP MCB, C- curve

10 A, SP MCB, C- curve

16 A, SP MCB, C- curve

20 A, SP MCB, C- curve

32 A, SP MCB, C- curve

32 A, TP MCB, C- curve

63 A, FP MCB, C- curve

125 A, FP MCB, C- curve

S & F vertical triple pole & neutral, double door, metallic modular distribution board conforming to IEC 61439-3, suitable for flush / surface mounting with provision for MCCB up to 160 A as incomer and SP/TP MCBs as outgoing, reversible metal door, fully insulated 250 A copper busbar for each phase, two fully insulated & shrouded neutral bars, two earthbars, cable ties for cable management, prefitted masking sheet, etc. having IK 09 & IP 43 protection complete all as specified and directed. NOTE: MCCB/MCBs shall be measured and paid separately.

Vertical triple pole and neutral DB, 4 way Add Make: Schneider cat no A9HVD04LT/ Legrand cat No 507745 / Equivalent in Siemens

S&F Three phase static energy meter of accuracy class 1.0, 240V, 50Hz with backlit LCD, Optical port & RS 232 port display of rating 10-60A with DLMS compliance as per IS 15959(Measures Kwh, KVAh,V,I,PF, Frequency, KW,KVA, six month history of energy & MD in KW & KVA and anti temper features and load profile complete all as spd and directed. Make: HPL/L&T/Secure

S&F single phase static energy meter of accuracy class 1.0, 240V, 50Hz with backlit LCD, Optical port & RS 232 port display of rating 10-60A with DLMS compliance as per IS 15959(Measures Kwh, KVAh,V,I,PF, Frequency, KW,KVA, six month history of energy & MD in KW & KVA and anti temper features and load profile complete all as spd and directed. Make: HPL/L&T/Secure

M & L for Earthing complete with galvanized steel earth plate electrode of 60 cm x 60 cm x 6 mm size, buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanised steel wire of diameter 4.0 mm as earth lead, by means of bolts, buts, check nuts and washers of galvanised iron or steel, galvanized iron pipe of 15 mm diameter, connected to earthing test point, all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion and including excavation, earthwork, PCC earth pit of dimensions 550 mm X 550 mm (outer) and 300 mm X 300 mm (inner) and 250 mm deep, with a 10 mm thick CI cover, hinged to CI frame on ground level, GI watering pipe, funnel, etc. as all specified and directed.

SEWAGE DISPOSAL Septic tank designed to carry sewage and sullage water, exc in any type of soil, PCC 1:4:8 below foundation, vent shaft, connection etc complete for 25 users.

Septic tank designed to carry sewage and sullage water, exc in any type of soil, PCC 1:4:8 below foundation, vent shaft, connection etc complete for 50 users.

Soakage well excavation in any type of soil, foundation in PCC 1:3:6 walls of honey combed masonary with top ring of M25 concrete incl intercepting chamber and screen chamber made of Brick masonary in CM RCC error slab in M25 /SFRC cover inter connecting pipe of RCC/DWC complete filled with brick bates of size 2.40M dia x 3.00M depth.

Soakage well exc in any type of soil, foundation in PCC 1:3:6 walls of honey combed masonary with top ring of M25 concrete incl intercepting chamber and screen chamber made of Brick masonary in CM RCC error slab in M25 /SFRC cover inter connecting pipe of RCC/DWC complete filled with brick bates of size 3.60M dia x 3.00M depth.

AREA DRAINAGE Supply, Installation/lowering submersible pumpset discharge 490LPM and Head 36m electric driven 415V, TP suitable for 200mm dia bore well, stainless steel body, water filled, fitted with non return value to prevent back flow with submersible cable operating as per manufacturer instructions all as specified and as directed by Engr-in-charge.

EXTERNAL WATER SUPPLY Supply, laying and jointing in trenches DI pipes class K7 of standard length spigot and socketed end push type joint with rubber gasket as jointing material, internal cement mortar coating an external surface with bituminious paint of size 100 mm dia ISI all as spd and directed. Make: Electrosteel/ Jindal Saw/ TATA

Supply, laying and jointing in trenches DI pipes class K9 of standard length spigot and socketed end push type joint with rubber gasket as jointing material, internal cement mortar coating an external surface with bituminious paint of size 150 mm dia ISI all as spd and directed.

Supply, laying and jointing in trenches DI pipes class K7 of standard length spigot and socketed end push type joint with rubber gasket as jointing material, internal cement mortar coating an external surface with bituminious paint of size 150 mm dia ISI all as spd and directed.

Supply & fix Stop valve, cast copper alloy (ISI marked) screwed down high pressure with crutch or butterfly handle, screwed both ends (externally threaded) for iron pipe or for unions and fixed complete all as specified and as directed for 63mm dia pipe. Make:Zoloto/Leader/Venus

Supply, installation and testing of CI sluice valves 100 mm dia flanged end class - I PN 1.0 as per IS 14846 heavy duty with stainless steel spindle and iron wheel at the top flanged end incl two Nos of flange joint incl jointing materials ie bolts and nuts all as directed. Make:L&T/Kirloskar/Zoloto/Kesin

Supply, installation and testing of CI sluice valves 150mm dia flanged end class - I PN 1.0 as per IS 14846 heavy duty with stainless steel spindle and iron wheel at the top flanged end incl two Nos of flange joint incl jointing materials ie bolts and nuts all as directed. Make:Kirloskar/Zoloto/Kesin/L&T/Leader

Supply, installation and testing of CI sluice valves 80mm dia flanged end class - I PN 1.0 as per IS 14846 heavy duty with stainless steel spindle and iron wheel at the top flanged end incl two Nos of flange joint incl jointing materials ie bolts and nuts all as directed. Make:Kirloskar/Zoloto/Kesin/L&T/Leader

M&L for valve reflux with by pass arrangement supplied and installed complete of size 80 mm dia bore. Make:Zoloto/Leader/Venus/L&T

M&L for valve reflux with by pass arrangement supplied and installed complete of size 50 mm dia bore. Make:Zoloto/Leader/Venus/L&T

Material and labour for construction of for Valve Pit /Chamber in PCC solid block masonry (1:5:8) built in CM 1:6 ,over 150 mm thick PCC foundation 1:3:6 type C2, 10mm thick internal CM 1:6 & 12mm thick external plaster in CM 1:4 provided with 3 mm thick MS sheet cover and MS angle iron chamber frame fixed in coping in PCC 1:2:4 type B-1 with locking arrangement and handle, painting of MS work with one coat of red oxide primer and two coat of synthetic enamel black paint complete including excavation & earth work in any type of strata complete all as shown on drawing No.CEAA/TD/57sheet No 1.1,dated 28.05.92,amended upto 31.12.92, but of internal size 1050mm(L) x 750mm(B) x 1000mm (D) etc complete all as specified and directed. Note : Excavation Retuning filling is including in the item

Material and labour for construction of for Valve Pit /Chamber in PCC solid block masonry (1:5:8) built in CM 1:6 ,over 150 mm thick PCC foundation 1:3:6 type C2, 10mm thick internal CM 1:6 & 12mm thick external plaster in CM 1:4 provided with 3 mm thick MS sheet cover and MS angle iron chamber frame fixed in coping in PCC 1:2:4 type B-1 with locking arrangement and handle, painting of MS work with one coat of red oxide primer and two coat of synthetic enamel black paint complete including excavation & earth work in any type of strata complete all as shown on drawing No.CEAA/TD/57sheet No 1.1,dated 28.05.92,amended upto 31.12.92, but of internal size 900mm(L) x 750mm(B) x 900mm (D) etc complete all as specified and directed. Note : Excavation Retuning filling is including in the item

Supply, installation and testing of Air release valves 50 mm dia flanged end class - I PN 1.0 as per IS 14846 heavy duty with stainless steel spindle and iron wheel at the top flanged end incl two Nos of flange joint incl jointing materials ie bolts and nuts all as directed. Make:L&T/Kirloskar/Zoloto/Kesin

Supply, Installation, testing of dosing pump, electric operated, single phase, cap 20 ltr/hr, PTFE coated EPDM diaphragm complete all as specified and directed. Make TOSHCON JESCO, Model- TJ-MD 20. or equivalent

Supply only calcium hypochlorite granules containing 65% free chlorine in 45 Kg container complete all as specified and directed

Supply, testing and commissioning of centrifugal pump set of discharge capacity 900 LPM at 40 mtr head,Split casing type,80x80mm suction/dischargeand coupled with suitable rating induction motor 3 phase 415 volts, 50 Hz, mounted on MS chanel/common base plate and fixed with suitable bolts, grouted in PCC foundation , 30 CM above floor level including PVC insulated single core unsheathed copper conductor of 06 sqmm size drawn in PVC conduit for connection from starter to motor terminal, including the following accessories. (i) Foot valve - 01 No of size suitable for suction of pump. (ii) Gun metal butterfly Gate valve - 01 No of size suitable for delivery of pump. (iii) flanged GI Medium grade suction pipe of dia as spd by manufacturer to a length not mote than 9 m. (iv) Delivery pipes GI mediumgrade of dia as spd by manufacturer to a length not more than 6m. (v) pressure gauge on delivery of pump ser. (vi) Interconnection of delivery mains of pump I and II. (vii) 20mm GI pipe line for priming. (viii) 20mm Gun Metal Gate valve (priming valve) - 01 Nos.

M & L for LT panel Board cubical KIOSK Indoor type compact 415 Volts AC 50 Hz, 4 wire +E, fabricated from Polycarbonate, Nominal Size 900mm X600mmX 660mm, RAL 7035 finish confirming to IP 54 complete including Cu bus bar 100 Amps, 4 strip mounted on porcelain insulated & enclosed in chamber, bottom cable entry comprising of following: (a) Incoming MCCB 63 Amps 4 pole with microprocessor based release having breaking capacity 36 KA.....01 Nos. (b) Outgoing MCB 63 Amps 415 V, Four Pole, 36KA....02 Nos. (c) Outgoing Star Delta starter 10 HP … 02 Nos (d) Digital Voltmeter 0-500 V 96x96xm …. 01 No (e) Digital Ammeter 0 - 500 A 96x96m …. 01 No (f) Indicating lamps set RYB …. 01 set. (g) Panel mounted type digital multifunctional energy meter, CT operated, LT 3 phase, 4 wire, including ct ratio 200/5....01 Nos

Material and Labour for DI fittings and fixtures Bends (any type, radius and angle) tapers any type, (straight, bend, increasing, decreasing or double socket etc.) Tee pieces single branch. "Y" junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs upto 150mm bore.

Material and labour for drilling trial bore through direct hammering (DTH) technique in any type of strata consisting of 250 mm dia drill bit for depth upto 200 m in sequance from ground level as given below for bore well complete as per IS- 2800 Part-1 1991. The following tests and reporting will be carried out by the contractor and approved by GE all as per IS- 2800 part 1 1991:- (i) Recording the well discharge during driling by a 90 degree V-notch (ii) Recording the water bearing horizon . (iii) Taking the samples from the bore well cutting for every 3 meter interval and every change in slrata if less than 3meter. (iv) Prepartion of litho logs based on these samples. (v) Drill time log to be prepared and prescribed. (vi) Aquifer performance tests at constant discharge with draw down and recovery reading. (vii) Interpretation of data and preparation of hydro scientific report for designing of submersible pump and artificial recharge studies.

Supply assembling, jointing, lowering and fixing in the bore hole uPVC Casing pipe of Nominal Dia 200 mm (medium well) ,7.5 mm thickness.confirming to IS12818-2010 including providing peagravel of 8 mm to 4.6mm size for packing around the casing/slotted pipe in bore well all as specified and directed. Make: Astral/Ashirwad/Ajay

Supply assembling, jointing, lowering and fixing in the bore hole uPVC slotted pipe of Nominal Dia 200 mm (medium well) ,7.5 mm thickness.confirming to IS12818-2010 including providing peagravel of 8 mm to 4.6mm size for packing around the casing/slotted pipe in bore well all as specified and directed. Make: Astral/Ashirwad/Ajay

S&F ball plug 200mm bore all as specified and directed.

S&F well cap 200mm size threaded and similar to housing pipe all as specified and directed.

S&F 2 Nos MS flat iron 100mmx10mm thick size clamp for holding with 250mm bore housing pipe including casting of PCC block of size 1200mmx1000mmx1000mm in PCC (1:2:4) type B-1 using 20mm graded stone aggregate including 150mm bore MS pipe 2 No. each, 1.5 metre long with cap plug and cap top for feeding pea gravel for each bore well as specified and directed.

Developing the tube well by means with 250 PSI air compressor all as specified in IS-11189-1985 Para 4.3 and as directed.

Developing the tube well by means of over pumping all as specified and as directed. Note :- Over pumping will be carried out by pumping the well at higher capacity i.e. not less than 50% above the yield of well.

Supply only strata sample box with glass cover 3mm thick having internal dimension 100x100x600mm made out of 20mm thick wood with hinges, hasp and staple including polishing complete with samples at various strata met in boring including strata chart in duplicate

Yield testing of the tube well as specified and directed to determine the safe pumping capacity of tube well.

Electric logging in pilot bore for precise delineation of granular zones as also the quality of ground water including report interpretation complete as specified. Note:- Electric logging shall be carried out by any approved Govt Agency or geologist.

Chemical and bacteriological testing or water sample from approved laboratory to ensure potability of water complete all as directed.

Supply, Assembling, Jointing, lowering lead free uPVC column pipes of nominal dia 65 mm, OD 75 mm (min), Non toxic, Pressure 10 Kg/Cm2 with and including Top and Bottom adaptor (SS) and accessories like EPDM ring and double SS stud all as spd and directed by Engineer-in-Charge. Make: Astral/Ashirwad/Ajay

Supply, installation/Lowering Submersible pumpset, discharge 150 LPM and head 80 m,Electric driven, 415 V, TP suitable for 200/250 mm dia borewell, stainless steel body, water filled,fitted with Non return Valve to prevent backflow,with submersible cable of rating as per manufacturer (from panel to submersible motor, length of cable as per site requirement) all as spd and directed by Engineer-in-Charge. Make: Crompton Greaves/ KSB/ Kirloskar brothers/ texmo

Supply and fix pump guard set with flange 63 mm all as specified

Design, Supply, install, test and Commission Raw water filteration Plant cum RO Plant of 10000 LPH cap (Minimum) with pretreatment filter,activated carbon filter, UV system and dosing system complying with following requirements. Make : Fontus water Ltd/ Thermax/Optimus Enviro Pro Pvt Ltd. (a) Raw water pump : Cap 16 cum/hr, head 35m, electric operated 415 Volts , 50 HZ, including electric motor fitted on common platform, starter complete (1Working+1Standby) , MAKE - Kirloskar /Crompton /CRI (b) Sedimentation filter : NGMF 195 -Down flow type, Sand filter, Made of FRP of minimum size, 36 inch Dia ,72 inch Height (can be modified to higher size as per design), treatment flow rate 16500 LPH, at test pressure 150 psi including its connected items such as CPVC pipe line 63 mm (minimum size), multiport valve, valves and gauges as per manufacturer design., mix graded filter Media, Average porosity Less than 100Micron ,Bed depth 915mm (minimum) all as specified. (c) Activated Carbon filter : NGMA 160 - Made of FRP, 36 inch Dia ,72 inch Height (Can be modified to higher size as per design), treatment flow rate 16500 LPH at test pressure 150 psi, including CPVC pipe line, multiport valve, valves and gauges as per manufacturer design, mix graded filter Media consisting of Coarse Silex,Fine Silex Activated carbon and Bed depth 915 (minimum) all as specified. (d) Antiscalent dosing system with digital display : Cap 6 LPH including dosing tank of cap 150 ltr and its connection with inlet and out let tubing ,inlet NRV and outlet NRV ,automation with level switch. (e) UV System for 20 Metre Cube /hr flow rate. (f) Interconnecting pipelines valves. Plant control panel including DOL starter for raw water pumps and switches for UV System. (g) Pressure Vessel

(h) High pressure pump : Multistage, Centrifugal vertical pump, rated flow cap not less then 10 metre Cube//hr, ,stainless steel housing and impeller, 3phase Motor as per design of RO Plant (j) Micron Filteration Plant cartridge filter assembly with cartridge of 10 micron normal rating. (k) Control Panel : Electronically contol motor protection to prevent the motor from dry run, single phasing/over loading , starter for pumps auto/manual operation mode as per plant design including cabling with copper conductor of appropriate rating (l) RO System for 10 Meter Cube/ hr flow rate. (m) Interconnecting pipelines, valves, (Existing sump). (n) Parameters for Treated water. (i) TDS upto 400 PPM. (ii) PH 6.5 to 8.5. (iii) Free Residual Chlorine - 0.2mg/ltr (o) Chlorine dosing plant of capacity 20 ltr/hr. (p): Interconnecting pipe line work from outlet of fileration plant to Inlet of RO System and outlet of RO System to Sump upto 10 RM (Approx) of appropriate size as recommended by manufacturer. NOTE :- (i) Inlet and outlet pipe (CVPC) of designed size upto 10 metre deemed to be included in unit rate. (ii) Parameters of inlet water as under :- (a) Tubidity. (i) Inlet > 9.00 (ii) Outlet < 1.00 (b) TDS<2500PPM

EXTERNAL ELECTRIC SUPPLY Supply, installation, testing and commissioning 3 phase and neutral, 415 volts factory made free standing, floor mounting, dust and vermin proof cubical type, LT panel fabricated from 1.6 mm thick ( minimum) CRCA sheet with anti corrosive coating and finally epoxy polyester powder coating of flint Grey shade (RAL-7032), fully compartmentalized design with 4 Nos of busbars made of high conductivity 99.9% pure copper of ETP grade suitable for 1000 amps pre-wired with suitable size of copper strip, short circuit rating 50 KA (rms) for one second including suitable aluminium earth strips conforming to IS and all as specified with supply and fixing the following:- (Make: ABB/Siemens/Schneider/Areva/ BCH / L&T / C&S) INCOMING :- (i) ACB 630 amps 4 pole ultimate breaking capacity 50 KA draw out type with Microprocessor based protection unit with LED screen ,motorised operating system suitable for 415V complete all as specified 01 No (ii) Digital Multifunctional Panel meter of size 96X96 mm and three current transformer of suitable ratio and capacity. OUTGOING :- (i) MCCB 160 amps 4 pole ultimate breaking capacity 36 KA with electronic releases suitable for 415V complete with Rotary handle complete all as specified 03 No (ii) MCCB 250 amps 4 pole ultimate breaking capacity 36 KA with electronic releases suitable for 415V complete with Rotary handle complete all as specified 03 No (Make: ABB/Siemens/Schneider/Areva/ BCH / L&T / C&S)

M & L for LT panel Board cubical / modular design KIOSK Outdoor type compact 415 Volts AC 50 Hz, 4 wire +E, fabricated Polycarbonate, RAL 7035 finish for stand confirming to IP 55 complete including Copper bus bar 400 Amps, 30 KA, 4 strip mounted on porcelain insulated & enclosed in chamber, bottom cable entry comprising of following :- Location :FP-I, FP-IV. Make:- Universal/Neptune/Hensel/L&T (a) Incoming MCCB 250 Amps four pole with microprocessor based release, having breaking capacity 36 KA, ---01 No (b) Outgoing MCCB 100 Amps four pole with microprocessor based release, having breaking capacity 25 KA, ---05 No. (1 Being Spare) (c ) Outgoing MCB 40 Amps, Four Pole,Breaking Capacity 25KA...........02 Nos (d) Digital Multifunctional panel meter for Amp, Volt,KWH, power factor and other parameter flush mounting of size 96 x96 mm all as spd and directed. (e ) Platform for the feeder pillar board with PCC 1:2:4, type B1 using 20 mm graded stone aggregate 15 cm thick on foundation in cm 1:6 on exposed surfaces and 100 mm thick PCC 1:3:6 type C1 using 40 mm graded stone aggregate as in padding on top and grouting bolts etc for panel. The platform shall be of 450mm height above GL and of adequate size and having minimum 300 mm all around the feeder pillar board for movements.Make for Panel:

M & L for LT panel Board cubical / modular design KIOSK Outdoor type compact 415 Volts AC 50 Hz, 4 wire +E, fabricated Polycarbonate, RAL 7035 finish confirming to IP 54 complete including copper bus bar 400 Amps, 30 KA, 4 strip mounted on porcelain insulated & enclosed in chamber, bottom cable entry comprising of following :- ( Location :FP-III & FP-ii ) Make:- Universal/Neptune/Hensel/L&T (a) Incoming MCCB 160 Amps four pole with microprocessor based release, having breaking capacity 36 KA, ---01 No (b) Outgoing MCCB 100 Amps four pole with microprocessor based release, having breaking capacity 25 KA, ---04 No. (1 Being Spare) (c ) Outgoing MCB 63 Amps, Four Pole,Breaking Capacity 10 KA...........05 Nos (d) Digital Multifunctional panel meter for Amp, Volt,KWH, power factor and other parameter flush mounting of size 96 x96 mm all as spd and directed. (e ) Platform for the feeder pillar board with PCC 1:2:4, type B1 using 20 mm graded stone aggregate 15 cm thick on foundation in cm 1:6 on exposed surfaces and 100 mm thick PCC 1:3:6 type C1 using 40 mm graded stone aggregate as in padding on top and grouting

Supply and fix High Voltage Synthetic rubber Insulating Mat, Thickness 2.5 MM for up to 11 KV,With ISI marked, CPRI Tested and ISO & CE, Certified. Class-B, Category-III .As per IS:15652:2006. With Green colour strip of size Size: 2mm (T) X 1 Mtr(W) X 10 Mtrs(L). all as spd and directed. Make: Electromat/ Jyoti

Supply and fix cable jointing kit for 1.1 KV grade cable for straight through joint complete with Jointing material heat Shrink type and accessories suitable for 3 ½ / 4 core XLPE, armoured, Aluminium conductor cable of following size

(a) 25 sqmm to 50 sqmm

(b) 120 sqmm to 150 sqmm

(c) 185 sqmm to 240 sqmm

Supply and lay double wall corrugated (DWC) high density polythene pipes having corrugation on the outer wall and plain surface on the inner wall confirming to ISI 14930 ( Part I and II) for protection of underground calbes of size 90 mm outer dia with all fittings. laid in trenches / road/ nallah or fixed along wall. poles or laid under floor (including cutting floor/Road and making good to match with existing adjoining surface etc for cable protection all as specified (excavation and earth work shall be measured and paid separately) Make: Rex/Poly/Gemini.

Supply & fix cable route indicator made out of 40mm x 40mm x4mm mild steel angle iron 1 metre long and mild steel plate of size 100mm x 150mm x 6mm welded only on one side and having embosed on plate as cable HT including PCC 1:2:4 type B1 of size 30cmx30cmx30cm and embedding angle iron including excavation and earth work complete all as specified and directed.

Supply & fix cable route indicator made out of 40mm x 40mm x 4mm mild steel angle iron 0.6 metre long and mild steel plate of size 75mm x 60mmx6mm welded only on one side and having embosed on plate as cable LT including PCC 1:2:4 type B- 1 of size 30cm x 30cm x 30cm and embedding angle iron including excavation and earth work complete all as specified and directed by Engineer - in - Charge.

Supply & fix 11KV drop out fuse single pole with insulators,barrel and suitable rating of fuse element as per site requirement complete all as specified and directed.

Supply and lay double wall corrugated (DWC) high density polythene pipes having corrugation on the outer wall and plain surface on the inner wall confirming to ISI 14930 ( Part I and II) for protection of underground calbes of size 63 mm outer dia with all fittings. laid in trenches / road/ nallah or fixed along wall. poles or laid under floor (including cutting floor/Road and making good to match with existing adjoining surface etc for cable protection all as specified (excavation and earth work shall be measured and paid separately) Make: Rex/Poly/Gemini.

Supply and lay double wall corrugated (DWC) high density polythene pipes having corrugation on the outer wall and plain surface on the inner wall confirming to ISI 14930 ( Part I and II) for protection of underground calbes of size 110 mm outer dia with all fittings. laid in trenches / road/ nallah or fixed along wall. poles or laid under floor (including cutting floor/Road and making good to match with existing adjoining surface etc for cable protection all as specified (excavation and earth work shall be measured and paid separately) Make: Rex/Poly/Gemini.

M&L for painting to prestressed cement concrete poles in alternative bands with black and white colour starting with black colour (each band of 30 cm wide) in two coats with super enamelled paint including preparation of surface, up to 1.5 m height all as specified

Supply and installation of prefabricated distribution modular distribution Bus bar air insulated 1000 amp rating 415 Volt 4 bus bars 50KA and IP 54 all as spd Make: Legrand/ABB/Schneider/C&S

SOLAR WATER HEATER Supply, laying & testing PVC insulated, PVC sheathed cable galvanized steel strip or wire armoured, electric control cables (Heavy duty) with stranded copper conductor of size 2.5 sq mm , 3core, 1100 Volts grade. MAKE: V-Guard/AE/Bluebird

REFRIGERATION & AIR-CONDITION S & F automatic Voltage Stablizer of capacity 4 Amps/ 1 KVA MAKE : V-Guard/AE/Bluebird

S & F automatic Voltage Stablizer of capacity 5 KVA MAKE : V-Guard/AE/Bluebird

Supply and installed Refrigerator elect driven single phase, single door, 3 star having capacity 192 ltrs all as spd and directed. Make: Samsung/Whirlpool/LG

Supply and installed Refrigerator elect driven single phase, single door, 3 star having capacity 215 ltrs all as spd and directed. Make: Samsung/Whirlpool/LG

Supply and installed Refrigerator elect driven single phase, double door, auto defrost with inverter compressor, 3 star having capacity 275 ltrs all as spd and directed. Make: Samsung/Whirlpool/LG

Material and Labour for Earthing complete with galvanised steel earth electrode 60 cm x 60 cm x 6 mm as earthing lead burried directly in ground vertically to a depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below ground level connected to galvanised iron strip 32×6mm as earthing lead by means of bolts,nuts, check nuts and washer etc made of galvanised iron including 40 mm bore GI pipe medium grade up to 7.5 metres long all as shown in electrcial plate No.3 of SSR Part I 2009 and as specified or indicated and testing on completion including excavation/ earth work in any type of strata, PCC (1:3:6) type C1 earthing chamber, precast RCC slab 50 mm thick in reinforced cement concrete (1:2:4) type B1 reinforced with welded steel wire fabric (XPM weight not less than 4 Kg/Sqm), cast iron frame, funnel with wire mesh, 20 mm bore medium grade GI watering pipe, lugs, 40 mm bore medium grade GI protection pipe, test point etc. complete all as specified and as directed by Engr-in-charge. Note: (i) Item includes the cost of 7.5 metre GI pipe for protection of earth lead. Any aditional in length shall be adjusted through deviation order. (ii) Item includes trhe cost of 7.5 metre GI earth lead. Any additional in length shall be measured and paid under respective item of this Schdule.

STREET LIGHT Supply and lay double wall corrugated (DWC) high density polythene pipes having corrugation on the outer wall and plain surface on the inner wall confirming to ISI 14930 ( Part I and II) for protection of underground calbes of size 63 mm outer dia with all fittings. laid in trenches / road/ nallah or fixed along wall. poles or laid under floor (including cutting floor/Road and making good to match with existing adjoining surface etc for cable protection all as specified (excavation and earth work shall be measured and paid separately) Make: Rex/Poly/Gemini

Supply and fix octagonal hot-dip galvanized street light poles including junction box, height 7 mtrs, top dia 70mm, bottom dia 130 mm, sheet thickness 3 mm, base plate 220x220x12 ,foundation nut bolts as per manufacturer recommendation including reinforced cement concrete foundation and hot dip galvanised bracket SINGLE arm for fixing of street light and one no of MCB 6 amp including 25 Amp four way terminal block all as spd and directed. MAKE: BAJAJ/SURYA/PHILIPS/ CG

Supply & fix LED lights, Nominal watt 35/36 Watt, Nominal lumen efficacy 90 lumen/Watt, high pressure die cast aluminium housing, 140-270V, 50 Hz, PF>0.95 LED street light luminaries to be mounted on octagonal hot-dip galvanized street light poles including 3 core 1 sqmm PVC insulated copper cable from control box to fitting complete all as spd and as directed by Engr-in-Charge Make: Philips)/ Wipro(Skyline) /Osram(Strada plus) complete all as spd and directed

Supply and fix octagonal hot-dip galvanized street light poles including junction box, height 7 mtrs, top dia 70mm, bottom dia 130 mm, sheet thickness 3 mm, base plate 220x220x12,foundation nut bolts as per manufacturer recommendation including reinforced cement concrete foundation and hot dip galvanised bracket DOUBLE arm for fixing of street light and one no of MCB 6 amp including 25 Amp four way terminal block all as spd and directed. MAKE: BAJAJ/SURYA/PHILIPS/UTKARSH

M & L for LT panel Board cubical Indoor type, wall mounted compact 415 Volts AC 50 Hz, 4 wire +E, fabricated Polycarbonate, Nominal Size 1590 mmX 953mmX 321mm, RAL 7035 finish confirming to IP 54 complete including Cu bus bar 200 Amps, 4 strip mounted on porcelain insulated & enclosed in chamber, bottom cable entry, compartmentalised design comprising of following. (a) Incoming MCCB 63 Amps four pole with Microprocessor based release having breaking capacity 25KA, ---01 No (b) Outgoing MCCB 32 Amps TP 16KA…..2Nos (1 being spare) (c) Indicating lamps set RYB - 01 set (d) Supply and fix Time switch 415 v 3 phase with Power contactor 40 Amp

OBSTRUCTION LIGHT Supply, and fix LED obstruction light luminaire in yellow painted Die cast aluminium alloy housing with accessories all as spd and directed make: Bajaj Cat No BGAV 302 and Halonix Cat no HLAOL-S01-06 RED

S&F Air Break switch having polymeric insulator, single break, tilting type, vertical mounting comprises of hot dip galvanized channel iron base having 3 Nos 11KV rate current 200A with operating mechanism worked from GL for isolation of Transformer. Make: RPG/Pactil.

M&L for lightning arrestor single pole zinc oxide surge type having voltage rating 12KV rated frequency 50Hz, nominal discharge current 10KA (Heavy duty) complete with all fittings suitable for 11KV, 3 Phase earthed distribution system complete all as spd and directed. Make: RPG/Pactil.

S&F Pin type polymeric insulator confirming to IEC, 11KV, 5KN with galvanized fixing arrangement all as spd and directed. Make: Raychem/ RPG/Pactil.

S&F Ball and socket type polymeric insulator, 11KV, 45KN confirming to IEC completes all as spd and directed. Make: Raychem RPG/Pactil.

S & F Distribution Board cum Meter box wall mounting type fabricated from polycarbonate sheet, IP 54 compartmentalized design, bus bar chamber 100Amp, TPN Cu strip insulated with heat shrinkable insulating material, Cable gland of suitable size prewired and comprising of following :- (For Type-II) Make:Hensel/Neptune/Universal/ L&T (a) MCCB cap 40 Amp, 4 Pole, 16 KA - 01 No. (b) MCB SP 25 Amp, 10 KA - 04 Nos (c) MCB SP 10Amp,10KA-01 nos (d) 05 Nos of cubical for housing single phase meter all as specified and as directed (e) Terminal for distribution

S & F Distribution Board cum Meter box wall mounting type fabricated from polycarbonate sheet, IP 54 compartmentalized design, bus bar chamber 100Amp, TPN Cu strip insulated with heat shrinkable insulating material, Cable gland of suitable size prewired and comprising of following :- (For Type III) Make:Hensel/Neptune/Universal/ L&T (a) MCCB Cap 63 Amp, 4 Pole, and 16 KA - 01 No. (b) MCB SP 32 Amp, 10 KA - 06 Nos (c) MCB SP 10Amp,10KA-01 nos (d) 07 Nos of cubical for housing single phase meter all as specified and as directed (e) Terminal for distribution

S & F Distribution Board cum Meter box wall mounting type fabricated from polycarbonate sheet, IP 54 c compartmentalized design, bus bar chamber 100Amp, TPN Cu strip insulated with heat shrinkable insulating material, Cable gland of suitable size prewired and comprising of following :- (For Type IV) Make:Hensel/Neptune/Universal/ L&T (a) MCCB cap 63 Amp, 4 Pole, 25 KA - 01 No. (b) MCB SP 40 Amp, 10 KA - 04 Nos (c) MCB SP 10Amp,10KA-01 nos (d) 05 Nos of cubical for housing single phase meter all as specified and as directed (e) Terminal for distribution

S & F Distribution Board cum Meter box wall mounting type fabricated from polycarbonate sheet, IP 54 compartmentalized design, bus bar chamber 100Amp, TPN Cu strip insulated with heat shrinkable insulating material, Cable gland of suitable size prewired and comprising of following :- (For Type V). Make:Hensel/Neptune/Universal/ L&T (a) MCCB cap 63 Amp, 4 Pole, 25 KA - 01 No. (b) MCB SP 40 Amp, 10 KA - 02 Nos (c) MCB SP 10Amp,10KA-01 nos (d) 03 Nos of cubical for housing single phase meter all as specified and as directed (e) Terminal for distribution

Supply and Fix MCCB with electronic earth leakage module of capacity 125 A, 4 Pole, Icu 16 KA complete all as spd and directed. Make: Schneider/Legrand/Seimens

Supply and Fix MCCB with electronic earth leakage module of capacity 63/80A, 4 Pole, Icu 16 KA complete all as spd and directed. Make: Schneider/Legrand/Seimens

Supply and lay Double wall corrugated (DWC) high density polythene pipes 50/38mm dia having corrugation on the outer wall and plain surface on the inner wall confirming to ISI 14930 ( Part I and II) for protection of earth strip with all fittings. laid in trenches / road/ nallah or fixed along wall. poles or laid under floor (including cutting floor/Road and making good to match with existing adjoining surface etc for cable protection complete all as spd and as directed by Engineer-in-Charge. Make : Gemine (excavation and earth work shall be measured and paid separately)