Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.5 LAccepted-AOC | L1 | Accepted-AOC Lowest bid | |
| 2 | L2₹3.6 L+₹7,000.98 (1.98%)Rejected-Finance SUBHADRA K T CHAVAKKAD | L2 | Rejected-Finance More than the lowest bid |
Tender Value
₹3.8 L
EMD Value
₹9,524
Closing Date
28 Jan 2025, 6:00 pmClosed
Assistant Engineer, Chowannur BP
Office of Assistant Executive Engineer Chowannur Sub division Kanippayyur P O PIN 680517
Bore well , Motorshed, Main pipeline
2025_LSGD_728126_1
AE/CHNR/NEW/03/76/2024-25
Open Tender
Civil Works - Others
Item Rate
365 days
KANIPPAYYUR
Please refer Tender documents.
7 documents required · 7 mandatory
₹840
Yes
₹9,524
Yes
17 Jul 2025
21 Jan 2025
30 Jan 2025
21 Jan 2025
28 Jan 2025
21 Jan 2025
Amount
Bore well
OD352754/2024-2025:Drilling 150mm dia borewell suitable to accomodate 180mm internal dia PVC casing pipe as per specification including all cost conveyance ,labour charges etc...complete
OD352758/2024-2025:supplying and fixing 180mm PVC Casing pipe (6kgf/cm2)to the borewell including cost of materials fixing charges etc complete
OD352757/2024-2025:supplying ISI MARKED 180MM PVC CAP
OD352755/2024-2025:Testing the water taken from the borewell to know the probability and yield and providing certificate from the authorised laboratory by ground water development
OD352752/2024-2025:Provision for water quality test
OD352756/2024-2025:Supplying and fixing RCC ,well cover for 180 mm bore well
Motor shed
2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil
4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)
50.6.1.5:Solid block masonry using pre cast solid blocks ( Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 Part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete
5.9.3:Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform
5.3:Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 150 landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size).
5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more
13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
50.13.1:9 mm cement plastering of mix : 1:3 (1 cement : 3 fine sand ) including all cost of materials, labour charges etc complete
13.7.1:12 mm cement plaster finished with a floating coat of neat cement of mix:1:3 ( 1 cement : 3 fine sand)
10.5.2:Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using flats 30x6 mm for diagonal braces and central cross piece
13.46.1:Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
13.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work
Pipe Line
OD352750/2024-2025:Excavating trenches of required width for pipes ,cables etc including excavation for sockets and dressing of sides ,ramming of bottoms,depth upto 1.5m,including getting out the excavated soil and then returning the soil as required,in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming,watering etc and disposing of surplus excavated soil as directed,within a lead of 50m.All kinds of soil.pipes,cables etc not exceeding 80mm dia (2.10.1.1 modified)
18.19.5.1:Providing and fixing gun metal non-return valve of approved quality (screwed end): 65 mm nominal boreHorizontal
OD359664/2024-2025:Supplying and fixing PVC pipes of 90MM 10 kg including specials from the stacking place at site with solvent cement etc., lowering in to the trenches already made, placing in position, aligning the pipeline to the line and level jointing the pipe and specials with solvent cement and testing the pipeline with water to the required test pressure, including hire charges for all tools testing equipment cost and conveyance of water etc.. complete
OD368037/2024-2025:Supplying and fixing PVC Valve (90 mm dia) of good quality as per directions of departmental officers at site
NARAYANAN T (BID ID -2079192)
Bidder Name
NANDANAN M
NARAYANAN T
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1159666.pdf
boq_comp_chart.xlsx
xlsx
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .