Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8.2 LAccepted-AOC | L1 | Accepted-AOC accept | |
| 2 | L2₹8.7 L+₹45,769.54 (5.55%)Rejected-Finance DISTT KANGRA HP | KANGRA | HIMACHAL PRADESH | 176001 | L2 | Rejected-Finance reject | |
| 3 | L3₹9.7 L+₹1.4 L (17.2%)Rejected-Finance CHANDRONA TEHSIL NOHRADHAR DISTRICT SIRMOUR H P | L3 | Rejected-Finance reject |
| Sl No | Description | Qty | Unit | M/S ASHOK KUMAR L3 | ANISH SHARMA L1 | SANJAY KUMAR L2 |
|---|---|---|---|---|---|---|
| 1.00 | Excavation in foundation, trenches etc. in earth work in all kinds of soil lift upto all height, stacking the excavated soil not more then 3 mtrs. clear from the edge of excavation & then returning the stacked soil in 15cm layers when required into plinth sides of foundation etc. consolidating each deposited layer by ramming & watering and then disposing of all surplus excavated earth as directed within all leads and lifts. | 5.85 | cum | 207 ₹1,210.95 | 170 ₹994.5 Lowest | 250 ₹1,462.5 |
| 2.00 | Providing and laying cement concrete 1:3:6(One cement : three sand : six graded stone aggregate 40mm moninal size) excluding the cost of form work in centring & shuttering in foundation and plinth as per direction of Engineer in charge within all leads and lifts. | 7.6 | cum | 5,477 ₹41,625.2 | 3,800 ₹28,880 | 3,450 ₹26,220 Lowest |
| 3.00Providing and laying cement concrete 1:1.5:3 (One cement:one & half sand:three graded stone aggregate 20mm nominal size) and curing complete excluding the cost of form work and reinforcement for concrete work in:- | ||||||
| 4.00 | In Foundation, fotting bases of columns and the like and mass concrete within all leads and lifts. | 17.49 | cum | 7,800 ₹1,36,422 | 6,500 ₹1,13,685 Lowest | 6,700 ₹1,17,183 |
| 5.00 | Wall ( any thickness but not less than 0.10 mtrs thickness ) attached pillaster, buttresss plinth & string courses etc. from top of foundation level upto floor two level within all leads and lifts. | 34.2 | cum | 7,800 ₹2,66,760 | 6,500 ₹2,22,300 Lowest | 6,900 ₹2,35,980 |
| 6.00Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm, so as to give a fair finish including centring, shuttering, strutting and propping etc. with wooden battons and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4.00mtrs. and removal of the same for in-situ-reinforced and plain concrete work in:- | ||||||
| 7.00 | Vertical surfaces such as w all(any thickness) partitions and the like including attached pilasters, buttresses, plinth & string courses etc.and the like.complete in all respect. | 353.77 | sqm | 237 ₹83,843.49 | 130 ₹45,990.1 Lowest | 150 ₹53,065.5 |
| 8.00 | flat surfaces such as soffits of suspended floor, roofs landing & the like within all leads and lifts complete in all respect. | 3.83 | sqm | 297 ₹1,137.51 | 140 ₹536.2 | 120 ₹459.6 Lowest |
| 9.00 | Providing in RCC work smooth finishing of the exposed surface with cement motor 1:3 (One cement:Three sand) within all leads and lifts. | 357.59 | sqm | 77 ₹27,534.43 Lowest | 150 ₹53,638.5 | 80 ₹28,607.2 |
| 10.00 | Providing tor steel reinforcement for RCC work including bending and ballies complete (cost fof posts, struts and straining bolts shall be paid for separately.within all leads and lifts | 4,301.63 | Kgs | 89 ₹3,82,845.07 | 75 ₹3,22,622.25 Lowest | 89 ₹3,82,845.07 |
Tender Value
₹12.0 L
EMD Value
₹24,019
Closing Date
10 Jul 2025, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
EE
Jal Shakti Division Jawalamukhi
desilting tank LIS Silh
2025_HPIPH_109121_1
JAM-KNG02-742
Open Tender
Civil Works
Item Rate
90 days
Jawalamukhi
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
EE Jawalamukhi
₹24,019
14 Oct 2025
1 Jul 2025
10 Jul 2025
1 Jul 2025
10 Jul 2025
1 Jul 2025
Amount
Excavation in foundation, trenches etc. in earth work in all kinds of soil lift upto all height, stacking the excavated soil not more then 3 mtrs. clear from the edge of excavation & then returning the stacked soil in 15cm layers when required into plinth sides of foundation etc. consolidating each deposited layer by ramming & watering and then disposing of all surplus excavated earth as directed within all leads and lifts.
Providing and laying cement concrete 1:3:6(One cement : three sand : six graded stone aggregate 40mm moninal size) excluding the cost of form work in centring & shuttering in foundation and plinth as per direction of Engineer in charge within all leads and lifts.
Providing and laying cement concrete 1:1.5:3 (One cement:one & half sand:three graded stone aggregate 20mm nominal size) and curing complete excluding the cost of form work and reinforcement for concrete work in:-
In Foundation, fotting bases of columns and the like and mass concrete within all leads and lifts.
Wall ( any thickness but not less than 0.10 mtrs thickness ) attached pillaster, buttresss plinth & string courses etc. from top of foundation level upto floor two level within all leads and lifts.
Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm, so as to give a fair finish including centring, shuttering, strutting and propping etc. with wooden battons and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4.00mtrs. and removal of the same for in-situ-reinforced and plain concrete work in:-
Vertical surfaces such as w all(any thickness) partitions and the like including attached pilasters, buttresses, plinth & string courses etc.and the like.complete in all respect.
flat surfaces such as soffits of suspended floor, roofs landing & the like within all leads and lifts complete in all respect.
Providing in RCC work smooth finishing of the exposed surface with cement motor 1:3 (One cement:Three sand) within all leads and lifts.
Providing tor steel reinforcement for RCC work including bending and ballies complete (cost fof posts, struts and straining bolts shall be paid for separately.within all leads and lifts
Steel work welded in built up sections, trusses and framed work, including cutting , hosting , fixing in position and applying a priming coat of relead paint (In gratings framed gurad bars, ladders, raillings, brackets and similar works.)
Providing and laying in trenches GMS/MS tubes (L/M class) tube fitting (earth work in trenches to be measured and paid for separately) within all leads and lifts.
Scour pipe 100 mmdia
Providing and fixing CI sluice valve (with hand wheel) as per IS: 780-1984 class-I upto 300 mm dia upto 300 mm dia (i/c brass spindle & as per 2906-1984 class-II for dia> 300mm ) complete with bolts nuts, rubber insertion etc.( the tail piece if required shall be measured & paid for seperately) complete in all respect.
For out let pipe 100mmdia
Constructing chamber for sluice valve, with C.I.surface box 100mm top dia,160mm bottom dia & 180mm deep(inside) with chained lid RCC top 1:2:4 mix (One cement : Two sand :Four graded stone aggregate 20mm nominal size)100mm thick foundation concrete 1:5:10 (One cement : Five sand : Ten graded stone aggregate 40mm nominal size) and in side plastering with cement mortor 1:3 (One cemet : Three sand) finished with a floating coat of neat cement including curing complete 600x600x750mm in side size with 150mm thick walls of RCC 1:2:4 )One cement:two sand : four graded stone aggregate 20mm nominal size complete with form work and reinforcement with 6mm bars at not exceeding 150mm centres both ways within all leads and lifts.
SANJAY KUMAR (BID ID -533316)
M/S ASHOK KUMAR (BID ID -532862)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .