Construction of 02 Classroom Framed Structure in Different Primary School of Bodeli and Sankheda Taluka in Chhotaudepur District.

NAME OF WORK: Construction of 02 Classroom Framed Structure in Different Primary School of Bodeli and Sankheda

Taluka in Chhotaudepur District.

NAME OFSCHOOL: FERKUVA PRIMARY SCHOOL , NAGAR VADA PRIMARY

TALUKA :- BODELI , SANKHEDA

M DESCRIPTION OF ITEM QTY 1% L.C Estimated Amount

2024-25 L.C Unit

Excavation for foundation upto 1.5 m depth including

sorting out and stacking of useful materials and

1 disposing off the excavated stuff upto 50 Meter lead.(B)

Dense or hard soil

CH-4 ITEM CODE 04001B PG-32

Excavation for foundation for depth from 1.5 m to 3.0 m

including sorting out and stacking of useful materials

and disposing off the excavated stuff upto 50 Meter 82.60 172.83 1.73 174.56 Cmt

Dense or hard soil

CH-4 ITEM CODE 04002B PG-32

Providing & laying Cement Concrete 1:2:4 (1 Cement :

Coarse Sand : 4 graded stone aggregate 20 mm nominal size) &

3 curing complete excluding cost of form work Below Tie beam

& Plinth protection.

CH-5 ITEM CODE 05010AA PG-36

Providing and laying controlled cement concrete M.150 for

curing complete including cost of formwork and excluding

cost of reinforcement for reinforced concrete work in 13.76 4108.26 41.08 4149.34 Cmt

(A) Foundations, footings,Base of columns and Mass

concrete (Cement Level 290 Kg)

Brick work using common burnt clay building bricks having

crushing strength not less than 35 kg./Sq.Cm. in foundationand

5 plinth in Cement Mortar 1:6. (1‐ Cement : 6 ‐finesand)(C) Fly

CH-6 ITEM CODE 6002CA PG-47

Filling with the available excavated earth (excluding rock) in

trenches, plinth, sides of foundation etc. in layers not exceeding

6 20cm in depth consolidating each deposited layer by ramming

CH-4 ITEM CODE 04006 PG-33

Filling foundation and plinth with murrum or selected soil in

layers of 20 cm. thickness inculding watering, ramming and 369.98 301.58 3.02 304.60 Cmt

consolidation etc. complete.

CH-4 ITEM CODE 04008A PG-33

Providing and laying controlled cement concrete M.250 for

curing complete including cost of formwork and excluding

cost of reinforcement for reinforced concrete work in (a) 53.42 4409.57 44.10 4453.67 Cmt

Foundations, footings Bases of columns and the like and Mass

conrete work in footing. (Cement Level 380 Kg)

Providing & laying Cement Concrete 1:4:8 (1 Cement :4

Coarse sand :8 hand brocken stone aggregates of 40mm nominal 34.42 2753.58 27.54 2781.12 Cmt

size) in plinth and curing complete excluding cost of formwork.

CH-5 ITEM CODE 05004A PG-36

M DESCRIPTION OF ITEM QTY 1% L.C Estimated Amount

2024-25 L.C Unit

Providing and laying controlled cement concrete M.250 for

curing complete including cost of formwork and excluding

10 cost of reinforcement for reinforced concrete work in

Plinth Beams. (Cement Level 380 Kg)

Brick work using common burnt clay building bricks having

crushing strength not less than 35Kg./Sq.Cm. for superstructure

11 in cement mortar 1:6(1 cement :6 fine sand) including curing

etc. complete. (C) Fly Ash Bricks For all heights and all floor

CH-6 ITEM CODE 6002CA +6006C PG-47

Half brick in common brunt clay building bricks having

crushing strength not less than 35 Kg/sq.cm in cement mortar

12 1:4 (1 cement : 4 coarse sand) (C) Fly Ash Bricks in super

structure including curing etc. complete.For all floors

CH-6 ITEM CODE 6008A2A +6010B PG-48/49

Providing and laying controlled cement concrete M.200 for

curing complete including cost of formwork and excluding

13 cost of reinforcement for reinforced concrete work in

Beams for all floors level. (Cement Level 360 Kg)

Providing and laying controlled cement concrete M.250 for

curing complete including cost of formwork and excluding

14 cost of reinforcement for reinforced concrete work in

Column Up to Plinth & all floors.. (Cement Level 380 Kg)

Providing and laying controlled cement concrete M.200 for

curing complete including cost of formwork and excluding

15 cost of reinforcement for reinforced concrete work in

Column for all floors level. (Cement Level 360 Kg)

Providing and laying controlled cement concrete M.200 for

curing complete including cost of formwork and excluding

16 cost of reinforcement for reinforced concrete work in

Slab for all floors level. (Cement Level 360 Kg)

Providing and laying controlled cement concrete M.200 for

curing complete including cost of formwork and excluding

cost of reinforcement for reinforced concrete work in 10.64 7373.16 73.73 7446.89 Cmt

sloping slabs & Staircase having thickness more than 10 cm and

upto 20 cm thickness.For all floors. (Cement Level 360 Kg)

Providing and laying controlled cement concrete M.200 for

curing complete including cost of formwork and excluding

cost of reinforcement for reinforced concrete work in

18 Chhajja for all floors level including finishing with cement

mortar 1:3 ( 1 cement :3 Sand ) and curing etc complete.

(Cement Level 360 Kg)

M DESCRIPTION OF ITEM QTY 1% L.C Estimated Amount

2024-25 L.C Unit

Providing I.S.I. T.M.T Bars Fe.500D steel reinfocement (ISI

mark) Confirmed to IS-1786 for R.C.C.work including Cutting,

19 bending, binding and placing in position etc. complete.For all

CH-5 ITEM CODE 05014C PG-37

Providing 10mm thick cement plaster in single coat on on

brick/concrete walls & Ceilling & Soffit of stair interior

20 plastering in cement mortar 1:4(1 cement 4 sand) watering,

curing etc. complete.For all floors

CH-17 ITEM CODE 17001B+17004A PG-83

Providing 15mm thick cement plaster in single coat on rough or

fair side of single or half brick wall for interior plastering in

21 cement mortar 1:4(1 cement 4 sand) watering, curing etc.

complete.For all floors

CH-17 ITEM CODE 17002A+17004A PG-83

20mm thick sand faced cement plaster on walls above ground

level consisting of 12mm thick backing coat of cement mortar

1:3(1 cement 3 sand) and 8mm thick finishing coat of cement 505.44 350.48 3.50 353.98 Smt

mortar 1:1(1 cement 1 sand) watering, curing etc.complete for

CH-17 ITEM CODE 17009 PG-84

Provinding & applying three coat of 100% acrylic base matt

finishing exterior paint of approved manufacture of required

shade on external surface to give an even shade after throughly 505.44 120.93 1.21 122.14 Smt

brushing the surface free from morter dropping & other foreign

Providing & laying 24"x24" vitrified 8mm thick tiles flooring

over 20mm (average) base of cement mortar

1:6(1cement:6course sand) on new surface or fixing on exiting

flooring by adhesivematerial including dismentalling of existing

24 flooring and jointed with colour cement slurry including finish

with flush pointing and cleaning the surface etc. complete for

antiskid.(As Per List of Approved Materials) for Light/Dark

shade as per the given pattern.

(Item No- 14021A , Pg No- 79)

Providing and laying 25 mm th. Polish Kota stone slab flooring

over 20mm. (average) base of cement mortar 1:6 (1 cement :6

25 coarse sand) of L.M. 1:1.5 and laid and jointed with grey

cement slurry including rubbing and polishing complet.

(Item No- 14012BA (14.43) , Pg.No. 78)

Providing & laying cement concrete flooring over 40 mm

(average) thick base of cement flooring 1:2:4 (1cement:2 coarse

sand:4 graded stone aggregates 20mm normal size) laid in one 42.04 301.38 3.01 304.39 Smt

layer finished with a floating coat of neat cement curing etc.

(Item No-14015AA (14.71) , Pg.No. 79)

Providing cement vata (10cmx10cm size)quarter round in

cement mortar 1:1 including neat cement finishing,watering etc. 22.66 24.04 0.24 24.28 Rmt

(Item No-17015, Pg.No. 84)

M DESCRIPTION OF ITEM QTY 1% L.C Estimated Amount

2024-25 L.C Unit

Providing & Fixing in position M.S.Angle 40mmx40mmx6mm

Angle frame for door and 35mmx35mmx5mm angle frame for

28 shutters,18 gauge iron sheet of shutters with 4 nos.of hold fasts 466.56 109.22 1.09 110.31 Kg

for door as per the approved drawong & design including

applying a priming coat.

(Item No-10025AA, Pg.No. 58)

Providing & Fixing in position M.S.Angle 35mmx35mmx6mm

frame for windows & ventilation 25mmx25mmx5mm angle

29 frame for shutters, 18 gauge iron sheet of shutters with 4nos. Of 446.68 109.22 1.09 110.31 Kg

hold fasts for windows & Ventilation as per the approved

drawing & design including applying a priming coat.

(Item No-10025AA, Pg.No. 58)

Providing & fixing M.S. Railing & M.S grill as per approved

30 drawing & design including one coat of red lead paint etc. 211.20 109.22 1.09 110.31 Kg

(Item No-10025AA, Pg.No. 58)

Painting two coats (Excluding Priming coat) on new steel and

other metal, surfaces with enamel paint, brushing,interior to

31 give an even shade including cleaning the surface of all dirt,

dust and other foreign matter etc,complete

Providing & fixing G.I rain water Spout of 65mm dia and 60cm

Distempering with dry distemper of approved brand and

manufacture (Three Coats) and of required shade on wall

surface to give an even shade, over and including a priming coat 628.75 65.36 0.65 66.01 Smt

of whiting after throughly brooming the surface free from

mortar dropping and other foreign matter.

(Item No- 18.38, Pg.No. + 18.40 Pg.No. 86 )

Providing and fixing Chicken mesh jali (22 gauge)30cm wide at

the junction of 2 different surfaces of different material

34 component at the time of plastering to prevent cracking in 423.08 38.39 0.38 38.77 Rmt

plaster surface as and where directed at all floors with all leads

and lifts etc.complete.RA-29

Providing & Laying Broken China Mosaic flooring for plain &

curve surface 12mm to 20mm of broken piece of ceramic tiles

or Glazed tiles ( one or more colour as directed by Engg. In

charge ) to be laid over cement mortar bedding of CM 1:3 to

plain or and slopes and to be tempered to bring mortar cream up

to and colour pigment including rounding of junctions and

extending them pu to 15cms along the wall and curing with

bends any patterns of designs as per deawing or directions

including cleaning with water and oxilic acid using 1 kg / 1 bag

of water proofing materials. 14035(PG. NO. 80)

36 Providing & fixing takti as per. Incharge Engineer. 2.00 3500.00 35.00 3535.00 NO

I / WE am / are willing to carry out the work at ________ % above / below (percentage should be written in figures and words) of

estimated rates mentioned above. Amount of my / our tender works out as under:

Estimated amount put to tender Rs. ________________

M DESCRIPTION OF ITEM QTY 1% L.C Estimated Amount

2024-25 L.C Unit

Deduct / Add: _____ % below / above Rs. ________________

Net Amount Rs. ________________

(Please strike out which ever is not applicable)