Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹30.9 LAccepted-AOC | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹32.2 L+₹1.3 L (4.12%)Rejected-Finance JYOTISH ROAD TEZPUR DISTT SONITPUR ASSAM 784001 | SONITPUR | ASSAM | 784001 | L2 | Rejected-Finance Second lowest bidder |
Tender Value
Refer Docs
EMD Value
₹60,000
Closing Date
7 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AMIT KUMAR PARMAR
MIITARY ENGINEERS SERVICE PO SALONIBARI DIST SONITPUR ASSAM 784104
PROVN OF SINGLE LIVING SHELTER FOR 04 Nos SUBORDINATE STAFF UNDER GE I P AF TEZPUR
2022_MES_554442_2
8133/E8
Open Tender
Civil Works
Item Rate
180 days
GE(I)(P)(AF) TEZPUR
ASPER NIT
10 documents required · 10 mandatory
₹500
GE (I) (P) AF TEZPUR
₹60,000
Yes
2 Dec 2022
17 Oct 2022
9 Nov 2022
18 Oct 2022
7 Nov 2022
25 Oct 2022
Amount
Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in soft/ loose soil.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in soft/loose soil all as specified and directed.
Excavating over areas, n exc 1.5 m deep and getting out in soft and loose soil all as specified and directed.
Returning, filling in including spreading, leveling, watering and well ramming in layers n. exc. 25 cm complete all as specified and directed
Removing of surplus excavated soil to a distance not exc. 50 m and deposited where directed at a level n exc 1.5 m above the starting point all complete all as specified and directed.
M & L for plain cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.
M&L for plain cement concrete 1:3:6 Type C1 (using 40mm graded stone aggregate ) as in drains, surface channels, etc including necessary form work complete all as specified and directed.
M&L for brick work with old size sub class 'B' bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 complete all as specified and directed.
M&L for brick work with old size sub class 'B' bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:4 complete all as specified and directed.
M&L for brick work with old size sub class 'B' bricks, straight or curved on plan to any radius in half brick thick wall built in cement mortar 1:4 complete all as specified and directed.
M&L for RCC (Design Mix) M-25 grade using 20mm graded crushed stone aggregate as in foundations including rafts,footings,foundation Beams,bases of columns etc. and the like complete all as specified and directed.
M&L for RCC (Design Mix) M-25 grade using 20mm graded crushed stone aggregate as in Columns ,Pillars, Piers,Posts and Struts etc. complete all as specified and directed.
M&L for RCC (Design Mix) M-25 grade using 20mm graded crushed stone aggregate as in slab supported on walls , beams & columns etc as in roof & the like complete all as specified and directed. (Note :- Reinforcements and formwork shall be measured and paid separately)
M&L for RCC (Design Mix) M-25 grade using 20mm graded crushed stone aggregate as in Beams,cantilever,lintel over1.5m complete all as specified and directed.
M&L for TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.
All as per item No-15 here in above but 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders -ditto-
Formwork to sides of concrete foundations, footings, bases of columns raft and raft beams sides and soffit of foundation and plinth beam and similar work similar or batte for rough finished surfaces of concrete in flat complete all as specified and directed.
Formwork to sides of pillars post, struts, piers, columns and stanctions square vor rectangular in section and similar works for rough finished surfaces of concrete in flat complete all as specified and directed.
Form work to soffits of suspended slab such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick for fair finished surfaces of concrete complete all as specified and directed.
Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers,lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams complete all as specified and directed.
Form work to edges of concrete flats, treads,breaks in floor,window cills,concrete railings,openings in concrete walls, floors and roofs n.exc20cm wide and sides of RCC/PCC bands in walls,horizontal or sloping with rough finished and similar work exc 5cm but n.exc 10cm wide complete all as specified and directed.
M&L for hardcore broken stone boulder of guage not exc 63mm, deposited, spread and levelled in layers n.exc 15cm thick watered and rammed to true surface complete all as specified and directed.
M & L for 75mm thick cement concrete 1:4:8 type D-2 (40 mm graded stone aggregate) as in sub base of floors complete all as specified and as directed.
M&L for 25mm thick cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate as in floor, finished rough to receive floor finishes complete all as specified and directed.
M&L for Sand filling in floor, spreading, leveling, watering and well ramming in layers n. exc. 25 cm complete all as specified and directed
S&F of jointless Non-Skid Ceramic tiles, coloured, superior quality 7 to 8mm thick (square/ rectangular) polished, area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floor surfaces etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick rendering in CM 1:6 complete all as specified and directed.
S&F of jointless Non-Skid Ceramic tiles, coloured, superior quality 7 to 8mm thick (square/ rectangular) polished, area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in skirting/dado set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick rendering in CM 1:4 complete all as specified and directed.
S&F of jointless Non-Skid Ceramic tiles, coloured, superior quality 7 to 8mm thick (square/ rectangular) polished, area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floor surfaces etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick rendering in CM 1:6 complete all as specified and directed.
M&L for 20-22 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs pillars, window cills ,cooking platform and like including pointing in white cement (1:2) using marble dust with admixture of pigments to match with shade or granite over including 15mm thick screed bed or bedding layer in cement mortar 1:4 complete all as specified and directed
M & L for glazed ceramic coloured tiles 450 x 300 x 7 mm thick (Ist quality) conforming to IS-13753, as in vertical surface such as skirting/dado set in neat cement slurry and pointed in coloured cement to match the surface, including 10mm thick rendering to receive tiles in CM (1:4) complete all as specified and as directed.
M&L for 75mm thick plain cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in plinth protection and footpath finished even and smooth without using extra cement, including making joints to the full depth of PCC at every 3 metres and at every change of direction and filling the same with & including bitumen and sand 1:2 by weight complete all as specified and as directed.
Treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area etc all as specified & directed
Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured) etc all as specified & directed.
Treating the top surface of filled earth at the rate of 5 litres of emulsion p er square metre of surface etc all as specified & directed.
Treating of soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area etc all as specified & directed
Treating of soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall etc all as specified & directed.
M&L for mild steel work in tubular trusses and tubular posts including special shaped washer duly welded, complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St 240 with one shop coat of Zinc Chrome primer complete all as specified and as directed.
M&L for plates (plain or chequered) channels. Square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe-290 Gde E-165 complete all as specified and directed. .
M&L for Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square but (dia of neck 5 to 10mm and 15cm but n.exc 30cm long) complete all as specified and directed.
M&L for high tensile 550 MPA yield strength Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering The sheet shall have a hot dip metallic zinc aluminium alloy coating of zinc 43.5%, aluminium (55%)and silicon (1.5%) with total mass coating of 150 gms/sqm on both sides. Covered width will be 1020mm and sheet length as per site requirement. The profile is having return leg for proper side lap. The sheet shall be fixed using self drilling/self capping screws with EDPM seal complete all as specified and directed.
All as per item No- 40 here in above but Plain sheet as in ridges/ hips / valley/Eaves and Eaves board - ditto --
S&F 4mm thick non-Asbestos fibre cement building board( E-board) false ceiling with board of size 600x600mm with powder coated GI snap grid frame work (Make: Armstrong/Saint Gobain or equivalent as approved) including cutting holes in brick wall built in cement mortar & making good in cement concrete 1:2:4 type BO/Cement mortar 1:3 complete all as specified and directed including all necessary drilling and necessary arrangement to fix electrical items as under:- (a) 27x27x0.55mm thick GI angle powder coated duly plugged @ 600mm centre to centre along perimeter of wall. (b) 25x25x0.55mm thick GI tee powder coated as main and cross runners suspended with 1.6mm dia GI wire suspenders(n.exc 1.2mtr length) with adjustable clamps and dash true fastners plugging in RCC slab/A.I Runner of slopped roof placed @ 600mm centre to centre from perimeter of wall. (c) Two coats of oil emulsion distemper over a coat of Acrylic primer on ceiling. NOTE: The complete ceiling work shall be done as per manufactures instruction and as directed.
S&F of pressed steel door framewith one or more rebatesincluding fixing lugs,hinges,lock,strike plates,of size frame 125mm x 60mm complete all as specified and directed.
S&F of 5.0 mm thick plain glass, ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and as directed.
M&L mild steel framed work such as grills, gratings etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.
S&F 35mm thick factory made, 2nd class hard wood, plain framed, panelled shutter ( two panel) double shutter with lock rails and panel of 9mm thick BWP commercial ply or 12 mm thick veneered particle board with commercial veneered facing on both faces,the size of rail and styles as per IS: 1003 ( Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.
S&F of 2nd class hardwood factory made 35 mm thick, glazed and skeleton door shutters, open rebated and prepated to receive glass gauze etc (with sash bars) edges of framing plain, chamfered or rounded materials and revated sash bars any number , edges of framing plain chemfered or rounded fitted with cut and mitred beads for securing glass in door etc or provided with styles and rails as specified in SSR part 1 section 8, clause 8.23 (a) and fitted to chowkats complete all as specified and directed .
S&F factory made Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube, supplying and fixing in opening with fittings as per specification & drawing complete.
S&F, factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain cover PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheet for top rails lock rail and bottom rail on either side & as gap insert for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the styles and rails with suitable PVC sheet beading and jointed together with solvent cement and supply & fixing in the frame at site as per specification and shown on drawing SSR Part-II (2004) all as specified..
S&F 100mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.
S&F 75mm long extruded Aluminium alloy,anodised butt hinges,C-21 fixed with steel screws complete all as specified and directed.
S&F 200mm long aluminum anodized barrel tower bolt of extruded section, fixed with screws complete all as specified and directed.
S&F 100mm long aluminum anodized barrel tower bolt of extruded section, fixed with screws complete all as specified and directed.
S&F 150mm size mild steel pressed handles, oval type, stove enamelled black complete all as specified and directed.
S&F 100mm size extruded aluminum alloy handle,cast type, anodised, fixed with screws complete all as specified and directed.
S&F 300mm long mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed.
S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or stainless steel wire staples complete all as specified and directed.
Supply and fixing Harrison rail (curtain rails), 20 mm dia, mild steel chromium plated with fixing bracket of size and pattern as per existing complete all as specified and directed.
M&L for preparation of newly steel and iron surface of any description width or girth exc 10 cm and applying two coats of synthetic enamel paint over a coat of Red Oxide primer complete all as specified and directed.
M&L for preparation of newly wood or wood base materials of any description, not otherwise described over 10 cm in width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M&L for preparation of newly wood or wood base materials of any description, not otherwise described n.exc 10 cm in width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M&L rendering 15 mm thick in cm 1:6 on fair faces of brick work or concrete surfaces finishing surfaces even and smooth without using extra cement , complete all as specified and as directed.
M&L for rendering 15mm thick( 10mm backing and 5mm floating coat) in CM 1:4 mixed with integral water proofing compound as per manufacturer instruction on floating coat as in other than fair faces of brick work or concrete surface of wall and finished surface even and smooth without using extra cement complete all as specified and directed. NOTE: WPC shall be measured and paid separately under respctive Item of schedule.
M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint over a coat of white cement base primer complete all as specified and directed.
Supply only integral water proofing compound conforming to IS: 2645 - 1975 specification complete all as specified and as directed complete all as specified.
M&L for preparation of new surfaces of wall of any description and applying two coats of oil bound distemper whte or tinted complete all as specified and directed.
M&L for plain cement concrete 1:2:4 Type B 0 (using 12.5mm graded stone aggregate as in lintels upto 1.5 M span,cills and other similar bands,Plinth courses,parapets,coping,Bed plates etc including necessary form work complete all as specified and directed.
S&Fof rotational moulded,multilayer HDPE water storage tank of 1000 ltrs capacity(Cylindrical vertical with closed top) ISI (IS 12701-1996) marked fixed in position complete all as specified including 02 Nos 20mm dia full threaded GI tank niple, 20 mm dia brass ball valve with epoxy coated Aluminium rod with high density plastic float ball( of minium weight 210 gms ) including fixing of inlet, outlet & overflow pipe etc, complete all as specified and as directed.
S&Fof rotational moulded,multilayer HDPE water storage tank of 500 ltrs capacity(Cylindrical vertical with closed top) ISI (IS 12701-1996) marked fixed in position complete all as specified including 02 Nos 20mm dia full threaded GI tank niple, 20 mm dia brass ball valve with epoxy coated Aluminium rod with high density plastic float ball( of minium weight 210 gms ) including fixing of inlet, outlet & overflow pipe etc, complete all as specified and as directed.
S&F 15 mm bore pipe medium grade galvanised iron water tube with all fittings laid in floors fixed to wall etc complete all as specified and as directed.
S&F 20mm bore pipe medium grade galvanised iron water tube with all fittings laid in floors fixed to wall etc complete all as specified and as directed.
S&F of Brass Chromium Plated tubular towel rail 20mm dia, 600mm long between flanges, fancy type, superior quality, fixed with brass screws complete all as specified and directed.
S&F vitreous china wash down water closet pan (pedestal pattern), white including connection trap and to flushing pipe, anti-syphnoge pipe white seat cover with flat bottom and cover and mild steel chromium plated or aluminised hinging device etc complete all as specified and directed.
S&F of PVC low level syphonic action flushing cistern of 10 lit capacity including siphon, PVC float with ball valve, rubber cone and flush pipe,Brackets,450 long PVC connection pipe etc complete all as specified and directed
S&F vitreous china wash hand basin white, flat back of size 550mmx400mm fixed on and including cast iron cantilever bracket 40x40x5mm cutting for and pinning in ends of brackets or errecting stand , 32mm dia CP waste coupling and 32 mm dia PVC waste pipe 450 mm long complete all as specified and directed.
S&F central hole basin mixer without popup, waste system with 450mm long braided hoses, brass chromium plated, fancy type with all accessories and fixed complete all as specified and directed.
S&F PVC connections 15mm bore size 450mm long of pressure rating 6 kg/sq cm with PTMT nuts complete all as specified and directed.
S&F health faucet with 1m long flexible pipe with wall hook complete with all fittings complete all as specified and directed.
S&F brass chromium plated shower rose 125mm size complete all as specified and directed.
S & F 15mm dia stop valve fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed
S & F 15mm dia stop valve fancy type, chromiumplated with long shank and cup (concealed type), screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed
S&F sinks with drainage board made of stainless steel 1.0 mm thick(AISI 304) kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm complete all as specified and directed
S & F 15 mm dia bib tap cast copper alloy (fancy type), chromium plated, with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule all as specified and as directed.
S&F CP toilet paper holder complete all as specified and directed.
S&F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.
S&F soap dish brass chromium plated Round/oval shaped fixed to wall with PVC gutty and CP screws complete all as specified and directed
M&L for 75mm dia PVC (SWR) floor trap plain with grating including jointlng with solvant cement complete all as specified and as directed.
S&F 75 mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints, fixed to trenches, floor complete all as specified and directed.
S&F of PVC (SWR) bend with access door any radius suitable for 75mm bore PVC pipe jointed with solvent complete all as specified and directed.
S&F 110mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints, fixed to trenches, floor complete all as specified and directed.
S&F of PVC (SWR) bend with access door any radius suitable for 110mm bore PVC pipe jointed with solvent complete all as specified and directed.
M&L for concrete bed to drain pipe of 150mm bore with PCC (1:3:6) type C2 using 40mm graded stone aggregate including packing under and haunching aginnst the sides of pipe after they are laid jointed and tested complete all as specified and as directed.
S&F 150mm bore Salt glazed stoneware drain pipes, grade “A’ complete all as specified and directed.
M&L for providing precast RCC 1:2:4 type B-1 using 20mm graded stone aggregate as in cover slabs etc and the like including necessary formwork complete all as specified and directed. (Note :- Reinforcements shall be measured and paid separately)
M&L point wiring complete for one light,fan& belt point controlled by one, one way switch with FRLS PVC insulated unsheathed multistranded copper conductor,conforming to IS-694 of size 1.50 sqmm nominal cross sectional area single core drawn in and including 20/25mm size 'heavy grade' PVC doubled lock Casing-Capping and fittings, including, pressed steel concealed terminal switch boxes not less than 1.2mm thick of reqd size factory made duly painted inside and outside with two coats of black bituminous paint over one coat red oxide primer, 3mm thick plastic laminated sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers complete including 1.50 sqmm nominal cross sectional area PVC insulated unsheathed multistranded copper conductor green as earth wire connected to earth dolly with all accessories complete all as specified and directed.
All as per item No 97 here in above but One 3pin socket outlet point on independent board .
All as per item No 97 here in above but One 3pin socket outlet point on same board .
All as per item No 97 here in above but One 3 pin 15 Amp socket outlet point controlled by one switch using 4.0 sqmm copper conductor cable with continuous earth wire of 4.0 sqmm copper conductor on independent board.
Supply & fixing ISI marked switch piano flush button type, single pole, one way, 6 Amps, 240 volts for point wiring complete all as specified and directed .
S&F socket out let 2 in 1, multipurpose suitable for 2 pin and 3 pin 6 amp flush type complete all as specified & directed.
S&F socket out let multipurpose type, 2 in 1 for 6 pin 6 and 16 amp flush type complete all as specified & directed.
Supply & fixing ISI marked switch piano flush button type, single pole, one way, 15/16 Amps, 240 volts for point wiring complete all as specified and directed .
Supply & fixing ISI marked Bell push piano flush button type, single pole, one way, 6 Amps, 240 volts for point wiring complete all as specified and directed .
Supply & fixing ceiling rose 3 pin/PVC/ polycarbonate, isolated body with colour ring 65x50mm, three terminal for point wiring all as specified and directed .
Supply & fixing ISI marked Ding dong type door bell, suitable for 230 V AC,240 volts for point wiring complete all as specified and directed .
S&F fan regulator, 5 step(rotary stepped), electronic type, single phase,120/180 V, 400 watt, socket size incl connection complete complete all as specified & directed.
Supply and Fixing MCB DB double door, powder coated sheet metal enclosure, 4 way 240 volts grade tripple pole and neutral with 200 amps rated bus bar,IP 43 protection fixed to wall using nuts & bolts and washer of suitable dia and grouted to wall using suitable gutties complete all as specified and as directed.
Supply and Fixing MCB DB double door, powder coated sheet metal enclosure, 4 way 240 volts grade single pole and neutral with 200 amps rated bus bar,IP 43 protection fixed to wall using nuts & bolts and washer of suitable dia and grouted to wall using suitable gutties complete all as specified and as directed.
S&F MCB single pole & neutral 32 amps, 240 volts, 'C' series, 10 KA breaking capacity & making connection complete all as specified and directed.
S&F MCB single pole, 6 to 32 amps rating, 240 volts, 'C' series, 10 KA breaking capacity & making connection complete all as specified and directed.
S&F MCB tripple pole & neutral 32 amps, 240 volts, 'C' series, 10 KA breaking capacity & making connection complete all as specified and directed.
M &L for Earthing complete with GI earth plate electrode 600x600x6mm thick buried directly in ground (Earth pit not less than 2.25M deep below normal ground level) with top edge of the plate not less than 1.5m below normal GL. Connected to galvanized earth lead wire 4mm dia by means of nut, bolt, check nut and washers including necessary excavation and earth work in soft/loose soil, GI protection pipe light grade 15mm bore for protecting the GI wire mesh funnel alternate layer of charcoal dust, and salt PCC pit 1:3:6 type C1 using 20mm graded stone aggregate and 50mm thick RCC 1:2:4 type BO using 20mm graded stone aggregate cover re-inforced with 8 mm dia MS TMT bars 80mm C/C both ways complete all as specified and shown in Electrical plate No.3 SSR part-1 and connected to the earth point and testing complete all as specified and directed.
S&F ceiling fan 1200mm sweep 240 volt 5 star rated including provision of three core PVC cable of copper conductor of size 23/.0076 and making connection complete all as specified and directed.
S&F 250mm sweep single phase PVC heavy duty exhaust fan with all accesories including louvers with provisioning rag bolts,nuts. Washers making good the disturbed surface and writing MES No with white colour paint including testing complete all as specified and directed .
Supply and fix exhaust fan, Steel body AC single phase 230V, 50Hz, copper wound double ball bearing of size 300mm sweep with blades grame and louvers complete all as specified & directed.
S&F ultra bright LED polycarbonate tubelight 18Watt with high efficiency suited for installation in T-8 fitting with G13 lamp holders complete all as specified and as directed.
S&F 10 watt LED Bulkhead light fittings complete with aluminium Alloy grey powder coated housing, Heat resistant prismatic Glass cover with EPDM rubber linning,constant current electronc driver all accessories including provision of three core PVC cable of copper conductor of size 23/.0076 and making connection complete all as specified and directed.
Supply & fixing lamp holder,insulated polycarbonate/bakelite body suitable forbatten / angle fitting complete all as specified and directed .
Supply & fix electric water heater, storage stype steel body with copper inner tank and heating element upto 2 KW capacity 15 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc complete all as specified and directed.
M & L Sub main wiring with two single core cable PVC insulated cable with 4.0 Sqmm (Nominal area) multi stranded copper conductor FRLS cable 1100 volts gde including earth continuity conductor using PVC insulated cable of stranded copper conductor of size 4.0 Sqmm connected to common earth dolly and drawing into rigid PVC conduits of 25 mm dia heavy grade complete all as specified and directed. (Note : Two run of sub main wiring cable alongwith one run of earth wire and one run of conduit pipe shall be measured as one length. ).
S&F Galvanised iron tube, medium grade, with all fittings and laid in trenches,floor,road,path complete all as specified and directed for 25 mm bore pipe, complete all as specified and as directed.
S&F Galvanised iron tube, medium grade, with all fittings and laid in trenches ,floor,road,path complete all as specified and directed for 50 mm bore pipe, complete all as specified and as directed.
S&F gun metal gate valve with iron wheel head ,screwed both ends for iron pipe and fixed 50 mm bore complete all as specified and directed.
S&F gun metal gate valve with iron wheel head ,screwed both ends for iron pipe and fixed 25 mm bore complete all as specified and directed.
Drilling and tapping cast iron water mains (in position) for branch connections of the 50mm internal dia all as specified and directed.
S&F straight plain brass ferrules (or connecting screws) screwed both ends and fixed all as specified and directed.
Construction of brick masonary valve pit of size 45x45x60 cm depth (Internal dimension) with one brick thick wall in CM (1:4) on 100 mm thick PCC (1:4:8) type D2 (using 40 mm graded stone aggregate) as in foundation lean concrete PCC (1:3:6) type C1 (using 20 mm graded stone aggs) as in bedding and coping and 10 mm thick cement plaster in CM (1:4) internally and externally up to 15 cm below ground level providing valve pit cover made of 3 mm thick MS sheet welded with 40 x 40 x 6 mm angle iron frame all round the top fixed by means of 4 Nos hold fast 150 mm long made out of flat iron 40 x 60 mm embeded in PCC block (1:2:4) type B1 (20 mm graded crushed stone aggs)of size 230 x 200 x 100 mm including provision of hinges, welded with angle iron frame and MS cover, MS handle of suitable length, and size welded with MS cover and suitable locking arrangement with applying two coat of synthetic enamel paint over one coat of red oxide, zinc crome primer and necessary excavation and earth work in soft/ loose soil, complete all as specified and as directed.
M & L for sand cushioning with dry clean Sand to underground cable 23cm thick (8 cm thick before laying and 15 cm thick after laying the cable) punned to 18cm all as specified and directed. (Note-Punned thickneess shall be measured and paid.)
Supply and laying sub class 'B' bricks laid dry and flat across the length of cable for protection of cable complete all as specified and directed.
M&L for GI tubing 50 mm bore, light grade with all necessary fittings laid in trenches/under road crossing/fixed on pole/wall/under floor including 25 x 3mm mild steel FI clamps of required size complete all as specified & directed.
Supply, laying, jointing & testing, cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 Sqmm 3.5 core complete all as specifed and directed.
SHRI D. C. BISWAS
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .