PROVN OF CABLE TRUNKING SYSTEM, ADDN/ALTN TO INTERNAL WIRING,REPLACEMENT OF CANOPY FOR DG SET AT CGDHQ-15 OKHA, PROVN OF POST TOP LANTERN AROUND CERTAIN PLACES AT ICGS OKHA UNDER GE I CG PORBANDAR

Amount

SCHEDULE 'A'

Excavation in trenches not exc 1.5 m wide and not exc 1.5m in depth and getting out in Soft/ Loose soil complete all as specified and directed

Returning filling in incl spreading levelling watering and well Ramming in layers not exc 25 cm thick complete all as specified and directed

Removing excavated material not exc 50 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc Note: Cost of Making Good of existing disturbed surface deemed to be included in unit rate.

M&L Point wiring complete with 1.5 Sqmm single core PVC Insulated but unsheathed multistranded copper conductor FRLS cable 650/1100 Volt grade down through and including non metallic rigid PVC heavy duty concealed conduit, min 20mm external dia,, but shall be increased to suitable size, as per requirement in accordance with clause 19.125 of SSR Part I, ISI marked, including conduit accessories like bends,tees,junction box etc fixed concealed/recessed in wall or ceiling etc including 1.5 Sqmm earth wire, single core PVC insulated but unsheathed multistranded copper conductor FRLS cable as earth continuity wire including Modular metal flush box of suitable size Note: Cost of cutting / chasing on wall and making good after repair shall be deemed to be included in quoted rate . Make of cable: Havells/ Finolex/ RR Kable/ KEI (a) One light point /fan point controlled by one switchOne light point or one fan point controlled by one switch with cables 1.5 sq mm size

(b) One 3 pin 6 Amps switch socket outlet 5 Amps on independent board

(iii) One 3 pin socket outlet 6 amps on the same board with other switches

(iv) One light point controlled by two switches

M&L Point wiring complete with 2.5 sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLS cable 1100 Volts grade drawn through and including PVC heavy duty concealed conduit (minimum 20 mm dia external) but shall be increased as per actual site requirement in accordance with clause 19.125 of SSR part- I ISI marked including conduit accessories like bends, tees, junction boxes etc fixed concealed/ recessed in wall or ceiling etc including 2.5 sqmm PVC insulated but unsheathed multistranded copper conductor FRLS cable as earth continuity wire including sunken type pressed steel terminal boxes of suitable size with 2.8mm thick bakelite sheet white/coloured top cover for mounting of modular switches, sockets and fan regulators complete all as specified and as directed by Engineer-in-Charge. for the following:- Note: Cost of cutting / chasing on wall and making good after repair shall be deemed to be included in quoted rate . Make of cable: Havells/ Finolex/ RR Kable/ KEI (a) one light point controlled by one one way 15A SP switch

S & F Modular type 6 A one-way switch, 1 module Make :- Legrand (Arteor)/ Schneider (Zencelo)/ Hager (Berker)

S & F Modular type 16 A one-way switch, 1 module Make :- Legrand (Arteor)/ Schneider (Zencelo)/ Hager (Berker)

S&F Modular socket, 6 Amps, 2/3 pin combind 2 module complete all as specified and as directed. Make :- Legrand (Arteor)/ Schneider (Zencelo)/ Hager (Berker)

S&F Modular socket, 6/16 Amps, 2/3 pin combind 2 module complete all as specified and as directed. Make :- Legrand (Arteor)/ Schneider (Zencelo)/ Hager (Berker)

S&F Modular fan regulator, 120 watt, 2 moduler complete all as specified and as directed. Make :- Legrand (Arteor)/ Schneider (Zencelo)/ Hager (Berker)

M & L Ceiling rose, surface bakelite, 65x17 mm three terminals complete all as specified and directed. Make :- Legrand (Arteor)/ Schneider (Zencelo)/ Hager (Berker)

S & F Modular type bell switch 6 A one-way switch, 1 module Make :- Legrand (Arteor)/ Schneider (Zencelo)/ Hager (Berker)

S & F Modular type switch 6 A two way switch, 1 module Make :- Crabtree(Athena) / Anchor (vision) / Havell's (Oro)

S & F Bell multi music type complete all as specified and as directed Make :- Legrand (Arteor)/ Schneider (Zencelo)/ Hager (Berker)

S&F in repair 20W surface/Wall mounted LED Luminaire , with high efficiency long life LED chips, CRI=80(Minimum) PF>.95, System luminous efficacy >100, Operating voltage 140V-270V including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to LED fitting Complete all as spd and as directed by engineer-in-charge. Make: Bajaj Cat No BLTRU 20W WH VIVA/ Philips Cat No BN 308C-LED-2220S-6500/ Osram cat No Luxpower Batten 19WL840.

S&F in repair surface mounted slim round downlighter fitting 12 Watt , with driver complete all as specified and directed including connecting cable from ceiling rose to terminal block of luminaire all as specified . Make : Wipro (IRIS)/ Philips/HPL (Jonex Plus)

S&F in replacement MCB Distribution box,8way for MCB SPN, 415 Volts, double door powder coated sheet metal enclosure confirming to IP 43 including standard bus bar fixed on existing bricks/stone wall in semi-concealed type complete all as all as specified and as directed by Engineer-in-charge. Make- Legrand/Schneider/Hager/ L&T

M&L MCB SPN 240 volt C curve 10 KA,ISI marked as per IS/IEC 60898-1 2002 of 63 Amps capacity IP 20 complete all as specified and directed Make Legrand/Hager/L&T/Schneider

M&L MCB SP 240 volt C curve 10 KA,ISI marked as per IS/IEC 60898-1 2002 of 6/32 Amps capacity IP 20 complete all as specified and directed Make Legrand/Hager/L&T/Schneider

M&L Sub main wiring with two runs of 2.5 sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLS 1100 Volts grade cable fire retardant low smoke drawn through and including PVC concealed conduit heavy duty grade ISI marked 25mm dia (external) including conduit accessories like bends, tees, junction boxes etc including 2.5 sqmm PVC insulated but unsheathed multistranded copper conductor FRLS cable as earth continuity wire fixed complete all as specified and directed. Note: Cost of cutting / chasing on wall and making good after repair shall be deemed to be included in quoted rate . Make of cable: Havells/ Finolex/ RR Kable/ KEI

M&L Sub main wiring with two runs of 4.0 sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLS 1100 Volts grade cable fire retardant low smoke drawn through and including PVC concealed conduit heavy duty grade ISI marked 25mm dia (external) including conduit accessories like bends, tees, junction boxes etc including 4.0 sqmm PVC insulated but unsheathed multistranded copper conductor FRLS cable as earth continuity wire fixed complete all as specified and directed. Note: Cost of cutting / chasing on wall and making good after repair shall be deemed to be included in quoted rate . Make of cable: Havells/ Finolex/ RR Kable/ KEI

Taking down existing sub main wiring complete, including fixture and fittings removing materials to store for keeping in safe custody or for taking on credit and making good disturbed surfaces of walls, floors, etc Note: Cost of Making Good of existing disturbed surface deemed to be included in unit rate.

Taking down Ceiling fans complete servicing, and replacement of worn out minor parts and hanging of ceiling fan/fixing or exhaust fan including painting with synthetic enamel paint by spray M/achine (with cumulative cost of spares not exceeding Rs.50 per Each fan) including filling cavities with filler in situ all as specified and directed.

Supply and Fix Hot dip Galvanised HDG PERFORATED CABLE TRAY 300 X 75 X 2 MM, LENGTH - 2.5 MTR (INCLUDING COUPLER PLATE AND ELECTROPLATED FASTENRS) all as specified and directed.

Supply and Fix Hot Dip Galvanised Tubalar Pole OD - 48 MM , THICK - 2.5 MM LENGTH - 1.5 MTR TOP BRACKET - 50 X50X 3.0 MM (L-350MM) Base Plate- 100 X100X 3 MM including reinforced cement concrete foundation (RCC foundation 1:2:4 using 20 mm graded stone aggregate) complete all as specified and directed

Taking out UNSV LT UG cables of any size from trenches all as specified and directed. Note: Excavation and earth work shall be measured and paid directly

Laying only XLPE LT Cable of any sizes on Cable tray system.

Supply and lay 63 mm outer dia double wall corrugated (DWC) high density polythene pipes having corrugation on the outer wall and plain surface on the inner wall confirming to IS 16205 & IS14930 ( Part I and II) for protection of underground cables with all fittings. laid in trenches / road/ nallah or fixed along wall. poles or laid under floor (including cutting floor/Road and making good to match with existing adjoining surface etc for cable protection all as specified (excavation and earth work shall be measured and paid separately) Make: Rex/Poly/Gemini

Supply and installation of sound proof canopy for 125 KVA DG Set with16/18 swg MS CRC RUST PROOF SHEET,powder coating, with sound proof high quality material PU Foam 40 mm , High Quality sealing material, complete locking system and heay duty hinges provided on doors, Enclosure is capable to reduce sound level 25 dBA, as per CPCB norms with natural/forced ventillation system all as specified and directed. Note: The canopy shall be assembled by the authorized service dealers of like make KIRLOSKAR,KOEL,CUMMINS,SUDHIR

Supply and installation of sound proof canopy for 30 KVA DG Set with16/18 swg MS CRC RUST PROOF SHEET,powder coating, with sound proof high quality material PU Foam 40 mm , High Quality sealing material, complete locking system and heay duty hinges provided on doors, Enclosure is capable to reduce sound level 25 dBA, as per CPCB norms with natural/forced ventillation system all as specified and directed. Note: The canopy shall be assembled by the authorized service dealers of like make KIRLOSKAR,KOEL,CUMMINS,SUDHIR

M&L Earthing complete with copper earth plate electrode including necessary excavation and earth work in any type of soil with copper earth plate electrode size 60 cm x 60 cm x 3.15 mm thick buried directly in ground (earth pit not less than 2.25 mtrs below ground level) with top edge of the earth plate not less than 1.5 mtr below normal ground level connected to copper earth strip 20x3 mm as earthing lead by means of bolts nuts check nuts and washers of galvanized iron or steel all as shown in electrical plate No.3 of MES SSR Part-1 connected to main switch board or main control board all as specified and testing on completion including provision of earth strip protected by galvanized iron 40 mm dia. light grade pipe and watering pipe shall be 20 mm bore medium grade PCC pit with pre cast RCC cover, charcoal/salt funnel etc. complete all as directed. NOTE : (1) The concrete pit shall be PCC 1:3:6 tye C -1 40 mm thick pre cast cover slab of RCC (1:2:4) type B-1 using 20 mm graded stone aggregate reinforced with 8 mm TMT bars @10 cm C/C on both sides with suitable cast iron handle shall be provided in liew of cast iron cover shown in electrical plate No.3 of MES SSR Part-1 (ii) Item includes the cost of 7.5 m GI pipe for protection of earth strip

Supply and Fix in replacement Lead acid battery 12 V 180 AH Class B with battery terminal for 125 KVA DG Set. Make: Exide XPRESS BATTERY (FXPO-XP1800) / Amaron

Supply and Fix in replacement Lead acid battery 12 V 80 AH Class B with battery terminal for 30 KVA DG Set. Make: Exide (INVAPLUS Tabular) /Amaron

Supply and Fix in replacement 4 Pole MCCB 250 Amp, 50 Hz, 415 V, C series with rupturing capacity 36 KA. Make: Legrand/Schenieder/L&T

Supply and Fix in replacement 4 Pole MCCB 63/100 Amp, 50 Hz, 415 V C series with rupturing capacity 16 KA. Make: Legrand/Schenieder/L&T

Supply and fix ON LOAD change over switch 415V in sheet metal enclosures 4 pole of capacity 125 Amps. Make: Legrand/Schenieder/L&T

Supply, laying, Jointing and testing 50 Sq mm 3.5 core XLPE insulated, Extruded PVC outer sheath and inner sheath, galvanised steel armoured cable with aluminium conductor suitable for rated voltage of 1100 Volts grade and laid in trenches/pipe / ducts or on pole complete all as specified and directed Make: Havells/RR Cables/Polycab

Supply and fix Synthetic Insulation mat of 1 meter x 2 meter x 19 mm all as specified and as directed

Supply only Electric safety rubber hand gloves protection with 11 KV HT all as specified and directed.

S&F LED Post Top lantern of capacity 45 Watt, 240V, Pure polyester UV resistant powder coated die cast aluminium housing with PMMA clear diffuser for uniform illumination with IP 65 protection with Suitable connector shall be provided for LED connection between driver output and LED and Extruded silicon loop gasket shall beprovided in the lantern body to ensure weather proof seal between the UV Glasscover and the metal housing to exclude the entry of the dust, water, insects etc.including Stainless steel stand of suiatable size fixed on existing wall including make good of surface all as specifed and directed. Make: Wipro(LP07-501-XXX-57-CL)/Philips(BGP161 LED2500/NW PSU 220-240V 7043 IN) /equivalent in Bajaj Note: The Contractor should submit LM 79 & LM 80 certificates for the batch of fittings procured before incorporating fittings in the work.

S&F LED Bollard light Cool white 6500 K of wattage 10/11 watt with integrated mounting base plate and driver,540mm long complete with extruded aluminium housing dark grey RAL 7043 with long life time of 50,000 hours (70% lumen maintenance @ Tc = 35ºC), IP65 protection and IK10 impact resistance including PCC (1:2:4) foundation of suitable size for mounting of light fitting including mounting pole with accessories not less than 1.2m height complete all as specified and directed. Make: Crompton (LBLSN-10-CDL)/ Wipro (LB14-131-XXX-65-05) / Philips(BCP150 LED150/WW PSU 220-240V 7043) Note: The Contractor should submit LM 79 & LM 80 certificates for the batch of fittings procured before incorporating fittings in the work.

Supply, laying, Jointing and testing 10 Sq mm 2 core XLPE insulated, Extruded PVC outer sheath and inner sheath, galvanised steel armoured cable with aluminium conductor suitable for rated voltage of 1100 Volts grade and laid in trenches/pipe / ducts or on pole complete all as specified and directed Make: Havells/RR Cables/Polycab

Supply, laying, Jointing and testing 16 Sq mm 4 core XLPE insulated, Extruded PVC outer sheath and inner sheath, galvanised steel armoured cable with aluminium conductor suitable for rated voltage of 1100 Volts grade and laid in trenches/pipe / ducts or on pole complete all as specified and directed Make: Havells/RR Cables/Polycab

Supply and lay 50 mm outer dia double wall corrugated (DWC) high density polythene pipes having corrugation on the outer wall and plain surface on the inner wall confirming to IS 16205 & IS14930 ( Part I and II) for protection of underground cables with all fittings. laid in trenches / road/ nallah or fixed along wall. poles or laid under floor (including cutting floor/Road and making good to match with existing adjoining surface etc for cable protection all as specified (excavation and earth work shall be measured and paid separately) Make: Rex/Poly/Geminii

Supply and Fix Thermoplastic Junction Box of Landscape Light Fittings of size 155x210x92 -with Terminals and lugs for cable size 10/16 Sqmm x 4 Sqmm with necessaries fittings confirming to IP 66 Protection with metric knock out for cable entry all as specified and as directed by Engineer-In-charge NOTE :- MCB's shall be measured and paid separately under respective items of this schedule herein after. Make :- Hensel/ Neptune/ Rittal/ Hager

M&L MCB SP 240 volt C curve 10 KA,ISI marked as per IS/IEC 60898-1 2002 of 6/16 Amps capacity IP 20 complete all as specified and directed Make Legrand/Hager/L&T/Schneider

MADHAV ENTERPRISE

Chamunda Kruparefrigeration

Hirachand Sunderji and co

K K Construction Co

KRISHNA ENGINEERING

OM ENGINEERING

JAMNAGAR ELECTRIC AND MACHINERY CO