Construction of B. Pharmacy Govt. College at Nagrota Bagwan in Distt Kangra (HP) (Deposit work)

Amount

Excavation in foundation, trenches etcetera. in earth work in all classification of soil such as pick work, jumper work, pick jumper work, blasting work, jumper blasting work, soft and hard blasting and saturated soil, de-watering, including wedging out rocks where blasting work is prohibited, chiseling or any other mixed variety of soil, shoring, strutting or bailing out water (Surface and sub soil water) upto any depth or height any quantum of water including de-watering removal of slush, lift upto any height, stacking the excavated soil clear from the edge of excavation and then retuning the stacked soil in 15cm (Fifteen centimetre)layers, when required into plinths, sides of foundation etcetera; consolidating each deposited layer by ramming, watering and then disposing of all excavated earth as directed by the Engineer-in-charge, within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Excavation in earth work and filling in 15 cm (Fifteen Centimetres) layers in foundation and plinths including ramming, watering and consolidating upto all leads, lifts and in all classification of soil as directed by the Engineer-Incharge, including entire carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Excavation in drains and channels etcetera; in earth work in all kind of soil, such as pick work, jumper work, pick jumper work, blasting work, (hard and soft) and work doing in saturated soil including chiseling or wedging out rocks where blasting work is prohibited including shoring, strutting and pumping or bailing out water (Surface and sub soil water) upto any depth or any height, any quantum of water including slush which may arrise during dewatering, any other mixed variety of soil, lift upto any height, stacking the excavated soil for all heights clear from the edge of excavation and then returning the stacked soil in 15cm (Fifteen centimetre) layers when required into plinths, sides of foundations etcetera; consolidating each deposited layer by ramming, watering and then disposing of all surplus excavated earth as per specifications, approved drawing, design, and as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Cutting in earth work in all classification of soil such as pick work, jumper work , pick jumper work, blasting work, (soft and hard) and conglomerated strata including chiseling and chiseling or wedging out rocks work in saturated soil etcetera for all heights and depths in proper slops as per classification of soil so as to make for site development as required at site and in required gradient and camber including filling for leveling the ground including stacking of serviceable material and disposal of all surplus materials at approved dumping site through all modes of transportation including head load or animal transport or mechanical means along with its leveling , fine dressing etcetera and safety measure and other incidentals necessary to complete and as per the direction of Engineer-Incharge, including entire carriage of materials within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Sand filling under floor including watering, ramming, consolidating and dressing complete as per specification and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimetre) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetre), so as to give a fair finish including centring, shuttering, strutting and propping etcetera, with wooden battens and ballies for all heights/depth of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in Foundation, footings, bases of columns and mass concrete including carriae of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design, entire satisfaction and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimetre) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetre), so as to give a fair finish including centring, shuttering, strutting and propping etcetera, with wooden battens and ballies for all heights/depth of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended floors ,roofs, landings including curved surfaces where ever required as per Architectural drawing, design and specifications and the like floor etcetera including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimetre) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetre), so as to give a fair finish including centring, shuttering, strutting and propping etcetera; with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in beams, cantilevers, girders, lintels, where ever required, sides and soffits of beams haunchings, cantilevers, bressumers and lintels upto all depths including carriae of material within all leads, lifts and other incidentals as per specifications, approved drawing, design, entire satisfaction and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimetre) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetre), so as to give a fair finish including centring, shuttering, strutting and propping etcetera, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in columns, pillar, posts and struts square rectangular or polygonal in plan etcetera; including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design, and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal fifteen millimetre) thick, welded with angle iron in frames of 30x30x5mm(Thirty into Thirty into Five millimetre), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights and removal of the same for in-situ reinforced plain concrete work in stairs cases with slopping or stepped soffits, excluding, landing, including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal fifteen millimetre) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetre), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights and removal of the same for in-situ reinforced plain concrete work in edges of slab and breaks in floors and walls under any thickness including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal fifteen millimetre) thick, welded with angle iron in frames of 30x30x5mm(Thirty into Thirty into Five millimetre), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights and removal of the same for in-situ reinforced concrete and plain concrete work in vertical surface such as walls (any thickness) partitions and the like including attached, pilasters, buttresses, plinth and string courses including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying cement concrete 1:4:8 (One cement; four sand; eight graded crushed stone aggregate 40mm (Forty millimetre) nominal size mechanically mixed and curing complete excluding cost of form work in foundation and plinth including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 (M- twenty) design mix to obtain the minimum compressive strength of 20 N/mm2 (Twenty Newton per square millimetre) with cement contents not less than 330 kg (Three hundred thirty kilogram) per cubic meter as per approval design mix mechanically mixed and vibrated including curing complete, excluding the cost of form work and reinforcement for reinforced concrete work in foundation, footings, bases of columns and the like mass concrete as per specifications, approved drawing, design and as per the entire satisfaction and direction of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 (M-Twenty) design mix to obtain the minimum compressive strength of 20N/mm2 (Twenty Newton per square millimetre) with cement contents not less than 320 kg (Three hundred twenty kilogram) per cubic metre, mechanically mixed and vibrated including curing complete, excluding cost of form work and reinforcement for reinforced concrete work in suspended floors, roofs, landings, shelves and their supports balconies, beams, girder, bressumers and cantilevers in all depths/height upto all floor levels as per specifications approved drawing, design as per entire satisfaction and direction of Engineer-Incharge including carrige of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Stone filling in plinth with hard stone of approved quality under floor including watering, ramming, consolidating and dressing complete and carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 (M-Twenty) design mix to obtain the minimum compressive strength of 20N/mm2 (Twenty Newton per square millimetre) with cement contents not less than 320 Kgs (Three hundred twenty kilograms) per cubic meter mechanically mixed and vibrated including curing complete, excluding cost of form work and reinforcement for reinforced concrete work in columns, pillars, posts and struts in all depth/height for all floors height as per specifications, approved drawing, design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 (M- twenty) design mix to obtain the minimum compressive strength of 20N/mm2 (Twenty Newton per square millimetres) with cement contents not less than 320 Kgs (Three hundred twenty kilograms) per cubic metre mechanically mixed and vibrated including curing complete, excluding cost of form work and reinforcement for reinforced concrete work in Stair cases (except spiral stair cases) excluding landings, but including preparing of top surfaces and finishing of nosing upto all floor levels as per specifications, approved drawing, design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying cement concrete work M-20 (M-twenty) design mix to obtain the minimum compressive strength of 20N/mm2 (Twenty Newton per square millimetres) with cement contents not less than 320 Kgs (Three hundred twenty kilograms) per cubic metre mechanically mixed and vibrated to give smooth and even surfaces including centring, shuttering but excluding reinforcement as in mouldings, cornices, window sills etcetera to any girth, as per specifications, drawing and design complete, as directed by the Engineer-in-charge.upto floor all levels including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying Damp Proof Course 100mm (One Hundred millimetre) thick with cement concrete 1:2:4 (one cement: two sand: four graded crushed stone aggregate) 12.5mm (Twelve decimal five millimetre nominal size) and curing complete, as required at site including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 (M-twenty) design mix to obtain the minimum compressive strength of 20N/mm2 (Twenty Newton per square millimetre) with cement contents not less than 320 Kgs (Three hundred twenty kilograms) per cubic metre, mechanically mixed, vibrated and curing complete for reinforced concrete Chhajjas for all thickness in all floor levels including finishing the exposed surface with cement mortar 1:3 (One cement : Three sand) to give a smooth and even surface including centering/ form work but excluding the cost of reinforcement for reinforced concrete work up to all floor levels up to all height and as per direction of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals and further as per specifications, approved drawing, design. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Applying a coat of hot bitumen mexphalt 80/100 (Eighty/Hundred) /VG-10 (Viscosity grade-Ten) using 1.70 Kgs. (one decimal seven zero Kilogram) per square metre on Damp Proof Course after cleaning the surface with a piece of cloth lightly soaked in kerosene oil, including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing Tor steel reinforcement of TATA Tiscon/Sail/as per approved make for reinforced cement concrete work including bending, binding, cutting, straightening and placing in position complete including cost of binding wires complete upto all floor levels as per specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Random rubble masonry/polygonal rubble masonry (uncoursed/brought to courses) with hard stones of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (One cement : Six sand : Twelve graded crushed stone aggregate 20mm (Twenty milimetre) nominal size at plinth level in cement mortar 1:6 (One cement: Six sand) complete, including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Squared rubble masonry coursed with hard stone of approved quality in foundation and plinth including raking out joints with cement mortar 1:6 (One cement : Six sand) and curing complete including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing angle iron doors frames (Double rebate) manufactured from M.S. angle of TATA/SAIL section of 35x35x5mm(Thirty five into Thirty five in Five milimetre) / 40x40x5mm(Forty into Forty into Five milimetre) and M.S, flat 50x5 (Fifty into five milimetre) as per design and drawing including jambs, lock jambs beeds if required angles threshold of M.S. angle 50x25mm(Fifty into twenty five milimetre) welded or rigidly fixed by mechanical means lugs with split ends tails to each jambs including steel butt hinges 2.5mm(Two decimal five milimetres) thick with a provision of locking arrangements and shock absorbers as specified as per specification & design and applying a coat of approved steel primer after pre-treatment of the surfaces including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing angle iron doors frames (Single rebate) manufactured from M.S. angle of TATA/SAIL section of 35x35x5mm(Thirty five into Thirty five in Five milimetre) / 40x40x5mm(Forty into Forty into Five milimetre) and M.S, flat 50x5 (Fifty into five milimetre) as per design and drawing including jambs, lock jambs beeds if required angles threshold of M.S. angle 50x25mm(Fifty into twenty five milimetres) welded or rigidly fixed by mechanical means lugs with split ends tails to each jambs including steel butt hinges 2.5mm(Two decimal five milimetre) thick with a provision of locking arrangements and shock absorbers as specified as per specification & design and applying a coat of approved steel primer after pre-treatment of the surfaces including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing factory made PVC door frame of Rajshri / Prominance/Supreme single rebate of any colours of size 50x47mm (Fifty into Forty seven milimetre) with a wall thickness of 5mm (Five milimetres) made out of extruded 5mm rigid PVC foam sheet heat bend & mitred at corners and jointed with 2 Nos. (Two Numbers) of 150mm (One hundred fifty milimetre) long brackets of 15x15mm (Fifteen into Fifteen milimetre) M.S. square tube, the vertical door profiles to be reinforced with 19x19mm (Ninteen into Ninteen milimetre) M.S. square tube of 19 (Ninteen) gauge EPDM rubber gasket weather seal to be provided throughout the frame including fixing of door frame to wall with M.S. screws 100mm (One Hundred millimetre) long with wooden or rawl plugs emedded in masonry complete as per manufactures specification including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing to existing door frames, 30mm(Thirty millimetre) thick factory made PVC panelled door shutter Rajshri / Prominance/Supreme consisting of frame made out of M.S. tubes of 19(Nineteen) gauge thickness and size of 19mmx19mm (Nineteen into nineteen millimetre) for styles and 15mmx15mm (Fifteen into Fifteen millimetre) for top & bottom rails, M.S. frame shall have a coat of steel primers of approved make and manufacture M.S. frame overed with 5mm (Five millimetres) thick heat moulded PVC "C" channel of size 30mm (Thirty millimetres) thickness, 70mm (Seventy millimetre)width out of which 50mm(Fifty millimetres)shall be flat and 20mm(Twenty millimetre)shall be tappred in 45 (Forty five) degree angle on either side forming style and 5mm (Five millimetre) thick, 95mm (Ninety five millimetres) wide, PVC sheet out of which 75mm (Seventy five millimetre) shall be flat and 20mm (Twenty millimetres) shall be tapered in 45 (Forty five) degree on the inner side to form top and bottom rail and 115mm (One hundred fifteen millimetres) wide PVC sheet out of which 75mm (Seventy five millimetres) shall be flat and 20mm (Twenty millimetres) shall be tapered on both side to form lock rail, top, bottom and lock rail shall be provided either side of the panel 10mm (Ten millimetres) thick, 20mm (Twenty millimetres) wide cross PVC sheet be provided as gap insert for top rail and bottom rail paneling of 5mm (Five millimetres) thick both side PVC Sheet to be fitted in the M.S. frame welded/sealed to the style & rails, joints mitred and jointed with solvent cement adhesive i/c fixing of PVC shutter with existing frame with M.S. butt hinges 100x50x1.90mm (One hundred into fifty into one decimal ninety millimetres) size with necessary screws etc complete.within all leads, lifts of materials and other incidentals.

Second class brick masonry using common burnt clay building bricks in super-structure upto all floor level in cement mortar 1:6 (One cement: Six sand) and curing complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Second class half brick masonry using common brunt clay building bricks in super-structure upto all floor level in cement mortar 1:4 (1 cement :4 sand) with hoop iron and curing complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 40 mm (Forty milimetres) thick Second Class deodar wood panelled glazed or panelled and glazed shutters for doors windows and clerestory windows including 5mm (Five millimetres) glass panes of Modoguard /Saint Gobin/Silverfish black enamelled iron butt hinges with necessary screws complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 40mm (Forty millimetre) thick second class deodar wood panelled glazed or panelled and glazed shutters for doors, windows and clearstory windows including black enamelled iron butt hinges with necessary screws as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 19mm (Nineteen millimetres) thick water proof termite resistant commercial board of Kit ply /Centuary ply/Duraply/Marino ply (ISI marked) IS : No. 1659 for shutter of cup board box including shelves and shutter. The back side of the cup board/cabinets shall have 6mm (Six millimetre) thick water proof ply and all cut portions of the board shall have 6/12mm (six/twelve five millimetre) thick hard wood edging to be finished with 1mm (One millimetre) thick lamination of century/ greenlam/ Tera of approved shade fixing with nickel plated piano hinges with necessary screws upto all floor levels complete including carriage of material within all leads, lifts and other incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 40mm (Forty millimetre) thick second class deodar wood wire gauge shutters using galvanised M.S. wire guage of I.S. Guage designation 85-G with wire of dia 0.56 mm (Zero point five six millimetre) for doors, windows and clearstorey windows including bright finished black enamelled iron hinges with necessary screws upto all floor level complete as per specifications, approved drawing, design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Supplying and fixing plain glass 4mm (Four millimetre) thick frosted glass panes of Modi Gaurd/Saint Gobin/Silverfish with putty and nails and as per detail and HP PWD specifications including entire carriage of materials within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying cement concrete 1:5:10 (1cement : 5 sand; 10 graded crushed stone aggregate 40mm(Forty millimetres) nominal size) mechanically mixed vibrated and curing complete excluding cost of form work in Foundation and plinth complete including carriage of material within all leads, lifts and other incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 19mm (Nineteen milimetres) thick water proof commercial board Centuary/ Alpro or equivalant in SDB/MDB shutter with 6mm hard wood edging and 0.63mm (Zero point sixty three) thick P.G.I. lining of the of shutter inner side of the shutter including fixing with nickel plated piano hinges with screws etcetera complete as per specifications, approved drawing, design and as per the entire satisfaction and direction of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing cup-board shutter magnetic catcher with necessary screws etcetera upto all floor levels complete including carriage of material within all leads, lifts and other incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 65x35mm (Sixty five into Thirty five milimetres) size special quality chromium plated brass cup board lock with six leavers including necessary screws etcetera complete (Indian make) including carriage of material within all leads, lifts and other incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 25mm (Twenty five milimetres) dia stainless steel curtain rod having wall thickness of 1.25mm (One point Two Five millimetres) with the chromium plated brass brackets fixed with C.P. brass screws etcetera where ever required for pelmet with necessary fittings complete including entire carriage of material within all leads, lifts and other incidentals,as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing M.S. (mild steel) grill of required pattern in M.S. (mild steel) frames of windows etc with M. S flat 20x5mm (Twenty into Five milimetres), square bars in combination as per detail with round headed bolts and nuts or by screws complete including entire carriage of material within all leads, lifts and other incidentals,as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 12mm (Twelve milimetres) thick both sides water proof particle preliminated board BWP phenol bonded exterior/interior grade both sides of Kitply/Action/ TESA/Green ply in fill panels of approved quality with butt jointing and nail (frame work and cover fillets to be paid for separately complete including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partition etc with PVC/neoprens gasket etc. complete as per the architectural drawings and the directions of Engineer-In-charge (cost of aluminium snap beading shall be paid in basic item.) Glazing (Modi Gaurd/Saint Gobin) with glass panes of 6.00mm(Six point zer zero millimetre) thickness (weight not less than 13.75 kg/sqm (Thirteen point seventy five kilgrams per square metre) as per architectural drawings, specifications, design and as per the directions of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 300x16mm (Three hundred into Sixteen milimetre) size aluminium Pilot/sheel sliding door bolts anodized transparent or dyed to required colour and shade with necessary screws etcetera including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing M.S. Tower bolts (Barrel type) dyed to required colour and shade with necessary screws etcetera complete including carriage of material within all leads, lifts and other. incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

200x10mm (Two hundred into Ten millimetres) nominal size

150x10mm (One hundred fifty into Ten millimetres) nominal size

Providing and fixing M.S. handles dyed to required colour and shade with necessary screws etcetera complete including carriage of material within all leads, lifts and other. incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

125mm (One hundred twenty five millimetre) nominal size

100mm (One hundred millimetre) nominal size

75mm (Seventy five millimetre) nominal size

Providing and fixing M.S. (mild steel) hooks and eyes of 250mm (Two hundred fifty millimetre) size of approved quality to required colour and shade with necessary screws etcetera; complete including carriage of material within all leads, lifts and other. incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing aluminium Tower bolts (Barrel type) anodised transparent or dyed to required colour and shade with nuts and screws etcetera. complete, including carriage of material within all leads, lifts and other incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

200x10mm (Two hundred into Ten millimetre) nominal size

150x10mm (One hundred fifty into Ten millimetre) nominal size

Providing and fixing 250mm (Two hundred fifty milimetre) size of aluminium anodised bright finished hard drwan hooks and eyes to required colour and shade with necessary screws etcetera; complete within all leads, lifts of materials and other incidentals and as approved drawing, design and as directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing aluminium handles of anodised transparent or dyed to required colour and shade with necessary screws etcetera complete including carriage of material within all leads, lifts and other. incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

125mm (One hundred twenty five millimetre) nominal size

100mm (One hundred millimetre) nominal size

75mm (Seventy five millimetre) nominal size

Providing and fixing 100mm (One hundred milimetres) bright finished Aluminium floor door stopper with rubber cushion screws etc. to suit shutter thickness complete including carriage of material within all leads, lifts and other. incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing hydraulic door closer single acting including necessary screws fitting complete including carriage of material within all leads, lifts and other. incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying 25mm (Twenty five millimetres) thick Kota Stone flooring (Mirror polished) of 55x55cms (Fifty five into fifty five centimetres) size of approved shade laid over base of cement mortar 1:4(One cement: Four sand) and jointed with Grey cement slurry mixed with pigment to match the shade of the slab in treads steps and landing including rubbing and polishing/moulding single or double, nosing complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing heavy duty double charged vetrified tiles of Nitco/Johnson/Orient/Bell 600x600mm (Six hundred into Six hundred millimetres) manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm (Twelve millimetres) thick cement mortar 1:3 (One cement : Three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying 25mm (Twenty five millimetre) thick polished kota stone slab skirting (mirror polished) in dado and pillars laid on a bed of 12mm (Twelve millimetre) (Average) thickness cement mortar 1:3 (One cement : Three sand) and jointed with Grey cement slurry mixed with pigment to match the shade of the slabs including rubbing, nosing and polishing, moulding complete including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying 40mm (Forty millimetre) thick cement concrete flooring of cement concrete 1:2:4 (One cement : Two sand: Four graded crushed stone aggregate 20mm (twenty millimetres) nominal size laid in one layer finished with floating coat of neat cement upto all floor level including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing Fly proof wire mesh shutters using galvanized S.S. (Stainless steel) wire gauge of I.S. gauge designation 85G ( Eighty five G) with wire of 0.56 mm ( Zero decimal five six millimetre) dia and 1.4mm (One point four millimetre) appear on both side for doors, windows and clearstory windows including entire carriage of material within all leads, lifts and other incidentals. as per approved specifications, drawing, design and as directed by the Engineer-In-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 8mm (Eight milimetres) solid thick aluminium grills of required pattern in steel frames of windows etctera square or round bars in combination as per detail with round headed bolts and nuts or by screws complete including entire carriage of materials within all leads, lifts and other incidentals,as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 300x600mm (Three hundred into Six hundred fifty millimetre) ceramic glazed tiles of Kajaria/Swastik/ Nitco/Orient/Somany/ Bell/ Johnson in skirting and dado upto all heights with 12mm (Twelve milimetres) thick cement mortar 1:3(One cement :Three sand) jointing with cement slurry complete including carriage of material within all leads, lifts and other. incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying double charged vetrified tiles of Nitco/Kajaria/Orient-Bell/Johnson as per specification and design of approved shade in skirting risers of steps and dados on 12mm (Elevel milimters) thick cement mortar 1:3 (1 cement : 3 sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete and as per the direction of the Engineer-Incharge, including entire carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 300x600mm (Three hundred into Six hundred millimetre) ceramic glazed tiles of Nitco/Kajaria/Orient/Bell/Johnson of approved shade in skirting and dado upto all heights with 12mm (Twelve milimetre) thick cement mortar 1:3(One cement :Three sand) jointing with cement slurry complete including carriage of material within all leads, lifts and other. incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing anti skid water proof stain and impect resistent heavy duty vetrified tiles of Nitco/ Kajaria/Orient-Bell/Johnson of approved size 600x600mm (Six hundred into Six hundred millimetre) of approved shade and colour in flooring, treads of steps and landings laid over 12mm (Twelve millimetre) thick cement mortar 1:3 (One cement : Three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying 20mm (Twenty milimetre) thick granite stone of required colour and shade in flooring laid over 20mm (Twenty milimetre) thick base of cement mortar 1:3 (One cement : Three sand) including jointing with grey cement slurry mixed with pigment to match the shade of granite stone including rubbing, polishing, moulding single or double, semi/round nosing complete including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying heavy duty precast cement concrete 60mm (Sixty millimetres) thick inter locking paver blocks ISI marked of NTC/Unistone IS No 15658 in PVC/fibre moulds with vibro compacted upto M-50(M-Fifteen) grade including border or kurb block grey or coloured laid over sub-base of concrete with 25mm (Twenty five millimetre) thick average thickness of cement mortar 1:4 (One cement : Four sand) laid over and jointed with neat cement slurry mixed with pigment to match the shade of blocks and curing rubbing & polishing complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 150mm (One hundred fifty millimetres) oxidized M.S. single acting spring hinges with necessary screw etctera complete including carriage of material within all leads, lifts and other. incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 600x600mm (Six hundred into six hundred millimeters) false ceiling of everest fibre board/cement bounded particle board ceiling with painted G.I. staructural steel channel framing @600mm ((Six hundred millimteres) centre to centre complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 0.60mm (Zero decimal Six Zero millimetre) thick prepainted steel sheet of TATA / Durashine/Reliance /Jindal in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating to back coat of polyster of 5 (Five) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks,bolts and nuts 6mm (Six millimetre) diametre with prepainted limpet and rubber washers complete with all accessories as required including carriage of material within all leads, lifts and other incidentals and further as per specifications, approved architectural drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing ridges or hips 60 cm (Sixty centimetres) over all with 0.63mm (Zero decimal Sixty three miliimetres) thick prepainted steel sheet ridges (Factory made) shall be having proper Gola/Shape of steel sheet Tata/ Durashine/Reliance /Jindal with hot dipped metallic Zinc coated sheet with top coat of regular modified polyester (RMP) organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating plus back coat of polyester of 5 (Five) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (Six millimetre) diametre with prepainted G.I. limpet and bitumen washers complete with all accessories as required including carriage of material within all leads, lifts and other incidentals and further as per specifications, approved architectural drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing valleys 90 cm (Ninety centimetre) over all with 0.63mm (Zero decimal Sixty three milimetre) thick prepainted sheet Tata/Durashine/Reliance /Jindal in roofing with hot dipped metallic Zinc coated sheet with top coat of regular modified polyester (RMP) organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating plus back coat of polyster of 5 (Five) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (Six milimetre) diametre with prepainted G.I. limpet and bitumen washers complete with all accessories as required complete including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 30cm (Thirty centimeter) wide 30cm (Thirty centimeters) deep of 0.63mm (Zero decimal six three millimetre) thick plain G.I. sheet gutter and shall be provided with dome shape grating including bolts, nuts and washers etcetera and making necessary connections with rain water pipe complete including carriage of material within all leads, lifts and other incidentals and further as per specifications, approved architectural drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing plain M.S. (mild steel) B.P. sheet 2mm (Two millimetre) thick fixed in eaves board/ceiling/soffits/including jointing with gas/electric welding in position and applying a coat of red lead primer complete (frame work is to be measured and paid for separately) including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 150 mm (One hundred fifty millmetre) dia pipes on wall face P.V.C (D-Plast) rain water pipes of Supreme/Kisan/finolex of working pressure not less than 6.0 kg/cm2 (Six point zero kilogram per sqaure centimetre) high density pipe confiming to IS Code 4985-2000 including filling the joints with approved adhesive complete as per specifications and as directed by the Engineer-In-charge, including entire carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing on wall face P.V.C. (D-plast) acessories for rain water pipes of working pressure not less than 6.0 kg/cm2 (Four pont five/six point zero kilogram per sqaure centimetre) as per IS mark of supreme/kisan/Finolex un plastisized PVC D-Plast high denesity pipe for rain water pipe fixed with approved adhesive including filling the joints complete and carriage of material within all leads, lifts and other. incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST or any other taxes imposed by the Government.

150mm (One hundred fifty milimtres)diameteres PVC Plain bend

150mm (One hundred fifty milimtres)diameteres PVC Plain shoe

Providing and fixing PVC holder bat clamps of approved design to PVC rain water pipe including cost of cutting holes and making good the walls etcetera; and carriage of material within all leads, lifts and other incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Steel work welded in built up sections/tublar/ Angular section, of TATA/SAIL in trusses, trussed purlins, main and cross beams, hips jack rafters, purlins connected to common rafters and the like in building including cutting, fixing, lifting, hoisting and; placing in position and applying a coat of red lead paint complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing angle iron frames manufactured from M.S. Angle iron section 25x25x5mm (Twenty five into Twenty five into Five millimetre) thickness including hinges jamb,lock jamb,beed and if required angle threshold of mild steel angle 25x25x5mm (Twenty five into Twenty five into five millimetre) welded or rigidly fixed by mechanical means, lugs with split end tails to each jamb including steel butt hinges 2.5mm (Two decimal Five millimetre) thick with provision for locking arrangement and shock absorber as specified and applying a coat of approved steel primer after pretreatment of the surface complete in all respect as per specifications, approved drawing, design including carriage of material within all leads, lifts and other incidentals, and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 6mm (six millimetre) thick cement bonded partical board sheet ceiling of approved quality with butt jointing and screws (frame work and cover fillets to be measured and paid for separately) including carriage of material within all leads, lifts and other incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Steel work welded in built up sections of TATA/SAIL in trusses and framed work including cutting, hoisting, fixing in position in beams, joists, channels, angles, tees flat with connecting plates or angle cleats etcetera in main and cross beams, hips, jack rafters, purlins/grills/gratings connected to common rafters and the like including carriage of material within all leads, lifts and other incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Supplying and fixing expended metal to wood or steel members in partition etctera having weight 6.50 Kg/sqm (Six poinr five zero kilogram per square metre) complete including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing M.S.fan clamp type-I of 16 mm (Sixteen milimetre) dia M.S. bar bent to shape with hooked ends in R.C.C slab during laying including painting the exposed portion of loop,all as per standard design complete and as directed by the Engineer-in-chargeincluding carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing staircase railing laying wooden hard rail 75x65mm (Seventy five into Sixty five millimetre) and baluster 85cms (Eighty five centimetre) height for stair case having baluster of 19x19mm nineteen into nineteen millimetres) M.S. solid square bars @60Cm (Sixty centimetre) centre to centre embeded in cement concrete steps the vertical balustars to be welded/jointed with each with 2 nos M.S. flat of 40x6mm (Forty into six millimetres) at top and bottam and applying priming coat of red load paint complete in all respect as per specifications approved drawing, design and as directed by the Engineer-in-Chagre. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing coloured anodised aluminium work for shutters of doors, windows & ventilators shutters of Jindal/Hindlaco aluminium extrusion including providing and fixing hinges/pivots and making provisions for fixing of fittings wherever required including the cost of PVC/neoprene gasket as required (fittings and glazing/panelling shall be paid for separately)with extruded built up standard tubular and other sections of approved make conforming to IS:733 and IS:1285 anodised transparent or dyed to required shade according to IS:1868. (Minimum anodic coating of grade AC-15) fixed with rawl plugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etcetera. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleast angle, aluminium, snap beading for glazing/ panelling C.P. brass/stainless steel screws all complete for shutters Jindal shall be used as per specifications, approved drawing, design as per entire satisfaction of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing coloured anodised aluminium work for frame of doors, windows, ventilators and glazed partitions of Jindal/Hindalco aluminium with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS:1285 anodised transparent or dyed to required shade according to IS : 1868. (Minimum anodic coating of grade AC-15) fixed with rawl plugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etcetera. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleat angle, aluminium, snap beading for glazing/panelling C.P. brass/stainless steel screws all complete as per architectural drawings specifications, design and as per the directions of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing stainless steel knock down railing of KICH AISI Grade 316 OF 38mm (Thirty eight milimetres) diametres hand rail fixed on 10x50mm (Ten into fifty millimetre) dia and SS flat baluster (Design code DT 53-2-163) placed at 1200mm (One thousand two hundred milimetres) centre to centre along with 3 Nos. (Three number) 16mm (Sixteen milimetre) mid rails connected at the side of balustered with fixtures . The balusteer would be fixed on the floor with casted based plate minimum 6mm (Six milimetres) thickness based plates shall be consealed with suitable S.S.316 GRADE covered cap. The railing height to be taken 85cm (Eighty five centimetre) from floor level. The aplication shall be done as per specifications, approved drawing, design complete including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 50mm (Fifty millimetre) dia M.S. hollow pipe balcony railing upto 90cm (Ninety centimetre) height welded with 25mm (Twenty five millimetre) diametre baluster embedded in cement concrete 30cm (Thirty centimetre) centre to centre and joining with electrical gas welding at top alongwith M.S. hollow pipe with 2 Nos. (TwoNumber) M.s. flat of 50x5mm (Fifty into five millimetre) including necessary fitting complete as per Architectural drawing, design and specification including entire carriage of materials within all leads, lifts and other incidentals and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Painting two or more coats (excluding priming coat) on new steel and other metal surfaces with enamel paint of Asian/ Nerolac/ Berger paint brushing to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matter enamel paint other than white including carriage of material within all leads, lifts and other incidentals as per specifications approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Applying priming coat over new wood and wood based surfaces with Nerolac/ Asian Berger paint after and including preparing the surfaces by thoroughly cleaning oil, grease, dirt and other foreign matter sand papering and knotting ready mixed paint brushin wood primer pink including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Painting two or more coats (excluding priming coat) on over new wood and wood based surfaces Nerolac/ Asian /Berger paint of approved shade with enamel paint brushing to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matter including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

6mm (Six milimetre) thick cement plasters in ceiling with cement mortar 1:3 (One cement: Three sand) for all heights including carriage of material wthin all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

15mm (Fifteen millimetre) thick cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering including arises, internal rounded angles, chamfers or rounded angles not exceeding 80mm (Eighty millimetre) in girth and finished even and smooth with cement mortar 1:6 (One cement: Six sand) above plinth level to floor all levels including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

15mm (Fifteen millimetre) thick cement plasters in single coat on rough side of brick/concrete/stone walls for interior plastering including arises, internal rounded angles, chamfers or rounded angles not exceeding 80mm (Eighty millimetre) in girth and finished even and smooth with cement mortar 1:6 (One cement: Six sand) upto floor all levels including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

15mm (Fifteen milimetre) thick cement plasters in single coat on fair side of brick/concrete/stone walls for interior plastering upto all floor level including arises, internal rounded angles, chamfers or rounded angles not exceeding 80mm (Eighty milimetre) in girth and finished even and smooth with cement mortar 1:5 (One cement : Five sand) above plinth level to floor all levels including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

15mm (Fifteen millimetre) thick cement plasters in single coat on fair side of brick/concrete/ stone walls for interior plastering upto all floor level including arises, internal rounded angles, chamfers or rounded angles not exceeding 80mm (Eighty millimetre) in girth and finished even and smooth with cement mortar 1:3 (One cement: Three sand) above plinth level to floor all level including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Applying Birla / J.K. white wall care putty over plaster surface after thoroughly brushing the surface free from mortar dropings, dust, loose material and other foreign matters, sand papered smooth to give final matt finish to the surface complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

20mm (Twenty millimetre) thick patteren in plaster cement plaster in two caots backing coat 10mm (Ten millimetre) thick and finishing coat 10mm thick on fair side of brick/stone masonry walls for interior plastering upto floor two level including arrises,internal rounded angles, chamfers or rounded angles not exceeding 80mm in girth and finished even and smooth with cement mortar 1:4 (One Cement : Four sand) complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Distempering (two or more coats) with oil bound distemper of Nerolac/Asian/Berger paints of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Finishing wall with apex weather proof exterior grade emulsion of Asian / Berger paints/Nerolac Suraksha on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth complete including carriage of material within all leads, lifts of material and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing plinth protection with 40mm (Forty milimetres) thick interlocking paver block and 23cm (Twenty three centimetre) dia half round RCC ware pipe for drainage purpose fixed over 10cm (Ten centimetre) thick 1:4:8 (one cement : four sand : eight gradded crushed stone aggregate) for bedding/haunching of pipe complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Wall painting (two coats) with Palstic emulsion paint of Heritage/allteck and manufacture for interior grade on undecorated concrete/stone/plastered wall surfaces to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty a required for metling the surface complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Finishing wall (Two or more coats) with Ultra stone 3C of Ultra tek or fine Dune/ natural grit of Heritage having coating thickness 1.5mm (One point five millimetre) of approved brand and manufacture and of required shade on un-decorated wall surfaces external finishing to give an even shade after thoroughly brushing the surfaces to remove all dirt, dust and remains of lose powdered materials complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Forming groove in plastering having size 15mm (Fifteen millimetre) wide and 15mm (Fifteen millimetres) deep groove as per architectural drawing & design complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing of water lifting pump of 1.00 HP (One point zero horse power) of Serex/Kirloskar/Crompton/Wortington including all necessary fittings complete in all respect including entire carriage of materials within all leads lifts and other incidentals, and as per specification and as per directed by the Engineer-Incharge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing Polythyelene – Aluminium -Polyethylene (PE-AL-PE) composite pressure pipe of Kitec /Kisan U.V. stabilized with carbon black Conforming to IS-15450-2004 for water supply including clamp at appropriate spacing, cutting, fixing and making good the wall etcetera but excluding the cost of fittings (internal work) pipes exposed on wall including filling the joints with approved adhesive complete as per specifications, approved drawing, design and entire carriage of material within all leads lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

1620 (20mm (Twenty millimetres) Outer diameters pipe

2025 (25mm (Twenty five millimetres) Outer diameters pipe

Providing and fixing composite end seal compression fittings as per IS-15450-2004 for water supply e.g. tees, elbows, reducers, connectors, couplers and clamps with jointing testing and fittings complete including cutting and making good the walls etctera including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

1620x20mm (One thousand six hundred twenty into Twenty millimetres) Equal Tee Kitec/Kisan

2025x25mm (Two thousand twenty five into Twenty five millimetres) Equal Tee Kitec/Kisan

1216 x 15mm (One thousand two hundred sixteen into fifteen millimetres) female elbow Thread of Kitec /Kisan

1620 x 20 mm (One thousand six hundred twenty into twenty millimetres) female elbow Thread of Kitec /Kisan

2025 x 25 mm (Two thousand twenty five into twenty five millimetres) female elbow Thread of Kitec /Kisan

1620 x 1620 x 20 mm (One thousand six hundred twenty into One thousand six hundred twenty into twenty millimetres) female branch tee Thread of Kitec /Kisan

2025 x 25 mm (Two thousand twenty five into twenty five millimetres) female branch Thread of Kitec /Kisan

1620 x 15mm (One thousand six hundred twenty into fifteen millimetres) male Thread connector of Kitec /Kisan

2025 x 25 mm (Two thousand twenty five into twenty five millimetres) Male Thread connector of Kitec /Kisan

1620 x 20mm (One thousand six hundred twenty into twenty millimetres) Female Thread connector of Kitec /Kisan

2025 x 25 mm (Two thousand twenty five into twenty five millimetres) Female Thread connector of Kitec /Kisan

1620 mm (One thousand six hundred twenty millimetres) Reducing Tee all branches of Kitec /Kisan

2025 mm (Two thousand twenty five millimetres) Reducing Tee all branches of Kitec /Kisan

1620mm thread (One thousand two hundred twenty millimetres) Coupler

2025 mm (Two thousand twenty five millimetres) Coupler

Making connection 20mm (Twenty millimetres) nominal size of galvanized mild steel distribution branch with galvanized mild steel main 20mm to 40nmm (Twenty millimetres to Forty millimetres)nominal bore by providing and fixing tees including cutting and threading the pipe complete and carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing in trenches P.V.C. pipe of Supreme/Finolex/Prince pipe class "A" soil, waste and ventilating pipes conforming to IS No- 13592-92 (8/4.6 mm thick (Eight/Four point six millimetre) fixing with adhesive mixure complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

110mm (One hundred one millimetre) nominal bore/diametres (2.7 mm (Two point seven millimetres) thick pipe

75mm (Seventy five millimetre) nominal bore/diametres (2.2mm (Two point two millimetres) thick pipe

Providing and fixing PVC Clamps of Supreme/Kisan/Prince/Finolex conforming to IS No. 14735-99 of finishing with approved design with steel screws and rawl plugs etc. complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

110mm (One hundred one millimetre) nominal bore/diametre

75mm (Seventy five millimetre) nominal bore/diametre

Providing and fixing PVC accessories for sewerage pipe plain bend of Supreme/Finolex/Prince/Astral conforming to IS No. 14735-99 including fixing with approved adhesive etc. complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

110mm (One hundred ten millimetre) nominal bore/diametre

75mm (Seventy five millimetre) nominal bore/diametre

Providing and fixing P.V.C. tee medium class of Supreme/ Kisan/Finolex Conforming to IS No-14735-99 ISI marked including fixing with approved adhesive complete, including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

110mm (One hundred ten millimetre) diametre

75mm (Seventy five millimetre) diametre

Providing and fixing P.V.C. Heal Rest of Supreme/ Finolex/Prince /Astral ISI marked Conforming to IS No-14735-99 including fixing joints with approved adhesive mixure complete as directed by the Engineer-Incharge, including entire carriage of materials within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

110mm (One hundred ten millimetre) diametre

75mm (Seventy five millimetre) diametre

Providing and fixing P.V.C. Collar Supreme/ Prince/Finolex ISI marked Conforming to IS No-14735-99 including fixing with approved adhesive complete, including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

110mm (One hundred ten millimetre) diametre

75mm (Seventy five millimetre) diametre

Providing and fixing P.V.C. Cowl Supreme/ Prince/Finolex ISI marked Conforming to IS No-14735-99 including fixing with approved adhesive complete, including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

110mm (One hundred ten millimetre) diametre

75mm (Seventy five millimetre) diametre

Providing and fixing PVC Supreme/ Prince / Finolex door bend with oval access door, insertion rubber washer 3mm (Three millimetres) dia thick bolts and nuts ISI marked Conforming to IS No-14735-99 complete including fixing with approved adhesive etcetra complete, including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

110mm (One hundred ten millimetre) diametre

75mm (Seventy five millimetre) diametre

Providing and fixing 110x75mm(One hundred ten into seventy five millimetres) ISI marked PVC floor trap of self cleaning design of Supreme/ Prince / Finolex including fixing with approved adhesive, cost of cutting and making good the wall and floors etcetra complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing PVC double equal branch with oval access door, of Supreme/ Prince / Finolex insertion rubber washer 3mm (Three millimetres) thick bolts and nuts ISI marked complete including fixing with approved adhesive etcetra complete including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

110mm (One hundred ten millimetre) diametre

75mm (Seventy five millimetre) diametre

Providing and fixing Anglo Indian W.C. (Universal) No-2061 of Hindware / Cera / Jaguar of white colour of approved shade vitreous china wash down water closet (European type W.C. pan) with integral P or S trap including jointing the trap with soil pipe with approved adhesive complete (seat and cover to be measured and paid for separately) including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing polythenepoly propylene 10.00 (Ten) litres capacity (Dual flush) European standard flushing cistern (Sleek flush) of Hindware/Cera/Jaguar of Star White, Snow White shade with fitting with a pair of brackets lead valve, syphon, 15mm nominal size PVC ball valve with polythene float, with push botton, couplings for connections with inlet,outlet and over flow pipe, 40mm dia C.P. (Chromium Plated) flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (overflow pipe to be measured and paid for separately) including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing in position with clamps 32mm (Thirty two millimetre) nominal size internal diametre galvanised steel tubes flush pipe for high level flushing cistern including connecting the flush pipe with cistern and closet and making good the walls and floors complete within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge.

Providing and fixing plastic seat solid type of Hindware/ Cera/ Jaguar and cover for wash down water closet with C.P. brass hinges and rubber buffers (Black & White plastic seat cover) for European W.C. pan including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing vitreous china wash basin Delta No. 10010 of Cera / Hindware / Jaguar of star white/snow white shade having size 55x40cm (Fifty five into forty centimetre) with single hole for pillar tap and C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fittings including entire carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 610x510x200mm (Six hundred ten into five hundred ten into two hundred milimetre) Size bowl stainless steel Kitchen sink of Priyag/Diamond/Unik of approved standard ISI marked with drain board and C.P. waste with C.I or M.S bracket painted white including cutting holes in walls and making good the same including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 32mm (Thirty two millimetre) nominal size diametres rubber plug for wash basin (Heavy duty ISI marked No. 8931) of Jal/ESS ESS including entire carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 32mm (Thirty two millimetre) diametre M.I. union of Jal/ESS for wash basin or sink.complete, including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 32mm (Thirty two millimetres) diametre ISI marked IS No. 8934 of Jal/ESS ESS waste pipe for wash basin or sink including brass check nut complete, including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 100mm (One hundred millimetres) diametres C.P. (Chromium plated) Grating of Jaguar/Jal//Silvafish/ESS ESS/Hindware/Cera (Superior quality ISI marked IS. No. 8934) for gully floor or Nahni trap and carriage of material within all leads, lifts and other incidental as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing flat back 600x450mm (Six hundred into Four hundred fifty millimetre) beveled edge mirror of Hindware/Cera /Jal/ESS ESS of superior glass mounted on 6mm (Six millimetre) thick A.C. (As bertos cement) sheet or ply wood sheet and fixed to wooden plugs with C.P. (Chromium plated) brass screws and washers including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 600x20mm (Six hundred into Twenty millimetre) C.P. (Chromium plated) brass Towel rail of Hindware/Cera /Jal/ESS ESS complete with C.P. (Chromium plated) brass brackets fixed to wooden plugs with C.P. brass screws etcetera including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 600x120mm (Six hundred into One hundred twenty millimetres) glass shelf with C.P. (Chromium plated) of Jal/ESS ESS/ Jaguar/Hindware/ccera brackets and guard rail complete fixed to wooden plugs with C.P. (Chromium plated) brass screws including entire carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen milimetres) diametres C.P. brass stop cock IS marked No. 8934 of Continental series of Jaguar/Classic series including carriage of material within all leads, lifts and other incidentals as per specifications approved drawing, design and as directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing liquid soap container with C.P. brass lid and brackets fixed to wooden plugs with C.P. brass screws, plastic container of Jal/Jaquar / ESS ESS including necessary fitting complete and entire carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen millimetre) nominal bore PVC connection pipe with brass union 45cm (Forty five Centimetres) length complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing PVC single equal branch with oval access door, of Supreme/ Prince / Finolex insertion rubber washer 3mm (Three millimetres) thick bolts and nuts ISI marked complete including fixing with approved adhesive etcetra complete including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

150mm (One hundred fifty millimetre) diametre

110mm (One hundred ten millimetre) diametre

Providing and fixing PVC plain bend of Supreme/Finolex/Prince/Astral conforming to IS No. 14735-99 including fixing with approved adhesive etc. complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

150mm (One hundred fifty millimetre) diametre

110mm (One hundred ten millimetre) diametre

Providing and fixing C.P. (Chromium plated) brass toilet paper holder (Heavy duty make ISI marked No- 8931 & 8934) of Jal/ESS ESS/Jaguar/Hindware/ Cera including necessary fitting complete including entire carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing Chromium plated Jet spray of approved quality and ISI marked No 8934 of Jal/ESS ESS/Jaquar/Hindware/ Cera of approved quality and colour with one metre tube including necessary fitting complete including entire carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen millimetres) nominal bore chromium plated fancy bib tap of Opal Prime (Single Lever) series of Jaquar/Fluid series of Hindware including necessary fitting complete as per specifications including entire carriage of material within all leads lifts and other incidentals, and per as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen millimetres) diametres C.P. brass pillar tap with capstan headOpal Prime (Single Lever) series of Jaguar/Fluid series of Hindware/Cera/Jal/ESS ESS including necessary fitting including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen milimetres) diametres brass angle valve without nuts Hindson series of Jal / Jaquar/ESS ESS including necessary fitting complete including entire carriage of material within all leads, lifts and other incidentals, as per specification approved drawing, design and as directed by the Engineer-Incharge. The rate inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing C.P. brass full way valve with wheel ISI marked IS No. 8934) of Jal/ESS ESS/Jaquar as per specifications including carriage of material within all leads, lifts and other incidentals, and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

15mm (Fifteen millimetres) nominal bore

20mm (Fifteen millimetres) nominal bore

Providing and fixing 15mm (Fifteen millimetre) nominal bore C.P. (Chromium plated) brass valve (Horizontal plunger type) of Continental Series of Jaquar/Jal/ESS ESS high pressure with copper plate as per specifications including entire carriage of material within all leads lifts and other incidentals, and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing P.V.C. Sintexwater storage tank (Tripple layers) having capacity of 1000 (One thousand) liters of ISI marked IS No. 12701 with G.I. (Galvanised iron) inlet and outlet connection, 15mm (Fifteen millimetres) nominal bore ball valve and mosquito proof P.V.C. cover with locking arrangment including hoisting upto all heights above ground level and entire carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 150mm (One hundred fifty millimetre) nominal bore/diametres to level or slopes PVC pipe of Supereme/Finolex/Prince for sewerage line including joint with approved adhesive complete including entire carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying cement concrete 1:4:8 (One cement : Four sand : Eight graded crushed stone aggregate 40mm (Forty millimetre) nominal size bedding for P.V.C. pipe of 150mm (One hundred fifty millimetre) nominal bore/diametre with necessary form work and curing complete including entire carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying 150 mm (One hundred fifty milimetres) diametre with cement concrete 1:3:6 (One cement : Three sand : Six graded crushed stone aggregate 40mm (Forty millimetres) nominal size) concrete for haunching with neccessary form work and curing complete including entire carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing vitreous China pedestal of CERA/Jaquar /Hindware for wash basin complete recessed at the back for the reception of pipes and fittings complete including entire carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 15mm (fifteen millimetres) nominal size mixer for kitchen sink with top/bottom swinging spout at top complete ISI marked of Jaquar/Cera/ESS ESS/Jal with necessary fittings complete including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Construction manhole with R.C.C. top slab in 1:2:4(One cement: Two sand: Four graded crushed stone aggregate 20mm (Twenty milimetre nominal size) foundation concrete 1:4:8 (One cement: Four sand: Eight graded crushed/broken stone aggregate 40mm (Forty milimetre nominal size) inside plastering 15mm (Fifteen milimetre) thick with cement mortar 1:3 (One Cement: three sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4(One cement: Two sand: Four graded crushed stone aggregate 20mm(Twenty milimetre nominal size) finished smooth complete including curing and testing inside size 800x800mm (Eight hundred into Eight hundred milimetre) 500mm(Five hundred milimetre) deep, including C.I. cover with frame (light duty single seal pattern -I) 455x610mm (Four hundred fifty five into six hundred and ten milimetre) internal dimensions total weight of cover and frame to be not less than 38 Kgs (Thirty eight kilogram) weight of cover 23Kgs (Twenty three kilograms) and weight of frame 15 Kgs (Fifteen kilogram) with 300mm (Three hundred milimetre) thick walls of squared rubble masonry coursed with hard stone of approved quality in cement mortar 1:3 (one cement: three sand) including entire carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Construction manhole with R.C.C. top slab in 1:2:4 (One cement: Two sand: Four graded crushed stone aggregate 20mm (Twenty milimetre nominal size) foundation concrete 1:4:8 (One cement: Four sand: Eight graded crushed/broken stone aggregate 40mm(Forty milimetre nominal size) inside plastering 15mm (Fifteen milimetre) thick with cement mortar 1:3 ( One Cement: three sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 (One cement: Two sand: Four graded crushed stone aggregate 20mm(Twenty milimetre nominal size) finished smooth complete including curing and testing inside size 800x800mm (Eight hundred into Eight hundred milimetre) 1.00 mtrs(One metre) deep, including C.I. cover with frame (light duty single seal pattern -I) 455x610mm (Four hundred fifty five into six hundred and ten milimetre) internal dimensions total weight of cover and frame to be not less than 38 Kgs (Thirty eight kilograms) weight of cover 23Kgs(twenty three kilogram) and weight of frame 15 Kgs (Fifteen kilogram) with 300mm (Three hundred milimetre) thick walls of squared rubble masonry coursed with hard stone of approved quality in cement mortar 1:3 (one cement: three sand) including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Construction brick masonry chamber for under ground C.I. Inspection chamber and bends with common burnt clay building bricks in cement mortar 1:5 (One : Five) C. I. cover with frame (light duty) 455x610mm (Four hundred fifty five and Six hundred ten millimetere) internal dimensions total weight cover with frame to be not less than 38kg weight of cover 23kgs and weight of frame 15kgs 9Fifteen kilogram) RCC top slab 1:2:4 (1 cement : 2 sand : 4 graded crushed stone aggregate 20mm (Twenty millimetre) foundation concrete 1:5:10 (1 cement : 5 sand : 10 graded crushed/broken stone aggregate 40mm (Forty millimetre) nominal size inside plastering 15mm thick with cement mortar 1:3 (1cement:3 sand) finished with a coat of neat cement on walls and bed concrete etcetera complete inside dimensions 455x610mm (Four hundred fifty five into six hundred ten milimeter) and 450mm (Four hundred fifty milimeter) deep single pipe line complete in all respect including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 20mm (Twenty milimetres) nominal bore peet valve ISI marked without nut and pipe complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

M/s Kulwinder Singh and Co.