Loading
Loading…
Loading…
Tender ID
Tender Value
₹9.7 L
EMD Value
₹19,373
Closing Date
16 Apr 2026, 3:00 pmClosed
Executive Engineer, Capital Complex Division, PWD
O/o the Executive Engineer, Capital Complex Division, PWD(Buildings), Agartala
Routine maintenance of Type-VI quarters of Kunjaban Extension, Agartala under Capital Complex Sub-Division No-I during the year 2026-27 (Group-I).
2026_CEPWD_71963_1
03/DNIT/EE/CCD/PWD/2026-27
Open Tender
Civil Works - Building
Percentage
180 days
Capital Complex, Agartala
Please refer Tender documents.
7 documents required · 7 mandatory
₹1,000
₹19,373
18 Apr 2026
9 Apr 2026
16 Apr 2026
9 Apr 2026
16 Apr 2026
9 Apr 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Finishing walls with acrylic smooth exterior paint of required shade of approved brand and manufacture on old work ( one or more coats ) including preparation of surface as required complete as per direction of the Engineer in charge. | |||||
| 2Distempering with 1st quality washable acrylic distemper of approved brand and manufacture and of required shade on old work ( one or more coats ), to give an even shade as required complete as per direction of the Engineer in charge. | |||||
| 3Painting with synthetic enamel paint ( one or more coats ) of required colour of approved brand and manufacture on old work to give an even shade including preparation of surface as required complete as per direction of the Engineer in charge. | |||||
| 4First class brick work in foundation and plinth including cost of all materials as required complete:- i) In cement mortar 1:4 ( 1 cement : 4 fine sand ). | |||||
| 5Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veeners on both faces of shutters. i) 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. | |||||
| 612 mm cement plaster of mix i)Cement mortar 1:4 (1 cement : 4 fine sand) | |||||
| 7Neat cement punning | |||||
| 8Providing and fixing Stainless Steel AISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required: Kitchen sink without drain board i) 610x510 mm bowl depth 200 mm | |||||
| 9Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | |||||
| 10Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : i) White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps | |||||
stage.html
html • 0.02 MB
cancelled_1.pdf
pdf • 0.21 MB
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.52 MB
fdnit.pdf
Tender Documents • 3.35 MB
BOQ_73238.xls
BOQ • 0.35 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .