REPAIR / MAINT OF PACKAGE TYPE AC, EARTHING, PANELS, ROOF TOP SOLAR HEATER, AVIATION LIGHTS, BOOM BARRIERS ALONG WITH OTHER ASSOCIATED WORKS AT AF STATION KHAMBHALIYA AND DWARKA UNDER GE (AF) JAMNAGAR NO.2

Amount

Supply and installation, testing, commissioning outdoor type cubical type LT Panel made out of 3.0mm thick CRCA sheet, 415 Volt, 3 phase, 50 HZ supply factory made of MS angle section 40 x40x 5mm frame with front and back openable double door with provision of locking arrangement dust & vermin proof, gasket, TPN busbar shall be insulated with colour coated heat shrinkable sleeves and shall be mounted on proper insulator, gland, welding hinges of dust proof duly spray painted inside and outside of panel with one coat of red oxide primer and two coat of synthetic enamel paint grey complete all as specified and directed & Consisting of the following accessories:-

(C) Outgoing:(I) MCCB 100 Amp,Icu-25 KA, 3 pole, 415 volts - 06 Nos complete all as specified and as directed by Engr-in-charge. Note: (i) PCC 1:2:4 for grouting included in the total cost of Panel (ii) Excavation and earth included in total cost (iii) Necessarty lugs for cable fitment included in total cost of panel (iv) FRLS copper conductor cable of suitable size shall be used for Control wiring for LT panel complete for incoming/outgoing.

Supply and installation, testing, commissioning outdoor type cubical type LT Panel made out of 3.0mm thick CRCA sheet , 415 Volt, 3 phase , 50 HZ supply factory made of MS angle section 40 x40x 5mm frame with front and back openable double door with provision of locking arrangement dust & vermin proof , gasket, TPN busbar shall be insulated with colour coated heat shrinkable sleeves and shall be mounted on proper insulator, gland, welding hinges of dust proof duly spray painted inside and outside of panel with one coat of red oxide primer and two coat of synthetic enamel paint grey complete all as specified and directed & Consisting of the following accessories:-

(C) Outgoing:(I) MCCB 100 Amp,Icu-25 KA, 3 pole, 415 volts - 02 Nos (ii) MCCB 63 Amp,Icu-16KA, 3 pole, 415 volts - 02 Nos (ii) MCCB 32 Amp, Icu-16KA, 3 pole, 415 volts - 02 Nos complete all as specified and as directed by Engr-in-charge. Note: (i) PCC 1:2:4 for grouting included in the total cost of Panel (ii) Excavation and earth included in total cost (iii) Necessarty lugs for cable fitment included in total cost of panel (iv) FRLS copper conductor cable of suitable size shall be used for Control wiring for LT panel complete for incoming/outgoing.

Supply and installation, testing, commissioning outdoor type cubical type LT Panel made out of 3.0mm thick CRCA sheet, 415 Volt, 3 phase, 50 HZ supply factory made of MS angle section 40 x40x 5mm frame with front and back openable double door with provision of locking arrangement dust & vermin proof, gasket, TPN busbar shall be insulated with colour coated heat shrinkable sleeves and shall be mounted on proper insulator, gland, welding hinges of dust proof duly spray painted inside and outside of panel with one coat of red oxide primer and two coat of synthetic enamel paint grey complete all as specified and directed & Consisting of the following accessories:-

(C) Outgoing:(I) MCCB 63 Amp,Icu-16KA, 3 pole, 415 volts - 04 Nos (ii) MCB 32 Amp, Icu-16KA, 3 pole, 415 volts - 04 Nos complete all as specified and as directed by Engr-in-charge. Note: (i) PCC 1:2:4 for grouting included in the total cost of Panel (ii) Excavation and earth included in total cost (iii) Necessarty lugs for cable fitment included in total cost of panel (iv) FRLS copper conductor cable of suitable size shall be used for Control wiring for LT panel complete for incoming/outgoing.

Material and labour for earthing complete with galvanized steel earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground vertically to depth not less than 2.5m below normal ground level with top edge of the earth plate at a depth not less than 1.5m below ground level connected to and including 25X4 GI iron strip by means of bolts nuts, check nuts and washer etc made of GI and connected to testpoint and earth dolly all as shown in electrical plate No 5 of MES SSR Part I, 1991 including excavation and earth work in any type of soil PCC (1:3:6) type C1 (using 20mm graded stone aggregates) in chamber, precast RCC 50mm thick in cement concrete (1:2:4) type B1 (using 20mm grade stone aggregrates), reinforced with welded steel wire fabric or XMP (weight not less than 4 KG/Square meter) with cast iron frame, funnel with wire mesh, 20 mm bore medium grade GI watering pipe, lugs, 15mm bore medium grade GI protection pipe, test point etc. complete all as specified and directed.

M&L for Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 25x4 mm galvanised iron strip

Material and labour for installation, testing and commissioning of earthing using following material including necessary T&P required to complete job for earthing, excavation etc. Make:- Powertrac Model No-PT-803 or equivalent of make PRAGATI/ McML's Earthing Solution (MES) / Ashlock (a) 'CHEMO' M.F. Earthing Electrode (conforming to IS 3043:1987) of copper, 3.00 metre long, 76 mm outer dia, copper inner strip of size 50 x 6 mm thick upto 2 metre length, pipe filled with SRIP compound (75 kg per earthing electrode) with powerplus gel 10 Kg (b) FRP based earthing display board with support stand FRP coated width-254 mm, length-380mm, height-610 mm (c) FRP Chamber cover top 420 mm base 340 mm and height 210 mm

Supply and fix of Copper strip 20 x 3.15mm with saddles and fixing screws etc. for roof conductors and down conductors above ground complete all as specified and directed.

Supply and fix in repair boom barrier control unit suitable for existing complete all as specified and directed.

Supply and fix in repair boom barrier MS body for existing size to cover all the parts and to support the boom suitable for existing complete all as specified and directed.

Supply and fix in repair boom barrier Gear motor for existing size to for existing complete all as specified and directed.

Supply and fix in repair boom barrier spring set r for existing size for existing complete all as specified and directed.

Supply and fix in repair boom barrier safety sensor for existing complete all as specified and directed.

Supply and fix in repair boom barrier auto manual key for existing complete all as specified and directed.

Supply and fix in repair boom barrier remote kit for existing complete all as specified and directed.

Supply and fix in repair boom barrier boom (06 mtr length) for existing complete all as specified and directed.

Supply and fix in repair boom barrier boom rest for existing complete all as specified and directed.

Supply and fix aviation light for over head tank in red colour power consumption upto 5 W IP 65 polycarbonate glass for 360 degree illumination complete all as specified and directed.

supply and fix solar panel for of required size and capacity inbuilt highest quility tougned glass of 12v with excellent low light efficiency,anti refletive coating complete all as specified and directed.

Supply and fix battery upto 150 Ah and 12V as per site requiment complete all as specified and directed.

M&L for fabrication & fixing in position mild steel work for covers, supporting clamps of pipe, ladders, support structure for solar water system mild steel section such as angle, flat, Tee, nut & bolt etc etc, cutting, welding cold or hot drilling holes in any shape or size and fixing arrangement, including painting with two coats of synthetic enamel paint over a coat of red oxide primer complete using steel section of Fe 290 Grade -165 including dismantling of old steel work complete all as specified and directed.

Material and labour for maintenance of Precision type Package Air conditioning of 8.5 TR with replacement of old/unsv spare parts as under including testing on load complete all as specified and directed

supply and fix in repair Evaporator centrifugal blower motor with rotor of same size and capacity of Precision type Package Air conditioning.

Supply and fix in repair condenser fan motor with blade of same size and capacity of Precision type Package Air conditioning.

Supply and fix in repair LP cutout for compressor of Precision type Package Air conditioning.

Supply and fix in repair HP cutout for compressor of Precision type Package Air conditioning.

Supply and fix in repair microwave filter for compressor of Precision type Package Air conditioning

Supply and fix in repair filter drier for compressor of Precision type Package Air conditioning.

Supply and fix in repair Micro-processing Controller (I Com) of Precision type Package Air conditioning.

Supply only in repair Infrared Humidifier of Precision type Package Air conditioning.

Supply and fix in repair Expansion Valve for compressor of precision Air conditioning unit complete all as specified and directed.

Supply and fix in repair Air sensor for compressor of precision Air conditioning unit complete all as specified and directed

Supply and fix in repair Printed Circuit Board of Precision type Package Air conditioning of capacity 33000 kcal/Hr unit complete all as specified and directed

Supply and fix in repair Condenser fan motor with blade of Precision type Package Air conditioning of capacity 33000 kcal/Hr unit complete all as specified and directed

Supply & fix in repair hermetically sealed Scroll Compressor with base frame & electric phase reversal protection of capacity 7.5 TR of Precision type Package Air conditioning (Make: Emersion, Model: PEC130 RA/DA with I Com) comprising fallowing job:- (i) Charging of nitrogen gas in unit & complete system at 300 psi pressure and checking of any dropping of pressure/ leakage upto 72 Hrs after replacement of compressor & rectification of leakage if any. (ii) Vaccumisation of complete system for minimum 2 days for dropping of vaccume pressure & rectification of leakage if any. (iii) Charging of complete system with R-407 gas for maitaining the system pressure upto HP-175 psi & LP-65 psi. (iv) Measure the inlet and outlet temperature of package unit. (v) Testing and commisioning of compressor after completion.

Supply and toping up refrigerant gas R-407 C to the central / package AC plant of any capacity system complete all as specified and directed.

Supply and installation, testing, commissioning outdoor type cubical type LT Panel made out of 3.0mm thick CRCA sheet, 415 Volt, 3 phase, 50 HZ supply factory made of MS angle section 40 x40x 5mm frame with front and back openable double door with provision of locking arrangement dust & vermin proof, gasket, TPN busbar shall be insulated with colour coated heat shrinkable sleeves and shall be mounted on proper insulator, gland, welding hinges of dust proof duly spray painted inside and outside of panel with one coat of red oxide primer and two coat of synthetic enamel paint grey complete all as specified and directed & Consisting of the following accessories:-

(C) Outgoing:(I) MCCB 100 Amp,Icu-25 KA, 3 pole, 415 volts - 04 Nos (ii) MCCB 63 Amp,Icu-25 KA, 3 pole, 415 volts - 01 No complete all as specified and directed. Note: (i) PCC 1:2:4 for grouting included in the total cost of Panel (ii) Excavation and earth included in total cost (iii) Necessarty lugs for cable fitment included in total cost of panel (iv) FRLS copper conductor cable of suitable size shall be used for Control wiring for LT panel complete for incoming/outgoing.

Supply and installation, testing, commissioning outdoor type cubical type LT Panel made out of 3.0mm thick CRCA sheet, 415 Volt, 3 phase, 50 HZ supply factory made of MS angle section 40 x40x 5mm frame with front and back openable double door with provision of locking arrangement dust & vermin proof, gasket, TPN busbar shall be insulated with colour coated heat shrinkable sleeves and shall be mounted on proper insulator, gland, welding hinges of dust proof duly spray painted inside and outside of panel with one coat of red oxide primer and two coat of synthetic enamel paint grey complete all as specified and directed & Consisting of the following accessories:-

(C) Outgoing:(I) MCCB 100 Amp,Icu-25 KA, 3 pole, 415 volts - 04 Nos (ii) MCCB 63 Amp,Icu-25 KA, 3 pole, 415 volts - 02 No complete all as specified and as directed by Engr-in-charge. Note: (i) PCC 1:2:4 for grouting included in the total cost of Panel (ii) Excavation and earth included in total cost (iii) Necessarty lugs for cable fitment included in total cost of panel (iv) FRLS copper conductor cable of suitable size shall be used for Control wiring for LT panel complete for incoming/outgoing.

Krishna Bhoomi Enterprise