Renovation and Construction work for Old Guest House Sulthan Bathery , Wayanad

Amount

GROUND FLOOR - RENOVATION WORK

15.9.2 : Demolishing stone rubble masonry manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer -in- Charges:In cement mortar

15.12.1 : Dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:Of area 3 sq. metres and below

15.12.2 : Of area beyond 3 sq. metres

15.23.1 : Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm

15.2.2 : Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:4:8 leaner mix ( including equivalent design mix)

15.3 : Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of Engineer -in-Charge.

15.7.4 : Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar

od246709/2020_2021 : Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).<br>First class teak wood

od246710/2020_2021 : Providing and fixing panelled or panelled and glazed shutters for shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessery screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer - in-charge.<br>First class teak wood<br>35 mm thick shutters

od246711/2020_2021 : Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel excluding portion inside grooves or rebates to be measured), Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick:<br>First class teak wood

9.7.7.2 : Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured), Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick:5.5mm thick glass pane

od246712/2020_2021 : Providing panelling with first class teak wood panels for existing frames of doors including polishing and including cost and conveyance of all materials labour charges etc complete

9.48.2 : Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to openings/ wooden frames with rawl plugs screws etc

11.36 : Providing and fixing I st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer -in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

11.39 : Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS: 15622, of approved make in colours White, Ivory, Grey, fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 Coarse sand), including grouting the joints with white cement and matching pigments etc., complete.

11.49.2 : Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS : 15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tiles 600x600 mm

11.47.2 : Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS : 15622, of approved brand & manufacturer,in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tile 600x600 mm

11.48.2 : Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg). including filling /grouting and finishing complete as per direction of Engineer-in-charge.Size of Tile 600x600 mm

12.45.1 : Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with:12.5 mm thick tapered edge gypsum plain board conforming to IS : 2095-Part 1

13.26 : Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.

13.69.1 : Polishing on wood work with ready mixed wax polish of approved brand and manufacture:New work

13.67.1 : Varnishing with varnish of approved brand and manufacture :Two or more coats of glue sizing with copal varnish over an under coat of flatting varnish

13.85.2 : Applying priming coats with primer of approved brand and manufacture, having low VOC ( Volatile Organic Compound) content.With ready mixed red oxide zinc chromatic on steel / iron works having VOC content less than 250 grams/ litre

13.84.2 : Painting with synthetic enamel paint, having VOC (Volatile Organic Compound) content less than 150 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.Two coats

14.53.1 : Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:One or more coats on old work

14.66.1 : Finish walls with Acryllic Smooth exterior paint of required shade:Old work ( Two or more coats applied @ 1.67 ltr/10 sqm) on existing cement paint surface

NEW CONSTRUCTION

2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

2.26.1 : Extra for every additional lift 1.5 m or part there of in excavation / banking excavated or stacked materials.All kinds of soil

51.2.3 : Filling with Quarry Muck <br> Filling up low lying and water logged areas with local material/ quarry muck, spreading in layers, leveling the top at site and consolidation by ramming, etc complete for improving the CBR value of subgrade

4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

7.1.1 : Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand)

5.9.1 : Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete

5.1.2 : Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size

5.9.6 : Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts

5.2.2 : Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up tot floor five level excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

5.9.5 : Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers

5.9.3 : Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform

5.3 : Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 15⁰ landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size).

5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

50.6.2.2 : Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete

50.6.3.2 : Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x10 cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level for 10 cm thick wall in : CM 1:6 ( 1 cement : 6 coarse sand) including cost of scaffolding complete

13.4.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 coarse sand)

od246709/2020_2021 : Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia &amp; length (hold fast lugs or dash fastener shall be paid for separately).&lt;br&gt;First class teak wood

od246710/2020_2021 : Providing and fixing panelled or panelled and glazed shutters for shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessery screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer - in-charge.&lt;br&gt;First class teak wood&lt;br&gt;35 mm thick shutters

od246711/2020_2021 : Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel excluding portion inside grooves or rebates to be measured), Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick:&lt;br&gt;First class teak wood

9.7.7.2 : Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured), Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick:5.5mm thick glass pane

9.48.2 : Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to openings/ wooden frames with rawl plugs screws etc

9.123 : Providing and fixing factory made door frame (single rebate) made out of single piece extruded solid PVC foam profile with homogeneous fine cellular structure having smooth outer integral skin having 62 mm width & 32 mm thickness, frame will be mitred & jointed with self driven self tapping screws of size 38 mm x 4 mm & PVC solvent cement, including fixing the frame to wall with suitable dia & length anchor fastener as per manufacturer's specification and direction of Engineer-in-charge.

9.124.1 : Providing and fixing factory made 30 mm thick door shutter made of solid PVC foam profile. The styles & rails shall be of size 75 mm x 30 mm having wall thickness 5 mm. The styles, top & bottom rails shall have one side wall thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power. The styles and rails shall be reinforced with M.S. tubes of size 33 mm x 17 mm x 1 mm, painted with primer, all four corners of reinforcement to be welded or sealed. Solid PVC extruded bidding (Push fit type) will be set inside the styles and the rails with a cavity, to receive single piece extruded 5 mm PVC sheet as panel. The styles and rails will be mitred cut and joint with the help of PVC solvent cement & self driven self tapping screws. Single piece extruded solid PVC lock rails of sixe 100mm x 30 mm with wall thickness 5 mm & 15 mm integrally extruded in the middle of the lock rail & fixed with styles with the help of PVC solvent cement & self driven self tapping screws of size 100 mm x 8 mm complete as per manufacturer's specifications and direction of Engineer -in-charge.Non decorative finish

11.41.2 : Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm.

11.46.2 : Providing and laying Vitrified tiles indifferent sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm

12.45.1 : Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with:12.5 mm thick tapered edge gypsum plain board conforming to IS : 2095-Part 1

13.26 : Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.

od246713/2020_2021 : Providing and fixing box type partition with Marine grade plywood both side natural teak wood veneered sheet on top and teak wood reepers on side etc complete as per architectural drawings and directions of engineer in charge.

13.37.1 : White washing with lime to give an even shade:New work (three or more coats)

13.69.1 : Polishing on wood work with ready mixed wax polish of approved brand and manufacture:New work

13.67.1 : Varnishing with varnish of approved brand and manufacture :Two or more coats of glue sizing with copal varnish over an under coat of flatting varnish

13.85.2 : Applying priming coats with primer of approved brand and manufacture, having low VOC ( Volatile Organic Compound) content.With ready mixed red oxide zinc chromatic on steel / iron works having VOC content less than 250 grams/ litre

13.84.2 : Painting with synthetic enamel paint, having VOC (Volatile Organic Compound) content less than 150 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.Two coats

13.85.3 : Applying priming coats with primer of approved brand and manufacture, having low VOC ( Volatile Organic Compound) content.With water thinnable cement primer on walls surface having VOC content less than 50 grams / litre

13.82.2 : Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture including applying additional coats wherever required, to achieve even shade and colour.Two coats

RENOVATION WORK - FIRST FLOOR

15.9.2 : Demolishing stone rubble masonry manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer -in- Charges:In cement mortar

15.12.1 : Dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:Of area 3 sq. metres and below

15.12.2 : Of area beyond 3 sq. metres

15.23.1 : Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm

15.2.2 : Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:4:8 leaner mix ( including equivalent design mix)

15.3 : Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of Engineer -in-Charge.

od246709/2020_2021 : Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia &amp; length (hold fast lugs or dash fastener shall be paid for separately).&lt;br&gt;First class teak wood

od246710/2020_2021 : Providing and fixing panelled or panelled and glazed shutters for shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessery screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer - in-charge.&lt;br&gt;First class teak wood&lt;br&gt;35 mm thick shutters

od246711/2020_2021 : Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel excluding portion inside grooves or rebates to be measured), Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick:&lt;br&gt;First class teak wood

od246712/2020_2021 : Providing panelling with first class teak wood panels for existing frames of doors including polishing and including cost and conveyance of all materials labour charges etc complete

9.7.7.2 : Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured), Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick:5.5mm thick glass pane

9.48.2 : Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to openings/ wooden frames with rawl plugs screws etc

od246713/2020_2021 : Providing and fixing box type partition with Marine grade plywood both side natural teak wood veneered sheet on top and teak wood reepers on side etc complete as per architectural drawings and directions of engineer in charge.

11.36 : Providing and fixing I st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer -in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

11.39 : Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS: 15622, of approved make in colours White, Ivory, Grey, fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 Coarse sand), including grouting the joints with white cement and matching pigments etc., complete.

11.49.2 : Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS : 15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tiles 600x600 mm

11.47.2 : Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS : 15622, of approved brand & manufacturer,in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tile 600x600 mm

11.48.2 : Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg). including filling /grouting and finishing complete as per direction of Engineer-in-charge.Size of Tile 600x600 mm

12.45.1 : Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with:12.5 mm thick tapered edge gypsum plain board conforming to IS : 2095-Part 1

13.26 : Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.

13.69.1 : Polishing on wood work with ready mixed wax polish of approved brand and manufacture:New work

13.67.1 : Varnishing with varnish of approved brand and manufacture :Two or more coats of glue sizing with copal varnish over an under coat of flatting varnish

13.85.2 : Applying priming coats with primer of approved brand and manufacture, having low VOC ( Volatile Organic Compound) content.With ready mixed red oxide zinc chromatic on steel / iron works having VOC content less than 250 grams/ litre

13.84.2 : Painting with synthetic enamel paint, having VOC (Volatile Organic Compound) content less than 150 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.Two coats

14.53.1 : Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:One or more coats on old work

14.66.1 : Finish walls with Acryllic Smooth exterior paint of required shade:Old work ( Two or more coats applied @ 1.67 ltr/10 sqm) on existing cement paint surface

50.6.2.2 : Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete

50.6.3.2 : Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x10 cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level for 10 cm thick wall in : CM 1:6 ( 1 cement : 6 coarse sand) including cost of scaffolding complete

5.9.5 : Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers

5.3 : Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 15⁰ landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size).

5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

13.4.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 coarse sand)

11.41.2 : Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm.

13.85.3 : Applying priming coats with primer of approved brand and manufacture, having low VOC ( Volatile Organic Compound) content.With water thinnable cement primer on walls surface having VOC content less than 50 grams / litre

13.82.2 : Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture including applying additional coats wherever required, to achieve even shade and colour.Two coats

10.2 : Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

od250570/2020_2021 : Supplying and stacking roofing with 1 st class MP Tiles 340 mm or nearest available size including cost and conveyance of all materials and labour charges etc complete

od250573/2020_2021 : Supplying and stacking1 st class MP Hip and RidgeTiles 340 mm or nearest available size including cost and conveyance of all materials and labour charges etc complete

od250571/2020_2021 : Setting MP Hip and Ridge tiles set in cement mortar 1:3 (1 cement:3 fine sand) including finishing the edges with cost and coveyance of all materials to site and all labour charges etc complete

od250575/2020_2021 : Pointing the MP tiles with cement mortar 1:2 (1 cement:2 fine sand)over tiled roof including preparing mortar ,cost and conveyance of all materials to site and all labour charges etc complete.

22.15 : Providing and laying in situ seven course water proofing treatment with APP ( Atactic poly- propylene) modified Polymeric membrane over roof consisting of first coat of bitumen primer @ 0.40 Kg per sqm, 2nd, 4th & 6th courses of bonding material @ 1.20 Kg/sqm, which shall consist of blown type bitumen of grade 85/25 conforming to IS 702, 3rd and 5th layers of roofing membrane APP modified polymeric membrane 1.5 mm thick of 2.25 Kg/ sqm weight consisting of five layers prefabricated with centre core as 20 micron HMHDPE film sandwiched on both sides with polymeric mix and the polymeric mix is protected on both side with 20 micron HMHDPE film. 7th, the top most layer shall be finished with brick tiles of class designation 10 grouted with cement mortar 1:3 ( 1 cement : 3 fine sand) mixed with 2% integral water proofing compound by weight of cement over a 12 mm layer of cement mortar 1:3 ( 1 cement : 3 fine sand) and finished neat ( item of laying brick tiles shall be paid for separately).

22.6 : Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying : a) after surface preparation, first layer of slurry of cement @ 0.488 kg/ sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. laying second layer of fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/ sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around. d) fourth and final layer of brick tilling with cement mortar (which will be paid for separately. For the purpose of measurement the entire treated surface will be measured)

FITTINGS FOR DOOR AND WINDOWS

9.56.1 : Providing and fixing ISI marked, IS : 1341, M.S. heavy weight butt hinges with necessary screws etc. complete:125x90x40.00 mm

9.57.1 : Providing and fixing ISI marked oxidised M.S. pressed butt hinges with necessary screws etc. complete.125x65x2.12 mm

9.65.1 : Providing and fixing ISI marked oxidised M S door latches conforming to IS : 5930 with screws etc.300x20x6 mm

9.66.1 : Providing and fixing ISI marked oxidised M.S. handles conforming to IS : 4992 with necessary screws etc. complete:125 mm

9.74.1 : Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete:250x10 mm

SANITARY FIXTURES &amp; CP FITTINGS

od262053/2020_2021 : Supply, installation, testing &amp; commissioning of the following Colour/White vitrious china Wall mounted European Water Closet (EWC) with C.P bolts, screws, washers, angle cock, flexible pipe, solid seat cover&amp; lid, waste pipe connection, concealed cistern, 15cm ledge wall@ 120cm height, etc. as applicable and complete including breaking and making good the wall and floor as per Architectural drawings and relevant Standards. (CERA, PARRYWARE, KHOLAR, HINDWARE or Equivalent)

od262057/2020_2021 : Supply, installation, testing &amp; commissioning of the following Colour/White vitrious china Floor mounted European Water Closet (EWC) with C.P bolts, screws, washers, angle cock, flexible pipe, solid seat cover&amp; lid, waste pipe connection, suitable cistern etc. as applicable and complete including breaking and making good the wall and floor as per Architectural drawings and relevant&lt;br&gt;Standards (CERA, PARRYWARE, KHOLAR, HINDWARE or Equivalent)

od264121/2020_2021 : Supply, installation, testing &amp; commissioning of the following Colour/White vitrious china Wash Basin with basin Pillar Tap, MS/SS brackets, 32mm C.P brass waste coupling, bottle trap, angle valve, flexible pipes, C.P bolts, screws, washers, etc. as applicable and complete including breaking and making good the wall and floor as per Architectural drawings and relevant Standards. Counter/Below counter type wash basin&lt;br&gt; (CERA, PARRYWARE, KHOLAR, HINDWARE or Equivalent)

od264122/2020_2021 : Supply, installation, testing &amp; commissioning of the following Colour/White vitrious china Wash Basin with basin Pillar Tap, MS/SS brackets, 32mm C.P brass waste coupling, bottle trap, angle valve, flexible pipes, C.P bolts, screws, washers, etc. as applicable and complete including breaking and making good the wall and floor as per Architectural drawings and relevant Standards. Wall Mounted/Flat back type wash basin with pedestal (CERA, PARRYWARE, KHOLAR, HINDWARE or Equivalent)

od264809/2020_2021 : Supply, installation and commisioining charges for Stainless steel single bowl Kitchen sink with drain board and Sink cock, CI/MS brackets, C.P brass waste coupling, bottle trap, angle valve, flexible pipes, C.P bolts, screws, washers, etc. as applicable and complete including breaking and making good the wall and floor/slab as per Architectural drawings and relevant Standards. (CERA, PARRYWARE, KHOLAR, HINDWARE or equivalent)

od277031/2020_2021 : Supply, installation and commisioining charges for 25 Litters storage type water heater with accessories like angle valve, flexible pipes, C.P bolts, screws, washers, etc. as applicable and complete including breaking and making good the wall and floor/slab as per Architectural drawings and relevant Standards.

od278902/2020_2021 : Supply, installation and commisioining charges for Shower System unit comprising of single lever shower diverter/mixer with upper trim, bath spout, casted type multi-flow shower head with wall/ceiliing flange and necessary fittings and complete including breaking and making good the wall and floor as per Architectural drawings and relevant standards.

od287119/2020_2021 : Supply, installation and commisioining C.P Health faucet with holder, one meter long flexible pipe, angle valve with wall flange and complete including breaking and making good the wall and floor as per Architectural drawings and relevant standards.( CERA, PARRYWARE, KHOLAR, HINDWARE or Equivalent)

od287459/2020_2021 : Supply, installation and commissioning charges for 15mm dia C.P angle valve with wall flange for water filter, dish washer, etc., including making good the wall as per Architectural drawings and as relevant standards.(ZOLOTO, RB, AUDCO or Equivalent)

od287575/2020_2021 : Supply, installation and commissioining charges for concealed stopcock including, accessories, bolts/screws,washers,etc. as applicable, complete including breaking and making good the wall as per Architectural drawings and as relevant standards.(JAQUAR, KHOLAR,or Equivalent)

od287692/2020_2021 : Supply, installation and commisioining charges for Toilet Paper Holder with flap including, accessories, bolts/screws, washers, etc. as applicable, complete including making good the wall as per Architectural drawings and as relevant standards.

od287966/2020_2021 : Supply, installation and commissioining charges for Soap Tray/dish including, accessories, bolts/screws, washers, etc. as applicable, complete including making good the wall as per Architectural drawings and as relevant standards.

od287967/2020_2021 : Supply, installation and commissioining charges for Towel Rail including, accessories, bolts/screws, washers,etc. as applicable, complete including making good the wall as per Architectural drawings and as relevant standards.

od287969/2020_2021 : Supply, installation and commissioning charges for Towel Ring including, accessories, bolts/screws, washers,etc. as applicable, complete including making good the wall as per Architectural drawings and as relevant standards. (JAQUAR, KHOLAR 0r Equivalent)

WATER SUPPLY

od287975/2020_2021 : Supply, installation, testing &amp; commissioning of water supply system pipe work including solvent welded/threaded fittings(tees, elbows, unions, reducers, coupling, etc.), GI &quot;U&quot; bolts, GI slotted rails, rail legs, accessories, etc. for supply riser, distribution risers, ring mains, suspended pipes, etc. with pipes and fittings as per UPVC schedule-40/80 suitable for working pressure of 20bars all in accordance with drawings and relevant standards. Above Ground/Open Piping - 15 mm dia (SUPREME, FINOLEX, ASTRAL, STAR OR EQUIVALENT)

od287976/2020_2021 : Supply, installation, testing &amp; commissioning of water supply system pipe work including solvent welded/threaded fittings(tees, elbows, unions, reducers, coupling, etc.), GI &quot;U&quot; bolts, GI slotted rails, rail legs, accessories, etc. for supply riser, distribution risers, ring mains, suspended pipes, etc. with pipes and fittings as per UPVC schedule-40/80 suitable for working pressure of 20bars all in accordance with drawings and relevant standards. Above Ground/Open Piping - 20 mm dia (SUPREME, FINOLEX, ASTRAL, STAR OR EQUIVALENT)

od288384/2020_2021 : Supply, installation, testing &amp; commissioning of water supply system pipe work including solvent welded/threaded fittings(tees, elbows, unions, reducers, coupling, etc.), GI &quot;U&quot; bolts, GI slotted rails, rail legs, accessories, etc. for supply riser, distribution risers, ring mains, suspended pipes, etc. with pipes and fittings as per UPVC schedule-40/80 suitable for working pressure of 20bars all in accordance with drawings and relevant standards. Above Ground/Open Piping - 25 mm dia (SUPREME, FINOLEX, ASTRAL, STAR OR EQUIVALENT)

od288474/2020_2021 : Supply, installation, testing &amp; commissioning of water supply system pipe work including solvent welded/threaded fittings(tees, elbows, unions, reducers, coupling, etc.), GI &quot;U&quot; bolts, GI slotted rails, rail legs, accessories, etc. for supply riser, distribution risers, ring mains, suspended pipes, etc. with pipes and fittings as per UPVC schedule-40/80 suitable for working pressure of 20bars all in accordance with drawings and relevant standards. Above Ground/Open Piping - 32 mm dia (SUPREME, FINOLEX, ASTRAL, STAR OR EQUIVALENT)

od288528/2020_2021 : Supply, installation, testing &amp; commissioning of water supply system pipe work including solvent welded/threaded fittings(tees, elbows, unions, reducers, coupling, etc.), GI &quot;U&quot; bolts, GI slotted rails, rail legs, accessories, etc. for supply riser, distribution risers, ring mains, suspended pipes, etc. with pipes and fittings as per UPVC schedule-40/80 suitable for working pressure of 20bars all in accordance with drawings and relevant standards. Above Ground/Open Piping - 40 mm dia (SUPREME, FINOLEX, ASTRAL, STAR OR EQUIVALENT)

od288580/2020_2021 : Supply, installation, testing &amp; commissioning of water supply system pipe work including solvent welded/threaded fittings(tees, elbows, unions, reducers, coupling, etc.), GI &quot;U&quot; bolts, GI slotted rails, rail legs, accessories, etc. for supply riser, distribution risers, ring mains, suspended pipes, etc. with pipes and fittings as per UPVC schedule-40/80 suitable for working pressure of 20bars all in accordance with drawings and relevant standards. Above Ground/Open Piping - 50 mm dia (SUPREME, FINOLEX, ASTRAL, STAR OR EQUIVALENT)

od288611/2020_2021 : Supply, installation, testing &amp; commissioning of water supply system pipe work including solvent welded/threaded fittings(tees, elbows, unions, reducers, coupling, etc.), GI &quot;U&quot; bolts, GI slotted rails, rail legs, accessories, etc. for supply riser, distribution risers, ring mains, suspended pipes, etc. with pipes and fittings as per UPVC schedule-40/80 suitable for working pressure of 20bars all in accordance with drawings and relevant standards. Above Ground/Open Piping - 65 mm dia (SUPREME, FINOLEX, ASTRAL, STAR OR EQUIVALENT)

od289244/2020_2021 : Supply, installation, testing &amp; commissioning of water supply system pipe work including solvent welded/threaded fittings(tees, elbows, unions, reducers, coupling, etc.), GI &quot;U&quot; bolts, GI slotted rails, rail legs, accessories, etc. for supply riser, distribution risers, ring mains, suspended pipes, etc. with pipes and fittings as per UPVC schedule-40/80 suitable for working pressure of 20bars all in accordance with drawings and relevant standards. Above Ground/Open Piping - 80 mm dia (SUPREME, FINOLEX, ASTRAL, STAR OR EQUIVALENT)

od289248/2020_2021 : Supply, installation, testing &amp; commissioning of water supply system pipe work including solvent welded/threaded fittings(tees, elbows, unions, reducers, coupling, etc.), GI &quot;U&quot; bolts, GI slotted rails, rail legs, accessories, etc. for supply riser, distribution risers, ring mains, suspended pipes, etc. with pipes and fittings as per UPVC schedule-40/80 suitable for working pressure of 20bars all in accordance with drawings and relevant standards. Above Ground/Open Piping - 100 mm dia (SUPREME, FINOLEX, ASTRAL, STAR OR EQUIVALENT)

od289267/2020_2021 : Supply, Installation, testing and commissioning of water supply system pipe work for internal/concealed lines for cold water supply in toilets, wash areas etc including solvent welded pipe fittings (tees, elbows, unions, reducers, coupling, etc.) clambed inposition, accessories, supports brackets, bolts accessories and chasing the wall and floor where ever necessary and making goodthe wall after installation, with pipes and fittings of CPVC SDR-11 for working pressure of 15 bars all in accordance with drawings and relevant standards.Pipes for internal cold and Hot water distribution (ASHIRWAD, AJAY, AJIRAL)-15 mm dia

od289405/2020_2021 : Supply, Installation, testing and commissioning of water supply system pipe work for internal/concealed lines for cold water supply in toilets, wash areas etc including solvent welded pipe fittings (tees, elbows, unions, reducers, coupling, etc.) clambed inposition, accessories, supports brackets, bolts accessories and chasing the wall and floor where ever necessary and making goodthe wall after installation, with pipes and fittings of CPVC SDR-11 for working pressure of 15 bars all in accordance with drawings and relevant standards.Pipes for internal cold and Hot water distribution (ASHIRWAD, AJAY, AJIRAL)-20 mm dia

od289419/2020_2021 : Supply, Installation, testing and commissioning of water supply system pipe work for internal/concealed lines for cold water supply in toilets, wash areas etc including solvent welded pipe fittings (tees, elbows, unions, reducers, coupling, etc.) clambed inposition, accessories, supports brackets, bolts accessories and chasing the wall and floor where ever necessary and making goodthe wall after installation, with pipes and fittings of CPVC SDR-11 for working pressure of 15 bars all in accordance with drawings and relevant standards.Pipes for internal cold and Hot water distribution (ASHIRWAD, AJAY, AJIRAL)-25 mm dia

od289674/2020_2021 : Supply, Installation, testing and commissioning of water supply system pipe work for internal/concealed lines for pipes for hot water supply in toilets, wash areas etc including solvent welded pipe fittings (tees, elbows, unions, reducers, coupling, etc.) clambed inposition, accessories, supports brackets, bolts accessories and chasing the wall and floor where ever necessary and making goodthe wall after installation, with pipes and fittings of CPVC SDR-11 for working pressure of 15 bars all in accordance with drawings and relevant standards.Pipes pipes for hot water (ASHIRWAD, AJAY, AJIRAL)-15 mm dia

od289679/2020_2021 : Supply, Installation, testing and commissioning of water supply system pipe work for internal/concealed lines for pipes for hot water supply in toilets, wash areas etc including solvent welded pipe fittings (tees, elbows, unions, reducers, coupling, etc.) clambed inposition, accessories, supports brackets, bolts accessories and chasing the wall and floor where ever necessary and making goodthe wall after installation, with pipes and fittings of CPVC SDR-11 for working pressure of 15 bars all in accordance with drawings and relevant standards.Pipes pipes for hot water (ASHIRWAD, AJAY, AJIRAL)-20 mm dia

od289689/2020_2021 : Supply, Installation, testing and commissioning of water supply system pipe work for internal/concealed lines for pipes for hot water supply in toilets, wash areas etc including solvent welded pipe fittings (tees, elbows, unions, reducers, coupling, etc.) clambed inposition, accessories, supports brackets, bolts accessories and chasing the wall and floor where ever necessary and making goodthe wall after installation, with pipes and fittings of CPVC SDR-11 for working pressure of 15 bars all in accordance with drawings and relevant standards.Pipes pipes for hot water (ASHIRWAD, AJAY, AJIRAL)-25 mm dia

od289911/2020_2021 : Supply, Installation, testing and commissioning of water supply system pipe work for internal/concealed lines for pipes for hot water supply in toilets, wash areas etc including solvent welded pipe fittings (tees, elbows, unions, reducers, coupling, etc.) clambed inposition, accessories, supports brackets, bolts accessories and chasing the wall and floor where ever necessary and making goodthe wall after installation, with pipes and fittings of CPVC SDR-11 for working pressure of 15 bars all in accordance with drawings and relevant standards.Pipes pipes for hot water (ASHIRWAD, AJAY, AJIRAL)-32 mm dia

od289920/2020_2021 : Supply, Installation, testing and commissioning of water supply system pipe work for internal/concealed lines for pipes for hot water supply in toilets, wash areas etc including solvent welded pipe fittings (tees, elbows, unions, reducers, coupling, etc.) clambed inposition, accessories, supports brackets, bolts accessories and chasing the wall and floor where ever necessary and making goodthe wall after installation, with pipes and fittings of CPVC SDR-11 for working pressure of 15 bars all in accordance with drawings and relevant standards.Pipes pipes for hot water (ASHIRWAD, AJAY, AJIRAL)-40mm dia

od289924/2020_2021 : Supply, Installation, testing and commissioning of water supply system pipe work for internal/concealed lines for pipes for hot water supply in toilets, wash areas etc including solvent welded pipe fittings (tees, elbows, unions, reducers, coupling, etc.) clambed inposition, accessories, supports brackets, bolts accessories and chasing the wall and floor where ever necessary and making goodthe wall after installation, with pipes and fittings of CPVC SDR-11 for working pressure of 15 bars all in accordance with drawings and relevant standards.Pipes pipes for hot water (ASHIRWAD, AJAY, AJIRAL)-50mm dia

TRANSFER PUMPSETS

od290019/2020_2021 : Supply , installation, testing &amp; commissioning of Water lifting pump, with pumps (2 nos on a 1duty + 1 standby basis) with control panel,automatic changover switch, with all necessary valves, flexible connections, pressure gauges, strainers, supports, fixings and fittings electrical/ control panels, power and control cabling , cable trays, automatic level controller, etc. as specified and as shown on drawings and complying to relevant standards. COLD WATER LIFTING PUMP (Well to UG Tank) Duty conditions:-380 LPM @ 40 M Head (One Duty + One standby) (WTP-01/02 ) (KIRLOSKAR, CROMPTON, V-GARD or Equivalent)

od290056/2020_2021 : Supply , installation, testing &amp; commissioning of Water lifting pump, with pumps (2 nos on a 1duty + 1 standby basis) with control panel,automatic changover switch, with all necessary valves, flexible connections, pressure gauges, strainers, supports, fixings and fittings electrical/ control panels, power and control cabling , cable trays, automatic level controller, etc. as specified and as shown on drawings and complying to relevant standards. COLD WATER LIFTING PUMP (UG Tank to OH Tank)- Duty conditions:-250 LPM @ 35 M Head (One Duty + One standby) (WTP-03/04 ) KIRLOSKAR, CROMPTON, V-GARD

BOOSTER PUMP SETS

od290192/2020_2021 : Supply, storage, installation, testing &amp; commissioning of VFD operated Water boosting pump system ,with pumps (2 nos on a 1duty + 1 standby basis) with control panel,pressure vessel, automatic changover switch, VFD control panel with all necessary valves, strainer, flexible connections, pressure gauges, supports, fixings and fittings electrical/ control panels, power and control cabling , cable trays etc as specified and as shown on drawings and complying to relevant standards.COLD WATER BOOSTING PUMP Duty conditions:-2.50 LPS @ 15 M Head (One Duty + One Assist + One Standby) (BWSP-01~03 ) With pressure vessel (KIRLOSKAR, CROMPTON, V-GARD)

VALVES

od290210/2020_2021 : Supply, installation, testing and commissioning of fullway lever operated brass valves with brass body with necessary MTA fittings with all supports, flanges, fixings and fittings all as specified and as shown on drawings and complying to relevant&lt;br&gt;standards - 15 mm dia lever operated Ball Valve (ZOLOTO, RB, AUDCO or Equivalent)

od290211/2020_2021 : Supply, installation, testing and commissioning of fullway lever operated brass valves with brass body with necessary MTA fittings with all supports, flanges, fixings and fittings all as specified and as shown on drawings and complying to relevant&lt;br&gt;standards - 20 mm dia lever operated Ball Valve (ZOLOTO, RB, AUDCO or Equivalent)

od290212/2020_2021 : Supply, installation, testing and commissioning of fullway lever operated brass valves with brass body with necessary MTA fittings with all supports, flanges, fixings and fittings all as specified and as shown on drawings and complying to relevant&lt;br&gt;standards - 25 mm dia lever operated Ball Valve (ZOLOTO, RB, AUDCO or Equivalent)

od290213/2020_2021 : Supply, installation, testing and commissioning of fullway lever operated brass valves with brass body with necessary MTA fittings with all supports, flanges, fixings and fittings all as specified and as shown on drawings and complying to relevant&lt;br&gt;standards - 32 mm dia lever operated Ball Valve (ZOLOTO, RB, AUDCO or Equivalent)

od290214/2020_2021 : Supply, installation, testing and commissioning of fullway lever operated brass valves with brass body with necessary MTA fittings with all supports, flanges, fixings and fittings all as specified and as shown on drawings and complying to relevant&lt;br&gt;standards - 40 mm dia lever operated Ball Valve (ZOLOTO, RB, AUDCO or Equivalent)

od290215/2020_2021 : Supply, installation, testing and commissioning of fullway lever operated brass valves with brass body with necessary MTA fittings with all supports, flanges, fixings and fittings all as specified and as shown on drawings and complying to relevant&lt;br&gt;standards - 50 mm dia lever operated Ball Valve (ZOLOTO, RB, AUDCO or Equivalent)

DRAINAGE SYSTEM

od290271/2020_2021 : Supply, installation, testing and commissioning of waste and soil pipes conforming to IS 13592 Class B for 75mm dia and above, &amp; 6kg/sqcm pipes for pipes below 75mm dia and IS 13592 Class A pipes for rain water &amp; vent piping including necessary fittings and accessories clamped in position &amp; jointing with O-rings, supports, brackets,etc. for above the ground installation(shafts/suspended) all inaccordance with the drawings and specification. Pipe supporting/ Clamping details:- For vertical shaft piping, pipes shall be clamped/supported by using 8mm GI &quot;U&quot; bolts to heavy duty GI slotted (2.5mm) rails&amp; rail legs. For suspended piping, pipes shall be clamped/supported by using 8mm GI &quot;U&quot; bolts to heavy duty GI slotted rails(2.5mm) &amp; slotted rails shall be suspended using 10mm threaded road, 10mm angle fastner, nuts &amp; washers to the slab. Shaft &amp; suspended Piping - 40 mm dia (SUPREME, FINOLEX, ASTRAL, STAR OR EQUIVALENT)

od290272/2020_2021 : Supply, installation, testing and commissioning of waste and soil pipes conforming to IS 13592 Class B for 75mm dia and above, &amp; 6kg/sqcm pipes for pipes below 75mm dia and IS 13592 Class A pipes for rain water &amp; vent piping including necessary fittings and accessories clamped in position &amp; jointing with O-rings, supports, brackets,etc. for above the ground installation(shafts/suspended) all inaccordance with the drawings and specification. Pipe supporting/ Clamping details:- For vertical shaft piping, pipes shall be clamped/supported by using 8mm GI &quot;U&quot; bolts to heavy duty GI slotted (2.5mm) rails&amp; rail legs. For suspended piping, pipes shall be clamped/supported by using 8mm GI &quot;U&quot; bolts to heavy duty GI slotted rails(2.5mm) &amp; slotted rails shall be suspended using 10mm threaded road, 10mm angle fastner, nuts &amp; washers to the slab. Shaft &amp; suspended Piping - 50 mm dia (SUPREME, FINOLEX, ASTRAL, STAR OR EQUIVALENT)

od290273/2020_2021 : Supply, installation, testing and commissioning of waste and soil pipes conforming to IS 13592 Class B for 75mm dia and above, &amp; 6kg/sqcm pipes for pipes below 75mm dia and IS 13592 Class A pipes for rain water &amp; vent piping including necessary fittings and accessories clamped in position &amp; jointing with O-rings, supports, brackets,etc. for above the ground installation(shafts/suspended) all inaccordance with the drawings and specification. Pipe supporting/ Clamping details:- For vertical shaft piping, pipes shall be clamped/supported by using 8mm GI &quot;U&quot; bolts to heavy duty GI slotted (2.5mm) rails&amp; rail legs. For suspended piping, pipes shall be clamped/supported by using 8mm GI &quot;U&quot; bolts to heavy duty GI slotted rails(2.5mm) &amp; slotted rails shall be suspended using 10mm threaded road, 10mm angle fastner, nuts &amp; washers to the slab. Shaft &amp; suspended Piping - 75 mm dia (SUPREME, FINOLEX, ASTRAL, STAR OR EQUIVALENT)

od290274/2020_2021 : Supply, installation, testing and commissioning of waste and soil pipes conforming to IS 13592 Class B for 75mm dia and above, &amp; 6kg/sqcm pipes for pipes below 75mm dia and IS 13592 Class A pipes for rain water &amp; vent piping including necessary fittings and accessories clamped in position &amp; jointing with O-rings, supports, brackets,etc. for above the ground installation(shafts/suspended) all inaccordance with the drawings and specification. Pipe supporting/ Clamping details:- For vertical shaft piping, pipes shall be clamped/supported by using 8mm GI &quot;U&quot; bolts to heavy duty GI slotted (2.5mm) rails&amp; rail legs. For suspended piping, pipes shall be clamped/supported by using 8mm GI &quot;U&quot; bolts to heavy duty GI slotted rails(2.5mm) &amp; slotted rails shall be suspended using 10mm threaded road, 10mm angle fastner, nuts &amp; washers to the slab. Shaft &amp; suspended Piping - 110 mm dia (SUPREME, FINOLEX, ASTRAL, STAR OR EQUIVALENT)

od290275/2020_2021 : Supply, installation, testing and commissioning of waste and soil pipes conforming to IS 13592 Class B for 75mm dia and above, &amp; 6kg/sqcm pipes for pipes below 75mm dia and IS 13592 Class A pipes for rain water &amp; vent piping including necessary fittings and accessories clamped in position &amp; jointing with O-rings, supports, brackets,etc. for above the ground installation(shafts/suspended) all inaccordance with the drawings and specification. Pipe supporting/ Clamping details:- For vertical shaft piping, pipes shall be clamped/supported by using 8mm GI &quot;U&quot; bolts to heavy duty GI slotted (2.5mm) rails&amp; rail legs. For suspended piping, pipes shall be clamped/supported by using 8mm GI &quot;U&quot; bolts to heavy duty GI slotted rails(2.5mm) &amp; slotted rails shall be suspended using 10mm threaded road, 10mm angle fastner, nuts &amp; washers to the slab. Shaft &amp; suspended Piping - 160 mm dia (SUPREME, FINOLEX, ASTRAL, STAR OR EQUIVALENT)

od290276/2020_2021 : Supply, installation, testing and commissioning of waste and soil pipes conforming to IS 13592 Class B for 75mm dia and above, &amp; 6kg/sqcm pipes for pipes below 75mm dia and IS 13592 Class A pipes for rain water &amp; vent piping including necessary fittings and accessories clamped in position &amp; jointing with O-rings, supports, brackets,etc. for above the ground installation(shafts/suspended) all inaccordance with the drawings and specification. Pipe supporting/ Clamping details:- For vertical shaft piping, pipes shall be clamped/supported by using 8mm GI &quot;U&quot; bolts to heavy duty GI slotted (2.5mm) rails&amp; rail legs. For suspended piping, pipes shall be clamped/supported by using 8mm GI &quot;U&quot; bolts to heavy duty GI slotted rails(2.5mm) &amp; slotted rails shall be suspended using 10mm threaded road, 10mm angle fastner, nuts &amp; washers to the slab. Shaft &amp; suspended Piping - 110 mm dia for rain water (SUPREME, FINOLEX, ASTRAL, STAR OR EQUIVALENT)

od290277/2020_2021 : Supply, installation, testing and commissioning of waste and soil pipes conforming to IS 13592 Class B for 75mm dia and above, &amp; 6kg/sqcm pipes for pipes below 75mm dia and IS 13592 Class A pipes for rain water &amp; vent piping including necessary fittings and accessories clamped in position &amp; jointing with O-rings, supports, brackets,etc. for above the ground installation(shafts/suspended) all inaccordance with the drawings and specification. Pipe supporting/ Clamping details:- For vertical shaft piping, pipes shall be clamped/supported by using 8mm GI &quot;U&quot; bolts to heavy duty GI slotted (2.5mm) rails&amp; rail legs. For suspended piping, pipes shall be clamped/supported by using 8mm GI &quot;U&quot; bolts to heavy duty GI slotted rails(2.5mm) &amp; slotted rails shall be suspended using 10mm threaded road, 10mm angle fastner, nuts &amp; washers to the slab. Shaft &amp; suspended Piping - 75 mm dia for vent pipe (SUPREME, FINOLEX, ASTRAL, STAR OR EQUIVALENT)

MANHOLE &amp;COVERS

od290622/2020_2021 : Suppy , constructing sewer manholes with&lt;br&gt;20cm thick brick walls in cement mortar 1:6, plastering inside &amp; outside with cement mortar 1:3, 12mm thick with neat cement flushing coat and foundation concrete 20cm thick and forming channels with cement concrete 1:3:6 using 40mm broken stone, providing collars around pipes with cement concrete 1:2:4 using&lt;br&gt;20mm broken stone, corbels at top courses on two sides and R.C.C slab of 15cm thick with cement concrete 1:2:4 using 20cm broken stone and necessary reinforcement and providing necessary provision for fixing hinged type ductile iron manhole cover, its frame and C.I step as per relevant standards and specifications 60X60cm internal diamention &amp; 1.2m average depth manholes with hinged type manhole covers &amp; frames confirming to relevant IS standerds

od290623/2020_2021 : Suppy , constructing sewer manholes with&lt;br&gt;20cm thick brick walls in cement mortar 1:6, plastering inside &amp; outside with cement mortar 1:3, 12mm thick with neat cement flushing coat and foundation concrete 20cm thick and forming channels with cement concrete 1:3:6 using 40mm broken stone, providing collars around pipes with cement concrete 1:2:4 using&lt;br&gt;20mm broken stone, corbels at top courses on two sides and R.C.C slab of 15cm thick with cement concrete 1:2:4 using 20cm broken stone and necessary reinforcement and providing necessary provision for fixing hinged type ductile iron manhole cover, its frame and C.I step as per relevant standards and specifications- 45X45cm internal diamention &amp; 0.6m average depth manholes with hinged type manhole covers &amp; frames confirming to relevant IS standerds

GULLY TRAP

od290624/2020_2021 : Supply, installation, testing and commissioning of PVC gylly trap of size 160X110mm embedded in PCC of 1:4:8 using 20mm broken stone, all the above encased in a 115mm thick chamber of size 300X300 constructed using brick with ciment mortar 1:3, 100mm thick cement concrete of 1:4;8 using 40mm&lt;br&gt;broken stones, plastering inside, outside &amp; exposed surfaces with cement mortar 1:3, 12mm thick and finished with a floating coat of neat cement. Providing and fixing hinged type ductile iron manhole&lt;br&gt;cover &amp; frame of size 300X300 in PCC of 1:2:4 using 20mm broken stones including two coat of black bitumastic paiting of cover &amp; frame as per relevant stanards and specifications

Meena Mamu

Bidder Name

Meena Mamu

NALAKATH INFRASTRUCTURE LLP