REPAIRS MAINTENANCE WORKS TO FLOOR WALL ROOF SANITARY FITTINGS JOINERIES AND CERTAIN OTHER ITEMS FOR OTM SINGLE LIVING ACCOMODATIONS AND HANGARS IN G AREA AT NAVAL BASE KOCHI UNDER GE NW KOCHI

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding, (but not backing) removing serviceable tiles to store and rubbish of premises complete all as specified and directed.

M&L Non - Skid coloured Ceramic tiles 7 to 8 mm thick (Square/ Rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick screed in Cement Mortar 1:4, complete all as specified.

M&L Ceramic tiles coloured, light shade, 7 to 8 mm thick, area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick screed in Cement Mortar 1:4, complete all as specified.

M&L for Glazed ceramic tiles coloured , as in vertical surfaces, size 350x 250x 7 mm/450 x 350 x 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles including 10 mm thick backing coat in Cement Mortar 1:4, complete all as specified and directed.

M&L for Vitrified ceramic tiles, light shade, 10 mm thick (Square / Rectangular), polished, area of each tile not exceeding 0.36 Sqm, laid in floors etc. set & jointed in neat cement slurry & pointed in white or coloured cement to match, including 15 mm thick Screed bed or bedding layer in Cement Mortar 1: 4, complete all as specified and as directed by Engineer in Charge.

M&L for Vitrified ceramic tiles, light shade, 10 mm thick, (Square / Rectangular), polished, area of each tile not exceeding 0.36 Sqm, laid on vertical surfaces/ skirting etc. set & jointed in neat cement slurry & pointed in white or coloured cement to match vertical surfaces with backing coat of 10mm thick in Cement Mortar 1:4, complete all as specified and as directed.

M&L for pre polished Machine cut Kota Stone slab flooring, 20-25mm thick, over 20 mm thick Screed bed or bedding layer in Cement Mortar 1: 4, laid and jointed with grey cement slurry, mixed with pigment to match the shade of the slab complete all as specified and as directed by Engineer in Charge.

M&L for Granite (of any type) tiles, 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with mixture of pigment to match the shade of granite stone, including grinding and polishing, over 20mm thick cement screed in Cement Mortar 1:4, complete all as specified and as directed by Engineer in Charge.

Demolition of Cement Concrete of any description and in any position not otherwise specifically provided for, complete all as specified and as directed by Engineer in Charge.

M&L for 40mm thick PCC 1:2:4, Type B-0 (using 12.5mm graded aggregate) as in repair top surface of pavement and flooring etc. and surface finished even and smooth without using extra cement complete all as specified and as directed by Engineer in Charge.

Demolition of Plain Cement Concrete in ground floors and pavings not exceeding 15 Cm thickness (below or above ground level) complete all as specified and as directed.

M&L for 100 mm thick Plain Cement Concrete 1:4:8, Type D-2, (40 mm graded aggregate) as in sub base to floor, complete all as specified and directed.

M&L for 75mm thick Plain Cement Concrete 1:4:8, Type D-2, (40 mm graded aggregate) as in sub base to floor, complete all as specified and as directed by Engineer in Charge.

M&L for Hard core of Gauge exceeding 63mm but not exceeding 150mm, deposited, spread and levelled in layers not exceeding 15cm thick, watered and rolled/ rammed to a true surface, complete all as specified and as directed by Engineer in Charge.

M&L for 75 mm thick Plain Cement Concrete 1:3:6, Type C-1, (20mm graded stone aggregate) as in plinth protection and finished the surface even and fair without using extra cement, complete all as specified and directed.

M&L for Chequered cement concrete tiles, 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry with grey pigment cement and pigments in floors over and including 20 mm thick screed bed in Cement Mortar 1:4 including dismantling of old tiles, complete all as specified and directed.

S&F anodised aluminium snap grid false ceiling comprising of 4mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/ GI/ Aluminium framework with stainless steel screws; having grid of size 605mmx605mm, including hangers 6 mm dia. GI (up to 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flats 40 x 3 mm size 60 mm long & expansion hold fasteners 12.5 mm dia. 40 mm long and including Dismantling ceiling boards any thickness, including cover fillets, complete all as specified and directed.

S&F in repair, 12mm Perforated particle board/ tiles for insulation and acoustic purposes, 60cm x 60cm in size, fixed with nails to timber framework or with staples on snap grid frame work complete all as specified and as directed.

M&L for one coat of white washing to new ceiling surfaces including preparation of surfaces complete all as specified.

Dismantling timber scantlings 40 Sq. cm and over in section, in any position complete all as specified and as directed.

M&L for second class hard wood scantling, clean sawn, 40 Sq. cm and over in section, in framed work, complete all as specified and as directed.

Dismantling timber framed work scantlings under 40 Sqcm in section, in fillets, rails, posts, rafters, purlins etc., complete all as specified and as directed.

M&L for second class hard wood plain fillets, square, rectangular, any section, clean sawn, secured with nails or brads, sectional area exceeding 6 Sq. cm and not exceeding 13 Sq. cm, complete all as specified and as directed.

M&L for second class hard wood plain fillets, square, rectangular, any section, clean sawn, secured with nails or brads, sectional area exceeding 13 Sq. cm and not exceeding 25 Sq cm, complete all as specified and as directed.

M&L for preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with creosote complete all as specified and as directed.

Dismantling boarding of any description, fixed in any position with nails, complete all as specified and as directed.

M&L for 4mm thick ACP sheet as in ceiling and eaves board, including cutting and fixing with screw and 40x40x2mm MS Tubes, complete all as specified and as directed .

Dismantling single layer Mangalore pattern or similar tiles in roofing complete all as specified and as directed.

Dismantling tile battens of any size including tiling fillets spaced exceeding 15 cm centre to centre complete all as specified and as directed.

S&F second class hard wood clean swan battens for tiles, fixed at 30 cm centre to centre, Sectional area exceeding 5 Sq. cm and not exceeding 15 Sq. cm complete all as specified and as directed.

All as per Item No. 30 herein above, but fixing only battens complete all as specified and as directed. Note : Battens sobtained from dismantling hall be reused .

M&L for preparing surface of tiles or slate battens, any size and spacing, prepared and treated all over with creosote complete all as specified and as directed.

M&L for roof tiles, Mangalore pattern, interlocking at side joints, laid dry, complete all as specified and as directed.

All as per Item No. 33 herein above, but except tiles, complete all as specified and as directed. Note : Tiles obtained from dismantling shall be reused.

M&L for ridge or hip tiles to suit Mangalore pattern of roofing tiles, bedded and jointed in Cement Mortar 1:6, complete all as specified and as directed.

All as per Item No. 35 herein above, but except tiles, complete all as specified and as directed. Note : Tiles obtained from dismantling shall be used.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or re-fixing or removal to store complete all as specified and as directed. Note : Measured overall as fixed along the centre line over fittings and accessories.

S&F EURO GUARD PRO Square UPVC Rainwater Gutter (220 mm), with all necessary fittings, clamp, joints, end cap, corner drop, centre drop, etc., joining compounds, nut, bolts or screws etc., at any height, complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) Pipes, single socketed in any length with rubber ring joints, fixed to walls complete all as specified and as directed. Note : Jointing shall be done with solvent cement.

S&F 110mm bore PVC (SWR) bends, any radius, complete all as specified and as directed.

S&F PVC eaves gutter 180mm dia., semi circular with all necessary fittings, joining compounds, clamps, nut, bolts or screws etc., and fixing in position, up to a height of 12 metres, complete all as specified and directed.

S&F 180mm bore PVC (SWR) Rain Water Pipes, with all necessary fittings (except bend), joining compounds, clamps, nut, bolts or screws etc. and fixing in position, up to a height of 12 metres, complete all as specified and directed.

S&F 180mm bore PVC (SWR) bends, any radius, fixed with rubber ring joints, up to a height of 12 metres, complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting, any gauge and thickness, including nainital or similar pattern roof covering, complete all as specified and as directed.

S&F 0.71 mm thick, aluminium sheeting, alloy 31000 H4, in ridge, hip, valley gutter, drip and straight flashing (length and girth as fixed), complete all as specified and as directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet, 0.50mm thick of any colour, having tensile strength of 550MPa as in roof covering/ cladding to wall, fixed with self tapping screws, complete all as specified and as directed.

S&F Pre-painted galvalume aluminium zinc coating GI based Plain sheet, 0.50mm thick of any colour, having tensile strength of 550MPa, as in roof covering/ cladding, fixed with screws, all as specified and as directed.

M&L for 2 mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with L type or J type or cranked hook bolts in roof and wall, complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, all as specified.

S&F Roof Trusses (framed) confirming to Fe 410W, trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, Tee, Angle, Channel or Flat sections) including distance pieces, cleats etc., complete all as specified and as directed by Engineer in Charge.

Cleaning vegetation growth over MP tiled roof, RCC roof, chajja etc., up to fourth storey, including removal of vegetation outside MD land complete all as specified and as directed by Engineer in Charge.

Taking down existing water proofing treatment from the roof including cement mortar, removing debris off the premises and cleaning the roof, complete all as specified.

M&L for 10 mm thick rendering with Cement Mortar 1:3, with WPC 3 % by weight of cement, over and incl neat cement slurry with 3.0 Kg of cement per Sq. metre complete all as specified. Note : WPC shall be measured and paid separately.

M&L for Water Proofing Treatment by applying oil bound bituminous primer 0.20 Kg/ Sqm, providing and laying 4 mm thick APP modified water proofing membrane weighing not less than 4 Kg/ Sqm, reinforced with non-woven polyester matt not less than 160 g/ Sqm, having softening point not less than 1400 C, longitudinal tensile strength not less than 650 N/Sqcm, tearing strength of 180 N by torque application including minimum 10 cm side overlap and 15 cm end lap and applying a coat of blown grade hot bitumen 85/25 conforming to IS : 702 heated to a working temp of 180 degree and applied @1.2 Kg/Sqm, finishing the surface with solar reflective bituminous aluminium paint @ 100 g/ Sqm, complete all as specified and as directed by Engineer in Charge and as per manufacturer's instructions.

Supply only Liquid Water Proofing Compound, complete all as specified and as directed by Engineer in Charge.

Taking down loose/ damaged concrete including plaster of any description and in any positions from RCC structure like slab, columns and beams etc., from any location and in any position up to fifth storied buildings by hammering with wooden mallets carefully, chipping of concrete surfaces and cleaning of old concrete with necessary scaffolding and protection as required as directed.

Cutting old reinforcement at required level, separating complete all as specified and directed by Engineer in Charge. Note : Demolition of concrete will be measured separately.

Providing, fabricating and fixing reinforcement steel of TMT bars of specified diameter around the column, beams, slab etc. and tied/ tack welded to shear connectors as per direction by Engineer in Charge, all as specified.

M&L for cleaning and removal of rusted particles from reinforcement of any diameter using wire brush/ emery paper or by grinding and applying Anticorrosive chemical from M/s BASF/ FOSROC/ STP or equivalent, as specified and directed by Engineer in Charge.

Providing and applying bond coat on the prepared concrete surfaces to receive new polymer modified concrete (micro concrete), using two component epoxy based bond coat MASTER Brace 1414 of BASF/ Nitobond EP of FOSROC/ Fitbond EA of Conmix in one full coat complete as per specifications and as directed. Note 1 : Laying of reinforcement polymer modified concrete shall be completed within the overlay time of bond coat. This bond coat acts as a bonding agent between old and new concrete. Note 2 : The unit rate quoted is deemed to be inclusive of bond coat, micro concrete including all materials and labour, supervision, tools and tackles and transportation etc.

Providing, fixing and removing after use of water tight shuttering (form work) using film coated 12 mm thick plywood sheets for micro-concreting the columns/ beams/ slabs in line and level with proper support, complete as per specifications and as directed. Note : The unit rate quoted is deemed to be inclusive of materials, all labour, supervision, tools and tackles and transportation etc.

M&L chipping off the disintegrated concrete of sunken slabs & sides of concrete structures and clean the area with wire brush and coir brush, seal the disturbed area with polymer modified mortar using approved make including the following: 1. Coving at all the corners with polymer modified mortar. 2. Sealing all the plumbing line sand holes with non shrink grout of make M/s BASF/ Fosroc/ IWL/ STP Ltd or Equivalent. 3. Replacing all pipes by PVC pipes and shall be placed properly in position. 4. Keep the water on sunken tanks and floors for 24 hours for observing the leakages and to ensure water tightness. 5. Pressure grouting at all the damaged areas/ joints with water proofing admixture. 6. Water proof the area with Acrylic polymer modified water proofing coating , Brush bond RFX or equivalent in two coats. Note : Water proofing products shall conform to M/s BASF/ Fosroc Chemicals/ IWL/ STP Ltd or Equivalent.

M&L for mild steel rolled sections confirming to Fe 410 -W (Gde-E- 250) quality- A as in main and cross beams, hip and jack rafters; and purlins where connected to common rafters fixed with angle cleats or other connecting plates complete all as specified and directed.

M&L for mild steel rolled sections confirming to Fe 410 -W (Gde-E- 250) quality- A framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc. complete, drilled for fixing of steel sheet in or other covering doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel door fitting and also fastening, complete all as specified and directed.

Dismantling of Hangar door shutter carefully and re-erecting in position, including structural steel members such as channels, angle iron, flat iron, beams etc. and steel section of any description; area of shutter not exceeding 40 Sqm and applying one coat of synthetic enamel paint, complete all as specified and directed.

Removal of existing wheel iron bottom of hanger doors, including replacing of its bearing if necessary and re-fixing the same in the door all as directed, including cutting/ welding, greasing, oiling etc. complete all as specified and as directed.

Removal of existing wheel iron/ brass top of hanger doors, including replacing of its bearing if necessary and re-fixing the same in the door all as directed, including cutting/ welding, greasing, oiling etc. complete all as specified and as directed.

M&L for cleaning of rolling shutters and applying greasing on steel surfaces in side channels for smooth functioning of all steel members, complete all as specified and directed.

M&L for preparation of new steel surfaces of any description up to a height of 15 metres, over 10 cm in width or girth not otherwise described and applying two coats of epoxy coated paint over one coat of epoxy primer, complete all as specified and directed.

M&L for preparation of old steel surfaces of any description up to a height of 15 metres, over 10 cm in width or girth not otherwise described and applying one coat of epoxy coated paint over one coat of epoxy primer, complete all as specified and directed.

Dismantling expanded metal any thickness or mesh, fixed with steel or aluminium frame work if any, weight not exceeding 4 Kg per Sqm, including frame work, complete all as specified and directed.

S&F interlocking aluminium alloy anodized snap grid false ceiling consisting of main Tee runners of size 38mm x 25mm x 1.5mm, spaced at 1200mm centre to centre and cross Tee of size 25mm x 25mm x 1.5mm, 1200mm long spaced between the main Tee at 600mm centre to centre to form a grid of 1200mm x 600mm and provide a secondary cross Tee 25mm x 25mm x 1.5 mm (of length 600mm) to be interlocked at the centre of 1200mm x 600mm panel to form a grid of 600mm x 600mm and wall angle 25x25x2mm. Aluminium alloy extruded section shall be aluminium anodized (minimum 15 micron) and shall conform to IS-733, IS-1285 and IS-737 including GI hangers 6 mm dia (up to 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flats 40x3mm size 60 mm long and expansion hold fasteners 12.5mm dia. 40mm long, complete all as specified and directed.

S&F in repairs, wire netting of stainless steel wire 1.4 mm dia. and 25 mm x 25 mm mesh size, fixed to snap grid frame work as in bird proofing and securing with aluminium angle cleat of size 12 mm x 12 mm x 1.4 mm with two rivets or 1mm dia. copper wire, complete all as specified and as directed by Engineer in Charge.

Supply and fixing in repairs, Aura 500 mm dia. Turbo Ventilator made out of Aluminium, with Fluro Carbon coating and having additional fan leaves for efficient removal of warm and stale air, with high quality Japanese NSK bearing No. 6201z &6202z with suitable base plate made out of aluminium and suitable for installing on metal sheet and aluminium sheets including cutting and making holes of required size on existing roof for fitting the same or similar work, to reach the height up to 20 metres etc., complete all as specified and as directed.

M&L for preparing old painted surface of wood or wood based surface of any description over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.

M&L for preparing old painted steel and iron surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed.

Removal of vegetation/ shrub growth over walls, roof chajja, gutter up to fourth storey buildings, cleaning the surface and spraying acid of required concentration and quantity making good holes with Cement Mortar 1:3 or Cement Concrete 1:3:6, Type C-1, each hole not exceeding 0.10 Sqm area, including necessary scaffolding etc., complete all as specified and as directed.

M&L for preparation of old decorated surface of walls including cornices (Plastered or unplastered) and applying one coat of Apex Ultima Protek top coat, complete all as specified and as directed.

M&L for complete removal of existing treatment from wall and applying two coats of antifungal paint over a coat of primer, complete all as specified and as directed.

M&L for one coat of brushbond TGP crystalline capillary water proofing system for cementitious substrates for water proofing against the positive or negative sides of wall for damp proofing, repairing cracks, plugging holes and stopping active leakages, complete all as specified and directed.

M&L for preparation of old painted steel and iron surfaces of any description over 10cm width or girth and applying one coat of epoxy anticorrosive paint over a coat of primer for truss work, up to a height of 15 Metres, complete all as specified and as directed.

Taking down chowkats with shutters (without taking off shutters from the frame) not exceeding 1.5 Sqm, complete all as specified and directed.

Taking down chowkats with shutters (without taking off shutters from the frame) exceeding 1.5 Sqm, but not exceeding 4 Sqm, complete all as specified and directed.

Taking down shutters of any description, area not exceeding 1 Sqm each, complete all as specified and directed.

All as per Item No. 84 here in before, but exceeding 1.00 Sqm and not exceeding 2.00 Sqm, complete all as specified and directed.

Taking down shutter of any description not exceeding 1.00 Sqm including re-securing or easing and adjusting and re-fixing in same opening, complete all as specified and directed.

Taking down shutter of any description exceeding 1.00 Sqm and not exceeding 2.0 Sqm including re-securing or easing and adjusting and re-fixing in same opening, complete all as specified and directed.

Supply and fixing 2nd class hard wood, plain, solid, straight chowkat and frames, wrought framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified.

Supply and fixing 2nd class hard wood, 30mm thick, glazed, gauged and skeleton shutters, open rebated and prepared to receive glass, gauze etc. (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, gauze etc., size of members of shutters as specified in SSR Part I, Section 8, clause 8.24(a), complete all as specified and directed.

All as per Item No. 89 here in before, but divided into square with sash bars, any numbers, complete all as specified and directed.

Supply and fixing 2nd class hard wood, 35mm thick, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. with sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, gauze etc., size of members of shutters as specified in SSR Part I, Section 8, clause 8.24(a), complete all as specified and directed.

Supply and fixing 2nd class hard wood, 35mm thick, panelled shutter, plain, framed, panelled (any member of panels) with panels of timber flat on both sides (feather edged) or veneered particle board medium density, wood particle board with commercial face veneers, complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing, complete all as specified and directed.

S&F Factory made Solid Panel PVC door shutters, both sides using Prelamimated PVC sheet, 30 mm thick (Style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of both side Prelamimated colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing, complete all as specified and directed.

Supply and fixing 200 mm long aluminium anodised barrel tower bolt of extruded section, complete all as specified and directed.

Supply and fixing in repairs, 200 mm long aluminium anodised barrel tower bolt of extruded section, complete all as specified and directed.

Supply and fixing 150mm long aluminium anodised barrel tower bolt of extruded section, complete all as specified and directed.

Supply and fixing in repairs, 150mm long aluminium anodised barrel tower bolt of extruded section, complete all as specified and directed.

Supply and fixing 100mm long aluminium anodised barrel tower bolt of extruded section, complete all as specified and directed.

Supply and fixing in repairs, 100mm long aluminium anodised barrel tower bolt of extruded section, complete all as specified and directed.

Supply and fixing 300mm long aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy, complete all as specified and directed.

All as per Item No 101 here in before, but fixed in repairs, complete all as specified and directed.

Supply and fixing 100mm size Stainless Steel butt hinges, medium weight, complete all as specified and directed.

Supply and fixing 150 mm size extruded, anodised aluminium alloy handles, fabricated type, complete all as specified and directed.

All as per Item No. 104 here in before, but fixed in repairs, complete all as specified and directed.

All as per Item No. 104 here in before, but 100mm size, complete all as specified and directed.

All as per Item No. 106 here in before, but fixed in repairs, complete all as specified and directed.

Supply and fixing, aluminium plate Type II, gate and shutter hook and eye of 200mm size, complete all as specified and directed.

All as per Item No. 108 here in before, but fixed in repair, complete all as specified and directed.

Supply and fixing in repairs, 60 cm long tubular towel rail 20mm dia. brass chromium plated, with brackets, complete all as specified and directed. Make : Parryware Cat Part No. T6901A1 or Equivalent to Hindware/ Cera

Supply and fixing in repairs, stainless steel curtain rail bright finished, 25 mm dia. decorative type, complete all as specified and as directed by Engineer in Charge.

Supply and fixing in repairs, stainless steel bright finished decorative brackets/ finials for curtain rail 25mm dia., complete all as specified and directed.

Supply and fixing in repairs, aluminium alloy body door stopper and tongue anodised with hard drawn steel spring in floor, 140mm over length of cover plates, complete all as specified and directed.

Supply and fixing aluminium alloy wire cloth, 0.45 mm nominal dia. of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples, complete all as specified and directed.

All as per Item No. 114 here in before, but fixed in repair, complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames, glazed with putty or fitted with beads, complete all as specified and directed.

S&F Sheet glass ordinary quality, 3.00 mm thick and glazing with oil putty/ beads in squares not exceeding 0.5 Sqm in each pane, complete all as specified and directed.

Supply and fixing 4.00mm thick frosted glass, pin head type and glazing with oil putty/ beads in squares not exceeding 0.5 Sqm in each pane, complete all as specified and directed.

S&F in repairs, aluminium (extruded section) Door Closer, hydraulically regulated, Designation No.3 Universal Type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg and fixed with stainless steel screw, complete all as specified and directed.

Supply and fixing in repairs, vitreous China wash down water closet (pedestal pattern) white, (including fixing bolts) including removing old one and connection to drain and flush pipe, complete all as specified and directed.

Supply and fixing in repairs, vitreous China wash down water closet single piece (pedestal pattern) white, (including fixing bolts) including removing old one and connection to drain and flush pipe, complete all as specified and directed. Make: Parryware single piece suite Apollo C8939 (S-220) (690 x 375 x 730mm) or Equivalent make of Hindware/ Cera

Supply and fixing in repairs, plastic water closet seat, white, closed pattern with flat bottom and cover and mild steel chromium plated or alumininsed hinging device, complete all as specified and directed. Make : Cera/ Parryware/ Hindware

Supply and fixing in repairs, plastic water closet seat for single piece closet, white, closed pattern with flat bottom and cover and mild steel chromium plated or alumininsed hinging device, complete all as specified and directed. Make : Parryware EWC Seat cover E 8305 Ultra Solid white or Equivalent make of Cera/Hindware

Supply and fixing in repairs, PVC valveless syphonic action type, 10 Litres Capacity Flushing Cistern, low level, white, with inlet, ball valve, float and handle including MS brackets including flush pipe PVC connections etc. complete all as specified and directed.

S&F in repairs, Vitreous China Urinal, Half stall type, white, all as specified, excluding flushing pipe and waste pipe, complete all as specified and directed.

S&F in repairs, Vitreous China Urinal Partition, White of size 310mm x 700mm, all as specified and as directed by Engineer in Charge.

Supply and fixing in repairs, Vitreous China Wash Hand Basin of size 580mm x 450mm, White, flat back and including waste fittings, brass chromium plated 32 mm with long and fly nut screwed shank, excluding taps, waste chain and plug and porcelain stopper but including cast iron brackets, complete all as specified and directed.

S&F 15 mm bore Fancy type Cast Copper alloy chromium plated Pillar taps, with capstan heads, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed, complete all as specified and directed.

S&F in repairs, 15mm bore Fancy type brass chromium plated Pillar taps, with capstan heads, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and flynuts, screwed for 15mm bore iron pipe and fixed complete all as specified and directed. Make : Pillar Tap with aerator Parryware Cart Part No. Crust T3102A1 or Equivalent make of Hindware/ Cera

S&F in repairs SS Soap dish, complete all as specified and directed. Make : Parryware Cart part No.T6902A1 or Equivalent make of Cera/ Hindware

S&F in repairs, 100 mm dia. PTMT Grating doom (Minimum weight 25 grams), complete all as specified and directed.

S&F in repairs, PVC Bathroom Cabinet (White) of size 420mm x 300mm x 100mm (Approx.), with single shutter and built in mirror in front of shutter, complete all as specified and as directed by Engineer in Charge.

S&F in repairs, sheet glass shelf assembly consisting of 5.5mm thick sheet glass, 12 cm wide shelf with chromium plated guard and railing of size 60cm long (with brass bracket) complete all as specified and directed.

S&F in repairs, corner glass shelf of 5mm thick, plain sheet glass and with brass, chromium plated bracket complete all as specified and as directed by Engineer in Charge.

S&F in repairs, PVC backing looking mirror of size 45cm x 60cm fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and as directed by Engr-in-Charge.

Supply and fixing in repairs, 100 mm dia. PTMT gratings with provision to receive the waste water pipe and fixed with white cement alround, with minimum weight 25 gms., complete all as specified and directed.

Supply and fixing in repairs, PTMT Waste coupling of 32mm bore dia. (half or full threaded) (Minimum weight 45gms) complete all as specified and as directed.

M&L for 2 mm thick High Performance Modified Self-Adhesive Membrane SBS (Styrene Butadiene Styrene) based waterproofing membrane with high density polyester film on one side and easy to peel silicon film on the other side on roof including cleaning and preparation of surface, complete all as specified. Make : STP Ltd or Equivalent approved make.

Taking down cement plaster on Brick/ Concrete wall and ceilings, including racking out joints, hacking for key, scrubbing down with water complete all as specified and as directed by Engineer in Charge.

M&L for cement plaster in two coats, 8 mm thick in cement mortar 1:4 using WPC over 12mm thick in cement mortar 1:6 on external surfaces, finished even & smooth without using extra cement all as specified and directed. Note : WPC shall be measured and paid separately.

M & L for 5 mm thick rendering in cement mortar 1:3 on fair faces of ceiling surfaces, finished even and smooth complete all as specified and as directed by Engineer in Charge.

M&L for 10mm thick rendering on brick or concrete wall surfaces in cement mortar 1:6, finished even and smooth without using extra cement, complete all as specified and as directed by Engineer in Charge.

M&L preparation of new decorated surfaces of walls (plastered or unplastered) including cornices and applying two coats of cement base paint over a coat of priming, complete all as specified and as directed by Engineer in Charge.

M&L for preparation of new decorated surfaces of ceiling and applying three coats of white wash complete all as specified and as directed by Engineer in Charge.

M&L preparation of new plastered surfaces of wall (plastered or unplastered) including cornices and applying two coats of distemper oil emulsion over a coat of primer, complete all as specified and as directed by Engineer in Charge.

M&L for applying 3mm thick wall care putty on old and new plaster surface of wall, complete all as specified and as directed by Engineer in Charge.

S&F Aluminium powder coated sliding type window with 4mm thick plain sheet glass including provision of airtight heading and handling arrangements complete with using following sections : (i) Outer Frame 50.80x25.40x1.5mm (ii) 3 Track Frame 43.66x22x1.22mm (iii) Shutter Frame 31.80x14.50x1.20mm (iv) Shutter Interlock 31.80x20.50x1.20mm

S&F in repairs, aluminium powder coated frame work for partition (area of panel not exceeding 1.50 sqm each) with out sash bar, including all necessary jointing cleats, hold fasts, hinges with fixing clips, rubber gasket, anodised snap beading, anodised aluminium fittings, locking arrangement etc. (minimum thickness of powder coating 50 micron), Section used for partition as per Catalogue No. 9223 of size 63.58x38.10x2.00 mm (single partition vertical & horizontal sections) of Hindalco or equivalent make as approved by GE complete all as specified and as directed.

S&F in repairs, aluminium anodised powder coated frame work for door with out sash bar, including all necessary jointing cleats, hold fasts, hinges with fixing clips, rubber gasket, anodised snap beading, anodised aluminium fittings, locking arrangement etc. (minimum thickness of powder coating 50 micron), Section used for door as per Catalogue No. 9258 of size 50mmx44.50mmx1.80mm door vertical stiles, Catalogue No. 9286 of size 50mmx45mmx1.50mm door Top and middle/ lock rail, Catalogue No. 9246 of size 100mmx44.50mmx1.85mm door bottom rail, of Hindalco or equivalent make as approved by GE, complete all as specified and as directed.

S&F 9 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work, complete all as specified and as directed.

M&L for 5 mm thick sheet glass, ordinary quality fixed with glazing clips/aluminium cleats in square not exceeding 0.50 Sqm in each pane complete all as specified and as directed.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

S&F in repairs, aluminium anodised grill, having mesh size 50mm x 50mm made out of 6 mm wide 3 mm thick aluminium section including 'U' clips and all necessary fixing arrangements, complete all as specified and as directed .

Cutting chases, pinning in brick wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for damp proofing course etc., and making good, cutting not exceeding 20 cm girth, complete all as specified and directed.

Demolition of reinforced cement concrete in ground floor and pavings not exceeding 15cm thickness (below or above ground level) complete all as specified and as directed.

Material and labour for providing precast cement concrete 1: 2 : 4, Type B-1 using 20mm stone aggregate as in cover slab, shelves, cooking slab and similar articles and set in Cement Mortar 1:6 including necessary formwork, complete all as specified and as directed.

M&L TMT bars 10mm dia. and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns and including mild steel wire (annealed) not less than 0.90mm dia. or securing with clips, complete all as specified and directed.

All as per Item No. 157 here in above, but 6mm to 8mm dia TMT bars, complete all as specified and directed.

S&F in repairs, Steel Rolling Shutters, (lath thickness 1.25mm) without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, gear operated type with bevel gear box and crank handle complete all as specified and as directed.

Taking down existing wall panelling and similar works, complete all as specified and as directed.

S&F Solid PVC Wall Lining consisting of 5mm thick Plain wood grain printed colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing, complete all as specified and directed by Engineer in Charge.

S&F for Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixing with dash fasteners of required dia. and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ panelling, C.P. brass/ stainless steel screws, complete all as per architectural drawings & specifications and as directed by Engineer in Charge.

Material and labour for providing 5mm Self levelling EPU System consisting of 3mm thick NITOFLOR EU5 (FOSROC Ltd.) or 21N PURPM + 31M (SIKA Ltd.) or CIPOTHANESI (CIPY Ltd.) and 2mm thick top coat any NITOFLOR EPU 2000 (FOSROC Ltd.) or 21 N PURPM + 31 M (SIKA Ltd.) or CIPOTHANESI (CIPY Ltd.) using a 'V' notch trowel and rolled by spike roller over epoxy primer including removal of damaged portions of old EPU flooring, cleaning the old surface as per manufacturers instructions, all as specified and as directed by Engineer in Charge.

Demolition of brick work or stone, boulder, precast PCC block masonry including all quoins, arches, pillar etc. built in cement mortar or cement lime mortar complete all as specified and directed.

M&L for Precast cement concrete block masonry with solid blocks, Type C-1, 1:3:6 (using 20mm graded stone aggregate) exceeding 10 cm in width and setting in Cement Mortar 1:6, complete all as specified and as directed.

M&L for repairs to cracks in masonry walls up to fourth storey, (i) By marking 75 mm either side of the crack and cutting with hand held cutter including chip off the plaster and exposing brick work (ii) Make groove at every 150 mm c/c perpendicular to the crack and provide 8 mm dia. TMT bar (iii) Prepare AR mortar in the ratio of 1:3 and add Nitobound AR manufactured by M/s Fosroc or equivalent per bag of cement and grout the same with 20 mm nozzle to the primed concrete surface. (iv) Fill up and finish the crack using a trowel. Note : Reinforcement will be measured and paid in connected Item separately.

M&L for repairs to cracks between the interface of concrete and brick, up to fourth storey, (i) By marking 75 mm either side of the crack and cutting with hand held cutter including chip off the plaster and exposing brick work and concrete surface. (ii) Clean with water and allow to dry. (iii) Prepare AR mortar in the ratio of 1:3 and add Nitobound AR manufactured by M/s Fosroc or equivalent per bag of cement and apply the same up to half the thickness of plaster using trowel to the primed concrete surface. (iv) Fix chicken wire mesh or fibre mesh over the first layer of plastering. (v) Continue the 2nd layer of plastering with Nitobond SBR followed by smooth finish. (vi) Fill up and finish the crack using a trowel.

Dismantling of Stainless Steel hand rail including vertical post complete all as specified and as directed by Engineer in Charge.

S&F Stainless Steel Hand Rail (SS 316), rectangular/ round tube any size including end caps etc., complete all as specified and directed by Engineer in Charge.

Albert Rebello and Company

T K BUILDERS

PADMADEV CONSTRUCTIONS