04/24-25

Amount

Dismantling and clearing away (corporation limit) from site to the designated place as directed by the engineer at site including labour, lead and lift etc., complete.

AC Sheet Roofing without roof timbers

Brick / Stone Masonry in cement mortar walls under 3m

Fabricating Supplying and fixing in position of Aluminium anodised of powder coated finish 1/2 fixed glazing 1/2 prelaminated board of Aluminium partition of size 2.70m x2.10 m with required rubber beading etc, including necessary dismantling holes in RCC column, masonry wherever in necessary as directed by the departmental officers. All the aluminium sections should be anodised not less than 15 microns etc., complete.

Fabricating Supplying and fixing in position of Aluminium anodised (powder coated) single leaf door with half panelled with 12mm thick both side laminated particle board at bottom and half glazed using 5.50mm thick Plain glass at top.The outer frame shall be with aluminium box section and necessary accessories such as aluminium clips, rubber beading, PVC felt, handle for a length of shutter (both sides), locking arrangements, furniture fittings average anatic film thickness of 15 microns etc., complete. (With automatic door closure and hinges).

Supply and fixing of Medium Density Fibre (MDF) Board 12mm thick Exterior Grade with both sides Melamine finish in cupboards properly as directed by the field engineer at site including all labour, lead, lift, etc., complete.

Providing Cup-board Shutter using termite / water proof plywood of 19mm thick over which laminated sheet of 0.8mm thick fixed inside the shutter and 1mm thick fixed in the outside of the shutter using fevicol along with necessary furniture fittings, such as, hydralic hinges, tower bolt, handles, multi purpose locks etc., as directed by the Departmental Officers. The design pattern, water proof plywood, laminate sheet and other materials should be got approved from the Executive Engineer befoe use on work.

Fabrication, supply and fixing of structural steel using required angles, flats and square bars including cost of all necessary fittings,painting with two coats of enamel paint, cost of all materials, labour, lead, lift etc., complete.

Supplying and fixing Galvalume sheet roofing with 0.5mm thick of approved quality by drilling holes (and not by punching) with necessary ‘J’ / ‘U’ bolts and nuts etc., complete complying with standard specification and as directed by the departmetal officers

Wiring with 2 x 1.5 sq.mm (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150 x 100 x 113mm TW switch box for 5A 3 pin non inter locking Wall socket with 5A flush type switch with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC plug point (SD36)

Supply and fixing of 3 Nos. 5A (3pin and 2pin) combined flush type wall socket with control switches concealed in suitable TW box covered with hylem sheet in flush with wall with earth connection (for computer plug socket SD139)