REPAIR AND MAINT OF B and R WORKS, CLEANING OF SEPTIC TANKS, SEWER LINES, MANHOLES, FILTER BED INCLUDING CONNECTED OTHER MISC WORKS AT DIBER FD STN PITHORAGARH.

Amount

Contract Details

M&l for cleaning of Nahni/floor trap of bath /kitchen/urinal to1st manhole and then upto the final drop into the septic tanks and soak well /cess pool (including all intermediate manholes) by removing all blockage of any description in any situation in the system complete including removal of solid , waste material and buried it into ground by digging pits, at DIBER area exc 1.5 Km but not exc 2 Km .complete all as specified and directed

M&l for cleaning of bath /kitchen P/S trap, IWC/WC etc ,sewage system ie pipe line from gully trap to 1st manhole and then upto the final drop into the septic tanks and soak well /cess pool (including all intermediate manholes) by removing all blockage of any description in any situation in the system complete including removal of solid , waste material and buried it into ground by digging pits, at DIBER area exc 1.5 Km but not exc 2 Km .complete all as specified and directed

M&l for cleaning of sewage pipe line from gully trap to 1st manhole and then upto the final drop into the septic tanks and soak well /cess pool (including all intermediate manholes) by removing all blockage of any description in any situation in the system complete including removal of solid , waste material and burried it into ground by digging pits, at DIBER area exc 1.5 Km but not exc 2 Km complete all as specified and directed

M & L for taking up existing cover of manholes of any type any size and any depth dewatering and cleaning of manholes by removing sludge in semi solid state or liquid state by manually or by pressure pump including removal of sludge to a distance exc 1.5 Km but n.exc 2 Km out of DIBER area and burried into ground by digging pits and refixing the cover on manhole properly complete all as specified and directed.

M & L for taking up existing cover of soakage pit/ filter bed of any type/size/ capacity dewatering and removing old unserviceable brick bats by manually or by mechnically after emptying the sewage/ waste water including removal of sludge/ brick bats to a distance exc 1.5 Km but n.exc 5 Km out of MOD land and buried into ground by digging pits of suitable sizes covering these pits with excavated earth properly as directed, and placing the covers of sokage pit/septic tank in position after filling new bats complete all as specified and directed.

M&L for Demolition and breaking up drain pipes jointed in cement mortar of 200 dia pipes as specified

M& L for 200 mm bore salt glazed stoneware drain pipe grade A, laid in tranches and floor jointed as in replacement. complete all as pecified and directed.

M&L 100mm thick concrete bed to drain pipe in PCC (1:4:8) type D-2 using 40 mm graded stone aggregate incl packing under, and haunching against the sides of pipe after they are laid and tested for 200 mm bore complete all as specified and directed

Cutting out old SGSW 100 mm bore drain pipe in position, incl. jointing socket end with & including new SGSW pipe 600 mm long 100 mm bore grade ‘A’ with packed spun yarn and CM (1:1) incl removing and replacing existing materials and temporary plugging complete . Note:- Excavation as required & earthwork etc shall be measured and paid for separately

All as per item No 9 here-in-before , but 200mm bore

Excavation in trenches not exceeding 1.5 mtr deep and not exceeding 1.5 mtr wide in hard/dense soil for laying GI tubing completed all as specified.

Returning, filling in including spreading, leveling, watering and well ramming in layers of 25 cm thick after the cable etc are laid, jointed and tested completed all as specified complete all as specified and directed .

Removal of surplus excavated spoil not exceeding 50 mtr distance and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified.

Cutting into existing manholes built in cement mortar, for connecting new drains CI pipe of 100 mm bore and making good to pipe and rendering, cutting out existing benching for and forming branch channel in cement concrete (1:2:4) type -B1, smooth finished , and reforming benching complete all as specified and directed

Cutting into existing manholes built in cement mortar, for connecting new drains SGSW pipe of 150 mm bore and making good to pipe and rendering, cutting out existing benching for and forming branch channel in cement concrete (1:2:4) type -B1, smooth finished , and reforming benching complete all as specified and directed

S & F in repair 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed on walls/floors wth PVC holding clamps etc complete all as specified & directed.

S & F in repair 75 mm bore PVC (SWR) bends complete all as specified & directed.

S & F in repair 75 mm bore PVC (SWR) vent cowl complete all as specified & directed.

S & F in repair PVC (SWR) junction (single T) equal or unequal 75 mm bore complete all as specified & directed.

S & F in repairs 110mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints fixed to walls/floors with necessary fittings complete all as specified & directed.

S & F PVC (SWR) bends 110 mm bore complete all as specified & directed.

S & F PVC (SWR) vent cowl 110 mm bore complete all as specified & directed.

S & F PVC (SWR) junction (single T) equal or unequal 110 mm bore complete all as specified & directed.

M&L Hacking out old broken glass (any thickness), size quality or description from wooden frames/ steel window complete all as specified & directed

S & F 3mm thick sheet glass, ordinary quality, glazing with oil putty or fixed with wooden beads in steel/wooden windows in squares n.exc 0.50sqm each pane at any floor/hight complete all as specified & directed.

S&F in repair PVC waste pipe flexible for WHB of 32 mm complete all as specified

S&F in repair PVC waste pipe flexible for sink of 32 mm complete all as specified

S&F in repair for jet spray SS suitable for water closet pedastral pattern with PVC comnnection complete all as specified

S&F in repair for Bathroom Faucets Brass hand Jet Spray shower with pipe 1.5mtr SS flexible shower tube pipe complete all as specified

S&F in repair PVC cover for water storage tank of capacity exc 250 Ltr but n.exc 500 ltrs complete all as specified

S&F in repair door bottom brush strip PVC seal 2.5'' to 3.5'' complete with screw not bolts complete all as specified and directed.

S & F (in repair) CP brass soap dish complete all as specified & directed.

S&F in repair PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified

Ditto but length 900mm

Taking up or down steel tubing 15mm bore and connection including cleaning for refixing complete all as specified and directed.

Refixing old serviceable 15 mm GI tubing and connection in new or old position (Wall, ceiling floor etc.) including necessary fittings & fixtures ie. Union, nipple, socket etc. complete all as specified and directed

Supply and Fix 15 mm bore medium grade galvanised steel tubing with all fittings and fixed complete to walls and ceiling or laid in floor complete incl ie. Union, nipple, socket etc. all as specified and directed.

Taking up or down steel tubing 20mm bore and connection including cleaning for refixing complete all as specified and directed.

Refixing old serviceable 20 mm GI tubing and connection in new or old position (Wall, ceiling floor etc.) including necessary fittings & fixtures ie. Union, nipple, socket etc. complete all as specified and directed

Supply and Fix 20mm bore medium grade galvanised steel tubing with all fittings and fixed complete to walls and ceiling or laid in floor complete incl ie. Union, nipple, socket etc. all as specified and directed. Note for items No (35 to 40) The quoted rates shall be deemed to be inclusive for cutting chases in brick walls/pillars etc. for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing surface.

S&F in repair for 1000 litre capacity rotational moulded polythylene water storage tanks (cylindrical vertical with closed top ) hoisted and fixed in position including dismantling of existing water tanks of syntax complete all as specified and directed.

S&F in repair for 500 litre capacity rotational moulded polythylene water storage tanks (cylindrical vertical with closed top ) hoisted and fixed in position including dismantling of existing water tanks of syntax complete all as specified and directed.

Supply & fix nipple suitable for HDPE water tank 15mm-38 gms.

Supply & fix nipple suitable for HDPE water tank 20mm-45 gms.

S & F in repair Waste Coupling of PTMT (half or full threaded) minimum weight 32 mm /45 gms

S&F in repair Bottle trap of PTMT having minimum water seal of 25mm (Minimum weight 32mm-260gms/ 40mm-270 gms) 32 mm bore dia discharge pipe fixed for wash hand basin with inlet and outlet screwed for pipe and connections incl necessary packing , union and cap complete all as specified and directed.

S & F in repairs vitreous china squatting pan of ‘Orrisa pattern’ size 580x440mm, white with integral foot rest including replacement of ‘P’ or ‘S’ trap, lime concrete bedding and making good floor complete all as specified and directed.

S & F in repair vitreous china wash down water closet pan (pedestal pattern), white, including plastic seat cover and flushing pipe complete all as specified & directed.

S & F in repairs PVC low level flushing cistern 10 Litre capacity, symphonic action type, white as approved including ball valve, float valve and handle, flush pipe complete all as specified & directed.

S & F in repairs) vitreous china wash hand basin, white, size 550 x 400 mm including brackets, chromium placted waste coupling &PVC waste pipe of 32 mm dia complete all as specified & directed.

S & F in repairs vitreous china bowl urinal flat back size 465x355x265mm, white with grating and union for discharge pipe including PVC waste pipe , urinal spreader complete all as specified & directed.

S & F in repair) 15 mm bore fancy type long body bib taps brass chromium plated screwed down, screwed for iron pipe or for brass ferrule including flench complete all as specified & directed.

S & F in repair 15mm bore pillar taps, brass chromium plated, fancy type screwed down high pressure with or without lettered, hot or cold with long screwed shanks and fly nuts, screwed to iron pipe complete all as specified & directed.

S & F in repair 15 mm dia chromium plated angle cocks/stop valves, brass, screwed down, high pressure with crutch or butterfly handle, flench screwed both ends for iron pipe or for union complete all as specified & directed.

S & F in repairs 15 mm bore concealed stop cock, chromium plated, cast copper alloy, screwed down with crutch or butterfly handle screwed both ends complete all as specified & directed.

S & F in repair shelf /corner shelf of PTMT fixed with and including chromium plated brass screws and wooden / plastic cleats (Minimum weight 300 grms)

S & F in repairs stainless steel sink with draining board, made out of 1mm thick steel sheet for kitchen with waste pipe, CI cantilever brackets, connecting union overall size 915 x 460mm with bowl size 410 x 330 x 160mm complete all as specified & directed.

S & F in repair waste fitting 32mm dia brass chromium plated for glazed ware sinks basins etc with long screwed shanks and fly nuts flange and bedded in red lead cement and other end fixed all as spd & directed

S & F in repair centre hole basin mixture 15mm dia chromium plated high pressure all as specified & directed.

S & F in repair plastic water closet seat cover closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device

S & F in repair brass chromium plated shower rose 125mm size complete all as specified & directed.

S & F in repairs PVC bib taps, 15 mm bore, standard of PTMT any colour high pressure, screwed for iron pipe and fixed including flench.. (Minimum weight 15 mm bore - 90 gms) Make- Prayag or equivalent as approved by AGE complete all as specified & directed.

S&F in repair for 15 mm bore dia of pipe ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (min weight 20mm - 210 gms) comnnection complete all as specified

S&F in repair for 20 mm bore dia of pipe ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (min weight 20mm - 210 gms) comnnection complete all as specified

M & L for taking down and refixing the aluminium shutter after easing, repairing etc.Note:- New items shall be paid separately under respective item. Of sch 'A' as supply only.

Supply only double action hydraulic floor door closer regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box ,main body with stainless steel cover,heavy duty complete all as specified & directed.

Supply only locking arrangements complete all as specified & directed.

Supply only aluminium(die cast) hydraulic door closer in aluminium door.

S & F in repair mild steel 300 mm size ordinary rat tail rod pattern spring including roller and roller plate (Helical door spring) for door shutter complete all as specified & directed.

S&F in repair aluminium anodised barrel tower bolt 75 mm of extruded section and fixed

S&F in repair aluminium anodised barrel tower bolt 125 mm of extruded section and fixed

S&F in repair aluminium anodised barrel tower bolt 150 mm of extruded section and fixed

S&F in repair aluminium anodised barrel tower bolt 200 mm of extruded section and fixed

S&F in repair aluminium anodised barrel tower bolt 300 mm of extruded section and fixed

S&F in repair MS butt hinges 75mm heavy duty cold rolled mild steel and fixed

S&F in repair MS butt hinges 100 mm heavy duty cold rolled mild steel and fixed

S&F in repair MS butt hinges 125mm heavy duty cold rolled mild steel and fixed

S&F in repair MS sliding door bolt 200mm plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed

S&F in repair MS sliding door bolt 300mm plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed

S&F in repair aluminium alloy anodised sliding door bolt 200mm plate type, and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed

S&F in repair aluminium alloy anodised sliding door bolt 300mm plate type, with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed

S&F in repair aluminium handle 125 mm cast type anidised

S&F in repair aluminium handle 150 mm cast type anidised

S&f Garting round 140 mm size of PTMT minimum weight 50 gms

S&F in repair Floor door stopper 140 mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor

S & F kitchen plate rack in repair of stainless steel of size 720mm x 600mm x 230 mm made out of 1 mm thick steel sheet complete all as specified & directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the premises complete all as specified & directed.

M & L for non skid joint free ceramic white tiles of size 7-8 mm thick (Square/rectangular) area of each tile exc. 0.11 Sqm but n.exc. 0.18 Sqm as in floors surface, set and jointed in neat cement slurry and pointed with white or colour cement to match over and including 15mm screed bed or bedding layer in cement mortar 1:6 complete all as specified & directed.

M & L for non skid joint free ceramic white tiles of size 7-8 mm thick (Square/rectangular) area of each tile exc. 0.11 Sqm but n.exc. 0.18 Sqm as in vertical surfaces, such as skirting,dados and riser to steps etc set and jointed in neat cement slurry and pointed with white or colour cement to match over and including 10mm thick plaster in CM 1:4 complete all as specified & directed.

Taking out the existing loose fitted door shurter, hang and defective due to locking arrangement and M&L for repair / replacement of locking arrangement, bracing,welding,screwing nut & bolts,painting,re-fix the existing serviceable parts in position, removing & replacement of defective/ unserviceable parts, if any, with new parts, reassembling the doors, making necessary adjustment and proper alignment of items in position, and testing at site to the entire satisfaction complete all as specified and directed.

Taking out the existing loose fitted iron heavy weighted framing area Gate No-1& 2, hang and defective due to locking arrangement and M&L for repair / replacement of locking arrangement, braciing,welding,screwing nut & bolts,painting, reassembling the same shurter, making necessary adjustment and proper alignment of items in position, and testing at site to the entire satisfaction complete all as specified and directed.

Note :-(i) The entire work will run for 11 months as indicated in the tender documents. Completion before time shall not be entertained by the accepting officer. Site for the entire work shall be given to the Contractor in piecemeal manner and as per user requirement. The Contractor or his rep will report to the Engineer-in –Charge/JE Concerned on day to day basis to received the urgent nature of works and execute the same day to day basis. Non attending/reporting/execution of such nature of works in piecemeal manner a penalty of Rs. 100 per day shall be levied to the contractor. The rates quoted by the Contractor shall be included in the respective item of BOQ. No extra payment shall be admissible to the contractor on this account. (ii) Tenderers may be noted that amount of credit will be deducted from the total amount arrived, at the time of Acceptance of contract”.

Bajetha Construction

om enterprises

SURYA CONSTRUCTION