Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹10.8 CrAccepted-AOC | ₹10.8 Cr | L1 | Accepted-AOC L1 |
| 2 | L2₹11.8 CrRejected-AOC B 163 SWARN JAYANTI PURAM GHAZIABAD GHAZIABAD GHAZIABAD GHAZIABAD UTTAR PRADESH 201001 | GHAZIABAD | UTTAR PRADESH | 201001 | ₹11.8 Cr | L2 | Rejected-AOC L2 |
| 3 | L3₹12.0 CrRejected-AOC 112 RADHEY SHYAM VIHAR PHASE II MURAD NAGAR GHAZIABAD UP | GHAZIABAD | UP | ₹12.0 Cr | L3 | Rejected-AOC L3 |
| 4 | L4₹13.0 CrRejected-AOC | ₹13.0 Cr | L4 | Rejected-AOC L4 |
| 5 | Not Admitted-Fee/PreQual/Technical | - | - | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification |
Tender Value
₹12.8 Cr
EMD Value
₹25.6 L
Closing Date
26 Feb 2020, 5:00 pmClosed
Superintending Engineer,Contract and Procurement-I
VCV Gabar Singh Urja Bhawan
Construction of 2x10MVA 33/11KV Substation (Indoor Type) at Jagjeetpur, Haridwar and its associated 33KV underground line with Power Distribution Center (PDC) under Kumbh Mela-2021 on turnkey basis.
2020_UPCLC_22585_2
CCP-I/41/2019-2020
Open Tender
Electrical Works
240 days
As per tender specification
As per tender specification
6 documents required · 6 mandatory
₹29,500
Executive Engineer, ESD, UPCL
₹25.6 L
20 May 2020
15 Feb 2020
27 Feb 2020
15 Feb 2020
26 Feb 2020
21 Feb 2020
Amount
33kV substation class II Surge Arrestor with insulators
33kV 3CX400 SQMM XLPE Cable and its laying in Trenches
33kV Outdoor cable termination kit (3CX400 SQMM)
33kV Indoor cable termination kit (3CX400 SQMM)
10 MVA, 33/11 KV Power Transformer with On Load Tap Changer with complete RTCC & related accessories
25 kVA, 33/0.4 KV Oil Cooled Type for Substation supply.
9kV, 10kA Outdoor type Lighting Arrestors
Prefabricated Containerised Enclosure ( PDC ) consisting of 33kV and 11kV Indoor Switchgear Panel, Battery Charger, Battery, Lighting DB, ACDB, DCDB, Air Conditions, Survillance system along with other accessiories as per detailed specifications. 8.1. 33kV Vacuum Circuit Breaker Panel Board Indoor type (With termination kits) CT, PT, Microprocessor based Protection Relay, Metering equipments, Extinsible both sitdes, Bus Bars etc, consist of: (Scada operated) i. Incomer Panel with CT Ratio 600-300/5-5A - 2No. ii. Outgoing Panel with CT Ratio 600-300/5-5A - 2Nos. 8.2. 11kV Vacuum Circuit Breaker Panel Board Indoor type (with termination kits) with required CT, PT, Microprocessor based Protection Relay, Metering equipments, Extinsible both sitdes, Bus Bars etc, consist of: (Scada operated) i. Incomer Panel with CT Ratio 800-400/5-5A - 2Nos. ii. Outgoing Panel with CT Ratio 400-200/5-5A - 6Nos. iii. Bus Coupler Panel with riser - 1Nos. 8.3. Battery & Charger i. 24V Battery Set (2*12V)- Tubular type - 1No. ii. 24V Battery Charger with Automatice boost and trickle charge - 1Set 8.4. 24V DCDB - 1Set 8.5. AC Power distribution Board - 1Set
11kV 3CX400 SQMM XLPE Cable and its laying in Trenches
11kV 3CX300 SQMM XLPE Cable and its laying in Trenches
33 kV 3CX70 SQMM XLPE Cable and its laying
11kV Outdoor Cable termination kit (3CX400 SQMM)
33 kV Outdoor Cable termination kit (3CX70SQMM)
11kV Indoor Cable termination kit (3CX400 SQMM)
11kV Indoor Cable termination kit (3CX300 SQMM)
33kV Indoor Cable termination kit (3CX70SQMM)
LT Power & Control Cable from Station T/F to AC DB along with suitable crimping lugs and its laying:
(i) 3.5CX120SqMM LT Power Cable Aluminium
(ii) LT PVC Cable Aluminium 4X10 Sq MM
(iii) LT PVC Cable Aluminium 2X6 Sq MM
(iv) 10CX2.5 SqMM LT Control Cable Copper
(v) 4CX2.5 SqMM LT Control Cable Copper
(vi) 2CX2.5 SqMM LT Control Cable Copper
(vii) Suitable rating lugs, glands, braided copper wire/Strip (50X500MM) with coppper lugs
Earth of Substation and equipments
(i) 32MM MS Round
(ii) 65X6MM GI Strip
(iii) 40/50X6 GI Strip
(iv) Special chemical earthing
Cost of fire & safety equipments of Substation
(i) CO2 type ire Extingusher confirming IS 2878-1976 and cylinder fully charged of 4.5kg capacity
(ii) Foam type Fire Extingusher portable type 5 Lit capacity hang on wall with bracket complete as required.
(iii) Metal fire bucket with sand
(iv) Stand of chuggi type of MS Angle 50X50X6 MM with top covered by MS sheet 1.5MM thickness duly painted with Red color including fabrication complete
Mics items for Substation like:
Insulating mat Class C 3 mm Synthetic Insulating Mat- Confirming to IS 15652 : 2006. Along the all equipments in Power Distribution Centre (PDC)
Steel office table, Godrej, (4'x2.5')
Steel Almirah, Godrej,
Steel office chair, Godrej,
Shock treatment chart
Danger board
Shut down / Break down board (Bi-lingual Hindi & English)
HT Hand Gloves
Wall Clock
First aid Box
5 KV Megger Digital
2.5kv Megger Digital
Earth Megger Digital
Single line diagram of size 3’x2½’ on flex board, duly printed.
Sub-station name board (Size 3'x2' of MS sheet & MS angle 45x45x5 mm, Height 1.5 mtr. Above ground level ), duly painted
Name plate of equipment LA etc. (Size 9"x5" with white base, red border & letter written in red color)
Sundries items Cable tie, Alu lug, Copper lug & HT, LT tape, pvc compound, ferrule, pvc flexible pipe, paint writing on panels, cable glands for control cable.
Perforated Cable Tray
(iii) 100MM
LIGHTING ARRANGEMENT AT YARD AND S.G. ROOM
i. S.T. Pole 8 mtr. Long S.P.-10 (Bottom Portion hot dip Galvanized)
ii. Iron clad 30 Amps water proof switch on the ST pole.
iii. 250W, HPSV/ LED lamp with control gear & mounting accessories
150W, HPSV/ LED lamp with control gear & mounting accessories & 15 A MCB's
11kV Outdoor SF6 insulated 2-way Ring Main Unit consist of 1No. Direct Cable Module and 1No. Motor operated VCB module as outgoing to 11kV Feeders.
11kV Indoor Cable termination kit (3CX300 SQMM)
MS strcuture steel, angle, channel, Rail, MS Bar, RS Joist, MS Plate. Duly painted 1 coat Red Oxide, 2 coat aluminium paint - Aisan, Burger, Dulux.
Wire Mesh fencing with gate, RS Joist, duly painted on both sides with green color and red oxide as per specifications including civil works, stay post,
Description of Work / Item(s)
Amount
33kV substation class II Surge Arrestor with insulators
33kV 3CX400 SQMM XLPE Cable and its laying in Trenches
33kV Outdoor cable termination kit (3CX400 SQMM)
33kV Indoor cable termination kit (3CX400 SQMM)
10 MVA, 33/11 KV Power Transformer with On Load Tap Changer with complete RTCC & related accessories
25 kVA, 33/0.4 KV Oil Cooled Type for Substation supply.
9kV, 10kA Outdoor type Lighting Arrestors
Prefabricated Containerised Enclosure ( PDC ) consisting of 33kV and 11kV Indoor Switchgear Panel, Battery Charger, Battery, Lighting DB, ACDB, DCDB, Air Conditions, Survillance system along with other accessiories as per detailed specifications. 8.1. 33kV Vacuum Circuit Breaker Panel Board Indoor type (With termination kits) CT, PT, Microprocessor based Protection Relay, Metering equipments, Extinsible both sitdes, Bus Bars etc, consist of: (Scada operated) i. Incomer Panel with CT Ratio 600-300/5-5A - 2No. ii. Outgoing Panel with CT Ratio 600-300/5-5A - 2Nos. 8.2. 11kV Vacuum Circuit Breaker Panel Board Indoor type (with termination kits) with required CT, PT, Microprocessor based Protection Relay, Metering equipments, Extinsible both sitdes, Bus Bars etc, consist of: (Scada operated) i. Incomer Panel with CT Ratio 800-400/5-5A - 2Nos. ii. Outgoing Panel with CT Ratio 400-200/5-5A - 6Nos. iii. Bus Coupler Panel with riser - 1Nos. 8.3. Battery & Charger i. 24V Battery Set (2*12V)- Tubular type - 1No. ii. 24V Battery Charger with Automatice boost and trickle charge - 1Set 8.4. 24V DCDB - 1Set 8.5. AC Power distribution Board - 1Set
11kV 3CX400 SQMM XLPE Cable and its laying in Trenches
11kV 3CX300 SQMM XLPE Cable and its laying in Trenches
33 kV 3CX70 SQMM XLPE Cable and its laying
11kV Outdoor Cable termination kit (3CX400 SQMM)
33 kV Outdoor Cable termination kit (3CX70SQMM)
11kV Indoor Cable termination kit (3CX400 SQMM)
11kV Indoor Cable termination kit (3CX300 SQMM)
33kV Indoor Cable termination kit (3CX70SQMM)
LT Power & Control Cable from Station T/F to AC DB along with suitable crimping lugs and its laying:
(i) 3.5CX120SqMM LT Power Cable Aluminium
(ii) LT PVC Cable Aluminium 4X10 Sq MM
(iii) LT PVC Cable Aluminium 2X6 Sq MM
(iv) 10CX2.5 SqMM LT Control Cable Copper
(v) 4CX2.5 SqMM LT Control Cable Copper
(vi) 2CX2.5 SqMM LT Control Cable Copper
(vii) Suitable rating lugs, glands, braided copper wire/Strip (50X500MM) with coppper lugs
Earth of Substation and equipments
(i) 32MM MS Round
(ii) 65X6MM GI Strip
(iii) 40/50X6 GI Strip
(iv) Special chemical earthing
(v) Gravel pitching 1/2" to 3/4"
Cost of fire & safety equipments of Substation
(i) CO2 type ire Extingusher confirming IS 2878-1976 and cylinder fully charged of 4.5kg capacity
(ii) Foam type Fire Extingusher portable type 5 Lit capacity hang on wall with bracket complete as required.
(iii) Metal fire bucket with sand
(iv) Stand of chuggi type of MS Angle 50X50X6 MM with top covered by MS sheet 1.5MM thickness duly painted with Red color including fabrication complete
Mics items for Substation like:
Insulating mat Class C 3 mm Synthetic Insulating Mat- Confirming to IS 15652 : 2006. Along the all equipments in Power Distribution Centre (PDC)
Steel office table, Godrej, (4'x2.5')
Steel Almirah, Godrej,
Steel office chair, Godrej,
Shock treatment chart
Danger board
Shut down / Break down board (Bi-lingual Hindi & English)
HT Hand Gloves
Wall Clock
First aid Box
5 KV Megger Digital
2.5kv Megger Digital
Earth Megger Digital
Single line diagram of size 3’x2½’ on flex board, duly printed.
Sub-station name board (Size 3'x2' of MS sheet & MS angle 45x45x5 mm, Height 1.5 mtr. Above ground level ), duly painted
Name plate of equipment LA etc. (Size 9"x5" with white base, red border & letter written in red color)
Sundries items Cable tie, Alu lug, Copper lug & HT, LT tape, pvc compound, ferrule, pvc flexible pipe, paint writing on panels, cable glands for control cable.
Perforated Cable Tray
(iii) 100MM
LIGHTING ARRANGEMENT AT YARD AND S.G. ROOM
i. S.T. Pole 8 mtr. Long S.P.-10 (Bottom Portion hot dip Galvanized)
ii. Iron clad 30 Amps water proof switch on the ST pole.
iii. 250W, HPSV/ LED lamp with control gear & mounting accessories
150W, HPSV/ LED lamp with control gear & mounting accessories & 15 A MCB's
11kV Outdoor SF6 insulated 2-way Ring Main Unit consist of 1No. Direct Cable Module and 1No. Motor operated VCB module as outgoing to 11kV Feeders.
11kV Indoor Cable termination kit (3CX300 SQMM)
MS strcuture steel, angle, channel, Rail, MS Bar, RS Joist, MS Plate. Duly painted 1 coat Red Oxide, 2 coat aluminium paint - Aisan, Burger, Dulux.
Wire Mesh fencing with gate, RS Joist, duly painted on both sides with green color and red oxide as per specifications including civil works, stay post,
Civil Works for Power Distribution Centre Plinth, Power and Station Transformer plinth, Cable trench, Lighting Poles
ii. Brick work in 1:4
iii. CC 1:1.5:3
iv. Plaster in 1:4
v. Excavation of earth in mixed soil
Land Development Works (Construction of Approach Road)
Description of Work / Item(s)
Amount
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
Providing and laying in position cement concrete in ratio 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
Providing and laying in position specified grade of reinforced cement concrete in ratio 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level
Reinforced cement concrete work in 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up to floor five level excluding cost of centering, shuttering, finishing and reinforcement.
Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete.
Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers.
Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts.
Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.Thermo-Mechanically Treated bars.
Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:4 (1 cement : 4 coarse sand)
Brick work with F.P.S. bricks of class designation 75 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand)
Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level up to floor V level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand)
Steel work welded in built up sections/ framed work including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
Dry brick on edge flooring in required pattern with bricks of class designatio 7.5 on a bed of 12 mm mud mortar, including filling joints with Jamuna sand, with common burnt clay non modular bricks.
12 mm cement plaster of mix 1:6 (1 cement: 6 coarse sand)
15mm cement plaster on rough side of single or half brick wall of mix: 1:6 (1cement :6 coarse sand)
.Finishing walls with water proofing cement paint of required shade : New work (Two or more coats applied @ 3.84 kg/10 sqm)
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work.
Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) in pavements, laid to required slope and camber in panels as required including consolidation finishing and tamping complete.
Earth filling under floor and in sub-station area including cost of earth. Earth to be obtained from outside the corporation area including its cartage and ramming, watering, dressing in 20 cm's thick layers including cost of earth with all lead and lift etc.
Providing and fixing 1st quality Somany Digital wall tiles 300X450 mm size conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
Description of Work / Item(s)
Amount
33KV CABLE LAYING :
Supply and Laying of HT cable as per the code of practice for installation and maintenance of power cables as per IS 1255 :1983 or latest amendments using conventional excavation method and Laying the cable in Half Cut 200mm Cement Hume Pipe (includimg its supply) at the depth of about 1meter as per site requirement & Cable dia including provision of cable route markers in CC casting etc. (Complete in all respect)
33KV (E) XLPE HT cable 3x400sqmm
Supply and Laying of HT cable as per the code of practice for installation and maintenance of power cables as per IS 1255 :1983 or latest amendments using cable trench pullers without open excavation in HDPE Pipe (includimg its supply) through HDD machine including provision of cable route markers in CC casting etc: (Complete in all respect)
33KV (E) XLPE HT cable 3x400sqmm
Supply, erection, testing and commissioning of HT cable termination Kits / Straight through
i. 33 KV (E) XLPE HT cable 3 x 400 sq.mm (Outdoor)
ii. 33kV Touch proof termination kits 3X400Sq MM (suitable for 33kV RMU) (Indoor)
iii. 33KV (E) XLPE HT cable 3x400sqmm (Straight through)
Supply and laying of B-Class Heavy duty GI pipe as IS 1239 at Road crossing, culverts, crossings, by side of bridges with support hangers, fastners, complete in all respects.
33KV RING MAIN UNITS
Supply. Erection, Testing and commissioning of 33kV 630A 25kA/1 sec Outdoor Motorised SF6 insulated Ring Main Unit with 1No. Load Break Switch as incomer and 2nos. VCB Module as outgoings (CVV) including, auxiliary power transformer and suitable provisions with to connect with FRTU in future. (Scada Operated)
Description of Work / Item(s)
Amount
33KV CABLE LAYING :
Supply and Laying of HT cable as per the code of practice for installation and maintenance of power cables as per IS 1255 :1983 or latest amendments using conventional excavation method and Laying the cable in Half Cut 200mm Cement Hume Pipe (includimg its supply) at the depth of about 1meter as per site requirement & Cable dia including provision of cable route markers in CC casting etc. (Complete in all respect)
33KV (E) XLPE HT cable 3x400sqmm
Supply and Laying of HT cable as per the code of practice for installation and maintenance of power cables as per IS 1255 :1983 or latest amendments using cable trench pullers without open excavation in HDPE Pipe (includimg its supply) through HDD machine including provision of cable route markers in CC casting etc: (Complete in all respect)
33KV (E) XLPE HT cable 3x400sqmm
Supply, erection, testing and commissioning of HT cable termination Kits / Straight through
i. 33 KV (E) XLPE HT cable 3 x 400 sq.mm (Outdoor)
ii. 33kV Touch proof termination kits 3X400Sq MM (suitable for 33kV RMU) (Indoor)
iii. 33KV (E) XLPE HT cable 3x400sqmm (Straight through)
Supply and laying of B-Class Heavy duty GI pipe as IS 1239 at Road crossing, culverts, crossings, by side of bridges with support hangers, fastners, complete in all respects.
33KV RING MAIN UNITS
Supply. Erection, Testing and commissioning of 33kV 630A 25kA/1 sec Outdoor Motorised SF6 insulated Ring Main Unit with 1No. Load Break Switch as incomer and 2nos. VCB Module as outgoings (CVV) including, auxiliary power transformer and suitable provisions with to connect with FRTU in future. (Scada Operated)
CIVIL WORKS
Making and casting of equipment foundations as per the site requirement and design report in Brick work including all material
Making and casting of Manholes , wherever required for obervation/ monitoring the cable as per site requirement including RCC heavy duty chamber cover( including all material)
Capital Electech Pvt Ltd
RP INFRAPOWER PVT LTD
DEVYANSH CONSTRUCTION AND DEVELOPERS PRIVATE LIMITED
DEVYANSH CONSTRUCTION AND DEVELOPERS PRIVATE LIMITED
RP INFRAPOWER PVT LTD
Capital Electech Pvt Ltd
DEVYANSH CONSTRUCTION AND DEVELOPERS PRIVATE LIMITED
s iSat Network Engineers Pvt Ltd
RP INFRAPOWER PVT LTD
Capital Electech Pvt Ltd
RP INFRAPOWER PVT LTD
s iSat Network Engineers Pvt Ltd
Capital Electech Pvt Ltd
DEVYANSH CONSTRUCTION AND DEVELOPERS PRIVATE LIMITED
RP INFRAPOWER PVT LTD
s iSat Network Engineers Pvt Ltd
RP INFRAPOWER PVT LTD
DEVYANSH CONSTRUCTION AND DEVELOPERS PRIVATE LIMITED
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid