e-tender for the Furnishing Works in Community Skill Park 9Locations at TVM

Amount

e-tender for the Furnishing Works in Community Skill Park at Thiruvananthapuram PAC for 1 Location - Rs 1209500/- PAC for 9 Location - Rs 1209500/- * 9 = Rs 10885500 For more details refer tender documents

Work Chairs (Semi Executive Low Back Revolving Chair) The seat cushion of the chair should be made up of 50mm thick High Density of 45±2 Kg/m3 polyurethane mould and back cushion should be made up of 38mm thick High Density 33±2 Kg/m3. The polyurethane foam shall be as per manufacturer’s specification. The hardness of foam shall be 20 kg on hampden machine and 25% compression and it should be covered with fabric as per manufacturer’s shade card. The arms of the chairs should be black . The Gas lift mechanism should be tested as per Standards. The pedestal should be five legged injection moulded in black nylon and fitted with 5 nos twin wheel castors. The castors of the chairs should be glass filled, twin wheel castors and tested to perform 1,00,000 cycles with 225 lbs Load. Note -The back and base of chair should be supplied with fabric upholstered . Overall Height of chair should be minimum 970 mm (Inclusive of maximum adjustment of gas lift mechanism)

Instructor Chair (Semi Executive Medium Back Revolving Chair) The seat cushion of the chair should be made up of 50mm thick High Density of 45±2 Kg/m3 polyurethane mould and back cushion should be made up of 38mm thick High Density 33±2 Kg/m3. The polyurethane foam shall be as per manufacturer’s specification. The hardness of foam shall be 20 kg on hampden machine and 25% compression and it should be covered with fabric as per manufacturer’s shade card. The arms of the chairs should be black . The Gas lift mechanism should be tested as per Standards. The pedestal should be five legged injection moulded in black nylon and fitted with 5 nos twin wheel castors. The castors of the chairs should be glass filled, twin wheel castors and tested to perform 1,00,000 cycles with 225 lbs Load. Note -The back and base of chair should be supplied with fabric upholstered . Overall Height of chair should be minimum 1100 mm (Inclusive of maximum adjustment of gas lift mechanism)

Main Chair (Executive High Back Revolving Chair) The seat cushion of the chair should be made up of 50mm thick High Density of 45±2 Kg/m3 polyurethane mould and back cushion should be made up of 38mm thick High Density 33±2 Kg/m3. The polyurethane foam shall be as per manufacturer’s specification. The hardness of foam shall be 20 kg on hampden machine and 25% compression and it should be covered with fabric as per manufacturer’s shade card. The arms of the chairs should be black . The Gas lift mechanism should be tested as per Standards. The pedestal should be five legged injection moulded in black nylon and fitted with 5 nos twin wheel castors. The castors of the chairs should be glass filled, twin wheel castors and tested to perform 1,00,000 cycles with 225 lbs Load. Note -The back and base of chair should be supplied with fabric upholstered . Overall Height of chair should be minimum 1100 mm (Inclusive of maximum adjustment of gas lift mechanism)

Sub. Chairs (Semi Executive Medium Back Revolving Chair) The seat cushion of the chair should be made up of 50mm thick High Density of 45±2 Kg/m3 polyurethane mould and back cushion should be made up of 38mm thick High Density 33±2 Kg/m3. The polyurethane foam shall be as per manufacturer’s specification. The hardness of foam shall be 20 kg on hampden machine and 25% compression and it should be covered with fabric as per manufacturer’s shade card. The arms of the chairs should be black . The Gas lift mechanism should be tested as per Standards. The pedestal should be five legged injection moulded in black nylon and fitted with 5 nos twin wheel castors. The castors of the chairs should be glass filled, twin wheel castors and tested to perform 1,00,000 cycles with 225 lbs Load. Note -The back and base of chair should be supplied with fabric upholstered . Overall Height of chair should be minimum 1100 mm (Inclusive of maximum adjustment of gas lift mechanism)

Visitors Chairs (Executive Fixed Base Low Back Chair) Providing and Supplying of Fixed Base Cushion chair for Visitors.The back chairs for Visitors shall be low back chair. The arms of the chairs should be black. The chair shall be supplied with PU moulded seat and back. The under structure should be made of tubular cantilever type MS ERW tube black powder coated. The chair shall be supplied with fabric of approved make and shade for seat and back. Note -The back and base of the chair should be supplied with fabric upholstered . Overall Height of chair : 890 mm max.

Air Conditioning For Office Space Supply, installation, testing and commissioning of 2 TR Blue Star inverter type split A/C unit with stabilizer and out door unit stand (Rs. 1200/meter will be charged extra for copper pipe lining for more than 2 meters length.)Note: Cost for electrical and plumbing will be extra as per site conditions.

vavatraders