GENERAL-Karappuzha Canal-KRPMaintenance of Canal shutters of LBMC General Mechanical Work

Amount

Clearing of grasses from canals and periphery etc.

2.32:Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared.

Dismantling and taking out the 23 no.s of canal shutters from the grooves ,and erecting the same after cleaning, seal changing, painting etc.

OD23835/2022-2023:Dismantling and taking out Type 1 shutter(0.5m x 1.50 m) from the grooves and erecting the same after cleaning, seal changing and painting data for 1 shutter

OD23667/2022-2023:Dismantling and taking out Type 2 shutter(1.00 m x 1.50 m) and Type -3 shutter(1.50 m x 1.50 m) from the grooves and erecting the same after cleaning, seal changing and painting data for 1 shutter

OD23673/2022-2023:Dismantling and taking out Type 4 shutter(2.20 m x 1.50 m) and type-5 shutter (2.50 mx 1.5 m) from the grooves and erecting the same after cleaning, seal changing and painting data for 1 shutter

Providing additional base plates for anchoring the hoisting mechanisms

OD23681/2022-2023:The dismantling and re-erection of existing hoist units for shutters (sizes: 0.5x1.5m, 1.0x1.5m, 1.5x1.5m) which includes the demolishing of brick work(In cement mortar) manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.

5.2.2:Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up tot floor five level excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

5.9.2:Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

OD23682/2022-2023:Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges

OD23685/2022-2023:Supply of M.S bolt

OD23692/2022-2023:Fabrication and supply of Structural steel canal shutters ( Up to 2 tonne weight ) /Hoisting Bridge / Platform and accessories etc. for the same as per approved specifications, drawings and directions of deptl officer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc. complete but excluding cost of material already supplied

OD33088/2022-2023:Erection of the Canal Shutter ( up to 2 Tonne weight )/ hoist bridge/Platform including hand rails , ladder etc for the same including alignment correcting and setting complete including cost of all labour, machinery, incidental and conveyance , lead and lift charges etc complete but excluding cost of materials already supplied

Replacement of damaged base and nut, screw rods etc.

OD23856/2022-2023:Providing base and nut arrangement for hoisting the shutter including cost of all materials labour etc. complete

OD23859/2022-2023:Providing EN-8 screw rod 7.5 tonne capacity 4.00M lift screw hoist having one number of EN8 Screw shaft having a lifting speed of around 5.00 cm/min for 24 rpm of hand operation including cost of all material,labour,hire charges and conveyance

OD23863/2022-2023:Supply of M.S bolt

OD24593/2022-2023:Erection of the Canal Shutter ( up to 2 Tonne weight )/ hoist bridge/Platform including hand rails , ladder etc for the same including alignment correcting and setting complete including cost of all labour, machinery, incidental and conveyance , lead and lift charges etc complete but excluding cost of materials already supplied

Painting of shutters and hoisting mechanisms

85.114:Painting all the exposed surfaces of the gate and embedded parts with two coats of epoxy coal tar black paint confirming to IS14948 with a minimum film thickness of 150+/-5 microns per each coat over two coats of priming coat applied with zinc primer containing not less than 85% of zinc on dry film with a film thickness of 70+/-5 microns , so that the total film thickness of all coats including priming coat at any rate is not less than 350 microns after cleaning the surface using hand and power tool cleaning including cost of all materials, labour charges , cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

85.115:Cost of painting with 2 coats of enamel paint over 1 coat of zinchromate primer as per IS1477:1994 after hand and power tool cleaning including cost of all materials, labour charges, cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

Seal and seal clamp changing of type -1, type-2 , type-3, type -4 & type-5 shutters

OD28799/2022-2023:Dismantling of existing rubber seals of canal shutter and stacking at convenient place as per the direction of departmental officers at site

OD23836/2022-2023:Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges

OD25257/2022-2023:Fabrication and supply of Structural steel canal shutters ( Up to 2 tonne weight ) /Hoisting Bridge / Platform and accessories etc. for the same as per approved specifications, drawings and directions of deptl officer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc. complete but excluding cost of material already supplied

85.116:Supplying and fixing in correct position with specified initial interface the flat type rubber seal confirming to IS 11855 to the gates including cost of SS bolts and nut all labour and machinery and incidental and conveyance charges complete as per approved specification and drawing

85.117:Supplying and fixing in correct position with specified initial interface the Angular type rubber seal confirming to IS11855 to the gates including cost of SS bolts and nuts and all labour and machinery and incidental and conveyance charges complete as per approved specifications and drawings

Overhauling of hoisting mechanisms

OD23841/2022-2023:Overhauling of hoisting mechanisms of Type-1 (0.5mx1.5 m) ,Type-2 (1.00mx1.50 m ) and Type-3 (1.5m x 1.5) shutters

OD23842/2022-2023:Overhauling of hoisting mechanisms of Type-4 (2.2mx1.5 m) and Type-5(2.50m x 1.50 m )shutter s

Supply of materials, fabrication and painting of 2 nos of damaged canal shutters

OD23871/2022-2023:Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges

OD23883/2022-2023:Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

OD23884/2022-2023:Fabrication and supply of Structural steel canal shutters ( Up to 2 tonne weight ) /Hoisting Bridge / Platform and accessories etc. for the same as per approved specifications, drawings and directions of deptl officer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc. complete but excluding cost of material already supplied

85.114:Painting all the exposed surfaces of the gate and embedded parts with two coats of epoxy coal tar black paint confirming to IS14948 with a minimum film thickness of 150+/-5 microns per each coat over two coats of priming coat applied with zinc primer containing not less than 85% of zinc on dry film with a film thickness of 70+/-5 microns , so that the total film thickness of all coats including priming coat at any rate is not less than 350 microns after cleaning the surface using hand and power tool cleaning including cost of all materials, labour charges , cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

Fabrication, painting and erection of 14 nos of trash racks for Aqua duct, cut and covers, cyphon etc.

OD24357/2022-2023:Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges

OD24436/2022-2023:Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

OD24439/2022-2023:Fabrication and supply of Structural steel canal shutters ( Up to 2 tonne weight ) /Hoisting Bridge / Platform and accessories etc. for the same as per approved specifications, drawings and directions of deptl officer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc. complete but excluding cost of material already supplied

85.114:Painting all the exposed surfaces of the gate and embedded parts with two coats of epoxy coal tar black paint confirming to IS14948 with a minimum film thickness of 150+/-5 microns per each coat over two coats of priming coat applied with zinc primer containing not less than 85% of zinc on dry film with a film thickness of 70+/-5 microns , so that the total film thickness of all coats including priming coat at any rate is not less than 350 microns after cleaning the surface using hand and power tool cleaning including cost of all materials, labour charges , cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

OD24457/2022-2023:Erection of the Canal Shutter ( up to 2 Tonne weight )/ hoist bridge/Platform including hand rails , ladder etc for the same including alignment correcting and setting complete including cost of all labour, machinery, incidental and conveyance , lead and lift charges etc complete but excluding cost of materials already supplied

OD26096/2022-2023:Supply of M.S Bolt

Overhauling of 2 nos of gate valves

OD25199/2022-2023:Overhaling of existing gate valve after cleaning the same, greasing, changing the nuts and washers, supply of handle, cover plate and trail run as per directions from deptl. officers at site. Data includes cost of all materials, labour, conveyance etc.

P.Damodaran, G.R.Industries

Ashique Fabricators

Bidder Name

Ashique Fabricators

P.Damodaran, G.R.Industries

JOBIN JOSEPH