Renovation of water bodies Nr. Police Station Ward No. 7 in Tehsil and Distt, Kangra

Amount

Cutting of bushes / clearing jungle i/c uprooting of vegitables, grass, bushes, wood, trees and saplings of girth upto 30cm measured at height of 1.00 mtr above ground level and removal of rubbish upto distance of 20 mtrs out side the periphery of the area cleared upto 30cm girth complete within all leads and lifts.

Demolition of cutting of SR masonary matalled bitumenns and concrete road and pucca paver on or below G.L upto 1.50 meter depth including stacking of servicable material and disposal of unservicable material within 20 meter leads and including cutting the necessary reinforcement and seperating from R.C.C work upto 15 cm thickness Room-I complete within all leads and lifts.

Excavation in foundation trenches etc. (in pipes and pits) in all kinds of soil such as pick work, jumper work, blasting work soft /hard rock, chiesling soft /hard rock where blasting is prohibited, slushy, daldal and saturated soil I/c pumping or bailling out water with in all heights stacking the excavated soil with 15cm layer when required into plinth ,sides of foundations etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus earth as per direction of Engineer-in-Charge with in all leads and lifts .

Providing and laying cement concrete 1:4:8 (1 cement: 4sand: 8graded stone agg. 40mm nominal size)and curing complete excluding cost of form work in foundation and plinth within all leads and lifts.

P/L C.C. 1:2:4(1 cement:2sand: 4graded stone agg.20mm nominal size and curing complete excluding cost of form work in flat surface such as soffits of Suspended floors, roofs, landings shelves and their supports is balconies beams girders bressumers and cantilevers upto floor two level complete within all leads and lifts.

Providing tor /mild steel reinforcement for RCC work i/c bending,binding and placing in position complete upto floor two level within all leads and lifts.

Clearance of silt, sand, pabbles, wet Malwa etc. from Gallery/Well/ Pond & Chamber including pumping of bailing out water if required including all leads and lifts and disposal of the ame outside manual labour as per direction of Engineer-in-Charge complete within all leads and lifts.

Steel work welded in built up sections,trusses and framed work,including cutting ,hoisting ,fixing in position and applying a priming coat of red lead paint:- In grating, framed, guards, bars, ladders, railing, brackets & similar work within all leads and lifts.

Providing fixing of CGI sheet 0.63 mm thick prepainted steel sheets in roofing fixed with hot dipped matallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 micron primer coating of back coat of polystar of 5 mircon over 5 microns primer coating i/c fixing with iron J & L hooks nuts and bolts 6 mm dia with bituman washers and preprinted limpet fitted with rubber washer complete with all accesories as required as per the direction of Engineer - in- charge within all leads and lifts.

Providing and fixing ridge or hips 60 cm overall with 0.60 mm thick prepainted steels in roofing with hot dipped matallic zinc coated sheets with top coat of regular modified polystem organic coating of 20 micron over 5 microns primer coating over 5 micron fixing with prepainted iron J or L hooks, bolts & nuts 6 mm dia & prepainted GI limpet & bitumen washers complete with all accessories as required as per the direction of Engineer - in - Charge.

Providing and fixing M.S.B.P. sheet 1.66 to 2 mm thick in eaves board / facia / foffits ceiling including cutting, fixing & welding to steel roof member & applying a coat of red lead primer compleete as per the instruction of Engineer - in- charge. Within all leads and lifts.

Square rubble masonry coursed with hard stone of approved quality in foundation and plinth in Walls/ Pillar i/c raking out joints in cement mortar 1:4(1 cement: 4sand)within all leads and lifts.

Manufacturing and fixing of fencing pannel of size 1.80mx1.20mx25 of Jalli 25x 25mm MS mesh welded with MS black tube of 32mm dia 1.80m height of 14 gauge with MS flats 20x3mm including cutting welding painting with read oxide paint complete the fixed in jail of 25x25mm mesh should be fixed in 1.10x1.10m the work should be executed as per the entire satisfaction of the Engineer-in-Charge complete within all leads and lifts.

Providing form work with steel plates 3.15mm thick welded with angles iron in frame 30x30x5mm so as to give a fair finish i/c centring,shuttering,propping etc.height of propping and centring below supporting floor to ceiling not exceeding 4 mtrs.height of propping and centring below supporting removal of the same for in situ work in reinforced concrete & plain concrete work:-Vertical surfaces such as walls(any thickness)bartitions and the like i/c attached,pillasters buttresses and string courses and the like within all leads and lifts.

Applying priming coat over new steel and other metal based surface after and including preparing the surface by throughly cleaning oil dirt grease and other foreign matter sand papering and scoured with wire brushes fine steel wool scraper and sand paper complete within all leads and lifts.

Painting two coats excluding priming priming coat over new steel and other metal based surface with ready mix paint and brushing to five an even shade including cleaning oil dirt grease and other foreign matter complete within all leads and lifts.

Providing and fixing white glazed tiles 6mm thick in flooring, treads of steps and landing laid on the bed 12mm thick CM 1:3 (1cement 3Sand) finished with flush pointing in white cement.

Brick masonry using common burnt clay building bricks in cement mortar 1:6 (1 cement: 6sand) complete within all lead and lifts.

15 mm thick cement plaster in single coat on rough side of concrete walls for interior plastering up to floor level two level ioncluding arrisis, intarnal rounded angels not exceeding 80mm in girth and finished smooth, cement mortar 1:4 ( 1 cement :4 sand ) with in all leads and lifts.

Vinod (BID ID -541786)

PARVESH KUMAR GOVT CONTRACTOR (BID ID -541809)