A/R and M/O Nahan Dadahu Haripurdhar road km 36/00 to 87/00

Amount

Earth work in excavation for structures in all depths as per drawing and Technical specification of Ministery of Rural Development for rural roads August 2004 (Two thousand four) C-305-1(Clause-three hundred five point one) including setting out construction of shoring and bracing, removal of stumps and other deleterious materials including dressing of sides and botttom and back filling in tranches with excavated suitable materials all work of rock cutting by blasting shall be carried out by taking all necessry precaution against soil erosion damages to hill side water pollution etc. and to protect stability of hill side rock shall be excavated with chiesling and wedging out rock (where blasting is prohibited) all earth work in cutting.excavation including rock excavation shall be carried out true to lines grades,side slopes, width, camber super elevation and level as shown on the drawings or as directed by the Engineer-in-Charge hauling and stacking of materials useful for construction at suitable sites and safe disposal of unsuitable cut materials by all modes of transportations in all leads and lifts at specified places, in specified manner systemathically with due consideration to avoiding adverse effects on environment, trimming filling of unevenness blind age and finishing of the road to specified dimension to the entire satisfaction as directedby the Engineer-in-charge. If the foundatioin of the structure is in an area with stangnat water or water is met with in the excavation due to spring seepage rain and other courses it shall be remove by suitable diversion boilingout or pumping as directed and the area of foudation or embankment shall be kept dry any loss to the public or private property during the course of excavation shall be the sole responsibility of the contractor which shall have to be duly compensated by him at his own cost in all cases.

Providing concrete for plain/reinforced concrete in open foundatiions complete as per drawing and techical specification clause 802,803 1202. &1203 in RCC Grade M20 , including all leads,lifts and carriage of materials as per HP.PWD specification including hauling of material in all leads, lifts as per the entire satisfaction and direction of Engineer-in-charge

Supplying,fitting and placing with MS bar reinforcement in substructure complete as per drawings and techical specification clauses 1002,1005,1010 & 1202,including all leads,lifts and carriage of materials as per HP.PWD specification including hauling of material in all leads, lifts as per the entire satisfaction and direction of Engineer-in-charge

Back filling behind abutment, Wing wall &Return wall complete as per drawing and technical sepecification clause 1204.3.8 including carriage of materials with in all leads,lifts and other incidentals complete as per entire satisfaction of the Engineer-in-charge.

Providing weep holes in brick masonry/stone masonery plain/reinforced concrete abutment wing wall ruturn wall with 100mm dia AC pipe extending throught the full width of the structure with slopes of i(V):20(H) towards drawing face complete as per drawing and technical specification clause 614,709,1204.3.7 . including hauling of material in all leads, lifts as per the entire satisfaction and direction of Engineer-in-charge .

atma ram