Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹12.2 CrAWARDED | ₹12.2 Cr | AWARDED |
Tender Value
₹10.3 Cr
EMD Value
₹10.3 L
Closing Date
8 Sept 2025, 9:30 pmClosed
Karnataka Industrial Areas Development Board
Providing Power Infrastructure facilities to Kyadiguppa Industrial Area, Kushtagi Taluk, Koppal District.
217853
KIADB/2025-26/EL/WORK_INDENT323
Open
Electrical
KIADB Head Office Bangalore
₹7,500
₹10.3 L
21 Aug 2025
21 Aug 2025
9 Sept 2025
25 Aug 2025
26 Aug 2025
Providing Power Infrastructure facilities to Kyadiguppa Industrial Area, Kushtagi Taluk, Koppal District.
PART - A Station Breaker :
Supply of 11 kV PCVCB, 500 MVA, 25 kA, 1250 A incomer 800 A feeder Feeder Panel with all lead and lifts complete as per specifications and directions of engineer in charge ...
Supply of Annunciator Panel for the following combinations 1I/c + 4F + 1CB with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Supply of 19Core 2.5sqmm control cable with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Supply of 10Core 2.5Sqmm control cable with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Supply of 4 core 6sqmm control cable with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Supply of 2 core 6 sqmm control cable with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Supply of 4core 2.5sqmm control cable with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Supply of Earthing name plate & DP feeder name plates including printing of letters painting and board for new earthing pits with stack ( 1 DP earthing name plate & 1 for feeder name plate) with all l...
Supply of Rubber mats 1000mmX2000mmX12mm size tested for 15KV class with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Supply of Earth bond 450mm long as per KPTCL with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Grounding of equipment by providing cast iron pipe of 100mm ID 13mm thickness 2.75Mtr long with two part clamp out of GI flat 50x6mm continuasly welded around the pipe using cast iron welding electrod...
Labour charges for Erection, alignment and fixing to the foundation, indoor / outdoor 11KV switchgear panel /unit including movement from the point of unloading to the point of erection I. 11kv indoor...
Erection of annunciator control panel, auxiliary panel, carrier cabinet, marshalling bay kiosketc., alignment and fixing properly to foundation base including movement from the point of unloading to t...
Grounding of equipment by providing cast iron pipe of 100mm ID 13mm thickness 2.75Mtr long with two part clamp out of GI flat 50x6mm continuasly welded around the pipe using cast iron welding electrod...
Grounding of equipment with 50x6mm GI flat and connecting to the equipment to the earth mat / ground pit. Each point of earthing with all formation works like bending, twisting, drilling of holes and ...
Supplying & providing 450 mm dia 450 mm height 1.5 to 2 thick hume pipe collar (non pressure type) for earth pits with all lead and lifts complete as per specifications and directions of engineer in c...
Laying of control cables from rquipment to control panels & end terminals with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Testing and commisioning :
wiring: identification of wires, ferrulings, crimping & termination wiring: identification of wires, testing of realys CTs & PTs & breakers for operation ii) for each additi...
Wiring & assisting in testing & commissioning at 11KV indoor/outdoor switchgear with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Wiring & assitinig in testing & commssioning at 11Kv annuacation desk for 1 no of switchgear with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Civil portion: Extension of 11KV switch gear panel bed:
Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of buildings & bridges ...
Providing and laying in position cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregate as per relevent IS codes ...
Providing and laying in position cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregate as per relevent IS codes ...
Providing size stone masonry with hard stone in foundation & plinth with cement mortar1:6 ( 1 cement 6 coarse sand) with all lead and lifts complete as per specifications and directions of engineer in...
Fabrication, supply & centering M S angular struss for all spans as per approved designs and drawings providing framed work, including cutting, hoisting, fixing in position and applying a priming coa...
Providing and laying to required line and slope roofing with corrogated asbeestos cement sheet 6mm thicj fixed with galvanized iron J or L hooks botls and nits 8mm dai CI plain and bitumen washers ov...
Providing and fixing structural steel work riveted, bolted or welded in bulk up sections, trusses and framed work, including cutting hoisting fixing in position and applying a priming coat of approved...
Refilling and consolidation with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40 mm dia 2.9 mm thick 2.5m long GI pipe with GI funnel with mesh and suitable size reducer fixed o...
Supplying and running GI/copper conductor for grounding and ( along with other wires in conduit system of wiring) using necessary suitable size clamps nails guttas/spacers etc., with all lead and lift...
PART-B Providing DP Structure :
Supplying of DP structure using 9 Mtr long RCC poles for 145kg WL with all lead and lifts complete as per specifications and directions of engineer in charge of the wor...
Supply of RCC Pole - 8 Mtr Long, 115 Kg WL with all lead and lifts complete as per specifications and directions of engineer in charge of the work. for Stud
Supply of 11KV 400 amps GOS double break with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Supply of ‘H’frame for mounting GOS 11KV 400A Double break with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Supply of 11KV 70/90KN disc insulator with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Supply of Guy set complete with No. 15 strain insulator with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Supply of spiral earth electrodes with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Supply of 11 KV 45kN polymeric pin insulator with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Supply of Strain Clamp, 3 Bolt type for 70/90 kN Disc Insulator with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Supply of PG clamps Coyote conductor with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Supply of Fish Plate with necessary Clamps, bolts & nuts etc complete (Galvanised) with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Supply and fixing Anti-climbing device 12 Mtrs barbed wire with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Supply and fixing caution/board with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Providing Earthing materials pipe type for grounding (Single Electrode with accessories) with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Erection of DP structure using 9 Mtr long RCC poles with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Erection of RCC Pole - 8 Mtr Long, 115 Kg W for Stud with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Fixing Guy set complete with No. 15 strain insulator with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Fixing spiral earth electrodes with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Fixing of 11 KV 400 A GOS double break with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Fixing of ‘H’ frame for mounting 11 KV 400A GOS double break with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Making of Earthing materials pipe type for grounding (Single Electrode with accessories) with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Part - C Supplying & Laying of 11KV 3C X 400 sqmm XLPE UG Cable:
Supplying of 11 KV (E) 3 Core 400 Sqmm, (51 GI Wires - 4 mm Dia), XPLE HTUG Cable with pressure extruded inner sheeth, ROUND WIRE ARMOU...
Supplying of HT heat shrinkable push on type 11KV 3 core 400 sqmm XLPE UG cable Indoor/Outdoor termination kit with all lead and lifts complete as per specifications and directions of engineer in char...
Supplying of HT heat shrinkable push on type 11KV 3 core 400 sqmm XLPE UG cable Indoor/Outdoor termination kit with all lead and lifts complete as per specifications and directions of engineer in char...
Supplying of HT heat shrinkable straight through joint kit for 11KV 3 core 400sqmm XLPE UG cable with all lead and lifts complete as per specifications and directions of engineer in charge of the work...
Supply of manufacture sand for spreading and forming alround the UG cable with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Supplying of Bricks cable covering tiles 250x125x40mm or 125x125x40mm with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Supplying of ‘B’ class 100mm dia GI pipe for culvert crossing and cable raising with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Supplying of route and joint indicating stone connected with MS anchor rods with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Laying of UG cable by Trench less technology by adopting horizontal boring and drawing of cables including preparation at site with all lead and lifts complete as per specifications and directions of ...
Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depthnot exceedin g 300mm as per drawing and te...
Cable trench excavation with all lead and lifts complete as per specifications and directions of engineer in charge of the work. In Ordinary Soil
Laying of high tension 11 KV(E) 3 core 400 sqmm in existing trench/GI pipe/stone ware/RCC Hume pipe using wooden aluminum rollers as directed by the departmental staff with all lead and lifts complete...
Refilling and consolidation with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Making and fixing for 11 KV(E) 3 Core 400sqmm heat shrinkable type pot head (indoor / out door) with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Making and fixing for 11 KV (E) 3 core 400 sqmm heat shrinkable type straight through joint with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Spreading and forming with sand all round the cable to a depth of 75mm and width of 500mm with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Covering the tiles 250x250x40mm for 3 core 400sqmm XLPE UG cable with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Laying the GI pipe 80mm to 150mm dia at Drainage water supply crossing including fixing collars, bends tees and other fitting with cuts and threads wherever necessary with all lead and lifts complete ...
Fixing of route and joint indicating stone connected with MS anchor rods with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Part - D Providing RMUs & OD's 350MVA, 630Amps:
Supply of Compact RMU (VCB/SF6 Type) with
Copper Busbar, 350 MVA, 630 Amps as per IEC-62271/IS-3427 3Way RMU, 2 OD + 1 VL (One Incomer + One Breakers + ...
Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40 mm dia 2.9 mm thick 2.5m long GI pipe with GI funnel with mesh and suitable size reducer fixed o...
Supplying & running of GI/Copper strips for grounding connections, using necessary fixing materials as required with all lead and lifts complete as per specifications and directions of engineer in cha...
Earth Excavation for RMU Foundation Depositing of earth on Bank up to a lead of 50 Mtr and with a lift up to 1.5 Mtr with all lead and lifts complete as per specifications and directions of engineer i...
Concreting with CC 1:2:4 [M-15] Using 20mm Nominal size graded crushed coarse aggregates with all lead and lifts complete as per specifications and directions of engineer in charge of the work. for c...
Supply, fitting and placing MS reinforcement with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Providing and fixing G.I Chain link fabric fencing of required width in mesh size 50 x 50 mm including strengthening with 2mm dia wire or nuts, bolts and washers as required with all lead and lifts co...
Supplying and fixing MS Rectangular Angle of size 65X65X6mm fixed in cement cocrete 1:2:4 with 2 numbers of 16mm dia MS holdfast rods for a length of 25cm including cost of all materials, bending, cut...
Fixing foundation frame of channels and angle iron welding fixing in concrete aligning the RMU on foundation bed, assembly of units, connecting Bus Bars from panel to panel initial filling of oil etc....
Lettering the RMU with enamel paint and also writing single line diagram of each panel, caution Board, Danger Board etc., including cost of Paint, Brush etc., with all lead and lifts complete as per s...
Part - E Extension of HT/LT lines:
Supply of RCC Pole - 9 Mtr Long, 145 Kg WL with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Supply of Pre-Stressed Tubular Spun Pole - 11 Mtr Long, 500 Kg WL with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Fabrication,galvanizing and supply of M+6 Type Lattic Structure Tower Materials With 6 cross arms for 11 KV lines (Each=2.24MT ) with all lead and lifts complete as per specifications and directio...
Supplying of Galvanized bolts & nuts (Each=0.105MT) with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Danger Plates with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Grounding of Tower G.I.Type Pipe Earthing with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Providing V-Shape X arm for 33 kV with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Supply of RCC Pole - 8 Mtr Long, 115 Kg WL with all lead and lifts complete as per specifications and directions of engineer in charge of the work. for Stud
Supply of 11 kV, Horizontal Cross Arm - Mild Steel (MS) with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Supply of LT 4 Pin Cross Arm - MS with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Supply of 11KV 70/90KN disc insulator with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Supply of 11 kV, 5 kN Composite/Polymeric Pin Insulator (24 mm dia FRP Rod) with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Supply of 1.1 kV Ceramic Pin Insulator (Shell only) with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Supply of No. 8 Strain Insulator with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Supply of Guy Set Complete with No. 15 Strain Insulator & Concreting materials with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Supply of Spiral Earth Electrode with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Supply of ACSR Coyote ACSR with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Supply of Rabbit ACSR Conductor with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Supply of PG clamp for Coyote conductor with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Bed Concreting with CC 1:2:4 [M-15] Using 20mm Nominal size graded crushed coarse aggregates , Spun pole concreting with all lead and lifts complete as per specifications and directions of engineer in...
Supply of PG clamp for Rabbit conductor with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Erection of 11mtr long Spunpole in a pit of 1.8 Mtr depth with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Fixing and erection of M+6 Type Lattic Structure Tower Materials With 6 cross arms for 11 KV lines with all lead and lifts complete as per specifications and directions of engineer in charge of th...
Fixing of Galvanized bolts & nuts with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Fixing of Grounding of Tower G.I.Type Pipe Earthing with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Erection of RCC/PSCC Pole of 9 to 10 Mtr long in a pit of 1.8 Mtr depth with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of buildings & bridges and such similar works in all kinds of soils, as per dra...
Providing and laying in position cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregate as per relevent IS codes ...
Sorting of tower parts made of fabricated angle iron with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Setting of Stubs templates and alignement with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Revetting of Bolt nuts above 3 mts long with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Welding of Bolt & nuts above 3 mts long with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Erection of RCC Pole - 8 Mtr Long, 115 Kg W for Stud with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Fixing of Horizontal cross arm and LT 4 pin corss arms including Single Top Support Brace and Insulator fixing with all lead and lifts complete as per specifications and directions of engineer in char...
Fixing of Guy Set Complete with No. 15 Strain Insulator & Concreting materials with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Fixing of Spiral Earth Electrode type earthing (without charcoal, salt etc.,) with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Stringing of Coyote ACSR conductor, binding of conductor on each insulator and dead ending on strain or disc/strain insulator by means of clamps with all lead and lifts complete as per specifications...
Stringing of Rabbit ACSR conductor, binding of conductor on each insulator and dead ending on strain or disc/strain insulator by means of clamps with all lead and lifts complete as per specifications...
Part F: Providing Transformer center on Double Pole structure:
Supply of DP Transformer Structure using RCC Pole - 9 Mtr Long, 145 Kg WL with all lead and lifts complete as per specifications and dire...
Supply of 11 kV, 5 KN Polymeric Pin Insulator (24 mm Dia FRP Rod) with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Supply of 11 kV, 45 KN Polymeric Insulator with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Supply of Guy Set Complete with No. 15 Strain Insulator & Concreting materials with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Supply of 11kV/433V, 250 kVA, 3 Phase, 50 Cys Distribution Transformer BEE - 5 Star Rated with oil with all lead and lifts complete as per specifications and directions of engineer in charge of the wo...
Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40 mm dia 2.9 mm thick 2.5m long GI pipe with GI funnel with mesh and suitable size reducer fixed o...
Supply of Caution/Danger Board with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Supply of Anti Climbing Device (12 Mtr GI Barbed Wire) with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Supply of GI Wire 8 SWG with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Supply of Guy wire 7/10 SWG with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Supply of Al Lead Wire - 240 Sqmm with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Supply of Heavy Duty Long Barrel Copper Lug-240 Sqmm with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Supply of PG Clamp - Rabbit to 240 Sqmm with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Supply of Spacer for DTC Wiring with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Supply of Fish Plate with necessary Clamps, bolts & nuts etc complete (Galvanised) with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Supply of LT Metering box with CTs and necessary wiring for housing ETV Meter with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Supply of LT Electronic Tri-Vector Meter 5 Amps, -0.5/1.0 Accuracy Class with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Supply of 11 kV Lightning Arrester, Metal Oxide 9 kV, 5 kA Polymeric type with ground disconnector with all lead and lifts complete as per specifications and directions of engineer in charge of the wo...
Supply of LT Distribution box for 250 kVA with MCCB with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Supply of 11 kV, Solid Core Type HG Fuse Unit with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Supply of H-Frame for mounting GOS with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Supply of 11 kV, 200 Amps, Single Break GOS with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Labour charges for erection 11kV/433V, 250 kVA, 3 Phase, 50 Cys Distribution Transformer BEE - 5 Star Rated with oil with all accessories with all lead and lifts complete as per specifications and dir...
Download all tender documents and submit your bid