C/o balance work of Addition/Alteration to Truma Centre in Dr. R.P.G.M. College at Tanda in Distt. Kangra (HP.) (DEPOSIT WORK).(SH -Providing and fixing kota stone, floor tiles, wall tiles, G.I. clip in metal ceiling, painting, WS and SI etc

Amount

Providing and laying Kota stone slab 25 mm (Twenty five milimetres) thick in step side risers of steps, skirting dado and pillars laid on 12 mm (Twelve milimetres) (average) thick cement mortar 1:3 (One cement: Three sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs including making noising rubbing and polishing complete as directed by the Engineer-Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and laying Duro stone vetrified tiles 300x300mmx10mm (Three hundred into three hundred into ten millimeters) thick in grey/coloured or of approved shade in flooring, treads of steps and landing laid on a bed of 12mm (Twelve millimeters) thick cement mortar 1:3 (One cement : three sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete as directed by the Engineer-Incharge, including carriage of materials within all leads, lifts and other incidentals

Providing and fixing wall tiles 6mm (Six milimetres) thick Kazaria/Nitco/Rak in walls etc; in skirting, risers of steps and dado for all heights and 12mm (Twelve milimetres) thick with cement mortar 1:3 (One cement ; Three sand ) and jointed with white cement slurry and as directed by the Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing anti skid water proof stain and impect resistent heavy duty vetrified tiles Nitco/Rak or its equivalant 300x300mmx10mm (Three hundred into Three hundred into ten millimetres) manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm (Twelve millimetres) thick cement mortar 1:3 (One cement : Three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete, as directed by the Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface as per the directions of Engineer-In-Charge including entire carriage of materials within all leads, lifts and other incidentals.

Removing dry or oil bound distemper by washing and scraping and sand papering the wall surface smooth including necessary repairs to scratches complete, as directed by the Engineer-Incharge, including carriage of materials within all leads, lifts and other incidentals.

Wall painting (one coat)with plastic emulsion paint of approved brand and manufacture on decorated wall surface to give an even shade including thoroughly brushing the surface clean of all dirt grease,loose pieces of scale and sand papered smooth complete as per directed by the Engineer-Incharge, including carriage of materials within all leads, lifts and other incidentals

Extra over item No. 7 for every sub sequent coat of wall painting with plastic emulsion paint of approved brand and manufacture complete and as per directed by the Engineer- Incharge, including entire carriage of material within all leads, lifts and other incidentals.

Removing old paint from steel and other metal surfaces & making the surface even with paint remover of approved brand and manufactureas per directed by the Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals

Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equarlied on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth complete within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge.

Supplying and fixing 5mm (Five millimetres) thick plain glass panes with putty and nails including removal of broken glass panes wherever necessary as directed by the Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 100mm (One hundred milimetres) bright finished brass floor door stopper with rubber cushion screws etc. to suit shutter thickness complete as directed by the Engineer- Incharge, including carriage of material within all leads, lifts and other incidentals

Providing and fixing anodized aluminium sliding door bolts anodized transparent or dyed to required colour and shade with necessary screws etc. complete within all leads, lifts of materials and other incidentals.

300x16mm size (Three hundred into sixteen milimetres)

250x16mm (Two hundred fifty into Sixteen milimetres) size

Providing and fixing aluminum oxidized PILOT/ Sheel or equivalant Tower bolts (Barrel type) anodized transparent or dyed to required colour and shade with necessary screws etc; complete including entire carriage of materials within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge.

250x10mm (Two hundred into Ten milimetres) size

200x10mm (One hundred fifty into Ten milimetres) size

Providing and fixing aluminum oxidized PILOT/ Sheel or equivalant Tower bolts (Barrel type) anodized transparent or dyed to required colour and shade with necessary screws etc; complete including entire carriage of materials within all leads, lifts and other incidentals as per approved drawings, design and as directed by the Engineer-in-Charge.

125mm (One hundred twenty five milimetres) size

100mm (One hundred milimetres) size

Providing and fixing 1st class indian teak wood plain square edged cover fillets (beading) 60mmx12mm (Sixty into twelve millimetres) section with wood screws in ceiling and lining including mitring at junctions within all leads, lifts of materials and other incidentals.

Providing and fixing Gl Clip in Metal Ceiling System of 600x600 mm module which includes providing and fixing 'C' wall angle of size 20x30x20 mm made of 0.5 mm (Zero poin fice millimetres) thick pre painted steel along the perimeter of the room with help of nylon sleeves and wooden screws at 300 mm (Three hundred millimetres) center to centre, suspending the main C carrier of size 10x38x10 mm made (Ten into thirty eight into ten millimetres) of G.I steel 0.7 mm (Zero point seven millimetres) thick from the soffit with help of soffit cleat 37x27x25x1.6 mm(Thirty seven into twenty seven into twenty five into one point six millimetres), rawl plugs of size 38x12 mm (Thirty eight into twelve millimetres) and C carrier suspension clip and main carrier bracket at 1000 mm one thousand millimetres centre to centre inverted triangle shaped Spring Tee having height of 24 mm (twenty four millimetres) and width of 34 mm (thirty four millimetres) made of Gl steel 0.45 mm (zero point forty five) thick is then fixed to the main C carrier and in direction perpendicular to it at 600 mm (Sxi hundred millimetres) centers with help of suspension brackets. Wherever the main C carrier and spring T have to join, C carrier and spring T connectors have to be used. All sections to be galvanized @ 120 gms/sqm (One hundred) (both side inclusive), fixing with clip in tiles into spring T with GI Metal Ceiling Clip complete including entire carriage of materials within all leads lifts and other incidentals and as directed by the Engineer-in-Charge.

Providing and fixing MS plain grills of required pattern in steel frames of windows and ventilators etc with M. S flat 20x5mm (Twenty into five millimetres) and 8x8mm (Eight into eight millimetres) solid square or round bars with round headed bolts and nuts etc. or by screws complete including carriae of material including carriage of material as per directed by the Engineer-in-charge including entire carriage of materials within all leads, lifts and other incidentals.

Providing and fixing PTMT jet spray of approved quality and colour with 1.00m (One metre) tube complete as directed by the Engineer-incharge, including carriage of materials within all leads, lifts and other incidentals

Providing and fixing chromium plated brass soap dish of IS marked No. 8931 & 8934 with C.P brass brackets fixed to wooden cleats with CP brass screws complete and stacking upto any lead as directed by the Engineer-Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing Flat back type of size 430x 260x350mm (Four hundred thirty into two hundred sixty into three hundred fifty millimetres) vitreous China bowl pattern urinal including connection the urinalwith waste pipe by means of white lead mixed with chopped hemp (waste pipe to be measured and paid for separately including entire carriage of materials within all leads, lifts and other incidentals.

Providing and fixing PTMT Coloured/white high density polyethylene / poly propylene 10.00 ltrs (Ten litres) capacity (Full flush) European standard control low level flushing cistern with fittings with a pair of brackets with fittings such as lead valve, syphon, 15mm (Fifteen millimetres) nominal size PVC ball valve with polythene float, with push button, couplings for connections with inlet, outlet and over flow pipe, 40mm (Forty millimetres) dia C.P. flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (overflow pipe to be measured and paid for separately) as directed by the Engineer- in-Charge including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing vitreous China wash down, water closet (Wall hanging type. W.C. pan) with integral 'P' or 'S' trap including jointing the trap with soil pipe in cement mortar 1:1(One cement : One sand) Angle Indian Universal closet (Seat and over to be measured and paid for separately complete and as directed by the Engineer-Incharge, including carriage of materials within all leads, lifts and other incidentals..

Providing and fixing hydraulic door closer single acting complete and as directed by the Engineer-Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing floor machine etc. complete and as directed by the Engineer-Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and laying glass wool over ceiling complete and as directed by the Engineer-Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing eye hook complete and as directed by the Engineer-Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing PVC flooring complete and as directed by the Engineer-Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing granite moulding complete and as directed by the Engineer-Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 25mm dia G.I. pipe complete and as directed by the Engineer-in-Charge, including entire carriage of material within all leads, lifts and other incidentals.

Providing and fixing centre hole mixture complete and as directed by the Engineer-Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing aluminium window lock complete and as directed by the Engineer-Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing S.S. pelmets rods 20mm (Twenty millimetres) complete and as directed by the Engineer-Incharge, including carriage of materials within all leads, lifts and other incidentals.

Kulbir Kumar