PROVN OF UNDERGROUND AND SEMI UNDER GROUND BUNKER AT 14 ENGR REGT UNDER GE 969 EWS

Excavation over area by mechanical means (Hydraulic excavator ) means over areas ( exceeding 30 cm in depth, 1.5 m in width as well as 10 Sqm on plan) in all kinds of soil including getting out,complete all as specified and as directed.

All as per Ser No 1 above but 1.5 m to 3 m deep,complete all as specified and as directed.

All as per Ser No 1 above but over 3 m deep,complete all as specified and as directed.

M&L for Cement concrete Type C2 1:3:6 (using 40 mm graded aggregate) in foundations, fillings and mass concrete,complete all as specified and as directed.

M&L for RCC Design Mix M-30 as in foundations, including rafts, footings foundation beams: plinth beams: bases for columns, etc. basement slabs, under- reamed piles and mass concrete, complete all as specified and as directed.

M&L for RCC Design Mix M-30 as in walls, basement walls, ballast walls and the like:any thickness: above top of footings, including attached pilasters and buttresses,complete all as specified and as directed.

M&L for RCC Design Mix M-30 as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like,complete all as specified and as directed.

M&L for RCC Design Mix M-30 as in beams, cantilevers, bressummers, lintels over 105m span,complete all as specified and as directed.

M&L for RCC Design Mix M-30 as in columns, pillars, piers, posts and struts,complete all as specified and as directed.

M&L for Formwork to sides of concrete foundations, footings, bases of colums, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work, vertical or to batter,complete all as specified and as directed.

M&L for Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc; vertical or to batter,complete all as specified and as directed.

M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; exceeding 200mm thick (Horizontal or sloping ),complete all as specified and as directed.

M&L for Formwork to sides of pillars, posts,struts, piers, columns and stanchions,complete all as specified and as directed.

S&F for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and bliding with and including mild steel wire (annealed) not less than 0.9mm dia or or securing with clips,complete all as specified and as directed.

S&F for Mild steel TMT bars 5 to 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for stirrups, spacers and binders and binding with and including mild steel wire (annealed) not less than 0.9mm dia or or securing with clips,complete all as specified and as directed.

M&L for Roof treatment to concrete surfaces by using EPDM sheet,complete all as specified and as directed.

M&L for Forming embankments including raising (or lowering) earth, spreading in layers n exc.30 cm thick; watering ramming/rolling and finishing to required size, shape, etc. n exc 1.5m high from base,complete all as specified and as directed.

M&L for 40mm thick Cement concrete type B-1,1:2:4 (20mm graded aggregate) as in floor,complete all as specified and as directed.

M&L for rendering 10mm thick in CM 1:6 on fair faces of brick work or concrete surfaces,complete all as specified and as directed.

M&L for rendering 10mm thick in CM 1:3 on fair faces of brick work or concrete surfaces in ceiling,complete all as specified and as directed.

M&L for 03 coats of whitewash on newly plastered surfaces of wall including preparation,complete all as specified and as directed.

M&L for 03 coats of whitewash on newly plastered surfaces of ceiling including preparation,complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm,complete all as specified and as directed.

Removing excavated material exc. 1.50 km but n exc. 5 km and depositing,complete all as specified and as directed.

S&F Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors or fixed to walls,complete all as specified and as directed.

S&F Framed work such as grills gratings etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165,complete all as specified and as directed.

S&F for plates (plain or chequered ) channels or MS Sheets, square cut or notched (ordinary and counter sunk) forming holes, without any attachment,complete all as specified and as directed.

M&L for 100 mm thick cement concrete type C-2, 1:3:6 as in plinth protection,complete all as specified and as directed.

M&L for Hardcore of guage n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface,complete all as specified and as directed.

S&F 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floor, complete all as specified and as directed.

S&F 75mm dia PVC (SWR) spout pipes single socketed, in any length with rubber ring joints, laid in trenches or in floor, complete all as specified and as directed.

Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in any type of hard/dense soil,complete all as specified and as directed.

Add or deduct to item No 32 above for each 3 cm or part

Removal of surplus soil to a distance exc 50m but not exc 250, complete all as specified and as directed.

Rolling consolidating formation surfaces in earthing with power roller exc 8 & n. exc 12 tonne, complete all as specified and as directed.

M&L for 200mm thick soling (or sub base) with broken stone, surface formed and rolled consolidated over and incl Rolling on Soling of broken boulders, complete all as specified and as directed.

M&L for 7.5cm thick (compacted thickness) WBM, with Granite, trap or basalt coarse aggregates of grading 2 (63 to 40mm size) or of grading 3 (50 to 20mm size), spread, rolled and consolidated to gradient and camber required for 150mm thickness over and incl Rolling on Waterbound, complete all as specified and as directed.

M&L for 100mm thick PCC 1:4:8 D2 using 40mm graded stone aggregate as in foundation filling and mass concrete, complete all as specified and as directed.

M&L cement concrete work in pavement/ hardstanding of flexural strength 40kg/Sqm in field using 400 kg of cement par cubic meter thickness of concrete 150mm thick, complete all as specified and as directed.

M&L for Three coats of Painting lines, dashes, arrows letters etc on roads pavements and the like n. exc 10cm wide with road making paint white or golden yellow on road, complete all as specified and as directed.

M&L for Forming contraction (dummy) joint 25mm deep x 100mm wide filled with sealing compound of grade 'A', complete all as specified and as directed.

M&L for Forming construction joint 39-40mm deep x 10mm wide filled with sealing compound Grade 'A', complete all as specified and as directed.

M&L for forming 12mm thick 15cm deep Expansion joints filled with pre formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade 'A', complete all as specified and as directed.

M&L for Moorum filling in floors or pavings, laid in layers n. exc 15cm thick, spread, levelled and rammed including watering as in road berms, complete all as specified and as directed.

M&L for point wiring for using 1.5 sqmm nominal cross section area copper conductor multistandard PVC unsheathed, FRLS cable in and including using PVC casing caping not less than 25mm size and fittings including PVC box with suitable size of pvc sheet for top cover (ISI marked) fitted with chromium plated steel screws and washer and 1.5 Sqmm nominal cross section area multistandared copper conductors FRLS green PVC insulated unsheathed earth wire and connecting to earth dolly using color code as per IS including terminal boxes suitable for fixing socket and switches all as specified as directed by engineer in charge. Make : Anchor/ Havells/ Finolex/ Polycab

One light point/fan point/Ex fan point controlled by one 5 Amps switch one way

One 3 pin 5 Amp switch socket outlet on independent board

One 3 pin 5 Amp switch socket outlet on same board with accessories

M&L for point wiring for using 2.5 sqmm nominal cross section area copper conductor multistandard PVC unsheathed, FRLS cable in and including using PVC casing caping not less than 25mm size and fittings including PVC box with suitable size of pvc sheet for top cover (ISI marked) fitted with chromium plated steel screws and washer and 2.5 Sqmm nominal cross section area multistandared copper conductors FRLS green PVC insulated unsheathed earth wire and connecting to earth dolly using color code as per IS including terminal boxes suitable for fixing socket and switches all as specified as directed by engineer in charge. Make : Anchor/ Havells/ Finolex/ Polycab

S&F switch piano Flush type, single pole, one way 5 amp 240 volts, complete all as specified and as directed.

S&F switch piano Flush type, single pole, 15 amp 240 volts, complete all as specified and as directed.

S&F Socket outlet 2 in 1, 3 pin, 5 Amps, flush type complete all as specified and as directed.

S&F Socket outlet 2 in 1, 3 pin, 5 and 15 Amps, flush type complete all as specified and as directed.

Supply and fix ceiling rose 3 terminal / PVC/ Polycarbonate, isolated body,complete all as specified and as directed.

S&F Lamp Holder, PVC/ Polycarbonate type with back plate suitable for batten fitting ,complete all as specified and as directed.

S&F Distribution Board, SPN 4 Way, Double door complete all as specified and as directed.

S & F MCB,SPN 40-63 Amps 240 Volts B curve, complete all as specified and as directed.

S & F MCB Single pole 6-32A Amps 240 Volts B Curve, complete all as specified and directed.

S&F exhaust fan/brisk air fan of size 450 mm sweep, metallic body,complete all as specified and as directed.

Supply and fix LED Lamp 12 W Inverter type,complete all as specified and as directed.

Supply and fixing in wall mounted fans 300 mm swing high speed, 230 volts, 50 HZ, AC connecting up including provision of cable from connector to fan,complete all as specified and as directed.

Supply and fixing LED lights fitting 1x 20W, 220V, AC LED tube light connecting up with flexible copper conductor cable of suitable size from ceiling rose,complete all as specified and as directed.

M&L for Earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanized earth wire of 4 mm dia (up to 7.5 m in length from earth plate ) by means of bolts and nuts checknuts and washers of galvanized iron or steel all as specified and shown in electrical plate no.3 of SSR part I including necessary excavation and earth work in any type of soil PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 40 mm thick cover with MS rod 8mm dia at 150mm c/c in both ways as reinforcement, watering funnel, 20 mm dia light grade for protection of earth electrode, 20 mm dia GI pipe light grade for watering complete all as specified and as directed by Engineer in charge and tested on completion. Note : The rate is inclusive of necessary earth work, RFR and removal etc

Supply ,Laying ,connecting/ Jointing,charging, testing and commissioning LT cable electric, XLPE insulated, armoured, PVC sheathed, heavy duty, electric cable 1100 Volt grade with stranded aluminum conductor of size 10 sq mm 2 Core,complete all as specified and as directed.

Removing excavated material not exceeding 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point, complete all as specified and as directed.

Excavation in trenches not exc 1.5 metre wide and not exceeding 1.5 meter in depth for foundations, laying of pipes etc not exceeding 10sqm on plan for manholes etc and not exceeding 1.5 metre in depth and getting out in Soft/loose soil, complete all as specified and as directed.

Supply and laying of burnt clay building bricks, sub-class 'B' (old size) Designation 75 laid flat in trenches for cable protection with wide equal to length of brick,complete all as specified and as directed.

M & L for dry sand cushioning to under ground electric cable on layer of 8 cm thick before laying the cable and second layer of 15cm thick after laying the cable all as specified in clause 19.75 of MES schedule part-1 Note:- Sand shall be fine sand as specified for plastering.

Provisional Sum :- Provide a provisional sum of Rs 2,00,000.00 for misc items like half brick work (outer protective wall, dump proof treatment, rendering 15mm thick wall EPDM and upward facia) flat brick etc complete all as specified and as directed. Note :- The work under provisional sum shall be priced at SSR 2020 ( Part-II) rates adjusted by contractor's percentage derived from Quoted amount against this item. The work under Provisional sum shall be carried out to specification as ordered by GE.