PAINTING KOTTAYAM BSNL BHAVAN

Amount

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.

(a) For thickness of tiles 10 mm to 25 mm

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. complete

Providing and laying Ceramic glazed floor tiles of size 300x300 mm(thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @3.3kg/sqm including pointing the joints with white cement and matching pigments etc., complete.

Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness.

Deduct for not using 20 mm thick cement mortar 1:4 (1 cement : 4coarse sand) bedding in laying of floor tiles and jointing with grey cement slurry @ 3.3kg/sqm

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground , all complete as per directions of Engineer-In-Charge.

(a)With cement mortar 1:4 (1 cement : 4 fine sand).

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :(a) With Water thinnable cement primer.

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade : (a) One or more coats on old work.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : (a) One or more coats on old work.

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade : (a)Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface.

Providing & fixing White vitreous china water closet squatting pan (Indian type) along with "S" or "P" trap including dismantling of old WC seat and "S" or "P" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge.

Orissa pattern W.C Pan of size 580x440 mm

Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge.

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. (a)10 litre capacity - White

Dismantling of flushing cistern of all types (C.I./PVC/Vitreous China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.

Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : (a) Black solid plastic seat with lid

Repairs to water supply installations including dismantling carefully and refixing after doing the repair wark ncluding replacement of internal fittings like washers, water seals, spindle etc; all complete as per the direction of Engineer-in-charge a)PVC Flush tanks

(b) Angle valves

(c) Pillar taps

(d) Bib cocks

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. (a) Semi rigid pipe (i) 32 mm dia

Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length (a) 15 mm nominal bore

Dismantling aluminium partitions including doors carefully and stacking materials item wise in the location shown by Engineer-in-charge but within a lead of 50m

Repairs to the aluminium window shutters/frames including dismantling and refixing after doing necessary repairs to make it smooth for opeing and closing all complete as per the direction of Engineer-in-charge

A F JENSON