CONCLUSION OF RATE CONTRACT FOR REPAIRS/OVERHAULING OF HELO TRAVERSING SYSTEM ONBOARD IN SHIPS FOR TWO YEARS

Amount

FOR SERVICES:- REMOVAL OF ALL RAIL SECTION FROM DECK (SET= 02 NOS)

FOR SERVICES:- REMOVAL OF ALL DAMAGED STAINLESS STEEL STRIPS FROM THE EXISTING RAILS

FOR SERVICES :- REMOVAL OF EXISTING ADHESIVES AND CLEANING OF RAIL

FOR SERVICES:- REFURBISHMENT OF STRAIGHT RAILS

FOR SERVICES :- REFURBISHMENT OF CURVED RAILS

FOR SERVICES :- FIXING OF SS STRIP WITH THE EXISTING RAIL (STRIPS ALONG WITH FIXING SCREW) ADHESIVE ARE TO BE SUPPLIED BY FIRM. FOR THE OPERATION MAT. REQUIRED ARE SL. 07 TO 10. (SET= 02 NOS)

FOR MATERIAL :- SS STRIPS FOR STRAIGHT RAILS

FOR MATERIAL :- SS STRIPS FOR CURVED MAINT. RAIL

FOR MATERIAL :- STRIP FIXING SCREWS WITH NUTS.

FOR MATERIAL :- STRIP FIXING BONDITE (PART 1 & 2)

FOR SERVICES :- FITMENT OF MOUNTING (CABLE GUIDE MOUNTINGS BOSSES & RELATED FASTENERS ARE TO SUPPLIED BY FIRM). FOR OPERATION MAT. REQUIRE ARE SL 12 - 15) (SET= 02 NOS)

FOR MATERIAL :- SS LOCATING PIN 16 MM DIA

FOR MATERIAL :- SS LOCATING PIN 12 MM DIA

TFOR MATERIAL :- SS SCREW 16 MM X 45 MM DIA WITH WASHER

FOR MATERIAL :- SS SCREW 12 MM X 45 MM DIA WITH WASHER

FOR SERVICES :- FITMENT OF CABLE GUIDE PULLEYS (22 NOS.), RETURN PULLEYS (4 NOS) IN POSITION. (FOR THE OPERATIOPN MAT. REQUIRED ARE SL 17-19) (SET= 02 NOS)

FOR MATERIAL :- SHEAVE CABLE PULLEY

FOR MATERIAL :- RETURN PULLEYS ASSEMBLY NEAR GRID EDGE 420 DIA

FOR MATERIAL :- RETURN PULLEYS ASSEMBLY NEAR GRID EDGE 280 DIA

FOR SERVICES :- FITMENT OF RAILS, PLATFORMS, GRID EDGE WITHCORRESPONDING NYLON PACKING PLATES/ STRIPS & RESIN RAMPS ON MOUNTING BOSSES AFTER NECESSARY CLEANING OF TRACK AREA ON & THE GAP BETWEEN THE RAILS/PLATFORMS, WINCH, SHOULD BE LESS THEN 6 MM. FOR THE OPERATION MAT. REQUIRED ARE SL. 21-29) (SET= 02 NOS)

FOR MATERIAL :- SUPPORT PLATE (NYLON)

FOR MATERIAL :- FRONT SUPPORT PLATE (NYLON)

FOR MATERIAL :- REAR SUPPORT PLATE (NYLON)

FOR MATERIAL :- OUTSIDE RAIL SUPPORT PLATE (NYLON)

FOR MATERIAL :- SUPPORT PLATE RAIL (NYLON)

FOR MATERIAL :- INSIDE RAIL SUPPORT PLATE (NYLON)

FOR MATERIAL : - SUPPORT PLATE GUIDING PLATFORM (NYLON)

FOR MATERIAL :- SUPPORT PLATE GRID EDGE (NYLON)

FOR MATERIAL :- BOSSES WELDED ON DECK TO REPAIR

FOR SERVICE :- OVERAHULING & RE-FITMENT OF TENSIONER ASSEMBLY, ANGLE PULLEYS, RETURN PULLEYS, CROSS BARS, GUIDE CARRIGE & HOOKING ARM WITH REPLACEMENT OF NECESSARY SPARES. FOR THE OPERATION MAT. REQUIRED ARE SL. 31-44) (SET= 02 NOS)

FOR MATERIAL :- CLAMP DOWN RING CABLE (SET=02 NOS)

FOR MATERIAL :- FORWARD ROLLER HOLDER

FOR MATERIAL :- AFT ROLLER HOLDER

FOR MATERIAL :- TOWING ARM SPRING

FOR MATERIAL :- CASTOR WHEEL (TWIN)

FOR MATERIAL :- AFT ROLLER

FOR MATERIAL :- FWD ROLLER

FOR MATERIAL :- FLEXI HOSE FOR GUIDE CARRIAGE

FOR MATERIAL :- TOWING ARM BEARING AND GASKET HOUSING

FOR MATERIAL :- CAM FOLLOWER

FOR MATERIAL :- DAMPER SEAL

FOR MATERIAL :- BREAK SHOES

FOR MATERIAL :- HORIZONTAL AXIS ROLLER

FOR MATERIAL :- RETRACTABLE ROLLER

FOR SERVICE :- OVERAHULING & RE-FITMENT OF GEAR BOX & CAPSTAN UNIT, INCLUDING PNEUMATIC SYSTEM WITH REPLACEMENT OF NECESSARY SPARES. FOR THE OPERATION MAT. REQUIRED ARE SL. 46) (SET= 02 NOS)

FOR MATERIAL :- 1/4" FLEXI HOSE FOR CAPSTAN

FOR SERVICES :- CHANGE OF 18 DIA PULLING WIRE ROPE BY A NEW SET OF ROPE (ROPE WILL BE SUPPLIED BY FIRM LOAD TESTED BY DOCKYARD) AND NECESSARY RIGGING WITH THE SYSTEM, INCLUDING SUPPLY OF NECESSARY QUANTITY OF SPLICING METAL I.E. LED/ANTIMONY. FOR THE OPERATATIONMAT. REQUIRED ARE SL.48-49) (SET= 02 NOS)

FOR MATERIAL :- OVERHAULING OF ANGLE PULLEY WITH BASE FIXTURE

FOR MATERIAL :- PULLING WIRE ASSEMBLY PORT AND STBD

FOR SERVICES :- ALIGNMENT OF RAIL TRACKS USING A GAUGE PORT & STBD (SET= 02 NOS)

FOR SERVICES :- DRILLING & REAMING OF HOLES ON NEW WELDED BOSS IN POSITION USING MAGNETIC DRILL MACHINE FOR FITMENT OF LOCATING PINS (SET= 02 NOS)

FOR MATERIAL :- GREASING AND LUBRICATION OF ALL MOVING PARTS (GREASE)

FOR SERVICES :- GREASING AND LUBRICATION OF ALL MOVING PARTS (GREASE)

FOR MATERIAL :- SUPPLY AND CHANGE OF GEAR OIL FOR MOTORISATION GEAR BOX (GEAR OIL).

FOR SERVICE :- SUPPLY AND CHANGE OF GEAR OIL FOR MOTORISATION GEAR BOX (GEAR OIL).

FOR SERVICES :- COMMISSIONING OF THE SYSTEN (MECHANICAL, HYDRAULIC & PNEUMATIC ONLY). ON RECEIPT OF CONTROLLED ELECTRICAL SUPPLY TO MOTOR & PNEUMATIC SUPPLY TO CAPSTAN FROM SHIP STW & COMMISSIONING OF THE SYSTEN (MECHANICAL, HYSRAULIC & PNEUMATIC ONLY) (SET= 02 NOS)

FOR SERVICE :- APPLICATION OF PRIMER AND PAINT (ADMIRALTY GREY) ON THE COMPONENTS, AS APPLICABLE . (PRIMER WILL BE PROVIDED BY SS) (SET= 02 NOS)

FOR SERVICES :- LOAD TRIAL OF THE SYSTEM AS PER THE PRESCRIBED TRIAL FORMAT IN PRESENCE OF MCQ(H)/ SMFAB / SHIP STAFF. ON RECEIPT OF LOAD TRIAL CLEARANCE FROM MCQ(H), SMFAB OF ND(M)/GRSE AND MOCK-UP WITH REQUISITE LOAD BLOCK ETC. FROM DOCKYARD, LOAD TRIAL OF THE SYSTEM AS PER THE THE PRESCRIBED TRIAL FORMAT IN PRESENCE OF MQC(H)/MFAB/SHIPSTAFF (SET= 02 NOS)

ULTRA MARINE

SEA HAWK MARINE AND ALLIED SERVICES PVT LTD

H and H Precision Private Limited

YEOMAN MARINE SERVICES PVT. LTD.