Planning and Economic Affairs RKI Department Enhancement of Existing State Bio Control Laboratory at Mannuthy Thrissur District Electrification works for Microbiology lab and Parasites and Predators lab buildings Retender

Amount

Appendix - 1 – Electrification of Microbiology Lab

Wiring

1.10.3 : Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group C

od92268/2024_2025 : Wiring combined plug point together with the light point/ fan point/ exhaust fan point/ call bell point including 6 A 5 pin modular socket controlled by 6A one way modular switch in the existing switch board and giving connection to the phase, neutral and earth terminal with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable ( Green wire for earthing) etc as required.

1.7.1 : Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

90.3.19.3 : Supply conveyance, installation, testing and commissioning the light fittings of following types made from CRCA sheet 0.5mm thickness with all accessories and lamps directly on wall and giving connections with 16/0.20 mm 3 core PVC insulated and sheathed round copper conductor flex wire or extending the original wiring and giving connections as required 1200mm 1 X 20 W LED Lamp with box type fixture.

90.15.4.2 : Supply Conveyance, installation, testing and commissioning of 36/40W LED street light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing,acrylic cover complete with THD less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer)

1.34 : Supplying and fixing brass batten/ angle holder including connection etc. as required.

od92281/2024_2025 : Supply conveyance, installation, testing and commissioning the 17 W LED Mirror light fittings directly fixed on wall and giving connections with 16/0.20 mm 3 core PVC insulated and sheathed round copper conductor flex wire or extending the original wiring and giving connections as required (Philips Ultron 17-Watt Wall Light (Cool White, Round, Metal) or its equivalent make)<br> <br> <br>

od92286/2024_2025 : Supply, Conveyance, installation, testing and commissioning of surface/recess mounting down light fittings of following type directly on ceiling including giving connections with required length of 16/0.20 mm 3 core round copper conductor flex wire conforming to relevant ISS or with the extended original wiring, making good the damages, colour washing etc. as required. (Philips make 250CLED 12S-6500PSUWH round Light or equivalent)<br> <br>

od92287/2024_2025 : SITC of Bulk head fittings Pressure die cast housing IP 65 Protection against dust and water on wall including cutting necessary holes, giving connections with the extended original wiring , making good the damages ,Colour washing etc. as required. Philips make VISTA GLOW model no. WT140W LED 7S CW PSUSPC or its equivalent. <br> <br>

od92292/2024_2025 : Supply and installing B22 type 9W, LED BULB of 100 lumen/watt with PF > 0.95<br> <br>

od92361/2024_2025 : Supply,conveyance, installation , testing and commissioning of 380 mm sweep, 1400 rpm Heavy Duty Exhaust fan working on 230 V A/C in the existing opening, fixing necessary anchor bolts / bolt and nuts etc., as required including giving connections with the supplied wire along with the exhaust fan.<br> <br>

od92296/2024_2025 : supply ,conveyance installation testing and commissioning of Light Duty exhaust fan of 305mm in the opening fixing necessary bolts and nuts making good the damages etc.as required including giving connection with required length of 24/0.2mmpvc insulated and pvc sheathed 3core flex wire.<br> <br>

90.4.8 : Charges for cutting holes suitable for accommodating exhaust fans up to 305mm sweep including plastering colour washing etc. as required.

90.4.9 : Charges for cutting holes suitable for accommodating exhaust fans above 305mm sweep and up to 450mm sweep including plastering colour washing etc. as required.

90.4.2 : Supply and installation of suitable size MS belt type fan clamp fabricated from flat iron 40 x 6 mm, 150mm long x 2 Nos with M.S. rod bent to shape, neatly painted with 2 coats of enamel paint over a coat of red oxide primer as per IS 732 as required.

90.4.1 : Supply and installation of suitable size MS rod type fan clamp in the RCC slab as per IS 732 as required.

90.4.5.2 : Supply, conveyance, installation, testing and commissioning of ceiling fans of the following sizes using standard accessories excluding resistance type regulator, wiring the down rod with 16/0.20mm PVC insulated and PVC sheathed 650/1100V grade 3 core round copper conductor flex wire or with extended original wiring etc. as required.1200mm sweep -5 star rated ceiling fan complete with 300mm down rod, canopies shackles and blades working on 230 V/ 240V single phase A/C

1.25 : Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

1.27.1 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.1 or 2 Module (75mmX75mm)

1.27.2 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.3 Module (100mmX75mm)

1.27.4 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.6 Module (200mmX75mm)

1.27.5 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.8 Module (125mmX125mm)

1.28.1 : Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.1 or 2 Module

1.28.2 : Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.3 Module

1.28.4 : Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.6 Module

1.28.5 : Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.8 Module

1.24.1 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 amps switch

1.24.3 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.15/16 amp switch

1.24.4 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.3 pin 5/6 amp socket outlet

1.24.5 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.6 pin 15/16 amp socket outlet

1.26 : Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

90.10.3.15 : Supply and Fixing the following modular switches & accessories in the existing front plates and giving necessary connections as required (RoHS compliant )32A DP switch with indicator

90.10.3.32 : Supply and Fixing the following modular switches & accessories in the existing front plates and giving necessary connections as required (RoHS compliant ) 25 A 3 pin plug to, with indicator

90.10.3.33 : Supply and Fixing the following modular switches & accessories in the existing front plates and giving necessary connections as required (RoHS compliant )25 A 3 PIN shuttered socket

1.17.3 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 X 1.5 sq.mm

1.17.12 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 2.5 sq. mm

1.17.15 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.6 x 2.5 sq. mm

1.17.21 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 4 sq. mm

1.17.23 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.5 x 4 sq. mm

1.17.31 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.4 x 6 sq. mm

1.17.32 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.5 x 6 sq. mm

90.6.4.54 : Supply and drawing 650/1100 V grade FRLS PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.10.00 sq.mm 4 Run

90.6.4.55 : Supply and drawing 650/1100 V grade FRLS PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.10.00 sq.mm 5 Run

90.6.5.12 : Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.3 core 2.50 sq.mm

90.6.5.19 : Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.4 core 2.50 sq.mm

1.21.1 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm

1.21.2 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm

1.21.3 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.32 mm

90.9.2.1 : Supply and fixing 100 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recess including cutting the wall and making good the damages in case of recessed installation as required.100 x 50 mm CMS with days base and lid

90.9.2.2 : Supply and fixing 100 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recess including cutting the wall and making good the damages in case of recessed installation as required.Cable devider

90.9.2.3 : Supply and fixing 100 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recess including cutting the wall and making good the damages in case of recessed installation as required.External angle 90 degree

90.9.2.5 : Supply and fixing 100 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recess including cutting the wall and making good the damages in case of recessed installation as required. Internal angle 90 degree.

90.9.2.6 : Supply and fixing 100 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recess including cutting the wall and making good the damages in case of recessed installation as required.Internal coupler

90.9.2.8 : Supply and fixing 100 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recess including cutting the wall and making good the damages in case of recessed installation as required.End cap

90.9.1.1 : Supply and fixing 50 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recess including cutting the wall and making good the damages in case of recessed installation as required.50 X 50 mm Cable management system with base and lid

90.9.1.2 : Supply and fixing 50 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recess including cutting the wall and making good the damages in case of recessed installation as required.External angle 90 degree

90.9.1.4 : Supply and fixing 50 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recess including cutting the wall and making good the damages in case of recessed installation as required.Internal angle 90 degree .

90.9.1.5 : Supply and fixing 50 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recess including cutting the wall and making good the damages in case of recessed installation as required.Internal coupler.

90.9.1.7 : Supply and fixing 50 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recess including cutting the wall and making good the damages in case of recessed installation as required.End cap

90.9.1.10 : Supply and fixing 50 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recess including cutting the wall and making good the damages in case of recessed installation as required.Cable retainer

90.9.2.12 : Supply and fixing 100 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recess including cutting the wall and making good the damages in case of recessed installation as required.1 to 3 module mounting box

90.16.1.1 : Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required. 2.00 mm copper conductor (14 SWG)

90.16.1.3 : Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required. 3.15 mm Copper conductor (10 SWG)

90.16.5.1 : Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.2.00mm (14 SWG)

90.16.5.3 : Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.3.15 mm (10SWG)

90.12.7.2 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required. 2 Core 6 sq.mm with factory made clamp.

90.12.7.41 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 16 sq.mm with factory made clamp

90.12.7.29 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required. 3.5 core 50sq.mm with factory made clamp

90.12.7.34 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required. 3.5 core 185 sq.mm

9.1.1 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.2 X 6 sq. mm (19mm)

9.1.33 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 16 sq. mm (28mm)

9.1.22 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2 X 50 sq. mm (35mm)

9.1.27 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 185 sq. mm (57mm)

2.3.3 : Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator12 way, Double door

90.11.1.10 : Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required 4 way (8+12) - three phase double cover (IP 42/43)

90.11.1.11 : Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required 6 way (8+18) - three phase double cover (IP 42/43)

90.11.1.18 : Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required 4 way (8+12) - double cover TPN vertical DB with provision for fixing MCCB as incomer and SP/TP MCB as outgoing (IP 42/43)

90.11.1.21 : Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required.12 way (8+36) - double cover TPN vertical DB with provision for fixing MCCB as incomer and SP/TP MCB as outgoing (IP 42/43)

2.10.1 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole

2.10.4 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Triple pole

od103921/2024_2025 : Supplying and fixing 40 amps to 63 amps rating, 240/415 volts, &quot;C&quot; curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Triple pole

2.11 : Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.

2.12.1 : Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

2.13.2 : Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps

2.14.1 : Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.25 amps

2.15.2 : Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

2.21 : Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.

90.14.1.2 : Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623.<br> Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc. Supply and fabrication of MV panel board using 1.6 mm CRCA sheet , powder coated ( Excluding base frame)

90.14.2.1 : Supply and providing 2mm SMC sheet as shrouding for bus interconnection / terminations etc. including required nut & bolt etc.

90.14.3.1 : Supply and providing heavy duty 'A' section neoprene gasket in the panel board A ' section neoprene beeding suitable for 1.60/ 2.00 mm sheet

90.14.4 : Supply and fabrication conveyance and installation of base frame of panel board using 75 x 40 mm rolled steel channel (ISMC)

90.14.5 : Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board

90.14.6 : Supply and providing copper bus bars including finger type SMC bus bar supports in the bus chamber, suitable size nut & bolt, providng heat shrink sleeves etc. as required.

90.14.7 : Supply and providing copper earth bus in the panel board

od105616/2024_2025 : Supply and providing MS Chequered plates of suitable thickness including cutting, welding, painting etc. as required.

5.6 : Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

5.4 : Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

90.16.3.2 : Supply and clamping the following size of strips on surface of wall/ parapet/ existing cable tray using clamps fabricated from 20 X 3 mm GI flat duly painted or heavy duty GI spacer saddles spacing of clamps not exceeding 1 m, making good the damages, colour washing etc. as required ( for horizontal run) 25X 3mm GI strip

90.16.4.2 : Supply and clamping the following sizes of strips on surface of wall / parapet/ existing cable tray using clamps fabricated from 20 x3 mm GI flat duly painted or heavy duty GI spacer saddles, spacing of clamps not exceeding 1 m , making good the damages, colour washing etc. as required ( for vertical run).25X 3mm GI strip

90.16.3.9 : Supply and clamping the following size of strips on surface of wall/ parapet/ existing cable tray using clamps fabricated from 20 X 3 mm GI flat duly painted or heavy duty GI spacer saddles spacing of clamps not exceeding 1 m, making good the damages, colour washing etc. as required ( for horizontal run) 5X 3mm Copper strip

90.16.4.8 : Supply and clamping the following sizes of strips on surface of wall / parapet/ existing cable tray using clamps fabricated from 20 x3 mm GI flat duly painted or heavy duty GI spacer saddles, spacing of clamps not exceeding 1 m , making good the damages, colour washing etc. as required ( for vertical run).25 X 3 mm copper strip

6.14 : Providing and laying G.l. tape 32 mm X 6 mm from earth. electrode directly in ground as required.

5.8 : Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm)

od105610/2024_2025 : Providing and fixing testing joint, made of 25 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required.

od101941/2024_2025 : Supply Providing and fixing of lightning No conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes and giving connections etc. complete as required.<br> <br>

90.14.24.68 : Supply & fixing the following Power Capacitors 3 phase delta connected in positon and giving connection. 5 KVAr, 3 phase , 520 V, Metalised polypylene Heavy duty , box type resin filled capacitor suitable for APFC panel with block reactor

90.14.24.71 : Supply & fixing the following Power Capacitors 3 phase delta connected in positon and giving connection. 10 KVAR, 3 phase, 520 V, Metallised Poly Propylene Heavy duty, Box type resin filled Capacitor suitable for APFC panel with block reactor.

90.14.24.73 : Supply & fixing the following Power Capacitors 3 phase delta connected in positon and giving connection.15 KVAR, 3 phase, 520 V, Metallised Poly Propylene Heavy duty, Box type resin filled Capacitor suitable for APFC panel with block reactor.

od101064/2024_2025 : Supply &fixing the following Power Capacitors 3 phase delta connected in position and giving connection. 20 KVAr, 3 phase, 440 V, Metalised Poly Propylene Heavy duty Cylindrical Gas filled Capacitor suitable for APFC panel without block reactor.

od101068/2024_2025 : Supply and fixing 3 pole, capacitor duty contactor with AC coil for switching capacitor banks of rating 16 - 25 KVAR &amp; with 1 NO auxiliary contact in the existing panel assembly as required.

od101071/2024_2025 : Supply and providing Panel mounting fresh Air Fan 150 mm as required

od92316/2024_2025 : Supply and providing 3 Pole Capacitor duty contactors for switching capacitor banks 15 kVAR with AC Coil, in the existing panel board and giving connection.<br> <br>

od92317/2024_2025 : Supply and providing 3 Pole Capacitor duty contactors for switching capacitor banks 10 kVAR with AC Coil, in the existing panel board and giving connection.<br> <br>

od92318/2024_2025 : Supply and providing 3 Pole Capacitor duty contactors for switching capacitor banks 5 kVAR with AC Coil, in the existing panel board and giving connection.<br> <br>

od92319/2024_2025 : Supply and Fixing of Illuminated Flush head Actuator - Green with legend &apos;ON&apos;, (Contact - 1 NO) and giving connection as required<br> <br> 2

od104485/2024_2025 : Supply and providing 8 stage 440/110V 5/1A Intelligent power factor controller in the existing panel board and giving connection.<br> <br>

90.14.10.3 : Supply, conveyance and fixing the following types & current rated control gears & switchgears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required.16A-100A (Ics=100%Icu) 4 pole, current limiting type MCCB having thermal magnetic release with overload setting of 80 - 100% with thermal magnetic release having adjustable OL

90.14.10.12 : Supply, conveyance and fixing the following types & current rated control gears & switchgears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required.160A, 35/36kA (Ics=100%Icu) 4 pole current limiting type MCCB with microprocessor-based release with overload setting of 50-100% having adjustable OL & SC.

od92326/2024_2025 : Supply and Fixing of Spreader Terminals for 4 pole MCCB in the existing panel board and giving connections etc. as required.16A to 100A

od92327/2024_2025 : Supply and Fixing of Spreader Terminals for 4 pole MCCB in the existing panel board and giving connections etc. as required. 160A

90.14.11.13 : MCCB Accessories Supply and fixing rotary handle, External type (including BUC handle with door interlock ) in the existing MCCB of rating up to 250 A

90.14.11.15 : MCCB Accessories Supply and fixing rotary handle, External type (including BUC handle with door interlock ) in the existing MCCB of rating up to 315-630 A

od92329/2024_2025 : Supply and providing Blue Colour LED indicator lamp, AC/DC, 22.5 cm cut out dia. <br> <br> 3

od92330/2024_2025 : Supply and providing Red, Green, Black, Yellow, Orange colors LED indicators, AC/DC 22.5mm cut out dia <br> <br>

od92331/2024_2025 : Providing and fixing following multi function meter to read: V, A, F, 3 phase accuracy class 1 in existing panel and giving connection complete <br> <br>

od92332/2024_2025 : Supply and Fixing of Bakelite Fuse Base 16A with HRC Fuse Link 2A and giving connection as required

od92333/2024_2025 : Carrying out control wiring for panel with normal meters and indication lamps alone with 650/1100 V grade PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 for interconnecting the control devices/ equipment&apos;s including providing suitable size insulated sockets at the termination points or soldered properly, providing numbering ferrules for the proper identification of the wiring, keeping the wiring firm by suitable tie/ tie mounts/ PVC duct etc as required.- 1.5 sq mm single run with required sockets. <br> <br>

2.1.2 : Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.63 Amp TP & N

2.1.3 : Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.100 Amp TP&N

2.1.5 : Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.160 Amp TP&N

2.1.6 : Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.200 Amp TP&N

2.1.7 : Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.320 Amp TP&N

2.1.8 : Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.400 Amp TP&N

od105618/2024_2025 : Supply and providing the following sizes of bolt and nut with washers on the existing MS box / earth bus etc. as required including drilling necessary holes as required.25 x 6 mm brass bolt & nut

od105619/2024_2025 : Supply and providing the following sizes of bolt and nut with washers on the existing MS box / earth bus etc. as required including drilling necessary holes as required.25 x 3mm brass bolt & nut

od92334/2024_2025 : Supply conveyance installation of portable type ABC TYPE 4.5 KG Capacity fire extinguisher in position <br>

od92335/2024_2025 : Supply conveyance installation of portable type CO2 TYPE 4.5 KG Capacity fire extinguisher in position <br>

od92336/2024_2025 : Supply and providing 9 Liter capacity GI Fire Bucket painted in post office red with primer coat of red oxide and written with white paint 'FIRE' mounted on MS angle frame work/ wall bracket filled with fine sand, painting the bracket/ floor stand including making good the damages, colour washing etc. as required.<br>

od100440/2024_2025 : Supply and providing 2.5mm thick Elastomeric fire retardant insulating mat as per IS 15652/2006 to withstand 11 KV dielectric strength.

od100441/2024_2025 : Supply and providing First Aid Chart duly framed and placed in a conspicuous location for clear vision.

od100442/2024_2025 : Painting letters or figures with enamel paint as identification mark to SB, DB, panel board etc as required

od92262/2024_2025 : Amount remitted to Electrical Inspectorate/KSEB for Scheme approval and HT connection charge. The actual amount remitted to KSEB/Electrical Inspectorate may be reimbursed on submission of Original Receipts <br> <br>

od92263/2024_2025 : Preparation of the Drawing and Schematic diagram and obtain the Application form from the Electrical Inspectorate /KSEB the actual amount may be returned on produce of original Receipts.

od92266/2024_2025 : Charges for preparation of Electrical Schematic per A3 sheet first copy <br>

od92271/2024_2025 : Copying charges for additional copies per A3 sheet<br>

SITC OF LIFT

od92393/2024_2025 : Annual comprehensive maintenance passenger, 1 MPS, G+2, single automatic push button with/without attendant lifts which include routine preventive and break down maintenance for a period of five years i/c repair, replacement of worn out items with minimum down time warranty &amp; guarantee of repaired/ replaced items i/c lamps, battery of ARD lighting system etc. after completion of one year of guarantee period. (Rate quoted shall be per month per lift)&lt;br&gt;Cost of AMC for 5 years after completion of 1 year free maintenance&lt;br&gt;AMC Charges for 2nd year considering an increase of 5% over 1st year due to inflation&lt;br&gt;

od92394/2024_2025 : Annual comprehensive maintenance passenger, 1 MPS, G+2, single automatic push button with/without attendant lifts which include routine preventive and break down maintenance for a period of five years i/c repair, replacement of worn out items with minimum down time warranty &amp; guarantee of repaired/ replaced items i/c lamps, battery of ARD lighting system etc. after completion of one year of guarantee period. (Rate quoted shall be per month per lift)Cost of AMC for 5 years after completion of 1 year free maintenance AMC Charges for 3rd year considering an increase of 5% over 2nd year due to inflation

od92395/2024_2025 : Annual comprehensive maintenance passenger, 1 MPS, G+2, single automatic push button with/without attendant lifts which include routine preventive and break down maintenance for a period of five years i/c repair, replacement of worn out items with minimum down time warranty & guarantee of repaired/ replaced items i/c lamps, battery of ARD lighting system etc. after completion of one year of guarantee period. (Rate quoted shall be per month per lift)Cost of AMC for 5 years after completion of 1 year free maintenance&lt;br&gt;AMC Charges for 4th year considering an increase of 5% over 3rd year due to inflation

od92396/2024_2025 : Annual comprehensive maintenance passenger, 1 MPS, G+2, single automatic push button with/without attendant lifts which include routine preventive and break down maintenance for a period of five years i/c repair, replacement of worn out items with minimum down time warranty &amp; guarantee of repaired/ replaced items i/c lamps, battery of ARD lighting system etc. after completion of one year of guarantee period. (Rate quoted shall be per month per lift)&lt;br&gt;Cost of AMC for 5 years after completion of 1 year free maintenance&lt;br&gt;AMC Charges for 5th year considering an increase of 5% over 4th year due to inflation

SITC of A/C units

od100428/2024_2025 : Supply, installation, testing and commissioning of wall mounting type split air conditioner unit of tonnage 1.5 TR or cooling capacity 5000W, with minimum ISEER of 5.0 ( 5 star), single phase split type AC unit conforming to IS fitted with rotary compressor operating on 230V single phase AC supply, R410A /non CFC refrigerant capable of performing functions like cooling, dehumidifying, air circulating, filtering etc of following capacity, microprocessor control with cordless remote control etc with comprehensive maintenance contract up to the end of 36 months from date of commissioning including periodical services, gas topping etc. complete.(Carrier/Blue star/Daikin/LG/Mitsubhishi or equivalent) (Including stand)

od100429/2024_2025 : Supply, installation, testing and commissioning of wall mounting type split air conditioner unit of tonnage 2.0 TR or cooling capacity 6000W, with minimum ISEER of 5.0 ( 5 star), single phase split type AC unit conforming to IS fitted with rotary compressor operating on 230V single phase AC supply, R410A /non CFC refrigerant capable of performing functions like cooling, dehumidifying, air circulating, filtering etc of following capacity, microprocessor control with cordless remote control etc with comprehensive maintenance contract up to the end of 36 months from date of commissioning including periodical services, gas topping etc. complete.(Carrier/Blue star/Daikin/LG/Mitsubhishi or equivalent) (including stand)

od100431/2024_2025 : Supply and fixing of 25mm (10kg/sq.cm) PVC drain pipe along with all required accessories in surface/ recess including cutting the wall and making good the damages etc. as required.

od100432/2024_2025 : Supply and providing the following size soft drawn copper pipe for extending the pipe between out door and indoor unit, including insulating the pipe using rubberised foam sleeve 10mm thick, brazing, leak testing etc.:- 1/4 inch (6.35 mm) and 1/2 inch (12.7mm) 22 gauge

od100433/2024_2025 : Supply and installation of automatic stabiliser suitable for 1.5 TR/2.0 TR AC unit with working voltage range of 170 V - 270 V AC, current capacity of 12A, indicators, suitable for wall mounting etc. as required. (V-Guard VG 4170 or equivalent)

od101961/2024_2025 : Supply conveyance and installation of 1m size AIR CURTAIN of high velocity 1400 rpm single phase .Air through in 2m.

Providing Fire Fighting System in the Micro biology Lab

od92274/2024_2025 : BOOSTER PUMP :-&lt;br&gt;Supply, Installation, Testing and Commissioning of Booster Pump with AC driven TEFC motor, mono block, rated for 450 LPM at 35 M head 3 phase 7.5 HP complete with all accessories in position and giving connections etc as required. (Make : LUBI)

90.14.28.2 : S & F Motor starters of the following ratings

od92279/2024_2025 : PRESSURE GAUGE:&bull;&lt;br&gt;Supply, Installation,Testing and Commissioning of Pressure Gauge in position etc as required. 100 mm dia

od92280/2024_2025 : Providing &amp; fixing of pressure switch in M.S. pipe line including connection etc. as required

od92285/2024_2025 : Providing, laying, testing &amp; commissioning of &apos;B&apos; class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 100 mm dia

od92288/2024_2025 : HOSE REEL (IMPORTED ISI MARKED):-Supply, Installation Testing &amp; Commissioning of swing type hose reel confirming to IS : 884/1985 drum made of MS sheet to keep 19 MM dia 30 M long rubber hose pipe with PVC nozzle on one end and all other necessary fixing materials in position etc as required.

od92291/2024_2025 : Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required. 100 mm dia

od92293/2024_2025 : BALL VALVE :Supply, Installation, Testing and Commissioning of Bail valve in position etc as required. 20mm dia.

od92297/2024_2025 : NON RETURN VALVE:- Supply Installation, Testing and Commissioning of Non-return valve of following sizes without bye pass arrangements swing check type with Cast iron body and flanges drilled to IS : 1538. in position etc as required. 100MM dia.

od92299/2024_2025 : AIRRELEASE VALVE:-&lt;br&gt;Supply Installation Testing and Commissioning of Air release valve 15 mm gun metal in position etc as required.

od92301/2024_2025 : FIRE BRIGADE INLET 2 WAY: Supply Installation, Testing and Commissioning of fire brigade connection comprising of 2 Stainless steel inlets in position etc as required.

od92304/2024_2025 : FIRE EXTINGUISHER:- Supply and Installation of ABC Stored Pressure Type Fire Extinguisher of 4 Kgs capacity complete with initial charges and installation brackets in position etc as required.

od92305/2024_2025 : MODULAR FIRE EXTINGUISHER:- Supply and Installation of ABC Modular Type Fire Extinguisher of 5 Kgs capacity complete with initial charges and installation brackets in position as required.

od92306/2024_2025 :FIRE DETECTION AND ALARM SYSTEM (CONVENTIONAL)&lt;br&gt;Supplying, installation, testing &amp; commissioning of manual call boxes of MS Construction in surface/recess with stainless steel chain &amp; hammer assembly Complete with glass and push button etc. as required.

od92308/2024_2025 : FIRE DETECTION AND ALARM SYSTEM (CONVENTIONAL) Supplying, installation, testing &amp; commissioning fire alarm sounder (HOOTER) with facility to make announcement, mounted in M.S. box (16 SWG) with hinged cover plate &amp; suitable for operation with amplifier i/c line matching transformer etc. complete as required.

od92309/2024_2025 : FIRE ALARM PANEL&lt;br&gt;Supply,Installation of Microprocessor based main control panel of 4 Zone, including battery charging system, with all attachment for the alarm system with auto alert facilities and made MS sheet floor/wall mounting with locking arrangements duly painted as per the fire standard requirement.

od92310/2024_2025 : Supply and providing Glow Sign boards of 3mm PVC foam board size not less than 12&quot; x 4&quot; as required.

od92311/2024_2025 : Supplying and installing in position LED &quot;EXIT&quot; sign boards with battery backup. (size 30cm x 15cm)

1.17.2 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.2 x 1.5 sq. mm

1.21.1 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm

od92312/2024_2025 : INVERTER Supply, Conveyance and installation of INVERTER 900 VA with 88 AH Exide Battery including testing and commissioning etc as required.( For emergency lighting is independently connected and operated one switch.)

od92313/2024_2025 : Supply, Conveyance, installation, testing and commissioning of 3W Super Bright LED light fittings of following type Including giving connections with required length of 16/0.20 mm 3 core round copper conductor flex wire conforming to relevant ISS or with the extended original wiring, making good the damages, colour washing etc. as required. (Philips/Wipro/Cromption or equivalent)

od92264/2024_2025 : Supply and installation of 30KVA /30KW 3 phase in and out with 12V 100AH 36 Nos. battery with 1hr back up with stand in stand alone configuration with indoor IP 20 SURGE Protection system PF .99 THD 5% WITH OUT Use of any external filters double conversion technologywith input voltage380/400/415 <br>50Hz3phase ,It shallbe 100% generator compatible with efficiency96.5% and including all accessories etc.as required.relevant IS standards conversion DSP based UPS system and UPS shall be with automatic bypass built in.The system shall have IGBT RECTIFIR and invertor

Description of Work / Item(s)

Amount

Appendix - 2 - Electrification of Parasites & Predators lab

Electrification

1.10.3 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface /recessed medium class PVC conduit,with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group C

OD19244/2024-2025 Wiring combined plug point together with the light point/ fan point/ exhaust fan point/ call bell point including 6 A 5 pin modular socket controlled by 6A one way modular switch in the existing switch board and giving connection to the phase,neutral and earth terminal with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable ( Green wire for earthing) etc as required.

90.3.19.3 Supply conveyance, installation, testing and commissioning the light fittings of following types made from CRCA sheet 0.5mm thickness with all accessories and lamps directly on wall and giving connections with 16/0.20 mm 3 core PVC insulated and sheathed round copper conductor flex wire or extending the original wiring and giving connections as required1200 mm 1X20W LED Lamp with box type fixture

1.34 Supplying and fixing brass batten/ angle holder including connection etc. as required.

OD19245/2024-2025 Supply and installing B22 type 9W, LED BULB of 100 lumen/watt with PF&amp;0.95

OD21241/2024-2025Supply and Installation of 30W U.V Lamp Fittings Philips make TUV 30W ISL/25 latest TUV T8 36W SLV6C Suspended mounting height up to 3 meter with working temperature 10 degree to 45 degree sensor location enabled in the batten body with micro wave sensor with detection range 5 meter @ 3 meter of height working voltage 160-270V THD &lt; 10% with drive in position and giving connections etc. as required.

OD21242/2024-2025 Supply Conveyance and Installation of Hanging light fittings LUKER make FLO white P1 E27 holder 10 mm dia 370 mm height in position and giving connections etc. as required.

90.15.4.2 Supply Conveyance, installation, testing and commissioning of 36/40W LED street light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing,acrylic cover complete with THD less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&amp;80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer)

90.4.1Supply and installation of suitable size MS rod type fan clamp in the RCC slab as per IS 732 as required.

90.4.5.4 Supply, Installation, testing and commissioning of ceiling fan of following sizes including wiring the down rods of standard length (up to 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required. 1200mm sweep - ceiling fan complete with service value minimum 4.0(cub meter/minute/Watt), Air delivery minimum 210(cubic meter/minute), Copper winding suitable for 230V/240V single phase AC supply

90.4.8 Charges for cutting holes suitable for accommodating exhaust fans up to 305mm sweep including plastering colour washing etc. as required.

90.4.9 Charges for cutting holes suitable for accommodating exhaust fans above 305mm sweep and up to 450mm sweep including plastering colour washing etc. as required.

OD19246/2024-2025 Supply, Conveyance, installation, testing and commissioning of 300/305 mm sweep Light Duty Exhaust fan in metal frame working on 230 V A/C and giving connections etc. as required

OD19247/2024-2025 Supply, Conveyance, installation, testing and commissioning of 380 mm sweep, 900 rpm Heavy Duty Exhaust in metal frame working on 230 V A/C and giving connections etc. as required

OD19248/2024-2025 Supply conveyance, installation, testing and commissioning the 17 W LED Mirror light fittings directly fixed on wall and giving connections with 16/0.20 mm 3 core PVC insulated and sheathed round copper conductor flex wire or extending the original wiring and giving connections as required (Philips Ultron 17-Watt Wall Light (Cool White, Round, Metal) or its equivalent make)

OD19249/2024-2025 SITC of Bulk head fittings Pressure die cast housing IP 65 Protection against dust and water on wall including cutting necessary holes, giving connections with the extended original wiring , making good the damages ,Colour washing etc. as required. Philips make VISTA GLOW model no. WT140W LED 7S CW PSUSPC or its equivalent.

1.21.1 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm

1.21.2 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm

1.21.3 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.32 mm

90.9.2.1 Supply and fixing 100 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 &amp; 4678 on surface / recess including cutting the wall and making good the damages in case of recessed installation as required.100 x 50 mm CMS with base and lid

90.9.2.2 Supply and fixing 100 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 &amp; 4678 on surface / recess including cutting the wall and making good the damages in case of recessed installation as required.Cable devider

90.9.2.3 Supply and fixing 100 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 &amp; 4678 on surface / recess including cutting the wall and making good the damages in case of recessed installation as required.External angle 90 degree

90.9.2.5 Supply and fixing 100 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 &amp; 4678 on surface / recess including cutting the wall and making good the damages in case of recessed installation as required.Internal angle 90 degree

90.9.2.6 Supply and fixing 100 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 &amp; 4678 on surface / recess including cutting the wall and making good the damages in case of recessed installation as required.Internal coupler

90.9.2.8 Supply and fixing 100 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 &amp; 4678 on surface / recess including cutting the wall and making good the damages in case of recessed installation as required.End cap

90.9.2.10 Supply and fixing 100 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 &amp; 4678 on surface / recess including cutting the wall and making good the damages in case of recessed installation as required.Joint cover

1.17.3 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 X 1.5 sq.mm

1.17.6 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.6 x1.5 sq. mm

1.17.12 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 2.5 sq. mm

1.17.15 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.6 x 2.5 sq. mm

1.17.21 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x4 sq. mm

1.17.31 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.4 x6 sq.mm

1.17.33 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.6 x 6 sq. mm

90.6.4.55 Supply and drawing 650/1100 V grade FRLS PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.10.00 sq.mm 5 Run

90.6.5.11 Supply and drawing the following sizes of multi-core PVC insulated &amp; FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.3 core 1.50 sq mm

1.27.1Supplying and fixing following size/ modules, GI box alongwith modular base &amp;cover plate for modular switches in recess etc as required.1 or 2 Module (75mmX75mm)

1.27.2 Supplying and fixing following size/ modules, GI box alongwith modular base &amp; cover plate for modular switches in recess etc as required.3 Module (100mmX75mm)

1.27.4 Supplying and fixing following size/ modules, GI box alongwith modular base &amp; cover plate for modular switches in recess etc as required.6 Module (200mmX75mm)

1.28.1 Supplying and fixing following Modular base &amp; cover plate on existing modular metal boxes etc. as required.1 or 2 Module

1.28.2 Supplying and fixing following Modular base &amp; cover plate on existing modular metal boxes etc. as required.3 Module

1.28.4 Supplying and fixing following Modular base &amp; cover plate on existing modular metal boxes etc. as required.6 Module

1.24.1 Supplying and fixing following modular switch/ socket on the existing modular plate &amp; switch box including connections but excluding modular plate etc. as required.5/6 amps switch

1.24.3 Supplying and fixing following modular switch/ socket on the existing modular plate &amp; switch box including connections but excluding modular plate etc. as required.15/16 amp switch

1.24.4 Supplying and fixing following modular switch/ socket on the existing modular plate &amp; switch box including connections but excluding modular plate etc. as required.3 pin 5/6 amp socket outlet

1.24.5 Supplying and fixing following modular switch/ socket on the existing modular plate &amp; switch box including connections but excluding modular plate etc. as required.6 pin 15/16 amp socket outlet

90.10.3.15 Supply and Fixing the following modular switches &amp; accessories in the existing front plates and giving necessary connections as required (RoHS compliant )32A DP switch with indicator

90.10.3.32 Supply and Fixing the following modular switches &amp; accessories in the existing front plates and giving necessary connections as required (RoHS compliant )25A 3 pin plug top with indicator

90.10.3.33 Supply and Fixing the following modular switches &amp; accessories in the existing front plates and giving necessary connections as required (RoHS compliant )25A 3pin Shuttered socket

2.3.4 Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator16 way, Double door

90.11.1.11 Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required6 way (8+18) - three phase double cover (IP 42/43)

90.11.1.14 Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required4 way (8+12) - double cover TPN vertical DB with provision for fixing 4P MCB / Isolator/ RCCB/ RCBO as incomer and SP/ TP MCB as outgoing (IP 42/43)

90.11.1.21Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth busand DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required12 way (8+12) - double cover TPN vertical DB with provision for fixing MCCB as incomer and SP/ TP MCB as outgoing (IP 42/43)

90.14.10.4 Supply, conveyance and fixing the following types &amp; current rated control gears &amp; switchgears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required.16 A-100A, 25/35 kA (Ics=100%Icu), 4 pole, current limiting type MCCB having thermal setting range of 80 - 100% with thermal magnetic release having adjustable OL

OD19546/2024-2025Supplying and fixing 63 amps rating, 240/415 volts, &quot;C&quot; curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63A Triple pole

2.13.2 Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps

2.12.1 Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

2.15.2 Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

2.14.1 Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.25 amps

2.10.1 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, &quot;C&quot; curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole

90.14.1.2 Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices &amp; complying to IS 8623.&lt;br&gt; Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays,indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions,folding, shrouding etc.Supply and fabrication of MV panel board using 1.6mm CRCA sheet, powder coated (excluding base frame)

90.14.2.1 Supply and providing 2mm SMC sheet as shrouding for bus interconnection / terminations etc. including required nut &amp; bolt etc.

90.14.3.1 Supply and providing heavy duty &#39;A&#39; section neoprene gasket in the panel boardA&#39; section neoprene beeding suitable for 1.60/ 2.00 mm sheet

90.14.4 Supply and fabrication conveyance and installation of base frame of panel board using 75 x 40 mm rolled steel channel (ISMC)

90.14.6 Supply and providing copper bus bars including finger type SMC bus bar supports in the bus chamber, suitable size nut &amp; bolt, providng heat shrink sleeves etc. as required.

90.14.7 Supply and providing copper earth bus in the panel board

OD20625/2024-2025 Carrying out control wiring for panel with normal meters and indication lamps alone with 650/1100 V grade PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 for interconnecting the control devices/ equipment&#39;s including providing suitable size insulated sockets at the termination points or soldered properly, providing numbering ferrules for the proper identification of the wiring, keeping the wiring firm by suitable tie/ tie mounts/ PVC duct etc as required.- 1.5 sq mm single run with required sockets

2.1.8Providing and fixing following capacity TP&amp;N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.400 Amp TP&amp;N

2.1.6 Providing and fixing following capacity TP&amp;N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.200 Amp TP&amp;N

2.1.5Providing and fixing following capacity TP&amp;N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.160 Amp TP&amp;N

2.1.3Providing and fixing following capacity TP&amp;N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.100 Amp TP&amp;N

2.1.2Providing and fixing following capacity TP&amp;N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.63 Amp TP &amp; N

90.14.24.74Supply &amp; fixing the following Power Capacitors 3 phase delta connected in positon and giving connection.20 KVAr, 3 phase, 520 V, Metalised Poly Propylene Heavy duty, Box type resin filled Capacitor suitable for APFC panel with block reactor.

90.14.24.73Supply &amp; fixing the following Power Capacitors 3 phase delta connected in positon and giving connection.15 KVAr, 3 phase, 520 V, Metalised Poly Propylene Heavy duty, Box type resin filled Capacitor suitable for APFC panel with block reactor.

90.14.24.71Supply &amp; fixing the following Power Capacitors 3 phase delta connected in positon and giving connection.10KVAr, 3 phase, 520 V, Metalised Poly Propylene Heavy duty, Box type resin filled Capacitor suitable for APFC panel with block reactor.

90.14.24.68 Supply &amp; fixing the following Power Capacitors 3 phase delta connected in positon and giving connection.5 KVAr, 3 phase, 520 V, Metalised Poly Propylene Heavy duty, Box type resin filled Capacitor suitable for APFC panel with block reactor.

OD20864/2024-2025 Supply and fixing 3 pole, capacitor duty contactor with AC coil for switching capacitor banks of rating 16 - 25 KVAR &amp; with 1 NO auxiliary contact in the existing panel assembly as required.

OD20865/2024-2025 Supply and fixing 3 pole, capacitor duty contactor with AC coil for switching capacitor banks of rating 11 - 15 KVAR &amp; with 1 NO auxiliary contact in the existing panel assembly as required.

OD20866/2024-2025 Supply and fixing 3 pole, capacitor duty contactor with AC coil for switching capacitor banks of rating 7.5 - 10 KVAR &amp; with 1 NO auxiliary contact in the existing panel assembly as required.

OD20867/2024-2025 Supply and fixing 3 pole, capacitor duty contactor with AC coil for switching capacitor banks of rating 4 - 7 KVAR &amp; with 1 NO auxiliary contact in the existing panel assembly as required.

OD20868/2024-2025Supply and providing 8 stage 440/110V 5/1A Intelligent power factor controller in the existing panel board and giving connection

OD20872/2024-2025Supply and Fixing of Illuminated Flush head Actuator - Green with legend &#39;ON&#39;, (Contact - 1 NO) and giving connection as required.

OD20869/2024-2025 Supply and providing Panel mounting fresh Air Fan 150 mm as required

OD20870/2024-2025 Flush head Push Button with 1 NC Block

OD20871/2024-2025 Flush head Push Button with 1 NO Block.

90.12.7.41Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 16 sq mm with factory made clamp

90.12.7.42Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 25 sq mm with factory made clamp

90.12.7.29Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 50 sq mm with factory made clamp

90.12.7.34Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 185 sq mm

9.1.33 Supplying and making end termination with brass compression gland and aluminiumlugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 16 sq. mm (28mm)

9.1.34 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 25 sq. mm (28mm)

9.1.22 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2 X 50 sq. mm (35mm)

9.1.27Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 185 sq. mm (57mm)

OD20654/2024-2025Supplying and providing earth clamps for siemens/ tropodur type cable glands of suitable length and other dimensions noted along with each size of glands for the following sizes of cables as required. 1.5 sq mm - 16 sq mm with 12 mm wide x 1 mm thick clip

OD20649/2024-2025Supplying and providing earth clamps for siemens/ tropodur type cable glands of suitable length and other dimensions noted along with each size of glands for the following sizes of cables as required. 4 x 25 sqmm with 20 mm wide x 1.20 mm thick clip

OD20656/2024-2025Supplying and providing earth clamps for siemens/ tropodur type cable glands of suitable length and other dimensions noted along with each size of glands for the following sizes of cables as required. 3.5 x 50 sqmm with 20 mm wide x 1.20 mm thick clip

OD20874/2024-2025Supplying and providing earth clamps for siemens/ tropodur type cable glands of suitable length and other dimensions noted along with each size of glands for the following sizes of cables as required. 3.5 x 185 sqmm with 25 mm wide x 1.20 mm thick clip

90.16.1.3Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.15 mm copper conductor ( 10 SWG)

90.16.1.2Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required2.65 mm copper conductor (12 SWG)

90.16.5.3Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.3.15 mm (10 SWG)

90.16.5.2Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.2.65 mm (12 SWG)

OD20626/2024-2025Supply and providing the following sizes of bolt and nut with washers on the existing MS box / earth bus etc. as required including drilling necessary holes as required.25 x 6 mm brass bolt &amp; nut

OD20627/2024-2025Supply and providing the following sizes of bolt and nut with washers on the existing MS box / earth bus etc. as required including drilling necessary holes as required.25 x 3mm brass bolt &amp; nut

5.4Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

OD20617/2024-2025Supply Providing and fixing of lightning No conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes and giving connections etc. complete as required.

90.16.3.2Supply and clamping the following size of strips on surface of wall/ parapet/ existing cable tray using clamps fabricated from 20 X 3 mm GI flat duly painted or heavy duty GI spacer saddles spacing of clamps not exceeding 1 m, making good the damages, colour washing etc. as required ( for horizontal run)25 x 3 mm GI strip

90.16.4.2Supply and clamping the following sizes of strips on surface of wall / parapet/ existing cable tray using clamps fabricated from 20 x3 mm GI flat duly painted or heavy duty GI spacer saddles, spacing of clamps not exceeding 1 m , making good the damages, colour washing etc. as required ( for vertical run).25 x 3 mm GI strip

6.14Providing and laying G.l. tape 32 mm X 6 mm from earth. electrode directly in ground as required.

OD20616/2024-2025Providing and fixing testing joint, made of 25 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required.

90.16.3.9Supply and clamping the following size of strips on surface of wall/ parapet/ existing cable tray using clamps fabricated from 20 X 3 mm GI flat duly painted or heavy duty GI spacer saddles spacing of clamps not exceeding 1 m, making good the damages, colour washing etc. as required ( for horizontal run)25 x 3 mm copper strip

90.16.4.8 Supply and clamping the following sizes of strips on surface of wall / parapet/ existing cable tray using clamps fabricated from 20 x3 mm GI flat duly painted or heavy duty GI spacer saddles, spacing of clamps not exceeding 1 m , making good the damages, colour washing etc. as required ( for vertical run).25 x 3 mm copper strip

OD20618/2024-2025Supplying and laying 25 mm X 3 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt &amp; spring washer spaced at 50mm)

90.14.5Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board

OD20619/2024-2025Supply and providing MS Chequered plates of suitable thickness including cutting, welding, painting etc. as required.

OD20621/2024-2025Supply and providing Red, Green, Black, Yellow, Orange colours LED indicators, AC/DC 22.5mm cut out dia

OD20622/2024-2025 Supply and providing Blue Colour LED indicator lamp, AC/DC, 22.5 cm cut out dia

OD20623/2024-2025 Providing and fixing following multi function meter to read: V, A, F, 3 phase accuracy class 1 in existing panel and giving connection complete

OD20624/2024-2025 Supply and fixing 20 A bake lite type HRC fuse base with link in existing metal box and giving connections etc.as required.

OD20647/2024-2025 Supply and installation of Enameled Danger Notice Board of size 200 x 150 mm.with inscriptions ( both in English and Malayalam) and conventional Skull and Bone in Red colour.

OD20628/2024-2025 Supply and providing 2.5mm thick Elastomeric fire retardant insulating mat as per IS15652/2006 to withstand11 KV dielectric strength.

OD20629/2024-2025 Supply and providing 9 Liter capacity GI Fire Bucket painted in post office red with primer coat of red oxide and written with white paint &#39;FIRE&#39; mounted on MS angle frame work/ wall bracket filled with fine sand, painting the bracket/ floor stand including making good the damages, colour washing etc. as required.

OD20631/2024-2025 Supply conveyance installation of portable type ABC TYPE 5 KG Capacity fire extinguisher in position etc. as required

OD20632/2024-2025 Supply conveyance installation of portable type CO2 TYPE 4.5 KG Capacity fire extinguisher in position

OD20630/2024-2025 Supply and providing First Aid Chart duly framed and placed in a conspicuous location for clear vision.

OD20633/2024-2025 Painting letters or figures of the following sizes with enamel paint as identification mark to SB, DB, panel board etc as required 2.50 cm, 4 cm or 5 cm height

OD20634/2024-2025 Preparation of the Drawing and Schematic diagram and obtain the Application form from the Electrical Inspectorate /KSEB the actual amount may be returned on produce of original Receipts.

OD20635/2024-2025 Charges for preparation of Electrical Schematic per A3 sheet first copy

OD20636/2024-2025 Copying charges for additional copies per A3 sheet

Electrical Lift Work

OD20876/2024-2025 Annual comprehensive maintenance passenger, 1 MPS, G+3, single automatic push button with/without attendant lifts which include routine preventive and break down maintenance for a period of five years i/c repair, replacement of worn out items withminimum down time warranty &amp; guarantee of repaired/ replaced items i/c lamps,battery of ARD lighting system etc. after completion of one year of guarantee period.(Rate quoted shall be per month per lift) Cost of AMC for 5 years after completion of 1 year free maintenance AMC Charges for 2nd year considering an increase of 5% over 1st year due to inflation

OD20877/2024-2025 Annual comprehensive maintenance passenger, 1 MPS, G+3, single automatic push button with/without attendant lifts which include routine preventive and break down maintenance for a period of five years i/c repair, replacement of worn out items with minimum down time warranty &amp; guarantee of repaired/ replaced items i/c lamps, battery of ARD lighting system etc. after completion of one year of guarantee period. (Rate quoted shall be per month per lift) Cost of AMC for 5 years after completion of 1 year free maintenance AMC Charges for 3rd year considering an increase of 5% over 2nd year due to inflation

OD20878/2024-2025 Annual comprehensive maintenance passenger, 1 MPS, G+3, single automatic push button with/without attendant lifts which include routine preventive and break down maintenance for a period of five years i/c repair, replacement of worn out items with minimum down time warranty &amp; guarantee of repaired/ replaced items i/c lamps, battery of ARD lighting system etc. after completion of one year of guarantee period. (Rate quoted shall be per month per lift) Cost of AMC for 5 years after completion of 1 year free maintenance AMC Charges for 4th year considering an increase of 5% over 3rd year due to inflation

OD20879/2024-2025 Annual comprehensive maintenance passenger, 1 MPS, G+3, single automatic push button with/without attendant lifts which include routine preventive and break down maintenance for a period of five years i/c repair, replacement of worn out items with minimum down time warranty &amp; guarantee of repaired/ replaced items i/c lamps,battery of ARD lighting system etc. after completion of one year of guarantee period. (Rate quoted shall be per month per lift) Cost of AMC for 5 years after completion of 1 year free maintenance AMC Charges for 5th year considering an increase of 5% over 4th year due to inflation

Electrical Fire Fighting Work

OD20880/2024-2025 BOOSTER PUMP :-Supply, Installation, Testing and Commissioning of Booster Pump with AC driven TEFC motor, mono block, rated for 450 LPM at 35 M head 3 phase 7.5 HP complete with all accessories in position and giving connections etc. as required. (Make : LUBI)

90.14.28.2 S &amp; F Motor starters of the following ratingsThree phase DOL starters for 0.25HP to 7.5 HP motor

OD20881/2024-2025 PRESSURE GAUGE:&bull; Supply, Installation, Testing and Commissioning of Pressure Gauge in position etc as required. 100 mm dia

OD20882/2024-2025 Providing &amp; fixing of pressure switch in M.S. pipe line including connection etc.as required

OD20883/2024-2025 Providing, laying, testing &amp; commissioning of &#39;B&#39; class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees,flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 100 mm dia

OD20884/2024-2025 HOSE REEL (IMPORTED ISI MARKED):- Supply, Installation Testing &amp;Commissioning of swing type hose reel confirming to IS : 884/1985 drum made of MS sheet to keep 19 MM dia 30 M long rubber hose pipe with PVC nozzle on one end and all other necessary fixing materials in position etc as required.

OD20885/2024-2025 Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required. 100 mm dia

OD20886/2024-2025 BALL VALVE : Supply, Installation, Testing and Commissioning of Ball valve in position etc as required. 20mm dia

OD20887/2024-2025 NON RETURN VALVE:- Supply Installation, Testing and Commissioning of Nonreturn valve of following sizes without bye pass arrangements swing check type with Cast iron body and flanges drilled to IS : 1538. in position etc as required. 100MM dia.

OD20888/2024-2025 AIR RELEASE VALVE:- Supply Installation Testing and Commissioning of Air release valve 15 mm gun metal in position etc as required

OD20889/2024-2025 FIRE BRIGADE INLET 2 WAY: Supply Installation, Testing and Commissioning of fire brigade connection comprising of 2 Stainless steel inlets in position etc as required.

OD20890/2024-2025 FIRE EXTINGUISHER:- Supply and Installation of ABC Stored Pressure Type Fire Extinguisher of 4 Kgs capacity complete with initial charges and installation brackets in position etc. as required.

OD20891/2024-2025 MODULAR FIRE EXTINGUISHER:- Supply and Installation of ABC Modular Type Fire Extinguisher of 5 Kgs capacity complete with initial charges and installation brackets in position as required.

OD20892/2024-2025 FIRE DETECTION AND ALARM SYSTEM (CONVENTIONAL) Supplying, installation, testing &amp; commissioning of of MS Construction in surface/recess with stainless steel chain &amp; hammer assembly Complete with glass and push button etc. as required

OD20893/2024-2025 FIRE DETECTION AND ALARM SYSTEM (CONVENTIONAL) Supplying,installation, testing &amp; commissioning fire alarm sounder (HOOTER) with facility to make announcement, mounted in M.S. box (16 SWG) with hinged cover plate &amp; suitable for operation with amplifier i/c line matching transformer etc.complete as required

OD20894/2024-2025 FIRE ALARM PANEL :- Supply, Installation of Microprocessor based main control panel of 4 Zone, including battery charging system, with all attachment for the alarm system with auto alert facilities and made MS sheet floor/wall mounting with locking arrangements duly painted as per the fire standard requirement.

OD20895/2024-2025 Supply and providing Glow Sign boards of 3mm PVC foam board size not less than 12&quot; x 4&quot; as required

OD20896/2024-2025 Supplying and installing in position LED &quot;EXIT&quot; sign boards with battery backup. (size 30cm x 15cm)

OD20897/2024-2025 INVERTER:- Supply, Conveyance and installation of INVERTER 900 VA with 88 AH Exide Battery including testing and commissioning etc. as required.( For emergency lighting is independently connected and operated one switch.)

OD20898/2024-2025 Supply, Conveyance, installation, testing and commissioning of 3W Super Bright LED light fittings of following type Including giving connections with required length of 16/0.20 mm 3 core round copper conductor flex wire conforming to relevant ISS or with the extended original wiring, making good the damages, colour washing etc. as required. (Philips/Wipro/Crompton or equivalent)

1.21.1 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm

1.17.2 Supplying and drawing following sizes of FRLS PVC insulated copper conductor,single core cable in the existing surface / recessed steel/ PVC conduit as required.2 x1.5 sq. mm

Electrical AC Work

OD20899/2024-2025 Supply Installation Testing and Commissioning of 11.0 TR ceiling suspended inverter ductable unit with 100% inverter compressor, with ocean black fin for corrosion resistance having anti corrosive epoxy coating on heat exchanger. Anti corrosive coating to be certified by third party testing lab with minimum life span of 10 years in corrosive environment. OEM to provide certificate for the same, with R410a eco friendly gas in position and giving connections etc as required. (LG/Bluestar//Daikin/)

OD20909/2024-2025 Supply conveyance and installation of 1m size AIR CURTAIN of high velocity 1400 rpm single phase .Air through in 2m

OD20900/2024-2025 Supply and Installation of Copper Refrigerant piping(7/8 &amp; 1/2 inch ) duly insulated for required with complete elbows, Sleeves etc. with suitable supporting arrangement for individual pipes if required for ductable AC in position and giving connections etc. as required.

16.12.2.1 Supply, Installation, balancing and commissioning of fabricated at site GSS sheet metal rectangular / round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports, etc as per approved drawings and specifications of following sheet thickness complete as required.Site fabricated GSS sheet metal rectangular ducting as per IS 655-2006 for 0.63 mm thick

16.12.2.2 Supply, Installation, balancing and commissioning of fabricated at site GSS sheetmetal rectangular / round ducting complete with neoprene rubber gaskets, elbows,splitter dampers, vanes, hangers, supports, etc as per approved drawings andspecifications of following sheet thickness complete as required.Site fabricated GSS sheet metal rectangular ducting as per IS 655-2006 for 0.8. mm thick

16.15Suppluying and Fixing of powder costed extruded aluminium Supply Air Grills with aluminium volume control dampers as per specifications.

16.16.a Supplying and Fixing of powder coated extruded aluminium Return Air Grills with louvers but without volume control dampers complete as required.

OD20901/2024-2025 Supply and Installation of Control cum transmission cabling from indoor to outdoor unit in position and giving connections etc as required.

OD20902/2024-2025 Supply and installing of acoustic insulation of ducts with Nitrile Rubber 10mm Thick in position etc. as required.

OD20908/2024-2025 Supply and installation of ISO wall panelling with 50 mm thick 16kg densityexpanded FIBRE GLASS WOOL /Nitrile Rubber side covered with 0.6mm thick prepainted GI sheet with inspection opening for cleaning air filters service openings with provisions for canvas connections complete. For return air boxing for AHU of air conditioner in position etc.as required.

OD20903/2024-2025 Supply of 9kw electric strip heaters for controlling humidity complete with fixing arrangements, thermostats and safety thermostat including all power and control wiring and giving connections etc, as required. Make: Systemair/ Caryaire/ Cosmic/ Airmaster/Excel

OD20904/2024-2025 Supply and installing of thermal insulation of ducts with Nitrile Rubber 13mm Thick with Aluminium Foil in position etc as required

OD20905/2024-2025 Supply and providing PVC drain piping of suitable dia size pipe complete with standard accessories as required.

OD20906/2024-2025 Supply and Installation of Canvas Connection in position etc as required.

OD20907/2024-2025 Supply &amp; fixing of Aluminium filters with GI Frame of 12mm Thick in position etc as required.

90.14.5 Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board

1.21.2 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm

1.17.3 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 X1.5 sq.mm

90.6.4.54 Supply and drawing 650/1100 V grade FRLS PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 in the existing surface /recess conduit as required including giving necessary connections of the following sizes.10.00 sq.mm 4 Run

Bidder Name

Kittu Electricals private limited