Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹2.4 LAccepted-AOC 04042156 VALSALAKUMARI N 0404 SUB TREASURY PUNALUR | KOLLAM | KERALA | 689694 | ₹2.4 L | 1 | Accepted-AOC 1 |
| 2 | 2₹2.6 L+₹16,806 (6.94%)Rejected-AOC | ₹2.6 L+₹16,806 (6.94%) | 2 | Rejected-AOC 2 |
| Sl No | Description | Qty | Unit | Noushad.S L1 | JOSE DANIEL L2 |
|---|---|---|---|---|---|
| 1.00BLDG COMPLETION | |||||
| 1.00 | 14.1.2:Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 meters lead:Cement mortar 1:4 ( 1 cement: 4 coarse sand) | 4.92 | sqm | 550 ₹2,703.25 Lowest | 550 ₹2,703.25 Lowest |
| 1.00 | 50.6.3.1:Solid block masonry using pre cast solid blocks ( Factory made) of size 40x20x10cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth for 10 cm thick wall in CM 1:6 ( 1 cement : 6 coarse sand) including cost of scaffolding etc complete | 0.81 | cum | 7,680 ₹6,251.52 Lowest | 7,680 ₹6,251.52 Lowest |
| 1.00 | 13.1.2:12 mm cement plaster of mix:1:6 (1 cement : 6 fine sand). | 3.84 | sqm | 350 ₹1,344 Lowest | 350 ₹1,344 Lowest |
| 1.00 | 21.1.1.1:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):
For fixed portionAnodised aluminium (anodised transparent or dyed to required shade according to IS : 1868, Minimum anodic coating of grade AC 15) | 55.8 | kg | 525 ₹29,295 Lowest | 650 ₹36,270 |
| 1.00 | OD474634/2025-2026:Providing and fixing 4mm thick aluminium composite panelling fixed in aluminium
door window ventilator shutter portion EPDM rubber neoprin gasket etc.complete | 10.85 | sqm | 2,100 ₹22,785 Lowest | 2,100 ₹22,785 Lowest |
| 1.01 | 13.44.1:Finishing walls with water proofing cement paint of required shade:New work (Two or more coats applied @ 3.84 kg/10 sqm) | 491.59 | sqm | 115 ₹56,533.08 Lowest | 135 ₹66,364.92 |
| 1.01 | 11.41.2:Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm. | 67.29 | sqm | 1,700 ₹1,14,393 Lowest | 1,700 ₹1,14,393 Lowest |
| 1.01 | 21.3.1:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) | 7 | sqm | 1,250 ₹8,756.25 Lowest | 1,250 ₹8,756.25 Lowest |
Tender Value
₹2.5 L
EMD Value
₹6,356
Closing Date
13 Mar 2026, 6:00 pmClosed
JOBBY.K
Office of the Assistant Engineer LID EW section Vilakkudy GP
Annual Plan-PR.NO 348/2025-26 KUNNIKKODE AVANEESWARAM SUBCENTRE MAINTENANCE IN VILAKKUDY GP
2026_LSGD_844406_7
08/2025/AE/LID EW/VP/25-26
Open Tender
Civil Works - Buildings
Item Rate
180 days
Vilakudy GP
Please refer Tender documents.
7 documents required · 7 mandatory
₹560
Yes
₹6,356
Yes
10 Jul 2026
6 Mar 2026
16 Mar 2026
6 Mar 2026
13 Mar 2026
6 Mar 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1BLDG COMPLETION | |||||
| 1.001 | 14.1.2:Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 meters lead:Cement mortar 1:4 ( 1 cement: 4 coarse sand) | - | sqm | - | - |
| 1.002 | 50.6.3.1:Solid block masonry using pre cast solid blocks ( Factory made) of size 40x20x10cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth for 10 cm thick wall in CM 1:6 ( 1 cement : 6 coarse sand) including cost of scaffolding etc complete | - | cum | - | - |
| 1.003 | 13.1.2:12 mm cement plaster of mix:1:6 (1 cement : 6 fine sand). | 1 | sqm | - | - |
| 1.004 | 21.1.1.1:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):
For fixed portionAnodised aluminium (anodised transparent or dyed to required shade according to IS : 1868, Minimum anodic coating of grade AC 15) | 1 | kg | - | - |
| 1.005 | OD474634/2025-2026:Providing and fixing 4mm thick aluminium composite panelling fixed in aluminium
door window ventilator shutter portion EPDM rubber neoprin gasket etc.complete | 1 | sqm | - | - |
| 1.006 | 13.44.1:Finishing walls with water proofing cement paint of required shade:New work (Two or more coats applied @ 3.84 kg/10 sqm) | 0.8 | sqm | - | - |
| 1.007 | 11.41.2:Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm. | - | sqm | - | - |
| 1.008 | 21.3.1:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) | 1 | sqm | - | - |
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1425763.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.28 MB
Tendernotice_2.pdf
PDF • 0.25 MB
Tendernotice_3.pdf
PDF • 0.25 MB
BOQ_1425763.xls
BOQ • 0.30 MB
PRLAGMT.pdf
Tender Documents • 0.26 MB
SBD.pdf
Tender Documents • 0.95 MB
FOT.pdf
Tender Documents • 0.25 MB
AFFDVT.pdf
Tender Documents • 0.24 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .