Annual Rate contract for Providing and fixing of Sign Boards, Cat Eye, delineators etc. on various roads of Sub Zone-1 in South Zone (Udhana)-A, Surat

Item Description Qty. Amount (Rs.) Remarks

Supplying of Molded Shank Raised Pavement Markers

made of polycarbonate and ABS molded body and eflective

panels with micro prismatic lens capable of providing total

internal reflection of the light entering the lens face and shall

support a load of 16000 kg tested in accordance to ASTM D

4280 Type H and complying to Specifications of Category A

of MORTH Circular No RW/NH/33023/10-97 – DO III Dt

11.06. 1997. The height, width and length shall not exceed

50 mm, 100 mm and 100 mm and with minimum reflective

area of 13 Sqcm on each side and the slope to the base

shall be 35 +/- 5 degree. The strength of detachment of the

integrated cylindrical shanks, (of diameter not less than

+/- 2 mm and height not less than 30+/- 2 mm) from the

body is to be a minimum value of 500 Kgf. Fixing will be by

drilling holes on the road for the shanks to go inside, without

nails and using epoxy resin based adhesive as per

manufacturer’s recommendation and complete as directed

by the engineer. (3M or Equivalent Brand)

2 Solar Stud: Supplying of Solar Raised Pavement Markers

made of polycarbonate molded body with circular shape,

solar powered, LED self illumination in active mode,

degree illumination and reflective panels with micro

prismatic lens capable of providing total internal reflection of

the light entering the lens face in passive mode. The marker

shall support a load of 20000 kg tested in accordance to

ASTM D 4280. The marker should be resistant to dust and

water ingress according to IP 65 standards and should

withstand temperatures in the range of 0 C to 70 C. Color of

lighting could be provided in red or yellow (amber) as per

requirement and typical frequency of blinking is 1 Hz. There 226 Nos. 2088.68

should be current losses of less than 20 micro-amperes at

2.4 V in sleep-charging mode to enhance the life of the

marker and a full charge should provide for a minimum

autonomy of 50 hours. The height, width and length of the

marker shall not be less than 10 mm x 100 mm x 100 mm.

Also, the surface diameter of the marker shall not be less

than 100 mm respectively. The weight of the marker shall

not exceed 0.5 Kilograms. Fixing will be by drilling holes on

the road for the shanks to go inside, without nails and using

epoxy resin based

3 Providing Supplying & Fixing jumbo swiss type traffic

bollard made out of 1.5 mm thick CRC sheet in conical

shape having 188cms, bottom dia 30cms, top dia 22cms,

with top circular direction plate of 30cms dia for arrow

fabricated as per attached drawing and coated with black

epoxy powder coating and Retro reflectorised three yellow 45 Nos. 3729.97

strip 15cms wide and arrow Micro Prismatic grade sheeting

as per ASTM 4956-09 Type-XI Fixing with cement concrete

M-25 grade, Foundation size 30cm*30cm*35cm as per the

instruction of Engineer in charge.

4 Providing Supplying and fixing post delineators made of

ABS body fitted with high reflective, reflectors and mounted

on pipe of 50 to 70 mm dia and height varying from 450 to 45 No. 1333.20

700 mm to be installed etc. completed as per direction of

Engineer-in- charge.(3M or Equivalent Brand)

Item Description Qty. Amount (Rs.) Remarks

5 Flexible Median Marker:- Providing and Fixing of Flexible

Median Marker that are made of tough, high impact

resistant, injection-molded, thermoplastic body with

property of flexibility to provide high durability.The

dimention of flexible median marker should not exceed

18.4cm in height (including shank height), 12.5cm in

width,0.65cm in thikness and shank depth shall be

3.4cm.the body structure shall be rounded at all it's

corners and edges.the plastic used for molding the flexible

median marker should survive impact load 5kg continuosly

for 750 times at room temperature.The logo of the

manufacturer shall be embossed on either side of the

body in the injection molding process. The median marker

shall have flame like shaped body with,fluorescent yellow

colour retro-reflective sheeting of size not less than 90cm

square,with fully reflective micro prismatic cube corners as

it's retro-reflective elements as per IRC-67 2012 and

ASTM D4956-09 type XI specifications reflective values.

The retro-reflective sheeting shall be one or both sides of

the flexible medain marker and shall be edge protected

with no exposed edges which will prevent edge

lifting,vandalism,sheeting damage, etc. The flexible

median marker shall be fixed by a combination of

adhesive and grouitng as recommended by manufacturer

and Engineer in charge

6 Providing and laying cement concrete 1:1.5:3 (1 cement ;

1.5 sand ; 3 graded ston aggregate. 20 mm niminal size)

finishing smooth curing etc.comp. incld. Cost of formwork

but excl. cost of reinforcement for reinforced concrete work 25 CM 4250.50

in ; (A) Foundation, Footing, Base of Columns and Mass

7 Regulatory / Mandatory Sign :- Providing and fixing sign

boards made out of 2mm aluminium sheet / 4mm ACP

(Aluminum composite Panel); size 60 cms. Dia Circle as per

design of IRC-67-2012. Pre treated with phospheting

process & acid etching; coated with one coat of epoxy

primer and two coats of best quality epoxy paint ;

reflectorised with High Intensity Prismatic Grade retro

refiectivesheeting of Type-4 as per ASTM D-4956 and latest

M.O.S.T.Specifications; 3.6mtr long stand post of Iron Angle

75 x 75 x 6mm / 65NB Circular MS Pipe as required and

frame fabricated from suitable size iron angle of 35 x 35 x

3mm; painted with bestquality epoxy coatings in black and 65 Nos.. 3540.12

white bends. The details of symbol for each board shall be

as per the instruction of engineer in charge. The fixing at

site shall be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for

each leg including excavation, curing etc.complete under

the supervision of engineer in charge. A warranty for

years for the Retro reflective sheeting from original

manufacturer & a certified copy of 3 year outdoor exposure

test report from third party test lab for the product offered

shall be submitted

(B) Class -B Type-4 Retro Reflective Sheeting

8 Cautionary Warning Sign :-Providing and fixing sign

boards made out of 2mm aluminium sheet / 4mm ACP

(Aluminum composite Panel); size 90 x 90 x 90 cms.

equilateral triangle as per design of IRC-67-2012. Pre

treated with phospheting process & acid etching; coated

with one coat of epoxy primer and two coats of best quality

epoxy paint ; reflectorised with High Intensity Prismatic

Grade retro refiectivesheeting of Type-4 as per ASTM D-

4956 and latest M.O.S.T.Specifications; 3.6mtr long stand

post of Iron Angle 75 x 75 x 6mm / 65NB Circular MS Pipe

as required and frame fabricated from suitable size iron

angle of 35 x 35 x3mm; painted with bestquality epoxy

coatings in black and white bends. The details of symbol for

each board shall be as per the instruction of engineer in

charge. The fixing at site shall be in 1:2:4 CC blockof size

45 x 45 x 60 Cms. for each leg including excavation, curing

etc.complete under the supervision of engineer in charge. A

warranty for 7 years for the Retro reflective sheeting from

original manufacturer & a certified copy of 3 year outdoor

exposure test report from third party test lab for the product

offered shall be submitted by contractor. (B) Class-B Type-4

Retro Reflective sheeting

Item Description Qty. Amount (Rs.) Remarks

9 Facility Informatory Sign :-Providing and fixing sign boards

made out of 2mm aluminium sheet / 4mm ACP (Aluminum

composite Panel); size 80 x 60 cms. rectangular as per

design of IRC-67-2012. Pre treated with phospheting

process & acid etching; coated with one coat of epoxy

primer and two coats of best quality epoxy paint ;

reflectorised with High Intensity Prismatic Grade retro

refiectivesheeting of Type-4 as per ASTM D-4956 and latest

M.O.S.T.Specifications; 3.6mtr long stand post of Iron Angle

75 x 75 x 6mm / 65NB Circular MS Pipe as required and

frame fabricated from suitable size iron angle of 35 x 35 x

3mm; painted with bestquality epoxy coatings in black and 185 Nos. 3990.64

white bends. The details of symbol for each board shall be

as per the instruction of engineer in charge. The fixing at

site shall be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for

each leg including excavation, curing etc.complete under

the supervision of engineer in charge. A warranty for

years for the Retro reflective sheeting from original

manufacturer & a certified copy of 3 year outdoor exposure

test report from third party test lab for the product offered

shall be submitted

10 STOP Sign :-Providing and fixing sign boards made out of

2mm aluminium sheet / 4mm ACP (Aluminum composite

Panel); size 90 cms. Octagonal as per design of IRC-67-

2012. Pre treated with phospheting process & acid etching;

coated with one coat of epoxy primer and two coats of best

quality epoxy paint ; reflectorised with High Intensity

Prismatic Grade retro refiectivesheeting of Type-4 as per

ASTM D-4956 and latest M.O.S.T.Specifications; 3.6mtr

long stand post of Iron Angle 75 x 75 x 6mm / 65NB Circular

MS Pipe as required and frame fabricated from suitable size

iron angle of 35 x 35 x 3mm; painted with bestquality epoxy

coatings in black and white bends. The details of symbol for

each board shall be as per the instruction of engineer in

charge. The fixing at site shall be in 1:2:4 CC blockof size

45 x 45 x 60 Cms. for each leg including excavation, curing

etc.complete under the supervision of engineer in charge. A

warranty for 7 years for the Retro reflective sheeting from

original manufacturer & a certified copy of 3 year outdoor

exposure test report from third party test lab for the product

offered shall be submitted by contractor. (B) Class-B Type-4

Retro Reflective sheeting.

11 PARKING SIGNS: Providing and fixing sign boards

made out of 2mm aluminium sheet / 4mm ACP (Aluminum

composite Panel); size size 60 x 60cms. sequare plus

60 x 20cms rectangular additional plate as as per the design

of IRC-67-2012. Pre treated with phospheting process &

acid etching; coated with one coat of epoxy primer and two

coats of best quality epoxy paint ; reflectorised with High

Intensity Prismatic Grade retro refiectivesheeting of Type-4

as per ASTM D-4956 and latest M.O.S.T.Specifications;

3.6mtr long stand post of Iron Angle 75 x 75 x 6mm / 65NB

Circular MS Pipe as required and frame fabricated from

suitable size iron angle of 35 x 35 x 3mm; painted with 65 Nos. 4351.31

bestquality epoxy coatings in black and white bends. The

details of symbol for each board shall be as per the

instruction of engineer in charge. The fixing at site shall be

in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for each leg

including excavation, curing etc.complete under the

supervision of engineer in charge. A warranty for 7 years for

the Retro reflective sheeting from original manufacturer & a

certified copy of 3 year outdoor exposure test report from

third party test lab for the product offered shall be submitted

by contractor. (B) Class-B Type-4 Retro Reflective sheeting.

Item Description Qty. Amount (Rs.) Remarks

12 Give Way Sign :-Providing and fixing sign boards made out

of 2mm aluminium sheet / 4mm ACP (Aluminum composite

Panel); size 90 x 90 x 90 cms. equilateral triangle as per

design of IRC-67-2012. Pre treated with phospheting

process & acid etching; coated with one coat of epoxy

primer and two coats of best quality epoxy paint ;

reflectorised with High Intensity Prismatic Grade retro

refiectivesheeting of Type-4 as per ASTM D-4956 and latest

M.O.S.T.Specifications; 3.6mtr long stand post of Iron Angle

75 x 75 x 6mm / 65NB Circular MS Pipe as required and

frame fabricated from suitable size iron angle of 35 x 35 x

3mm; painted with bestquality epoxy coatings in black and

white bends. The details of symbol for each board shall be 110 NO. 3867.51

as per the instruction of engineer in charge. The fixing at

site shall be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for

each leg including excavation, curing etc.complete under

the supervision of engineer in charge. A warranty for

years for the Retro reflective sheeting from original

manufacturer & a certified copy of 3 year outdoor exposure

test report from third party test lab for the product offered

shall be submitted by contractor. (B) Class-B Type-4 Retro

Reflective sheeting

13 Direction (Junction) Sign :-Providing and fixing sign

boards made out of 2mm aluminium sheet / 4mm ACP

(Aluminum composite Panel); size 244x122 cms.

rectangular as per design of IRC-67-2012. Pre treated with

phospheting process & acid etching; coated with one coat of

epoxy primer and two coats of best quality epoxy paint ;

reflectorised with High Intensity Prismatic Grade retro

refiectivesheeting of Type-4 as per ASTM D- 4956 and

latest M.O.S.T.Specifications; 4.0mtr (2 Nos.) long stand

post of Iron Angle 75 x 75 x 6mm / 65NB Circular MS Pipe

as required and frame fabricated from suitable size iron

angle of 50x50x5mm; painted with bestquality epoxy 25 Nos. 21287.51

coatings in black and white bends. The details of symbol for

each board shall be as per the instruction of engineer in

charge. The fixing at site shall be in 1:2:4 CC blockof size

45 x 45 x 60 Cms. for each leg including excavation, curing

etc.complete under the supervision of engineer in charge. A

warranty for 7 years for the Retro reflective sheeting from

original manufacturer & a certified copy of 3 year outdoor

exposure test report from third party test lab for the product

offered shall be submitted by contractor. (B) Class-B Type-4

Retro Reflective sheeting.

14 Distance Informatory / Destination Sign :-Providing

and fixing sign boards made out of 2mm aluminium

sheet / 4mm ACP (Aluminum composite Panel); size

180x120 cms. rectangular as per design of IRC-67-

2012. Pre treated with phospheting process & acid

etching; coated with one coat of epoxy primer and

two coats of best quality epoxy paint ; reflectorised

with High Intensity Prismatic Grade retro

refiectivesheeting of Type-4 as per ASTM D-4956 and

latest M.O.S.T.Specifications; 4.0mtr (2 Nos.) long

stand post of Iron Angle 75 x 75 x 6mm / 65NB

Circular MS Pipe as required and frame fabricated

from suitable size iron angle of 50 x 50 x 5mm; 30 Nos. 18073.46

painted with bestquality epoxy coatings in black and

white bends. The details of symbol for each board

shall be as per the instruction of engineer in charge.

The fixing at site shall be in 1:2:4 CC blockof size 45 x

45 x 60 Cms. for each leg including excavation, curing

etc.complete under the supervision of engineer in

charge. A warranty for 7 years for the Retro reflective

sheeting from original manufacturer & a certified

copy of 3 year outdoor exposure test report from

third party test lab for the product offered shall be

submitted by contractor. (B) Class-B Type-4 Retro

Reflective sheeting

15 Providing and fixing retro reflective sheeting as per latest

M.O.S.T./ MoRTH Specifications as directed by the

engineer.(3M or Equivalent Brand)

Item Description Qty. Amount (Rs.) Remarks

16 Providing and Fixing of powder coating red matt finished

MS pipe bollards made from 100mm O.D & 7.5mm thick

M.S pipe having length of 1050mm, 3mm deep, 25mm wide

groove covered by 25mm wide white retro reflective strips

hollow section shall be filled with cement concrete

foundation inclusive of excavation,fixing, refilling of

excavated material, grouting with cement concrete and

anchar bar/ anchar fastner (hilti or equivalent), removal of

debris etc as shown in drawing and directed by Engineer in

charge. (Sample must be approved.)

17 Signage Pole (Safety Bollard) for Junctions

(M.S.Cylindrical pipe of approved brands) of Size, 8 inch

Dia, height-8feet. Wall thickness of pipe 3mm with base

plate of 12mm M.S. base plate, round shape, cut 4 holes on

surface. M.s cleats welded with base plate & pole surface of

90 deg. includes 4 nos. Bolts to fasten the pole & ground,

with chemical filling. work includees rectro reflective vinyl,

Red/Blue & White High density, High grade 3M or

equivalent-Diamond grade Displaying: BRTS Letters with

Arrow & Bus logo on the middle Blue background with read

& white band type display on top & bottom as per the

approved design. shall be installed over flexible or rigid

pavemen. As per instructions of engineer in charge.

18 (A) Information Board:- Retro reflective (Type-11) with

ECF over lay supported on Aluminum composite panel fixed

on MS SHS 25mm x 25mm x 2.5mm (3mm Both Side) and

supported on MS Angel 75mm x 75mm x 6mm etc 22 Nos. 5942.00

completed as instructed by engineer incharge

(B) Only Retro reflective (Type-11) with ECF over lay

supported on Aluminum composite panel fixed on (3mm

Both Side) Existing Support etc completed as instructed by 31 Nos. 5832.00

engineer incharge

19 Hazard Marker Sign :-Providing and fixing sign boards

made out of 2.0 mm aluminium sheet / 4 mm ACP

(Aluminum composite Panel); size 90x30 cms. rectangular

as per design of IRC-67-2012. Pre treated with phospheting

process & acid etching; coated with one coat of epoxy

primer and two coats of best quality epoxy paint ;

reflectorised with High Intensity Prismatic Grade retro

refiectivesheeting of Type-4 as per ASTM D-4956 and latest

M.O.S.T.Specifications; 1.8mtr long stand post of Iron Angle

75 x 75 x 6mm / 65NB Circular MS Pipe as required and

frame fabricated from suitable size iron angle of 35 x 35 x

3mm; painted with bestquality epoxy coatings in black and 25 Nos. 3483.85

white bends. The details of symbol for each board shall be

as per the instruction of engineer in charge. The fixing at

site shall be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for

each leg including excavation, curing etc.complete under

the supervision of engineer in charge. A warranty for

years for the Retro reflective sheeting from original

manufacturer & a certified copy of 3 year outdoor exposure

test report from third party test lab for the product offered

shall be submitted by contractor. (B) Class-B Type-4 Retro

Reflective sheeting

20 Provision of Traffic cones for limited period at suitable

locations as per requirement during the construction in

construction zone comprising of warning zone, approach 210 Nos. 501.00

transition zone, working zone and terminal transition zone

21 Supplying and fixing the necessary blinkers, delineator as

per site requirement and as directed by engineer in charge

A Delineators 110 Nos. 850.00

C Blinkers 45 Nos. 3850.00

Item Description Qty. Amount (Rs.) Remarks

21 Providing and fixing Aluminium Composite Panel of Alum

Decor, Indobond & Flexibond make to all surfaces 4mm

thick in required colours of exterior consisting of two layers

of aluminium skins of 0.25mm thick sandwich in a thermo

plastic core in continuous lamination process with PVDF

coating of exterior grades ensuring long life colour and

fungal resistance. Base frame work with aluminium sections

shall be fixed over the all surfaces, ACP shall be fixed to the 58 Sqmt. 1310.98

frame work as cladding it includes cost of labour , materials,

accessories, adhesive, scaffolding, wastages, transport,

taxes, fixing into a neat finish in aesthetic point of view,

without any undulations in facias all complete as per

instructions of the Engineer in charge.

22 Providing and sticking vinyl with eight colour eco solvent

and epson printing. The Vinyl shall be of 100 microns 3M

media. The vinyl shall be laminated by 80 microns film after

the printing and before sticking. The sample of the same

shall be approved by the Engineer-in-charge and shall be

stuck in line and level without any crease or bubbles on the

pre laminated board / acrylic sheet using 3M adhesives

surface. The graphics shall be provided. The contractor

shall check the graphic size and the available surface before

printing. The 3M vinyl signage shall be stuck firmly on 3mm

thick SS 304L grade sheet as per designs. The sheet shall

be firmly fixed using SS 20mm dia studs as per the designs.

The contractor shall ensure that the signage sheets are

fixed in correct line, level and plumb. The rates shall be

excluding SS sheet but including signage material including

fixing and other related costs like transportation, electricity

23 Providing, erecting and fixing in position structural steel

sections of Yst 310 grade of TATA, Kamdhenu, Jindal of

Asian confirming to IS:4923 purlins, roof trusses, columns,

side runners, ties, bracings, framing etc, including all types

of base plate, gusset plate, cap plate, bearing plate, stiffner,

cleats etc. complete and structural steel confirming to IS:226

including necessary pipes, rolled joists, channels, angles,

tees, MS flats, angle cleats, gusset plate, bright bars,

chequered plates, cross plates as per required thickness

including cutting, welding, riveting as per structural details

and good engineering practice grinding and cleaning the 5 KG. 90.47

members as specified by Engineer in charge. (only finished

measurements shall be paid for billing purpose). No extra

payment shall be made for grouting that has to be done

under the base plate to get full bearing on supporting sub

strata. The paint shall be oil paint in three coats to get an

even look over a coat of red lead paint as per the instruction

of the engineer-in-charge. The rate shall also be inclusive of

screws, bolts, nuts, washers, hinges, pivots etc.

24 Providing and fixing retro Reflective Hi Intensity Micro

prismatic Grade Board using 2mm Aluminum / 4mm ACP,

angle iron 75 x 75 x 6mm. Descaling and degreasing the

board as per requirement using epoxy reflactive process by

screen painting as directed etc. complete including

transporting and fixing in C.C. 1:2:4 with necessary

excavation curing etc. complete as per I.R.C. 67-2012 64 Sqmt. 7535.31

design. A warranty for 7 years for the Retro reflective

sheeting from original manufacturer & a certified copy of

year outdoor exposure test report from third party test lab

for the product offered shall be submitted by contractor.

(B)Class B Type-4(MDR/ODR) retro reflective sheeting

Executive Engineer

Sign of Contractor South Zone-A (Udhana)

Surat Municipal Corporation