Supply and Installation of Motor pump set in the Kumaramputhur Lift Irrigation Scheme in Pallassana Grama Panchayath

Amount

Cement concrete 1:2:4 using 20mm (nominal size) broken stone for reinforced concrete work.

Plastering with cement mortar 1:4, 12mm thick one coat.

Supply,Conveyance,erection,testing and commissioning of KIRLOSKAR Make Horizontal Monobloc Pump, 5HP, 3Phase,415V, 50HZ, 2880 RPM, Model KDS 520+ (80X80 MM) Head Range 6M to 22M discharge range 24 LPS to 11LPS. Discharge at 10M -79200 LPH. All C.I.with C-40 shaft and gland packing arrangement etc.on suitable CC foundation in correct alignment including providing suitable foundation bolt & nut as directed at site and take trail run etc.complete.

Supply, fabrication, installation, testing and commissioning of wall/floor mounting type industrial pattern panel board of suitable size so as to accommodate the following item. Incoming :- 32A,415 V, 50 Hz, TPN SFU HRC with 16A HRC fuses-1No. Out going :- 1. DOL Starter suitable for 5 HP motor. (L/T make) -1No. 2. 2 KVAR Capacitor -1 No. 3.4 Pole enclosure - 1No. 4. 16A 4 Pole ELCB,100mA -1 No. 5. Single phasing preventer - 1No. 6. Phase Indication Lamp with 0.5wLED Bulb - 3 Nos. 7. 20 A, 415 V Backelite fuse unit with 2 A-16A clip-on offset tag fuse link of size f1 - 3 Nos. The board shall be fabricated incorporating the above items including painting the board with 2 coats of enamelled paint over a coat of Zinc chromate primer etc. including all charges.

Supply and providing,laying and fixing of 80mm dia B class Medium G.I.Pipe with specials in ground etc.complete including all charges.

Do - 80mm dia (3") or nearest size Cast iron Foot Valve Kirloskar make with all accessories etc.complete including all charges.

Supply and fitting 80mm GI flange with all accessories as required.

Supply and fitting 80mm GI flange washer with all accessories as required.

Supply and fitting 75/80mm GI Barrel nipple 15mm with all accessories as required.

Supply and fixing of following sizes of light gauge PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 20 mm. (90.6.10.1)

Do - 25 mm- Do - (90.6.10.2)

Supply and drawing 650/1100 V grade FRLS PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 in the existing surface / recess conduit as required including giving necessary connections of the following sizes. 4.00 sq.mm 4 Run.(1.17.22)

4.00 sq.mm 3 Run. (1.17.21)

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2 metre long etc. with charcoal/coke and salt as required.(od14959/2019_2020)

Providing and fixing 25mmx3mm G.I strip earth lead from the test joint to the earth plate. (od14961/2019_2020)

Do - 2x25mmx3mm G.I strip test joint for earthing system. (od68978/2018_2019)

Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required. 2.00 copper conductor.(14SWG) (90.16.1.1)

Do - 3.15 mm copper conductor (10 SWG) (90.16.1.3)

Supply and laying of 15mm B class GI pipe(medium class) with all required accessories laid 0.6m below ground level including excavating trench of suitable size and refilling etc.as requiredas protective covering to earth leads. (90.16.2.1)

Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.2.00 mm (14 SWG) (90.16.5.1)

Do - 3.15mm copper earth socket and including crimping etc. as required. (90.16.5.3)

Supply and providing12x3mm brass nut and bolt etc.as required.(od21888/2019_2020)

Supply and providing 25 x 6 mm brass nut and bolt etc.as required.(od20879/2019_2020)

Supply and clamping 25 x 3 mm copper strip on surface of wall as earth bus making good the damages, colour washing etc. as required. (90.16.3.9)

Supply and wiring points using rigid PVC conduit of 20 mm with specials, duly clamped or concealed suitably and with 1.00 sq mm FRLS PVC insulated stranded single core copper conductor cable 650V grade, including providing switch board main and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket, brass bolt and nut crimping etc.complete with suitable size modular type metal switch boxes, modular type front plates (white) etc.up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete as required.

Single Control light point with 6A, plate ceiling rose - Short point (90.2.1.1 )

Single control ceiling fan point with 6 A, 3 plate ceiling rose & with socket size stepped electronic regulator. - Short point (90.2.1.4)

Combined plug point with 6 A, 5 pin plug socket controlled by 6 A switch in the same switch board as that of light points. (90.2.1.6)

Supply, conveyance installation testing and commissioning the light fittings of following types complete with all accessories and lamps etc. including supplying and fixing ball and socket arrangements on PVC round block, suspension down rod of 19mm dia MS conduit up to 2x30cm length including painting and wiring the down rod with 16/0.20mm 3 core round copper conductor flex wire conforming to relevant ISS or extending the original wiring and giving connections etc. as required.

1200 mm 1X20W LED Lamp with box type fixture (90.3.24.3)

Supplying and providing extra H.G/ ISI marked, steel conduit down rod of 19/20 mm dia 2 x 1.00 m long with 16/0.20 mm 3 core copper conductor flex wire conforming to relevant ISS or with the extended original wiring and giving connection etc. as required. (90.3.10)

Supply and fixing cast aluminium stove enamelled bulk head fitting with deep drawn anodised aluminium body,epoxy powder coated,heat resistant prismatic glass cover suitable with 7w LED bulb to wall/ceiling including giving connections with required length of 16/0.20mm PVC insulated 3 core round copper conductor flex wire conforming to to relevant ISS or extending the original wiring and making good the surface as required.(od15213/ 2019_2020)

Supply, conveyance, installation, testing and commissioning of pre-wired light fitting of LED Street light fitting IP 65,pressure die-cast housing with induvidual LEDs with modular secondary optics 25watts with driver and including all necessary all accessories etc in the existing GI pipe and giving connections with required length of 16/0.20mm 3 core copper conductor flex wire conforming to relevant ISS or extending the original wiring and giving connection etc. as required - BAJAJ make BRLEP25W LED/Endura Citylite Platinum 25 LED / osram strada plus/ phillips make.(od20530/2019_2020)

Supply, fabrication, conveyance and fixing the following sizes of B class GI pipe bent to shape / cut and welded to shape and fixing the same to wall / parapet using clamps as noted along with each size, painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer, making good the damages, colour washing etc as required.25 mm dia with HG company fabricated clamps.(90.3.18.1)

Supply and fixing of following sizes of light gauge PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 20 mm. (90.6.10.1)

Supply and drawing 650/1100 V grade FRLS PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.

4.00 sq.mm 2 Run (1.17.20)

2.50 sq.mm 2 Run (1.17.11)

S&F following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc. as required.3 Module (100mmX75mm) (1.27.2)

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.6 pin 15/16 amp socket outlet.(1.24.5)

Do - 15/16 amp switch. (1.24.3)

Supply and installation of sheet steel, phosphatised and painted,dust and vermin proof enclosure of MCB DB including copper /brass bus bar,neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall, making good the damages, colour washing etc.as required. 4way (8+12) - double cover TPN vertical DB with provision for fixing 4P MCB / Isolator/ RCCB/ RCBO as incomer and SP/ TP MCB as outgoing (IP 42/43) (90.11.1.14)

Do - 8 way, Double door. (2.3.2)

Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

40 amps 4 pole isolator (2.13.1 )

40 amps 2 pole isolator (2.12.1)

Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 30/100 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.

25/32 A rating, 4 pole RCCB, 100 rnA (2.15.1)

25A rating, 2 pole RCCB, 30 rnA (2.14.1 )

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

6 A. to 32 A. ratings , SP MCB, "C" curve,10 kA breaking capacity. (2.10.1 )

Do - 6 A. to 32 A. ratingsTP MCB, "C" curve,10 kA breaking capacity. (2.10.4 )

Do - 6A to 32A ratings DP MCB "C" curve,10 kA breaking capacity - Do - (2.10.3)

Supply and providing and fixing 32A TPN disconnector fuse switch unit in sheet steel enclosure with ISI marked HRC fuses on wall/angle iron frame including drilling holes in frame, making connections etc.as required.

Supply & installation of dust and vermin proof, 3 Phase Sintex Meter Board( GS - MB - 5628 (515x240x145) including p/f 3 Nos 32/40 A HRC Fuse Base with HRC Fuse link ,16/32 A neutal link and to fix KSEB meters, etc as required including fixing it on wall, making good the damages colour washing etc.as required. (od21904/2019 _ 2020)

Supply & installation of dust and vermin proof, 1 Phase Sintex Meter Board( GS-MB- 3525 (350x250x150)) including p/f 32 A HRC Fuse Base with HRC Fuse link ,32 A neutal link and to fix KSEB meters, etc as required including fixing it on wall, making good the damages colour washing etc. as required. (od14963/ 2019_2020.)

Supply,fabrication,conveyance and fixing the following sizes of B class GI pipe bent to shape/cut and welded to shape and fixing the same to wall/parapet using clamps as noted along with each size,painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer,making good the damages,colour washing etc.as required.32mm dia with HG company faricated clamps.(90.3.18.2)

Do - 25 mm dia with HG company fabricated clamps. (90.3.18.1) For Srevice Pipe.

Supply and providing M8 anchor bolt hook in wall / parapet for binding support for service main.

Sanju Rajan

Bidder Name

Mohammed Rafik

Sanju Rajan