WBMAD/ULB/HM/APAS- 2 (2025-26)

Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity) (P.No.2 T/4), 5th corrigenda,

Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand. (P.14, T/1)

(I) Cement concrete with graded stone ballast (40 mm size excluding shuttering) In ground floor P.no. 34, I.T/22(a)), 3rd corrigenda, (A) [Pakur Variety] (a) 1:3:6 proportion

Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners including raking out joints or roughening of concrete surface and application of cement slurry before flooring works using cement @ 1.75 kg/sq.m all complete including all materials and labour. In ground floor. 3 mm. thick topping (High polishing grinding on this item is not permitted with ordinary cement). Using grey cement (i) 20 mm. thick P.No-48 , Item-6 (3rd Corrigendum)

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] (i) With 1:6 cement mortar (a) 20 mm thick plaste (Outside) Page No.189,Item No.-1 (3rd Corrigendum)

(i) With 1:6 cement mortar (a) 10 mm thick plaster (Inside)

Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. (P-64, T/35) (B) Wall With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m

Add extra for each additional floor over the rate for ground floor on items (3 to 6) and item (8), (15 to17) of subhead A (i) Upto 4th floor (1ST FLOOR)

Applying Interior grade Acrylic Primer of approved quality and brandon plastered or cencrete surface old or new surface to receiveDistemper/ Acrylic emulsion paint including scraping and preparingthe surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (In Ground Floor) i) Water based interior grade Acrylic Primer one coat (P.195, T/7 (i)) (B) INNER WALLS (GROUND FLOOR)

Add extra for each additional floor over the rate for ground floor on items (3 to 6) and item (8), (15 to17) of subhead A (B)INNER WALLS (1ST FLOOR)

Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per ma nufacturer's specification and as per direction of the EIC. In Ground Floor: (a) One Coat (P-196, T/8(a)) OUTSIDE GROUND FLOOR

(first floor) Add extra for each additional floor over the rate for ground floor on items (3 to 6) and item (8), (15 to17) of subhead A OUTSIDE

Add extra for each additional floor over the rate for ground floor on items (3 to 6) and item (8), (15 to17) of subhead A 1st Floor

Add extra for each additional floor over the rate for ground floor on items (3 to 6) and item (8), (15 to17) of subhead A 1st Floor

1st Floor