Loading…
Loading…
Tender Value
₹3.9 Cr
EMD Value
₹3.9 L
Closing Date
20 Apr 2026, 6:00 pmClosed
Similar tender results from the same govt authority in the past 3 years.
Executive Engineer,Panchayat Irrigation Division,Chhota Udepur
Repair and Maintenance Works for Khandi Minor Irrigation Scheme - Canal Network, Taluka: Pavi Jetpur, Dist: Chhota Udepur
286911
10/2025-26
Open
Civil Works - Others
Chhotaudepur
₹6,000
Yes
Executive Engineer,Panchayat Irrigation Division,Chhota Udepur
₹3.9 L
Yes
18 Mar 2026
18 Mar 2026
18 Mar 2026
20 Apr 2026
18 Mar 2026
Bill of Quantities
SR COST PER AMOUNT
1 Clearing the shrubs, like akadas, weeds and other
vegetables including depositing the same outside
and burning etc. complete from canal bed, top and 4.52 km 5776.00
both slopes of the banks, for canal with discharge.
Below 20 cusecs.
2 Cutting down the trees of different girths, (at 45 cm
above G.L.) including removing & grubbing roots
below ground level within the canal boundary
including stacking the wood outside the canal 325.00 No. 722.00
boundary as directed etc. complete.
(a) Girth above 0.50 & upto 1.00 m
3 Dismantling the existing road surface including
disposing off the dismantled materials and
stacking the useful material as directed (b) Asphalt
4 Excavation of canal in all sorts of soil including
yellow, sand and gravely soils and murrum
including depositing the excavated stuff in uniform
layers in banks as and where directed including
dressing the section etc. complete for lead upto 50 8059.65 Cum 259.90
m and lift for depth for cutting as under.
For Canals Between 5 to 50 Cusec. & 0 to 1.5 m
5 Dismantling the existing stone masonry including
sorting out and stacking the useful material and
removing the debries and making good the 318.69 Cum 750.90
damages etc. complete as directed. In Cement
6 Dismantling the existing R.C.C. Pipes including
sorting out and stacking of the useful materials of
the following diameters including refilling the 282.00 Rmt 577.60
trenches etc. complete as directed. (e) 450 -
600MM dia pipe.
7 Dismantling the existing R.C.C. Pipes including
sorting out and stacking of the useful materials of
the following diameters including refilling the 90.00 Rmt 866.40
trenches etc. complete as directed. (d)NP-2 Pipe
for 600 mm. to 900 mm. Dia pipes.
8 Dismantalling the C.C. lining including including
disposing off the dismentalled materials as
directed etc. complete. (a)7.50 cm thick
9 Earthwork/Back filling with selected earth
including watering ramming,Compaction with
pnuematic temping with all lead and all lift etc 13199.74 Cum 144.50
10 Trimming of the canal section manually for
preparing sub grade for laying cement concrete
lining in all sorts of soil and murrum including 20453.00 Sqmt 72.80
watering and compacting bed etc. complete.
11 Providing and laying plain/reinforced cement
concrete lining of M 15 (MSA 20 mm) in bed, side
slopes and curvature including batching, mixing,
transporting, placing, vibrating, smooth finishing, 22578.00 Sqmt 327.90
curing including dewatering where required.
(MACHINERY BASED by "FLORI" - WITHOUT
PAVER WATER CURING)
12 Providing groove and filling expansion joint of size
12 mm wide and 25 mm deep in canal lining during
construction with two coats of primer and filled 3097.12 Rmt 34.70
with bituminious and fine sand in proportion of 2:1,
as directed etc. complete.
13 Providing & Placing in position reinforcement bars
including cutting, bending, welding joints where
necessary, hooking etc. complete as per drawing 51.97 MT 82019.00
for all lead and lifts. TMT / CRS (FE 500 D)
14 Providing following types of Kundis/Airvents/
outlets as per drawing & designs, duly completed
& tested curing etc complete. Outlets ( Masonry 19.00 Nos. 16307.00
chamber & 9 " outlet pipe)(i) (1 x 1 x 1) m
15 Reparing of steel gate including providing basic
steel material; M.S. Shaft plate, angles, channels
etc. incl. fabriction transporting to site & erection 1439.37 Kg 127.20
and painting etc. complete.
16 Excavation for foundation in overburden in all
sorts of soil hard murrum , gravel etc including
shoring , strutting and depositing the excavated
stuff in regular stacks or layers with lead up to 500 1577.51 Cum 110.50
mtr and all lifts. (By Machinery) including
17 Excavation for foundation trenches in all sorts of
soil sand clay, hard clay, soft murrum including
shoring, strutting and depositing the excavated
stuff, refilling the remaining excavated trenches 1531.00 Cum 311.90
upto G.L. as and where directed within a lead of
m. etc. complete as directed. (a) Upto 1.50 m
18 Providing & Laying in position "NOMINAL MIX"
cement concrete using cement, sand and crushed
aggregate by mass and machine mix for
C.C./R.C.C work incl. necessary formworks
centering, scaffolding, compaction by vibrator, 2099.52 Cum 3935.00
curing as directed with all lead & lift etc complete
Without Dewatering and excluding cost of steel
reinforcement. (d) C. C. Nominal Mix, M-15 and
19 Providing & Laying in position "NOMINAL MIX"
cement concrete using cement, sand and crushed
aggregate by mass and machine mix for
C.C./R.C.C work incl. necessary formworks
centering, scaffolding, compaction by vibrator, 1510.78 Cum 4296.00
curing as directed with all lead & lift etc complete
Without Dewatering and excluding cost of steel
reinforcement. (f) C. C. Nominal Mix, M-20 and
20 Providing and fixing in position ( different
diameter ) I.S.,NP-3 class reinforced pipe with
caulking the joints with cement mortar 1:1
proportion,using jute string soaked in cement 929.69 Rmt 2857.70
slurry, finishing joints and laying pipes to the
designed grade and levels, curing etc. complete
for all leads and lifts. NP-3 class 900mm dia pipe.
21 Providing and fixing steel grill over canal syphon
well as directed etc. complete as per drawing. 1272.00 Kg 67.90
22 Providing and fixing in position 450 mm wide steps
( for ladder) of 28mm diameter bars at a spacing of
30 cm c/c with M.S. angle frame of 40x40x6 mm
size including painting the same with two coats of 351.00 No. 386.70
oil paint etc. complete.
23 Manufacture. Supply & Delivery of Electric
Resistance Welded (Up to 400mm)/Submerged
Arc Welded(Above 400mm) M.S.Pipe having
beveled ends plate or coil conforming to IS-3589-
2001 or its latest revision/ ammendment for
following thickness outside diameter at GWSSB
store or sile anywhere in Gujarat State including all
taxes. insurance, lransportation, freight charges,
oclroi, inspection charges, loading, unloading 65.00 Rmt 15153.00
conveyance to Departmental stores, stacking etc.
all complete. (Rate for MS Pipe based on the ex.
works price of HR Coil as Rs.67500.00 per MT-
withouth GST (Above 3.15 mm to 10 mm) & Rs.
68000.00 per MT without GST (Above 10 mm) as on
Feb-22.( WPIIndex of H. R Coi! of Jan-22 is 155.8)
d. 1/S Bare & 0/S Gunniting (25 mm thick) - 914 mm
OD and 8 mm thick
24 Lowering, laying, Jointing & welding in position to
correct line & level M.S. Pipe with outer gunniting
& inside lining/Epoxy painting on pedestal or
chairs upon prepared formation or prepared
bedding in trenches the rates include conveyance 65.00 Rmt 825.00
from store to site of work loading, unloading, joint
plastering, hydrotesting etc.complete.
b. above 7 mm thick pipe dia 914 mm
Total Cost (Rs.)
I/We am/are willing to carry out the work at… ...................... % above/below percent (Should
be written in figures and words) of the estimated rate mentioned above. Amount of my
/our tender works out as under.
Estimated amount put to tender Estimated amount put to tender
Deduct………% below Add………% Above
In words In words
Contractor Executive Engineer
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
Khandi SBD.pdf
Schedule B.pdf
Khandi Canal NIT.pdf
Documents Proivided By Bidders.pdf
Download all tender documents and submit your bid