PROVN OF SUBSTATION URINAL POINT AND PATHWAYS KHUMBIGRAM UNDER GE SILCHAR

Amount

PART-I(B/R WORKS) Surface dressing n exc 15 cm deep as in soft / loose soil , complete all as specified and directed.

Excavation in trenches not exceeding 1.50 meter wide and not exceeding 1.5 meter in depth and getting out in soft/loose soil complete all as specified and directed.

Excavating over areas, n exc. 1.5 m deep and getting out in soft / loose soil complete all as specified and directed.

Excavating over areas, exc. 1.5 m deep but n exc. 3 m deep and getting out in soft / loose soil complete all as specified and directed.

M & L for Sand filling under floors or in foundations including watering and consolidationcomplete all as specified and directed.

Returning filling in incl watering, ramming in layers n.exc. 25cm thick in soil complete all as specified and directed.

Removing excavated surplus soil to a distance n.exc. 50m and depositing where directed at level n.exc. 1.50m above the starting point complete all as specified and directed.

Earth filling under floor incl spreading and levelling in layers n exc. 25 cm thick , well ramming including watering as required complete all as specified and directed. Note : Earth obtained from excavation shall be used

Material and labour for PCC 1:4:8 type D2 using 40 mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed.

Material and labour for PCC 1:3:6 type C2 using 40 mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed.

Material and labour brick work with sub class ‘B’ brick straight or curved on plan exc 6 mtr mean radius built in cement mortar 1:6 complete all as specified and directed.

Material and labour for half brick work with sub class ‘B’ brick straight or curved on plan to any radius built in cement mortar 1:4 complete all as specified and directed.

M&L for Reinforced cement concrete Design mix (M-25) using 20 mm graded aggregate in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc., basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L RCC Design mix (M-25) using 20 mm graded aggregate in Columns, pillars, piers, posts and struts complete all as specified and directed.

M&L RCC Design mix (M-25) using 20 mm graded aggregate in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M&L RCC Design mix (M-25) using 20 mm graded aggregate in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the likecomplete all as specified and directed.

M&L RCC Design mix (M-25) using 20 mm graded aggregate Chajjas complete all as specified and directed.

Material and labour for formwork to sides of foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work vertical or to batter for rough finished flat surface of concrete complete all as specified and directed.

Material and Labour for Formwork to sides of pillars, posts, struts, piers, columns and stanchion for fair finished flat surfaces of concrete complete all as specified and directed.

Material and Labour for formwork to Formwork to chullah hoods, chajjas, troughs and similar items in cluding edges for fair finished flat surfaces of concrete complete all as specified and directed.

Material and Labour for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work;not exceeding 200mm thick (Horizontal or sloping for fair finished flat surfaces of concrete complete all as specified and directed.

Material and Labour for Formwork to sides and soffits of floor or roof beams, beam haunch ings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. for fair finished flat surfaces of concrete complete all as specified and directed.

Material and Labour for Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete rail ings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizon tal or sloping and similar work exc 10cm but n exc 20cm wide for fair finished flat surfaces of concrete complete all as specified and directed.

Material and labour for mild steel TMT bars 10mm dia and over cut to length bend to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or secruing with clips complete all as specified and directed.

All as per item No. 24 above but 6mm to 8 mm dia complete all as specified and directed

All as per item No. 24 above but 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders etc complete all as specified and directed

S&F rolled mild steel in roof trusses (framed), trussed, purlins, crane gantries, rail and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat section) including distance pieces, cleats etc conforming to Fe 290 (Gde-165) complete all as specified & directed.

M&L for MS framed work such as grills,gratings, framed guard bars etc and similar works confirming to Fe 410-0 or Fe-310-0, complete all as specified and directed.

S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachmen conforming to Fe 410 -W (Gde E- 250) quality A , complete all as specified and directed.

S&F Mild steel screw bolt (machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends each exc 5 cm but n.exc 10 cm long dia 11 to 15 mm complete all as specified and directed.

S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps;hold fasts; wall ties; hooks for hanging fans; and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.

Supply only WPC complete all as specified and directed.

Supply and fix Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Supply and fix Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Chequered cement concrete tiles 20 cm x 20 cm x 25 mm thick, set, jointed and pointed in neat cement slurry in floors . set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15 mm thick screed bed or bedding layers in cement mortar 1:6 including brushing with neat cement slurry with 3 Kg of cement per sqm complete all as specified and directed.

S&F Non Skid ceramic tiles colour 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15 mm thick screed bed or bedding layers in cement mortar 1:6 including brushing with neat cement slurry with 3 Kg of cement per sqm complete all as specified and directed.

All as per item No.36 above but skirting including 10mm thick backing coat in cement mortar 1:4 complete all as specified and directed.

S&F Glazed ceramic colour tiles (450x300 x 7mm thick) on dado & skirting , set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 10 mm thick rendering rough/even & fair in CM 1:4 to receive tile, complete all as specified and directed.

S&F Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror finish polishing complete over & including 20 mm thick screed bed or bedding layers in cement mortar 1:6 including brushing with neat cement slurry with 3 Kg of cement per sqm complete all as specified and directed.

All as per item No. 39 above but skirting including 15 mm thick backing coat in cement mortar 1:4 complete all as specified and directed.

M&L machine pressed precast concrete interlocking paver block coloured (rubber moulded) any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade with proper jointing, pointed with grey cement and pigment over & incl 50 mm thick sand cushioing complete all as specified and directed.

Material and labour for suspended false ceiling using E-grid 2430, 180 GSM (exposed ceiling suspension system ) of grid size 600mmx600 mm with main runner 38 mm x 24 mm and wall angle 24mm x 24mm using 4mm thick High Pressure stean Crude Everest Non Asbestos Fiber Cement plain Board (E-Board Classic) in a grid of GI system duly suspended with 4mm dia GI bar hanger fixed with steel dash fasteners or iron purline from the roof with adjustment clip providing positions for light fixtures,air conditioning diffuser and ducts, sprinkler, smoke detectors etc. The main runners to be secured to structural soffits by hanger @ 1220 mm maximum c/c. the last hanger at the end of each main runner should not be placed at more than 450mm from the adjucent wall, Flush fitting 1220 mm cross tee to be interlocked between main runners @ 610mm c/c, so as to form 600mm x 600 mm grid and painted with two coats of acrylic emulsion paint of approved shed /make over a coat of cement primer before installing it on the grid all as specified and directed.

Supply and fix Pressed steel frames made of 1.25mm thick MS sheet of profile 125x60mm for door frames with one or more rebates including hinges (100/50mm stainless steel),lock strike plate, shock absorber, 20mm dia 60mm long MS conduit for housing of a drop bolt, treating of internal surfaces of chowkhats with coal tar or black paint including hinges, hold fasts/lugs etc complete all as specified and directed.

M&L Plain cement concrete 1:2:4 type B-1, (using 20 mm graded stone aggregate) as in bed blocks, holdfast blocks, coping, lintels upto 1.5m clear span, cills, lin steps, kneelers, bed plates, apex stones kerbs benching , levelling course and similar work including necessary form work complete all as specified and directed.

Supply and fix Steel windows with side hung shutters including box type hinges with steel handles, 2 Nos steel tower bolts 100mm long peg stay complete with glazing bars, dovetailed or welded, including locking arrangements complete all as specified.

All as per item no. 45 above but without glazing bars, complete all as specified and directed.

Supply and fix Steel ventilator with top hung shutter including hinges, steel peg stay, lugs as in hold fast with locking arrangements complete all as specified and directed.

Supply and fix 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

Material and labour for 35 mm thick second class hardwood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.sizes of members of shutters as specified in SSR Part I, Section 8, clause8.24 (a); supplied and fitted to chowkats complete all as specified & directed.

Supply and fix PVC door frame of size 50 mm X 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube complete all as specified & directed.

Supply and fix 30 mm thick factroy made solid panel PVC door shutter (style) consisting of frame made out of MS tube for top and bottom rails MS frame shall be covered with neat moulded plain colour PVC channel having a PVC sheet strip of 20mm width stuct inside the solvent cement for style and single side pre laminated PVC sheet for top rails, lock rails and bottom rails on either side and as gap insert for top rails and bottom rail panelling of plain colour PVC sheet to be fitted in the MS frame welded to the style and rails with suitable PVC sheet beading and jointed together with solvent cement supplying and fixing in the frame at site in clause 8B.2.1of MES Schedule Part-II (2020) complete all as specified & directed.

Supply and fix 100mm stainless steel butt hinges medium weight fixed with stainless steel screws, complete all as specified and directed.

Supply and fix 125 mm long aluminium handle cast type anodised complete all as specified & directed.

Supply and fix 150 mm long aluminum anodised barrel tower bolts of extruded section complete all as specified & directed.

S&F aluminium sliding door bolt, 300 mm, plate type with bright bolt not less than 12 mm dia, with and including a minimum of 6 bolts and nuts four on bolt plate and two on staple plate and fixed complete all as specified and directed.

S&F 150mm size door springs including roller and roller plate complete complete all as specified and directed.

Supply & fix Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm complete all as specified and directed.

S&F 150mm size Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F 3.00 mm thick sheet glass ordinary quality and glazing with oil putting square nexc 0.5 sqm in each pane complete all as specified and directed.

S&F 3.00 mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed.

Material and Labour for broken stone or boulders hardcore of gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface, etc complete all as specified and directed.

S&F GI tube 15 mm bore (ISI Marked) medium grade galvanished with all fittings laid in floors or fixed to wall etc. complete all as specified and directed.

S&F GI tube 20 mm bore (ISI Marked) medium grade galvanished with all fittings laid in floors or fixed to wall etc. complete all as specified and directed.

S&F GI tube 25 mm bore (ISI Marked) medium grade galvanished with all fittings laid in floors or fixed to wall etc. complete all as specified and directed.

S&F Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe e including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets,flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipecomplete all as specified and directed.

Supply and fix, white vitreous china wash basin of size 550 mm x 400 mm,including brackets ,cutting for and pinning in ends of brackets or erecting stand complete all as specified & directed.

Supply and fix 1000 Ltr Rotaional moulded polyethylene water storage tank cylindrical vertical with closed top hoisted and fixed in position,complete all as specified and directed.

Supply and fix 250 Ltr Rotaional moulded polyethylene water storage tank cylindrical vertical with closed top hoisted and fixed in position ,complete all as specified and directed.

Supply and fix 20 mm bore of pipe Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210gms complete all as specified & directed

Supply and fix 25 mm bore of pipe Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe,complete all as specified & directed

Supply only 10 ltrs capacity PVC valveless syphonic action type, low level flushing cistern, white with inlet, ball valve float and handle including brackets and 32 mm dia PVC low or high density flush pipe , complete all as specified & directed.

Supply and fix, 15 mm bore bib tap long body and fancy type, chromium plated, cast copper alloy with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

Supply and fix 15 mm bore pillar tap fancy type, cast copper alloy, with capstan head, chromium plated, screwed down high pressure, with or without letter Hot or Cold with long screwed shanuls and fly nuts, screwed for iron pipe complete all as specified and directed.

Supply and fix, angle stop valve fancy type, cast copper alloy,chromium plated ,screwed down high pressure, with crutch or butterfly handles for 20 mm bore pipe or for unions complete all as specified and directed.

Supply and fix, vitreous china squatting pan of Orrisa pattern size 580mm x 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection making good to floor incl PCC complete all as specified and directed.

S&F Soap dish, vitreous China white, approximate size 160mm x 160mm x 90 mm fixed to plugs with chromium plated brass screw complete all as specified and directed.

S & F PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

Supply and fix 20 mm dia MS chromium plated fancy type curtain rods with brackets, stops, roller etc complete all as specified & directed.

Supply & fix brass CP towel rail 20 mm dia, 60 cm long and and including chromium plated brass screws and wooden/plastic cleat complete all as specified and directed.

Supply & fix CP grating of size 100 mm dia complete all as specified and directed.

Supply & fix PVC (SWR) Pipe 110 mm bore single socketed in any length with rubber ring joints, laid in trenches or in floor complete all as specified and directed.

Supply & fix PVC (SWR) Pipe 75 mm bore single socketed in any length with rubber ring joints, laid in trenches or in floor complete all as specified and directed.

Supply & fix PVC (SWR) Pipe 75 mm bore single socketed in any length with rubber ring joints, fixed to walls with suitable size of clamps & nuts-bolts complete all as specified and directed.

Supply and fix waste pipe for wash hand basin/urinal, complete all as specified & directed.

S&F rolling shutter, without ball bearing including top cover, anchoring rod, hasp and staple and one shop coat of primer, eracted in position as indicated , gear operated type with bevel gear box and crank handle (1mm thick lath), complete all as specified and directed.

Supply & fix Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

Supply & fix 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

Supply and fix PVC (SWR) vent cowl 75mm bore all as specified.

Supply and fix 110 mm bore PVC (SWR) bends of any radius complete all as specified & directed.

Supply and fix 75 mm bore PVC (SWR) bends of any radius complete all as specified & directed.

M & L for Concrete bed in PCC 1:3:6 type C-2 using 40 mm graded stone aggregates to drain pipes for 110mm bore including packing under,and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

Material and labour for providing 100 mm thick plain cement concrete 1:3:6 type C-2 using 40mm graded crushed stone aggregate as in sub base of floor complete all as specified and directed.

Material and labour for providing 40 mm thick plain cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in floor finished even & fiar complete all as specified and directed.

Material and labour for providing 75 mm thick plain cement concrete 1:3:6 type C2 using 40mm graded crushed stone aggregate as in sub base of floor complete all as specified and directed.

Material and labour for providing 75 mm thick plain cement concrete 1:4:8 type D2 using 40mm graded crushed stone aggregate as in sub base of floor complete all as specified and directed.

Material and labour for Providing precast cement concrete 1:2:4 type B1 using 20mm graded stone aggt in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in CM 1:4 complete all as specified and directed.

M&L rendering 15 mm thick cement rendering in two layer each of 10+5 mm thick on fair faces of brick wall or concrete surfaces in CM (1:4) & water proofing compound mixed with second layer @ 3% finishedeven and fair complete all as specified & directed. Note -WPC shall be measured and paid separetly.

M&L rendering 10 mm thick cement rendering on roof slab with WPC in CM (1:3) finished even and fair complete all as specified & directed. Note -WPC shall be measured and paid separetly.

M&L rendering 5 mm thick cement rendering on ceiling in CM (1:3) finished even and fair complete all as specified & directed.

M&L 10mm thick rendering in cement mortar (1:6) on any face of brick walls or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L for 75mm thick cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in plinth protection finished even and smooth without using extra cement laid in panels and joints filled with bituminous mastic filling with 1 part of bitumen and 3 part of sand complete all as specified and directed.

Materials and labour for preparation of new surfaces of wood or wood base materials of any description, over 10 cm width or girth and applying two coat of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

M&L preparation of new steel surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

M & L for preparation of newly plastered surfaces and applying three coats of white wash on ceiling complete all as specified and directed

M & L for preparation of newly plastered surfaces and applying three coats of white wash on surface walls complete all as specified and directed

Material and labour preparation of newly plastered o surfaces of walls and applying two coats of oil bound distemper over one coat of primer over & incl a layer of wall care putty to make the surface even & smooth complete all as specified and directed.

PART-II (E/M WORKS) M&L for Point wiring using 1100 volt grade FRLSH PVC insulated unsheathed multi strand copper conductor cable 1.5 sqmm including 1.5 Sqmm FRLSH PVC insulated unsheathed multi strand 1100 volt grade copper conductor earth wire drawn through and including concealed PVC conduit of appropriate size not less than 20 mm dia and 1.8 mm thick including all fittings viz tees, bends, junctions box , connecting earth including cutting groove for concealed wiring, making good to disturbed surface of wall/floor with cement mortar and finishes to match existing including connection of cable with MCBs or bus bar shall be done through proper size copper/brass thimble of pin/u type etc for one light/fan/bell point complete all as specified and directed.

All as per item No.108 above but for 5 Amps socket Point (Same board), complete all as specified and directed

All as per item No.108 above but for, 5 Amps switch socket outlet Point (Independent board), complete all as specified and directed

All as per item No. 108 above but for one three pin 15 Amps socket outlet on independent board with 1100V grade PVC insulated and unsheathed 4 Sqmm multi strand FRLSh copper conductor cable and PVC insulated and unsheathed copper conductor 4 Sqmm , 1100 volt grade as earth continuity conductor drawn through and including concealed PVC conduit of appropriate size not less than 20 mm dia and 1.8 mm thick including all fittings viz tees, bends, junctions box , connecting earth including cutting groove for concealed wiring, making good to disturbed surface of wall/floor with cement mortar and finishes to match existing including connection of cable with MCBs or bus bar shall be done through proper size copper/brass thimble of pin/u type etc ,complete all as specified and directed.

Supply and fix ceiling rose surface bakelite with three terminals complete all as specified & directed.

S&F switch piano flush type 5 Amp one way complete all as specified and directed.

S&F socket outlet flush type 5 Amp 3/5 Pin complete all as specified and directed.

Supply and fix switch socket outlet 3 pin 5 amp and 6 pin 15 Amps 2 in 1 universal complete all as specified and directed.

Supply and fix ceiling fan regulator socket type, step type, flush type heavy duty suitable to work on 230 volts Ac supply complete all as specified & directed.

Supply and fix lamp Angular holder insulated body with back plate suitable for batten fittings complete all as specified and directed.

Supply and fix ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor BLDC with copper flexible wire from ceiling rose to fan complete all as specified and as directed. Make BAJAJ , Speedster X BBD 1200 mm Ceramic White CF 2690 2410 or equivalent.

Supply and fix plastic body exhaust fan, AC single phase, 240 V of size 250 mm sweep with louvers including necessary connection from ceiling rose , complete all as specified and as directed. Make :-Havells Model No. Ventil Air-DX white or equivalent of BAJAJ/Orient/Crompton/USHA

Supply and fix wall mounted LED batten for fixing upto 22 watt LED tube rod both side connection box type complete all as specified and directed. Make: Crompton, Product Code : ECO Cat No. DEJB12LT8-20 or equivalent make of Philips /Bajaj/Wipro /Syska LED /Havells/M/s Surya Roshni Limited /M/s Jaquar & Company Pvt Ltd

Supply and fix wall mounted LED tube rod 20 watt, pin on both side suitable for fixing upto 22 watt batten complete all as specified and directed. Make:-Crompton ,Model Ultron Cat No. LT8-20-865(2) or equivalent make of Philips /Bajaj/Wipro /Syska LED /Havells/ M/s Surya Roshni Limited /M/s Jaquar & Company Pvt Ltd

supply and fix street / bldg security light LED luminaire 20 watt IP 66 LED lamp, driver etc. including service bracket made out of 40 mm bore GI light grade with suitable size of clamps nutsb bolts with all accessories complete all as specified and directed. Make :- Crompton, Model ASTRO NEO, Cat No. LSTS-20-CDL-M or equivalent make of Philips /Bajaj /Wipro /Syska LED /Havells /M/s Surya Roshni Limited / M/s Jaquar & Company Pvt Ltd

Supply and fix sheet metal enclosure double door powder coated DB SPN with common busbar at incoming end 4 way, including grouting on the wall by means of screws and rawal plugs and making good disturbed surfaces complete all as specified & directed.

Supply and fix sheet metal enclosure double door powder coated DB SPN with common busbar at incoming end 8 way, including grouting on the wall by means of screws and rawal plugs and making good disturbed surfaces complete all as specified & directed.

Supply and fix MCB SP 240 volts, 50 Hz capacity 10KA,6-32 Amps complete all as specified & directed.

Supply and fix MCB SPN 240 volts, 50 Hz of capacity 10KA, 40 Amps complete all as specified & directed.

Material and labour for laying of bricks locally available sub-class 'B' brick (old size) for cable protection cover laid flat and dry in trenches over the cable perpendicular to the directon of cable complete all as specified and directed.

Supply and spread dry fine sand in trenches as sand cushioning to under ground cable for protection with fine river sand and provide reqd cover after punning down complete all as specified and directed. Note:- Thickness of sand cushion after punning down will be measured and paid separately.

Supply, fixing, commioning & testing of XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, Electric power cable (heavy duty) with aluminium conductors, 1100 volts, grade cross sectional area 16 Sqmm 4 core laid in trenches/fixed to wall/under road/pipe etc including copper cable glands & copper thimbles complete all as specified and directed.

Supply, fixing, commioning & testing of XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, Electric power cable (heavy duty) with aluminium conductors, 1100 volts, grade cross sectional area 10 Sqmm 4 core laid in trenches/fixed to wall/under road/pipe etc including copper cable glands & copper thimbles complete all as specified and directed.

Material & labour GI tube light grade 40 mm bore for protection of UG cable, complete all as specified and directed.

M & L Earthing complete with galvanized steel earth plate electrode 60cmx 60cm x 6 mm buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanized earth lead wire 4 mm dia by means of galvanized iron or steel bolts, nuts, check nuts and washers, and connected to equipments as directed, including funnel with GI med grade watering pipe 20 mm bore, wire mesh, charcoal or coke and common salt in alternate layers of 15 cm compacted thickness all around the earth electrode, with concrete pit in PCC 1:3:6 type C1, 50 mm thick pre cast RCC 1:2:4 type B1 cover slab reinforced with 8 mm dia deformed bar 15 cm C/C and suitable handle of 10 mm dia round bar, 15mm bore medium grade protection pipe upto 7.5 m for earth lead protection including necessary excavation earth work in soft/loose soil and disposal of spoil to a distance not exceeding 50 m and necessary testing complete all as shown on electrical plate No. 3 of MES Schedule 2009, Part-I complete all as specified and directed.

Bhuiya Construction

Younus Khan

M/S P K ROY AND SONS

m/s builders and suppliers

Bidder Name

Bhuiya Construction