SETTING UP OF SPORTS INFRASTRUCTURE (PT COMPLEX STAGE II) AS PART OF INFRASTRUCTURE AUGMENTATION (PHASE II) AT INA EZHIMALA

Amount

Total amount of Sch 'A' part-I ( Buildings/Structures)

Total amount of Sch 'A' part-II (Excavation, earthwork,Site clearance & Develoment)

Total amount of Sch 'A' part-III (Internal Electric Supply)

Total amount of Sch 'A' part-IV (Internal Water Supply)

Total amount of Sch 'A' part-V (External Water Supply)

Total amount of Sch 'A' part-VI ( External Electric Supply)

Total amount of Sch 'A' part-VII ( Hardstanding)

Total amount of Sch 'A' part-VIII(Sewage Disposal)

Total amount of Sch 'A' part-IX (Area Drainage)

SCH. 'A' PART -X (MISCELLANEOUS) Note :- This schedule is not pre priced by MES and the pre priced rate indicated as "Rs. 0.00" under Col.5 signifies this fact only.

Point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits), with multi-stranded copper conductor 1.5 Sq. mm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLS cable 1100 volts grade, ISI-694 marked with valid CML No. with and including non metalic regid PVC concealed conduit medium duty and conduit accessories concealed in wall/roof/floor etc, ISI marked with valid CML No.(IS-9537-1983 for conduits and IS:3419:1976 for conduit accessories), with galvanised modular mild steel/pressed steel sunken boxes (with earth dolly) duly electroplated, covered with modular frame and base plate for fixing of modular switches, sockets and fan regulators etc, including on run of PVC insulated multi-stranded copper conductor 1.5 Sqmm nominal cross sectional area single core F.R.L.S. cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed at site for the following:- Note: (i) Switches, sockets, regulators to be measured and paid for separately. (ii) Empty places shall be covered with blank plates.

All as per item No. 11 but for One light point controlled by one 5/6 amps one way switch complete all as specified and directed.

All as per item No. 11 but for One fan point controlled by one 5/6 amps one way switch complete all as specified and directed.

One Socket outlet, three/five pin, 5 Amp, independent controlled by one 5/6 amps one way switch or switch/socket combination 5 amps, 5 pin complete all as specified and directed.

One Socket outlet, three/five pin, 5 Amp, controlled by by one 5/6 amps one way switch or switch/socket combination 5 amps, 5 pin. on the same board with other switches, sockets, fan regulators etc complete all as specified and directed.

Point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits), with multi-stranded copper conductor 4 Sq. mm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLS cable 1100 volts grade, ISI-694 marked with valid CML No. with and including non metalic regid PVC concealed conduit medium duty and conduit accessories concealed in wall/roof/floor etc, ISI marked with valid CML No.(IS-9537-1983 for conduits and IS:3419:1976 for conduit accessories), with galvanised modular mild steel/pressed steel sunken boxes (with earth dolly) duly electroplated, covered with modular frame and base plate for fixing of modular switches and sockets etc, including on run of PVC insulated multi-stranded copper conductor 4 Sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed at site for the one 3/5 pin 15/16 amps socket outlet independent board:- (NOTE: Switch and socket to be measured and paid for separately)

Modular switch 6 Amps one way 230 volts 1 module 50Hz ISI Marked complete all as specified and directed.

Modular switch 16 Amps one way 230 volts 1 module 50 Hz ISI Marked complete all as specified and directed.

Modular socket 6 Amps 2 module 230 volts 50 Hz ISI marked complete all as specified and directed.

Modular socket 16 Amps 2 module 230 volts 50 Hz ISI marked complete all as specified and directed.

Ceiling rose three terminal 230 volts 50 Hz ISI marked complete all as specified and directed.

Step type in 5 stages fan speed regulator 2 module 230 volts 50 Hz ISI marked complete all as specified and directed.

Double door MCB DB SPN 8 way complete with and including 200 amps rated busbar nad separate link for neutral complete all as specified and directed.

MCB 2 pole 32 Amps10 kA 230 Volt 50 Hz with characteristics curve "C" (ISI marked ) complete all as specified and directed.

MCB single pole 6 to 32 Amps 10 kA 230 Volt 50 Hz with characteristics curve "B" (ISI marked ) complete all as specified and directed.

Decorative ultra slim linear 20W 4 feet LED lighting fixture with extruded aluminium heat enviormental friendly, energy efficient prewired with lamp , AC 230V ISI marked completed all as specified and directed. Make : Crompton Cat Part No. DIJB12LT8ECO or equivalent make listed in list of manufactures.

Street light 25 W LED made out of pressure die cast aluminium housing and lens embedded PC cover top opening seperate driver compartment with IP66 protection, fixed on wall with GI pipe 40mm dia 1.5 Mtr long bend in to shape with GI bracket , nut and bolts, and 3 core 1.5 sqmm round flexible connection wire complete including LED lamp complete all as specified and directed. Make Crompton Model LSTS-25-CDL-M ASTRA NEO or equivalent make listed in list of manufactures.

Surface and wall mounted 10w LED battern , extruded alluminium housing provided for efficient heat desipation with poly carbonate diffusser and intregrated electronic driver with and including fittings, fixing acessories LED lamp complet of make Crompton Cat Part No. DMLN1LT8-8 UNILITE with and including lamp or equivalent make listed in list of manufactures.

Ceiling fan 1200 mm sweep copper wounded 230 V 50 Hz BEE 5star rating ISI marked complete all as specified and directed.

Exhaust fans AC single phase 230 /240 V of size 250 mm copper wound, PVC body, self opening louvers complete, complete all as specified and directed Crompton Model Brisk Air white or equivalent make listed in list of manufactures.

Sub main wiring with 2 runs of 2.5Sqmm PVC insulated copper conductor multistranded cable drawn in and including PVC conduit including one run of 2.5 Sqmm multi stranded copper conductor cable for earth condinuity wire (for security light) Note : Two runs of PVC cable 2.5 sqmm and one run of 2.5 mm earth condinuity conductor cable as earth continuity wire and pvc conduit will be measured as one unit length.

INTERNAL WATER SUPPLY Chromium plated 15mm bore stop cock angular and wall flange comple of make Jaguar cat apart No CQT-23059 complete or equivalent make listed in list of manufactures all as specified and directed.

Chromium plated hand shower (Health Faucet) brass body with 8mm dia, 1 Mtr long flexible tube & wall hook,complete all as specified and directed. Make: Model ALD-573 of Jaguar or equivalent manufactures mentioned in list of manufactures

Chromium plated bip taps 15mmm bore with wall flange complete of make jaguar cat part no CQT-23037 complete or equivalent make listed in list of manufactures all as specified and directed.

15mm bore, 450mm long PVC connection with brass nuts complete all as specified and directed.

Pillar taps fancy type 15 mm Dia , cast copper alloy, with capstan heads, chromium plated ,screwed down high pressure, with long screwed shanks and fly-nuts, screwed for CPVC pipe and fixed for WHB complete all as specified and directed. Make Jaquar (Model-CQT-23021) or equivalent manufactures mentioned in list of manufactures

HARDSTANDING Basketball Pole made of 8” dia pipe with 2.2 meter projection & basketball board Acrylic size 180cm x 105cm with 25 mm thick board & dunking ring, net, frame (BB.8.2.2.25) complete all as specified and directed.- Make: TRENZ Brand

Painting lines, dashes, arrows, letters, etc. or roads, pavements and the like n exc 10cm wide with roads marking paint, white or golden yellow complete all as specified and directed.

GI pipe 100mm dia medium grade for Volley ball court including necessary pullies, hooks etc. all as per international standards complete all as specified and directed.

MS screw bolts 20mm(machine made)hexagonal or square head at on end and screwewd the other or screw both ends to be fixed with washer and one hexagonal or squared nut exc 22.5CM length and n exc 30cm long complete all as specified and directed.

EXTERNAL ELECTRIFICATION Pre cast concrete cable cover Class LV, Type I, flat, size 250mm x 150mm x 40mm for protection of cable complete all as specified and directed.

Earth cushioning to UG cable using sieve to separate the composite particle/roots etc and refilling in trenches before laying of cable 8cm and after laying of cable 15cm as sand cushioning all as directed. complete all as specified and directed.

GI tubing of 50mm bore light grade laid in trenches/on floors/walls/across drains for protection of UG cable complete all as specified and directed.

XLPE cable insulated, screened PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 3.5 core 70 sqmm.(street lights) complete all as specified and directed.

XLPE cable insulated, screened PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 2 core 16 sqmm.(street lights) complete all as specified and as directed

XLPE cable insulated, screened PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 2 core 06 sqmm.(street lights) complete all as specified and directed.

Steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-64 (12.0 metres long) complete all as specified and directed.

Earthing complete with galvanised steel earth plate electrode of size 600mm x600mmx6.0 mm thick burried directly under ground vertically to a depth not less than 2.25 meter below ground level with top edge of the plate at a depth not less than 1.5 m below ground level connected to and including galvanised strip 32 x 6mm, by means of bolts, nuts, check nuts and washeres made out of GI including protection pipe GI light grade 40 mm size and watering pipe 20 mm dia GI medium grade all as shown on plate No 3 of SSR Part-I, connecting to earthing test point, including necessary earth work in any type of soil, PCC earth chamber made in PCC 1:3:6 type C1 (using 20mm graded aggregate), common salt, charcoal, CI funnel, earth pit cover in RCC 1:2:4 type B1 (using 20mm graded aggregates), with 8mm CTD bars @ 140mm c/c in both ways, including necessary form work complete including necessry test on completion all as specified and as directed.

Junction box made out of polycarbonate for loop in /out with all fixing arrangement on pole with one MCB sp 6A for led light including 7meter 1.5 sqmm 2 core flxible cables complete all as specified and directed.

Outdoor type floor mounted MCB DB TP&N 4 WAY shall be made of Polycarbonate thermoplastic enclosure . the enclosure shall be environmental friendly recylable UV resistant , halogen panel board The board/panel shall be made out of modular Polycarbonate thermoplastic enclosures. The enclosure shall be environment friendly, recyclable, UV resistant, halogen & silicon free, anti acid & anti corrosive, fixed on with anchor fasterners , cirular holes at bottom/top to recieve incoming and out going cables, lugs and glands of sizes as required suitable for 3 phase 50 cycle 415 volts and comprising the following :- (a) Bus bar of aluminium strip of suitable cross section to with stand 200 Amps rating 3 phase and half of the capacity for neutral mounted on Epoxy/FRP bus bar insulator and colur coding (b) MCB 32 Amps 4 pole breaking capacity16 KA -01 No(In coming) (c) MCB SP 06 Amps 10 KA -34 Nos (Out Going) (d) Phase indicating lamps RYB LED type - 01 set

Earthing complete with galvanised steel earth plate electrode of size 600mm x600mmx6.0 mm thick burried directly under ground vertically to a depth not less than 2.25 meter below ground level with top edge of the plate at a depth not less than 1.5 m below ground level connected to and including galvanised wire 4 mm, by means of bolts, nuts, check nuts and washeres made out of GI including protection pipe GI light grade 20 mm size and watering pipe 20 mm dia GI medium grade all as shown on plate No 3 of SSR Part-I, connecting to earthing test point, including necessary earth work in any type of soil, PCC earth chamber made in PCC 1:3:6 type C1 (using 20mm graded aggregate), common salt, charcoal, CI funnel, earth pit cover in RCC 1:2:4 type B1 (using 20mm graded aggregates), with 8mm CTD bars @ 140mm c/c in both ways, including necessary form work complete including necessry test on completion all as specified and as directed.

LED flood light fitting 120 W die cast aluminium housing 115lumen/watt light output, 5KV surge protection, power factor 0.95 THD less than 10%, IP65 protection and heat resisitant toughened glass with frame including all accessories and suitable bracket and complete fixture and accessories fixed on poles including mounting clamps and connection and tesing on completion complete all as specified and directed. Make:CG model No LFLN-120-CDL/60 or equivalent makes in listed in list of manufactures

SEWAGE DISPOSAL 150mm internal dia DWCPE pipe laid and jointed complete with collars complete all as specified and as directed

EXTERNAL WATER SUPPLY Cutting and jointing existing 40mm bore GI pipe line by fixing reducer Tee of size 40X40X25mm including necessary earthwork complete all as specified and directed.

EXCAVATION, EARTHWORK, SITE CLEARANCE & DEVELOPMENT Crushing the soil to size 2.36mm to 4.75mm using mechanical machine, free from pebbles and vegetation and other waste complete laying over volly ball court 40cm thickness all as specified and as directed. Note:- (i) The quantity shall be measured and paid for consolidated thickness. (ii) Soil of size 2.36mm to 4.75mm segregated using mechanical flat-bed sieve or by manual seive.

M/S V B MOHAMMED ALI

CREATIVE BUILDERS