GE/KHU-32/2025-26 PROVN OF PARKING SHED FOR 4XALS (02 NOS SHED) AND PROVN OF 01X BATHROOM AND 02X TOILET WITH ALLIED SERVICES ADJACENT TO T-36 BLDG OF DIV CAMP IN THE AOR OF AGE B/R-1 UNDER GE KHUMBATHANG

Amount

S& F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/including rain guard cladding to wall,fixed with self tapping screws as specified..

S& F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc

M&L for two coat of synthetic enamel paint (ordinary tint) to the new steel surfaces having shop coat primer red oxide (zinc chrome) over 10 cm in width or girth not otherwise described complete all as specified and directed.

M& L for Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out hard /dense soil

M& L for excavating over areas, n exc 1.5 m deep and getting out hard /dense soil

Returning, filling including spreading leveling watering and well ramming in layers n. exc 25 cm in hard dense soil complete all as directed.

Removing excavated soil to a distance n. exc 50 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as directed.

M&L PCC 1:4:8 (Type D2) using 40 mm graded stone aggregate as in foundation filling and mass concrete.

M& L pre-cast cement concrete block(1:3:6) type C1 ( using 20 mm graded aggregate ) masonry with solid blocks, exc. 10 cm in width and setting in1:6 cement mortar, complete

M& L pre-cast cement concrete block(1:3:6) type C1 ( using 20 mm graded aggregate ) masonry with solid blocks, exc. 10 cm in width and setting in1:6 cement mortar, complete

M & L for Rendering 15mm thick on brick or concrete surface or other than fair faces of brick work on wall in CM 1:4 surface finished even and smooth w/o extra cement

M & L for Rendering 15mm thick on brick/stone masonery or other than fair faces of brick work on wall in CM 1:6 surface finished even and smooth w/o extra cement

M&L for preparing new plastered surfaces of walls and applying two coat of cement based paint over a coat of primer complete all as specified

M&L for preparation of new plaster surfaces of walls and applying two coat of oil bound distemper over a coat of primer complete all as specified

M&L for TMT bars10mm dia and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with theincluding mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified and direceted.

Ditto all as per Item no-6 above but 5mm dia and over upto and including 10 mm dia complete all as specified & directed.

M& L for Rcc 1:2:4 type B1 (20 mm graded stone aggregate ) nominal mix Beams, roof beam, cantilevers, bressumm?ers, lintels over 1.5m span

M&LUse and waste of formwork to rough finished flat surfaces of concrete foundations, footings , bases of coulmns, rafts and raft beams, sides and soffits (if any) of foundation and plinth beams ; and other similar works; vertica or to batter complete all as specified and directed.

M&L for Hard core, broken boulders/ stone to gauge n exc 63 m complete all as specified and directed.

M&L 75 mm PCC 1:3:6 type C1 using 20 mm graded stone aggregate as in plinth protection finished even and smooth without using extra cement including necessary complete all as specified and directed.

M&L 100 mm PCC 1:4:8 type D2 using 20 mm graded stone aggregate as in as in sub sase complete all as specified and directed.

Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S& F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification & drawing

Supply & fix 75 mm size butt hinges, heavy weight, cold rolled mild steel complete all as specified and directed.

Supply & fix 150 mm length aluminium anodised barrel tower bolt extruded section complete all as specified and directed.

Supply & fix 150 mm long aluminium handles, cast type, anodised complete all as specified and directed.

Supply & fix 250 mm long aluminium alloy, anodised sliding door bolt with haps, staple(bolt type) and fixing clip of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.

S & F GI tubing medium grade with all fitting 15 mm bore fixed to wall or concealed or fitted to ceiling or laid under floor

S & F GI tubing medium grade with all fitting 20 mm bore fixed to wall or concealed or fitted to ceiling or laid under floor

Supply & fixed 15 mm bore stop valve cast copper alloy screwed down high pressure with crutch or butterfly handle screwed for iron pipe or for union fixed complete all as specified

Supply & fixed in repairs 20 mm bore stop valve cast copper alloy screwed down high pressure with crutch or butterfly handle screwed for iron pipe or for union fixed complete all as specified

Supply & fixed 15mm bore cast copper alloy CP bib tap fancy type screwed down for iron

Supply & fixed 15mm bore CP stop cock /angle cock fancy type screwed down with iron pipe or for union fixed complete .

Supply & fixed 15mm bore CP pillar tap high nack fancy type , screwed down high pressure with or without 'Hot' or ' Cold' with long screwed shank and fly nuts screwed for iron pipe fancy type

S&F 10 litre capacity PVC low level flushing cistern with all accessories complete fixed with WC including syphone pipe, PVC flushing pipe of size complete all as specified and directed.

Supply & fixed PVC connection 15mm x 450mm size with PTMT nuts.

Supply & fixed as in Water storage tanks 1000 litres capacity, rotational moulded, triple layer polythene (cylindrical vertical with closed top) hoisting and fixed in position on roofs including complete all as specified.

S/F in Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule20mm

Sheet Glass shelf assembly consisting of 5.5 mm thick shhet glass shelf 12 cm wide with chromium plated bracket guard and raling 60 cm long

S&F corner glass shelf large 300mm x 300mm complete all as specified. Make - CERA Cat Part No CA F5005103 or equivalent .

S &F Tubular towel rail 20mm dia 600mm long of brass chromium plated fixed with brackets and including chromium plated brass screws and wooden/plastic cleats complete all as specified.

Wash hand basin, flat back 550x400mm vitreous china (white) including chromium plated waste fittings 32mm bore size, waste pipe, PVC, 32mm bore, angle iron/cast iron brackets of required size as directed & making good disturbed surfaces to match complete all as specified.

S&F Vitreous China `pedesatl pattern (EWC) white in colour with and including plastic seat cover white closed pattern with flat bottom and cover and MS chromium palted hinging device including connecton to uotgoing pipe complete all as specified and directed by Engr - In - charge . , size 580 x440 mm white, with integral foot rests (excluding flushing cistern ), all as specified.

Supply & Fixing vitreous China squatting pan, ' Orissa patteren, size 580 x 440 mm white, with integral footrests including trap but (excluding flushing cisteren and flush pipe) complete all as specified and directed.

M&L 75 mm dia PVC(SWR) multi floor trap with grating including jointing with solvent cement complete all as specified and directed.

S & F PVC Grating doom 100 mm dia (Min Weight 40 gms)

S & F PVC Grating doom 125 mm dia with waste hole of PTMT (Min Weight 40 gms)

S& F PVC (SWR) 100/110 mm pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors

S& F PVC (SWR) 75 mm pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S & F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wallwith stack clamps of 75 mm complete

S/F PVC cowls 75 mm complete all as specified and directed.

S/fixed PVC (SWR) Bends 100/110mm bore, complete all as specified and directed.

S/fixed in repair PVC (SWR) Bends 75 mm bore,

S&F PVC(SWR) 75 mm bore branch piece,single y equal or unequal provided .

S&F PVC(SWR) 110 mm bore branch piece,double y equal or unequal provided

S&F PVC(SWR) 110 mm bore reducers

M&L Non Skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match

M&L Screed bed or bedding layer of mortar 15 mm thick in (1:6) for laying floor finishes like tiles etc complete all as specified and directed.

M&L glazed tiles coloured ceramic tiles 300x450x7mm thick in vertical surfaces such as skirting and dados set and jointed in neat cement slurry pointed in coloured cement to match including rendering 10 mm thick on fair faces of brick work/concrete surface in CM (1:4) complete all as specified and directed.

M&L concrete bed to drain pipe incl packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C-2 using 40 mm grded crushed stone agg for 100 mm bore pipe all as specified.

M&L for pre cast cement concrete 1:2:4, type B-1, using 20mm graded stone aggregate as in cover slabs (for manholes etc) and similar articles with plain faces, set in CM 1:4 complete all as specified and directed.

M&L for cement concrete 1:2:4, type B-2, using 20mm graded stone aggregate as benching , surface channel and similar articles finishing even and smooth using extra cement complete all as specified and directed.

M&L 5.0 mm thicktinted glass packing with rubber gasket, Al beading etc around both sides for fixing of glass all as specified and directed.

M&L 5.0 mm thicktinted wired glass packing with rubber gasket, Al beading etc around both sides for fixing of glass all as specified and directed.

S& F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows,louverde ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge

M&L construction of Soakage Well of size 3.6M dia X 3.00 M effective depth with sub class 'B' bricks and RCC M-25 Design Mix (using 20 mm graded stone aggregate) as in cover slab etc. including all required earthwork in soft/loose soil, returning filing and removal etc and filling of brick bats and cement concrete etc. complete all as shown on CELZ drawing No. TD/576 sheet 1/2 & 2/2 complete all as specified.

M& L for 9 mm thick Prelaminated particle board, interior grade, prelaminated one side with ecorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work

M & L fo 2nd class hard wood timber scantling plain fillets. square, rectangular or triangular in section area exc 13 sqcm not exc25 sqcm , clean sawn, secured with nails or brads complete.

M & L fo 2nd class hard wood timber scantling plain fillets. square, rectangular or triangular in section area exc 3 sqcm not exc 6 sqcm , clean sawn, secured with nails or brads complete.

M & L fo 2nd class hard wood timber scantling plain fillets. square, rectangular or triangular in section area notb exc 3 sqcm , clean sawn, secured with nails or brads complete.

M/L 75mm thick cement concrete type D-2, 1:4:8 as in sub base all as directed.

M & L machine pressed rubber moulded precast concrete inter locking paver block any shape and size conforming to IS 15658-2006 of 80 mm thickness M-40 grade, with grey cement & pigment complete

M& L for 25mm thick sand layer for bottom of interlocking tiles and fillsed joints at top. Comcplete ass as specified.

S& F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

M& L Providing, cement concrete type B0-1:2:4 in roof kerbs or mud stops, rounded or chamfered on edges Comcplete ass as specified.

S& F Pre-painted galvalume aluminum zinc coating GI based Plain steel heet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Surface excavation exc 30 cm deep and averaging 15cm deep and getting out in any type of soil.

Excavation in post holes each n.exc 0.50 cum getting out. Returning filling in layers n.exc 25cm etc removal at surplus soil to a distance n.exc 50 mt and making good surface in hard/ dense soil

M&L Plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) laid in base, mass concrete all as specified and directed by Engineer In charge.

M&L hard core of broken stone of gauge 63mm but n.exc 150 mm deposited 15cm thickness spread and leveled in layers ,water and rammed true surfacein plinth protection/ hard standing all as directed by Engineer-in-charge.

M&L for 100 mm thick PCC type D-2, 1:4:8 (40mm graded stone aggregate) laid in floor, sub base complete all as specified and directed

M&L for 100 mm thick PCC 1:2:4 type B-1, as in paving (20 mm graded stone aggregate) finished even and smooth with out using extra cement etc complete all as specified and directed.

S&F Steel work as in tubular trusses including special shaped washers etc, complete using ERW or induction butt welded tubes conforming to IS 1161-1998 grade St 240 complete all as specified.

S&F Pre- painted galvalume aluminum zinc coating GI based trapazoidal steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified.

Forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’ complete all as specified and directed.

Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound grade 'A' complete all as specified and directed.

E/M Portion

Material and labour for point wiring with 1.5 sqmm cable FRLS PVC insulated, unsheathed copper multistranded conductor, 1100 V grade of size 1.5 sqmm including necessary termination board 1.5 Sqmm PVC insulated unsheathed FRLS copper conductor as earthing and connected to common earthing with PVC heavy duty casing caping/PVC conduit ISI marked as rquired at site along with all accessories and making good the disturbed surfaces of wall/ ceiling etc for the following : -

(a) One light point/ one fan point/ Bell Point controlled by one switch

(b) One 3 pin socket outlet, 5 Amp independent board.

M&L for Ceiling rose 3 plates flush type 6 Amps,250 volts AC ISI marked

Supply in repair switch piano flush type single pole one way 5 Amps all as specified

All as per item No 2 above but for point wiring for power point with 2.5 Sqmm FRLS PVC insulated unsheathed copper cable 1100 Volt grade drawn through and including PVC casing caping heavy duty ISI marked /heavy duty conduit ISI marked as required at site alongwith accessories with 2.5 Sq mm FRLS PVC insulated unsheathed copper conductor cable as earthing and connected to common earth all as specified.

Supply & Fixing switch socket combination multi purpose, 5 amp all as specified

S & F in repair switch socket combination switch socket outlet 3 pin, 16 amp flush type

S & F pressed sheet metal enclosure (MCB DB) single door,single pole and neutral 240 Volt with 200 Amps rated bus bar complete for 04 way complete all as specified and directed.

Supply and fix for miniature Circuit breaker (MCB) single pole and current carrying caoacity 5 to 32 Amp 240 volt 'C' curve 10 KA in the MCB DB with connection testing and commissioning complete all as specified and directed.

Supply and fix for miniature Circuit breaker (MCB) single pole & neutral 240 volt 'C' curve 10 KA 32 Amps capacity IP 20 in the MCB DB with connection testing and commissioning complete all as specified and directed.

S&F wall mounted LED light fitting 1x20 watts AC decorative box type with driver holder including LED tube light , energy efficient type 4 feet long including neccessary conection prewired and making connection with 3 core copper flexible cable of appropriate size from ceilling rose.

S & F exhaust fan, steel body AC single phase, 230 volt of size 300 mm sweep with blades and frame and louvers connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed

Excavation in trenches not exc 1.5 m wide and not exc 1.5 m in depth and getting it out for laying of cable / pole etc in hard/dense soil all as specified.

Returning, filling in, including spreading, leveling watering, and well ramming in layers not exc 25 cm in hard/dense soil all as directed.

Removing excavated material n.exc 50m and depositing where directed at a level exc. 1.5 cm above the starting point all as directed.

M&L for stone dust sand cushioning to UG cable laid in trenches all as specified and directed.

Supplying and laying unreinforced precast concrete cable cover, class HV, type 1 flat of size 250mm x150mm x 40mm placed perpendicular of the cable complete.

Supply laying and testing cable XLPE insulated screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables heavy duty 1100 volts grade with stranded aluminium conductor of size 10 sqmm 2 core.

Material and labour earthing complete with galvanized steel earth plate 60 cm x 60cm x 6.0mm thick buried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of the earth plate at a depth not less less than 1.5 mtr filled around with 15 cm thick alternate layers of charcoal dust and salt and connected to earth lead wire 4mm dia (8 SWG) by means of bolt, nut and check nuts and washers of galvanized iron or steel and thimble and other ends of the earth wire connected to main switch board and protected by galvanized iron pipe light grade 15mm bore and watering pipe 20mm dia light grade with funnel and wire mesh, pcc 1:3:6 type C-1 in chambers RCC 1:2:4 type B-1 in pit cover reinforced with 8 mm dia deformed bars 15cm center to center both ways all as directed by Engr-In-Charge, complete all as shown in electric plate No 3 of MES SSR Part I

Supply and fix in repair sheet metal enclosure SPN DB 02 way,single phase 240 volts double door with 200 amp rated bus bar complete all as directed.

Supply and fix sheet metal enclosure SPN DB 08 way,single phase 240 volts double door with 200 amp rated bus bar complete all as directed.

Supply and fix for miniature Circuit breaker (MCB) single pole & neutral 240 volt 'C' curve 10 KA 32 Amps capacity IP 20 in the MCB DB with connection testing and commissioning complete all as specified and directed.

Supply and fix for miniature Circuit breaker (MCB) triple pole & neutral 415 volt 'C' curve 10 KA, 63 Amps capacity IP 20 in the MCB DB with connection testing and commissioning complete all as specified and directed.

S&F LED security light fitting 35 watts 230 volts AC outdoor type with high pressure die cast aluminium housing and heat resistant complete with driver,lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.

S&F in repair two single core 6 sqmm for sub Main wiring with copper conductor multistranded PVC insulated and unsheathed 1100 Volts grade in and including PVC casing capping with fixing accessories including one run of 6 Sq mm copper conductor. (Note - Two runs of 06 Sq mm cable, one run of 6 Sq mm earth cable and one run of PVC casing Capping shall be measured as one running meter.)

S&F in repair two single core 2.5 sqmm for sub Main wiring with copper conductor multistranded PVC insulated and unsheathed 1100 Volts grade in and including PVC casing capping with fixing accessories including one run of 2.5 Sq mm copper conductor. (Note - Two runs of 2.5 Sq mm cable, one run of 2.5 Sq mm earth cable and one run of PVC casing Capping shall be measured as one running meter.)

Deduct Credit for Demolished/Dismantled material Rs (-) 0.00 (Minus) as listed in Schedule 'A' Sec-II (Credit Schedule) Note : Tenderers will not quote against this item being a tentative amount, to be considered to arrive at the 'Contract Sum'.

M/S SK TRADERS (BID ID -3313888)

M/S M A ENTERPRISES (BID ID -3314887)

M/S MOHD HUSSAIN (BID ID -3315182)

M/S ALI MOHD AND SONS (BID ID -3313788)

M/S MOHD KHAN (BID ID -3313843)

KASHMIR FAIR DEAL SERVICES (BID ID -3314838)