CA NO. CWE /HILLS /PGH/41 OF 2021-2022 REPAIR/ MAINTENANCE OF DG SET AT MIL STN PITHORAGARH UNDER GE PITHORAGARH

Amount

Maintenance and complete servicing of existing DG Set of capacity 320 KVA including replacement of filters, dis -assembling of operating mechanism / parts, well cleaning with chemicals, replacing unserviceable parts / accessories, oiling/ greasing of complete moving parts, calibration and resetting of governor by the rep of reputed manufacturer, cleaning of injector nozzle, cleaning/descaling of radiator assembly with cleaning agent, removal of all deposited materials including oiling / greasing of exhaust fan & bearing etc. including re - assembling the DG set after replacing the unserviceable parts and components etc. and making DG Set in perfect operational in manual and electrical mode, complete all as directed including testing of DG Set at full load. Note:- (i) Spare parts will be measured and paid separately under respective items of Sch 'A'. (ii) Make of parts shall be same as per existing make.

Supply only the following spare part of of existing make & size, suitable for DG Set 320 KVA, SM No. 504/6005-DG/03, complete in all respect & directed. :- Rubber hose pipes with fixing clamps

Lubrication oil filter

Fuel filters

By Pass filters (as per sample), Make-Cumins

Fuel pipe duly covered with supper fine steel wire with coupling, nut and bolts.

Fan belt (as per sample)

Engine gasket.

Lubrication Oil

Air filter

Replacement of Hose: Air Cleaner.

Replacement of Gasket: oil filter

Replacement of Gasket: O -Ring

Replacement of Ring: Seal

Replacement of asbestos rope of size 20 mm.

Maintenance and complete servicing of existing DG Set of capacity 30/20 KVA including replacement of filters, dis-assembling of operating mechanism / parts, well cleaning with chemicals, replacing unserviceable parts / accessories, oiling / greasing of complete moving parts, calibration and resetting of governor by the rep of reputed manufacturer, cleaning of injector nozzle, cleaning/descaling of radiator assembly with cleaning agent, removal of all deposited materials including oiling / greasing of exhaust fan & bearing etc. including re - assembling the DG set after replacing the unserviceable parts and components etc. and making DG Set in perfect operational in manual and electrical mode, complete all as directed including testing of DG Set at full load. Note:- (i) Spare parts will be measured and paid separately under respective items of Sch 'A'. (ii) Make of parts shall be same as per existing make.

Supply only the following spare part of existing make & size, suitable for DG Set 30/20 KVA complete in all respect & as directed. :- Rubber hose pipes with fixing clamps

Lubrication oil filter

Fuel filters

By Pass filters (as per sample)

Fuel pipe duly covered with supper fine steel wire with coupling, nut and bolts.

Engine gasket.

Lubrication Oil

Air filter

Replacement of Hose: Air Cleaner.

Replacement of Gasket: oil filter

Maintenance and complete servicing of existing DG Set of capacity 200 KVA including replacement of filters, dis-assembling of operating mechanism / parts, well cleaning with chemicals, replacing unserviceable parts / accessories, oiling / greasing of complete moving parts, calibration and resetting of governor by the rep of reputed manufacturer, cleaning of injector nozzle, cleaning/descaling of radiator assembly with cleaning agent, removal of all deposited materials including oiling / greasing of exhaust fan & bearing etc. including re - assembling the DG set after replacing the unserviceable parts and components etc. and making DG Set in perfect operational in manual and electrical mode, complete all as directed. Note:- (i) Spare parts will be measured and paid separately under respective items of Sch 'A'. (ii) Make of parts shall be same as per existing make

Supply only the following spare part of existing make & size, suitable for DG Set 200 KVA complete in all respect & as directed. :- Rubber hose pipes with fixing clamps

Lubrication oil filter

Fuel filters

By Pass filters (as per sample)

Fuel pipe duly covered with supper fine steel wire with coupling , nut and bolts.

Fan belt (as per sample)

Engine gasket.

Lubrication Oil

Air filter

Replacement of Hose: Air Cleaner.

Replacement of Gasket: oil filter

Maintenance and complete servicing of existing DG Set of capacity 125 KVA including replacement of filters,dis -assembling of operating mechanism / parts, well cleaning with chemicals, replacing unserviceable parts / assessories, oiling/ greasing of complete moving parts, calibration and resetting of governer by the rep of reputed manufacturer, cleaning of injector nozzle, cleaning/descaling of radiator assembly with cleaning agent, removal of all deposited materials including oiling / greasing of exhaust fan & bearing etc. including re - assembling the DG set after replacing the unserviceable parts and components etc. and making DG Set in perfect operational in manual and electrical mode, complete all as directed including testing of DG Set at full load. Note:- (i) Spare parts will be measured and paid seperately under respective items of Sch 'A'. (ii) Make of parts shall be same as per existing make.

Supply only the following spare part of existing make & size, suitable for DG Set 125 KVA complete in all respect & as directed. :- Rubber hose pipes with fixing clamps

Lubrication oil filter

Fuel filters

By Pass filters (as per sample)

Fuel pipe duly covered with supper fine steel wire with coupling , nut and bolts.

Fan belt (as per sample)

Engine gasket.

Lubrication Oil

Air filter

Replacement of Hose: Air Cleaner.

Replacement of Gasket: oil filter

M&L for servicing/ cleaning of ball bearing of alternator by cleaning agent ,cleaning the slip rings, adjustment of carbon bushes, greasing the ball bearings, refitting’s and alignments of complete alternator with engine for smooth functioning complete all as specified and directed.

M&L for servicing of DG Set 320 dynamo 12 V assemblly including replacement of worn out armature ,union, carbon bush complete and refixing all the component in existing position with necessayy screw, nuts and bolts for smooth and efficient functioning complete all as specified and directed.

M&L for servicing of DG Set 200 dynamo 12 V assembly including replacement of worn out armature ,union, carbon bush complete and re-fixing all the component in existing position with necessary screw, nuts and bolts for smooth and efficient functioning complete all as specified and directed.

M&L for servicing of DG Set125 dynamo 12 V assembly including replacement of worn out armature ,union, carbon bush complete and re-fixing all the component in existing position with necessary screw, nuts and bolts for smooth and efficient functioning complete all as specified and directed.

M&L for servicing of oil fired incinator including cleaning of burner and nozzle complete all as specified and directed.

De-canning of diesel oil from diesel tank more than 500 ltrs capacity in empty barrel, dismantling of inlet & outlet fuel connection, removing all deposited material from bottom, cleaning the diesel tank with K'oil, scraping of old paint from outer side of tank and applying two coats of synthetic enameled paint on outer surfaces of tank, marking & painting of oil levels on tank, making inlet and outlet connection, re-filling of de-canned diesel in the tank complete all as specified and directed.

De-canning of diesel oil from diesel tank of 20 to 200 ltrs capacity in empty barrel, dismantling of inlet & outlet fuel connection, removing all deposited material from bottom, cleaning the diesel tank with K'oil, scraping of old paint from outer side of tank and applying two coats of synthetic enameled paint on outer surfaces of tank, marking & painting of oil levels on tank, making inlet and outlet connection, re-filling of de-canned diesel in the tank complete all as specified and directed.

De-canning of diesel oil from diesel tank of 200 to 500 ltrs capacity in empty barrel, dismantling of inlet & outlet fuel connection, removing all deposited material from bottom, cleaning the diesel tank with K'oil, scraping of old paint from outer side of tank and applying two coats of synthetic enameled paint on outer surfaces of tank, marking & painting of oil levels on tank, making inlet and outlet connection, re-filling of de-canned diesel in the tank complete all as specified and directed.

M&L for servicing of self-starter of DG Set of capacity 320 KVA by unscrewing nut & bolts, disconnecting battery leads, transporting the same to workshop for armature rewinding, taking out burnt out armature winding, cleaning the same and re-winding the same with equal gauge of insulated copper wires and insulating paper, varnishing and drying etc. including replacing of carbon brushes, & lubricating, oiling and greasing bushes/bearings, carrying back the same & fixing it on its original location, connecting battery leads and testing complete all as specified and directed.

M&L for painting of complete DG Set of capacity 320 KVA by means of scraping old paints preparing the surface for painting with requisite tools then painting the DG Set with two coats of synthetic enamel paint as per existing colour once a coat of red oxide paint over spray gun or by brush as terrible including rewriting of srl No. & MES No.in two inch block letter complete all as specified and directed.

M&L for painting of complete DG Set of capacity 200 KVA by means of scraping old paints preparing the surface for painting with requisite tools then painting the DG Set with two coats of synthetic enamel paint as per existing colour once a coat of red oxide paint over spray gun or by brush as terrible including rewriting of srl No. & MES No.in two inch block letter complete all as specified and directed.

M&L for painting of complete DG Set of capacity 125 KVA by means of scraping old paints preparing the surface for painting with requisite tools then painting the DG Set with two coats of synthetic enamel paint as per existing colour once a coat of red oxide paint over spray gun or by brush as terrible including rewriting of srl No. & MES No.in two inch block letter complete all as specified and directed.

M&L for painting of complete DG Set of capacity 30/20 KVA by means of scraping old paints preparing the surface for painting with requisite tools then painting the DG Set with two coats of sythetic enemal paint as per existing colour once a coat of red oxide paint over spray gun or by brush as terrible including rewriting of srl No. & MES No.in two inch block letter complete all as specified and directed.

S&F in replacement of self-starter assembly suitable for existing capacity of DG set 320 KVA including dismantling complete all as specified and directed. Note :- All accessories nut, bolt washer, wiring etc. deemed to be included in quoted rate.

S&F in replacement of external battery charging unit suitable for 2x12 Volt 95/150/185 AH battery capacity complete all as specified and directed.

S&F in replacement of Auto Voltage Regulator ( AVR) suitable for DG set of capacity 10 KVA to 25 KVA complete all as specified and directed.

S&F in replacement of Auto Voltage Regulator ( AVR) suitable for DG set of capacity 125 KVA to 200 KVA complete all as specified and directed.

S&F in replacement of Auto Voltage Regulator ( AVR) suitable for DG set of capacity 320 KVA complete all as specified and directed.

S&F in replacement of solonoid switch suitable for existing DG set of capacity 320 KVA complete all as specified and directed.

S&F in replacement of solonoid switch suitable for existing DG set of capacity 125 KVA to 200 KVA complete all as specified and directed.

S&F in replacement of solonoid switch suitable for existing DG set of capacity 10 KVA to 25 KVA complete all as specified and directed.

Cleaning of diesel tank of oil fired incinerator, removing all deposited material from bottom of tank complete all as specified and directed.

Servicing of blower motors of 5 HP by lubricating, oiling and greasing of bearings etc complete all as specified and directed.

S&F photoswitch suitable for oiled fired incinerator of existing size complete all as specified and directed.

M&L for earthing complete with galvanised or steel earth plate electrode of size 60cm x60cmx6mm thick buried directly in ground vertically ( to a depth not less than 2.25mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to strip 32x 6 mm size with nuts, bolts , check nuts , washers, earth plate surrounded by packed layers of charcoal dust and common salt 15cm thick all around, top & bottom watering pipe 20mm bore of GI medium grade with funnel and wire mesh all as shown in electrical plate No. 5 of SSR -1991 Part I and connecting to earthing test point, main switch board and testing on completion including PCC chamber concrete 1:3:6 type C-2 and RCC cover 75mm thick with MS TMT bar 8mm dia @ 150mm c/c both ways in cement concrete(1:2:4) type B-1 all as shown in electrical plate in No 5 of SSR(Part-I)2009 complete all as specified and directed.

Supply and fixing/ laying of galvanized iron strip of size 32x6 mm as earth continuity conductor provided in between earth test point terminal and upto the equipment including nuts, bolts and washers complete all as specified and directed.

S&F indicating lamp assembly (LED) Red, green, yellow, blue and making necessary connection including taking down existing unserviceable indicating lamp assembly complete all as specified and directed.

Supply only the following items / material complete all as specified and directed:- Cotton waste white

Caustic soda

Distilled water (1 ltr bottle)

Coolant

Copper battery leads, 1.5 m long

Copper battery terminals

Copper battery leads, 0.80 m long

S&F rubber insulating mat suitable for LT 1100 Volts of size 1 Mtr x 2 Mtr x 10 mm thick complete all as specified and directed.

S&F in replacement Battery 12V 180Ah including testing complete all as specified and directed.

S&F in replacement Battery 12V 150Ah including testing complete all as specified and directed.

S&F in replacement Battery 12V 70 Ah including testing complete all as specified and directed.

S&F MCCB 4 pole 100 Amps with breaking capacity 16 KA 415 volt & elect connection etc completeall as specrfied and directed.

S&F MCCB 4 pole 160 Amps with breaking capacity 25 KA 415 volt & elect connection etc complete all as specified and directed.

S&F MCCB 4 pole 250 Amps with breaking capacity 25 KA 415 volt & elect connection etc complete all as specified and directed.

S&F MCCB 4 pole 400 Amps with breaking capacity 36 KA 415 volt & elect connection etc complete all as specified and directed.

S&F MS chequered Plate cover 10 mm thickness for cable duct including 2 coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F TPN off load change over switch of capacity 400 Amp including dismantling of existing complete all as specified and directed.

S&F TPN on load change over switch of capacity 630 Amp including dismantling of existing complete all as specified and directed.

Dismantling of existing change over switch including disconnection and connection of LT cable complete and supply fixing of offload change over switch of capacity 200 Amp TPN with enclosure box including handle and other accessories complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type soil complete all as specified and directed.

Returning, filling in, any type of soil and spreading in layers n. exc 25cm thick each layer including watering & well ramming complete all as specified and directed.

Removal of surplus soil to a distance n.exc 50 mtr & depositing where directed at a level n. exc. 1.5mtr above the starting point complete all as specified and directed.

Supply and laying old size sub class 'B' brunt clay bricks, laid dry flat, laid lengthwise perpendicular to the axis of cable for protection complete all as specified and directed.

M&L for sand cushioning with layer of sand 8 cm thick before laying of cable and 15 cm after lying of cable in trenches complete all as specified and directed.

Supply and laying XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 120 sqmm 3.5 core complete all as specified and directed.

Supply and laying XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 150 sqmm 3.5 core complete all as specified and directed.

Supply and laying XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 185 sqmm 3.5 core complete all as specified and directed.

Supply and laying XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 240 sqmm 3.5 core complete all as specified and directed.

S & F in replacement GI pipe light grade 100mm bore for cable protection, fixed to pole/ along wall/ floor/ under road/ across the drain or nallaha etc complete all as specified and directed.

S & F in replacement GI pipe light grade 80mm bore for cable protection, fixed to pole/ along wall/ floor/ under road/ across the drain or nallaha etc complete all as specified and directed.

Maintenance and complete servicing of AMF Panel of any size complete all as specified and directed.

S&F of fly wheel assembly of suitable size and compatible for existing diesel generator set of existing make of capacity 320 KVA including testing and complete all as specified and directed.

S&F electric shock treatment chart on flex/ PVC reflecting sheet with of size 50x100 cm complete all as specified and directed.

M/S KS Shahi and Sons