Kerala

Active

Works

Civil Works - Buildings

Annual Plan-NGP218/26-27 CONSTRUCTION OF HELP DESK KIOSKAT SABARIMALA EDATHAVALAM-NGP218/26-27

Local Self Government Department

NARANAMMOOZHI GP | Pathanamthitta, Kerala

Amount: ₹2.5 LCloses: 7 Oct 20266d left

Timeline

Published30 Sept 2026
Closes7 Oct 2026
Bid Opening8 Oct 2026

Tender Value

₹2.5 L

EMD Value

₹6,355

Closing Date

7 Oct 2026, 11:00 am6d left

Tender Inviting Organisation

Name

SREEJITH G NAIR

Address

Office of the Assistant EngineerLIDEW Section Naranammoozhi Grama Panchayat

Work Description

Annual Plan-NGP218/26-27 CONSTRUCTION OF HELP DESK KIOSKAT SABARIMALA EDATHAVALAM-NGP218/26-27

Tender Information

Tender ID

2026_LSGD_874219_5

Reference Number

02/2026-27/AE/LIDEW/NGP/ PHASE-IV/26-27

Tender Type

Open Tender

Product Category

Civil Works - Buildings

Form of Contract

Percentage

Period of Work

120 days

Location

NARANAMMOOZHI GP

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

7 documents required · 7 mandatory

Fee/PreQual/Technical/Finance

RequiredTENDER SCHEDULE (BOQ) (.xls)

RequiredSCANNED COPY OF PRELIMINARY AGREEMENT (.pdf)

RequiredSCANNED COPY OF AFFIDAVIT (.pdf)

RequiredSCANNED COPY OF E - PAYMENT FORM (.pdf)

RequiredSCANNED COPY OF INTEGRITY PACT CERTIFICATE (.pdf)

RequiredSBD DOWNLOADED FROM E TENDER WEBSITE (.pdf)

RequiredSCANNED COPY OF FORM OF TENDER (.pdf)

Fee & Financial Details

Tender Fee Amount

₹560

Tender Fee Exemption Allowed

Yes

EMD Fee Amount

₹6,355

EMD Fee Exemption Allowed

Yes

Important Dates

Last Activity

30 Sept 2026

Published

30 Sept 2026

Bid Opening

8 Oct 2026

Download Starts

30 Sept 2026

Download Ends

7 Oct 2026

Submission Starts

30 Sept 2026

Bill of Quantities

PercentageBoQ_Ver3.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (20 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Maintanance
1.001	2.1.1:Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m and lift up to 1.5 m, disposed soil to be levelled and neatly dressed:All Kinds of soil	0.4	sqm	134.19	₹53.27
1.002	4.1.5:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources)	0.4	cum	8,569.14	₹3,401.95
1.003	50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete	404.75	kg	187.05	₹75,708.3
1.004	10.6.3:Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.80x0.90 mm M.S. laths with 0.90 mm thick to cover	2.08	sqm	3,409.54	₹7,091.84
1.005	OD222357/2026-2027:Supplying and fixing 150mm dia PVC rain water gutter semi circular section including fitting with 32mx5m MS flat supporters at 1m interval etc.complete	4	metre	481.8	₹1,927.2
1.006	13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work	28.93	sqm	164.86	₹4,769.4
1.007	OD222398/2026-2027:Providing and fixing pre-coated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-18 microns.Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desiredby Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete up to any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purloins, rafters and trusses and including cutting to size and shape wherever required.	15.31	sqm	635.15	₹9,724.15
1.008	OD222572/2026-2027:Providing and fixing precoated galvanised steel sheet roofing accessories 0.350 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :Ridges plain (500-600 mm)	4.6	metre	398.92	₹1,835.03
1.009	OD222576/2026-2027:Supplying and installation of moisture resistant/fire resistant V board 10 mm thick, to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately)as per the direction of site Engineer-in-charge.	40.92	sqm	871.1	₹35,645.41

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.04 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.25 MB

Tendernotice_2.pdf

PDF • 0.24 MB

Tendernotice_3.pdf

PDF • 0.28 MB

Work Item Documents

BOQ_1484691.xls

BOQ • 0.34 MB

218PRELI.pdf

Tender Documents • 0.25 MB

218FOT.pdf

Tender Documents • 0.24 MB

SBD218.pdf

Tender Documents • 2.10 MB

218AFFD.pdf

Tender Documents • 0.23 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Maintanance
1.001	2.1.1:Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m and lift up to 1.5 m, disposed soil to be levelled and neatly dressed:All Kinds of soil	0.4	sqm	134.19	₹53.27
1.002	4.1.5:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources)	0.4	cum	8,569.14	₹3,401.95
1.003	50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete	404.75	kg	187.05	₹75,708.3
1.004	10.6.3:Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.80x0.90 mm M.S. laths with 0.90 mm thick to cover	2.08	sqm	3,409.54	₹7,091.84
1.005	OD222357/2026-2027:Supplying and fixing 150mm dia PVC rain water gutter semi circular section including fitting with 32mx5m MS flat supporters at 1m interval etc.complete	4	metre	481.8	₹1,927.2
1.006	13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work	28.93	sqm	164.86	₹4,769.4
1.007	OD222398/2026-2027:Providing and fixing pre-coated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-18 microns.Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desiredby Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete up to any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purloins, rafters and trusses and including cutting to size and shape wherever required.	15.31	sqm	635.15	₹9,724.15
1.008	OD222572/2026-2027:Providing and fixing precoated galvanised steel sheet roofing accessories 0.350 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :Ridges plain (500-600 mm)	4.6	metre	398.92	₹1,835.03
1.009	OD222576/2026-2027:Supplying and installation of moisture resistant/fire resistant V board 10 mm thick, to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately)as per the direction of site Engineer-in-charge.	40.92	sqm	871.1	₹35,645.41

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1Maintanance

1.001

2.1.1:Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m and lift up to 1.5 m, disposed soil to be levelled and neatly dressed:All Kinds of soil

0.4

sqm

134.19

₹53.27

1.002

4.1.5:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources)

0.4

cum

8,569.14

₹3,401.95

1.003

50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

404.75

187.05

₹75,708.3

1.004

10.6.3:Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.80x0.90 mm M.S. laths with 0.90 mm thick to cover

2.08

sqm

3,409.54

₹7,091.84

1.005

OD222357/2026-2027:Supplying and fixing 150mm dia PVC rain water gutter semi circular section including fitting with 32mx5m MS flat supporters at 1m interval etc.complete

metre

481.8

₹1,927.2

1.006

13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work

28.93

sqm

164.86

₹4,769.4

1.007

OD222398/2026-2027:Providing and fixing pre-coated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-18 microns.Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desiredby Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete up to any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purloins, rafters and trusses and including cutting to size and shape wherever required.

15.31

sqm

635.15

₹9,724.15

1.008

OD222572/2026-2027:Providing and fixing precoated galvanised steel sheet roofing accessories 0.350 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :Ridges plain (500-600 mm)

4.6

metre

398.92

₹1,835.03

1.009

OD222576/2026-2027:Supplying and installation of moisture resistant/fire resistant V board 10 mm thick, to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately)as per the direction of site Engineer-in-charge.

40.92

sqm

871.1

₹35,645.41