Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹15.4 LAccepted-Finance | L-1 | Accepted-Finance Accepted due to L-1 | |
| 2 | L-2₹17.7 L+₹2.2 L (14.6%)Rejected-Finance JOGINDER NAGAR | JALANDHAR | PUNJAB | 144020 | L-2 | Rejected-Finance Rejected due to L-2 |
Tender Value
₹15.5 L
EMD Value
₹31,000
Closing Date
16 Apr 2022, 5:00 pmClosed
Executive Engineer
O/o Executive Engineer, B and R Division, HPPWD, Joginder Nagar
Providing and laying primer coat, Tack coat and built-up spray grout, bituminous concrete in Km. 2/0 to 3/0
2022_PWD_59359_1
PW-JND-B and R-EA-I-NIT- 1052-76 dt. 05/04-2022
Open Tender
Civil Works - Roads
Item Rate
60 days
Chauntra
As per SBD
10 documents required · 10 mandatory
₹500
₹31,000
2 May 2022
8 Apr 2022
18 Apr 2022
8 Apr 2022
16 Apr 2022
8 Apr 2022
Amount
Providing and applying primer coat medium porosity with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road srurface and spraying primer at the rate of 0.85 (zero point eight five) kilogram per square metre using mechnical means as per technical specification cluase 502 complete within all leads, lifts, carriage of material and other incidentials charges.
Providing and applying tack coat with bitumen emulsion confirming to IS:8887 (RS-1) using emulsion pressure distributor including preparing the surface and cleaning with mechnical broom on the prepared dry and hungry bituminous surface @ 0.275 kg/sqm (at the rate of zero point two seven five kilogramme per square metre) as per technical specification, complete in all respect including haulage of material in all leads and lifts by all modes of transportation and as per the entire satisfaction and direction of Engineer-in-Charge.
Providing and Laying bituminous concrete 30mm ( thirty millimetre) compacted thickness with bitumen of grade VG-10 (ten) @ 5.0% (at the rate of five point zero per cent) (percentage by weight of total mix) and lime/cement filler @ 2% (three percentage) (percentage by weight of aggregatre) prepared in Batch Type Hot Mix Plant of 100-120 (Hundred - one hundred twenty) TPH capacity by using crushed aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equiped with electronic sensor to the required garde, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density as per specification, complete in all respect including haulage of material in all leads and lifts by all modes of transportation and as per the entire satisfaction and direction of Engineer-in-Charge.
ANURAG SHARMA
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .