Fully Comprehensive Annual Maintenance of Sreebhoothapuram No. 1 LIS, Sreebhoothapuram No. 2 and Kandanthara LIS Under Electrical Lift Irrigation Section Kalady

Amount

Maintenance of L I Scheme 2020-21 Fully Comprehensive Annual Maintenance of Sreebhoothapuram No. 1 LIS (160 HP x 3 Nos and 5 HP x 1 No )

PART 1 - Overhauling

od16751/2021_2022/IA : Lowering down and erecting the 160 HP motor, starter and other electrical accessories and erecting the motor on the base plate coupling with pump, erecting the starter regulator TP switch etc in position giving connections checking correct alignment and trial run on full load

od16731/2021_2022/IA : Lowering down and erecting the 5 HP motor, starter and other electrical accessories,( Accessories when necessary ) and erecting the motor on the base plate coupling with pump, erecting the starter regulator TP switch etc in position giving connections checking correct alignment and trial run on full load

od16744/2021_2022/IA : Dismantling the 2.5 - 5HP motor into stator and rotor, cleaning the windings, attending minor repairs, retaping the coils if necessary, varnishing the coils with best quality insulation varnish, cleaning and greasing the bearings with Lithium base grease, heating and baking the windings, reassembling, test running including scrapping, cleaning and painting with 2 coats of Grey enamel paint.

od16963/2021_2022/IA : Dismantling above 110HP motor into stator and rotor, cleaning the windings, attending minor repairs, retaping the coils if necessary, varnishing the coils with best quality insulation varnish, cleaning and greasing the bearings with Lithium base grease, heating and baking the windings, reassembling, test running including scrapping, cleaning and painting with 2 coats of Grey enamel paint.

od16964/2021_2022/IA : Scrapping, cleaning and painting the Suction / Delivery side MS Pipe with Anticorrosive bituminous black paint over a coat of zinc rich primer

PART 2 _ Periodic maintenance

od16967/2021_2022/IA : Fully Comprehensive Annual Maintenance of above 110 HP squirrel cage induction motor with split case / End suction pump set, starter, controlling electrical accessories, pipes, NRV, Wheel valves etc complete for a period of 12 months including attending all repairs , reconditioning the damaged parts , replacing spares with original make as per sample , dismantling and refitting, cutting, welding suction and delivery pipes , reconditioning NRV and Wheel valve,if any removing foreign bodies , renewal of gland packing , gasket packing ,rubber packing , greasing the bearing etc as and when required including overhauling of pump ( excluding motor rewinding , supply and renewal of pipes ) and maintain the motor pump sets , pipes , valves, fully automatic star delta starter / soft starter panel accessories etc complete in good working condition all time during the period of contract and the faults should be rectified with in the time allowed .

od16968/2021_2022/IA : Fully Comprehensive Annual Maintenance of 61-110HP Slip ring induction motor with split case / End suction pump set , starter, controlling electrical accessories , panel board, pipes , NRV , Wheel valves etc complete for a period of 12 months including attending all repairs ,overhauling & reconditioning of starter and slip ring unit, replacing of damaged coupling bush, carbon brush and coupling bolts, refilling of oil, reconditioning the damaged parts , replacing spares with original make as per sample , dismantling and refitting , cutting , welding suction and delivery pipes , reconditioning NRV and Wheel valve , if any removing foreign bodies , renewal of gland packing , gasket packing , rubber packing , greasing the bearing etc as and when required including overhauling of pump and starter ( excluding motor rewinding , supply and renewal of pipes ) and maintain the motor pump sets , pipes , starter , valves electrical accessories etc complete in good working condition all time during the period of contract and the faults should be rectified with in the time allowed

od16729/2021_2022/IA : Fully Comprehensive Annual Maintenance of 5 HP Squirrel cage induction induction motor with Vacuum pump set , D.O.L starter ,controlling electrical accessories , etc complete for a period of 12 months including attending all repairs , reconditioning the damaged parts , replacing spares with original make as per sample , dismantling and refitting , removing foreign bodies , renewal of gland packing , gasket packing , rubber packing , greasing the bearing etc as and when required including overhauling of pump Including motor rewinding and maintain the motor pump sets , pipes , starter and valves electrical accessories etc complete in good working condition all time during the period of contract and the faults should be rectified with in the time allowed

PART 3 _ Consumables and supply

od45902/2021_2022/IA : Supply and filling of transformer oil of good quality to the Transformer /starter/ regulator etc as required

od45903/2021_2022/IA : Dismantling the damaged power contactor and Supply, fixing and testing of following capacity 3 pole power contactor, AC 3 rating at 415 V, with AC Coil, Auxiliary contacts, 2 NO/2NC, L&T MNX 265 or equivalent suitable for 160 HP motor's fully automatic star delta starter

od45904/2021_2022/IA : Supply and Installing 20 W LED Tube light.

od45905/2021_2022/IA : Supply and renewal of the LED Indication lamps in panel board after dismantling the damaged one

od45906/2021_2022/IA : Replacing the damaged bearing, supply and fixing new industrial type ball bearing 6319 2Z C3, SKF / FAG or equivalent, suitable for 175 HP motor / pump set as per the direction of Departmental staff at site.

90.14.24.29 : Supply & fixing the following Power Capacitors 3 phase delta connected in positon and giving connection.40 KVAr, 3 phase, 440 V, delta connected, standard duty Metalised Poly Propylene Capacitor, Box Type, suitable for direct connection to motors.

od16742/2021_2022/IA : Supply and clamping the 25 x 3mm strips on surface of wall/ parapet/ existing cable tray using clamps fabricated from 20 x 3 mm GI flat duly painted or heavy duty GI spacer saddles, spacing of clamps not exceeding 1m, making good the damages, colour washing etc. as required (for horizontal run).

od17250/2021_2022/IA : Supply of adjustable spanner 300 mm Taparia or equivalent

od17251/2021_2022/IA : Supply of Nose plier Taparia or equivalent

od17252/2021_2022/IA : Supply of insulation tester Meco DIT918 or equivalent

od17253/2021_2022/IA : Supply of D Shackle ¾ inches - 5T SWL

od17254/2021_2022/IA : Supply of electric hand hammer drill BOSCH Bosch Freedom Kit GSB 550 or equivalent

od17255/2021_2022/IA : Supply of electric hand angle grinder BOSCH GWS 600 or equivalent

od17256/2021_2022/IA : Supply of hack saw saw frame with 10 pieces of high speed steel blades, Taparia or equivalent

od17257/2021_2022/IA : Supply of electric hand blower

od17258/2021_2022/IA : Supply of electric hand hot air gun

od17259/2021_2022/IA : Supply of Mechanical crimping tool – 50 mm Taparia or equivalent

od17260/2021_2022/IA : Supply of Crimping tool hydraulic – 300 mm Taparia or equivalent

od17294/2021_2022/IA : Supply of Box spanner set – 8 to 32 mm Taparia or equivalent

od17262/2021_2022/IA : Supply of Nylone Lifting belt , SWL 5 Ton

od17263/2021_2022/IA : Supply of Hexagon Crow bar 59 x 3/16 inches

od17264/2021_2022/IA : Supply of 16 mm nylone rope, 100m roll

od17265/2021_2022/IA : Chain block 3 Ton with additional chain of 15 meters

od17266/2021_2022/IA : Supply of Cutting chisel 25 x 200 mm Taparia or equivalent

od17267/2021_2022/IA : Supply of Screw driver, 2 in 1 tipped, 300 x 6 mm Taparia or equivalent

od17268/2021_2022/IA : Supply of Screw driver, flat tipped, 300 x 4 mm Taparia or equivalent

od17269/2021_2022/IA : Supply of Screw driver, flat tipped, 300 x 8 mm Taparia or equivalent

od17270/2021_2022/IA : Supply of Gear bearing puller Taparia or equivalent

od17271/2021_2022/IA : Supply of Sludge Hammer – 2 lb Taparia or equivalent

od17272/2021_2022/IA : Supply of Sludge Hammer – 3 lb Taparia or equivalent

od17273/2021_2022/IA : Supply of Pipe wrench 600 mm Taparia or equivalent

od17274/2021_2022/IA : Supply of double end Spanner set – 8/9 to 30/32 inches Taparia or equivalent

od17275/2021_2022/IA : Supply of Ring Spanner set – 8/9 to 30/32 inches Taparia or equivalent

od17276/2021_2022/IA : Supply of combination wire stripper - outer Taparia or equivalent

od17277/2021_2022/IA : Supply of circlip plier - outer Taparia or equivalent

od17279/2021_2022/IA : Supply of circlip plier - inner Taparia or equivalent

od17280/2021_2022/IA : Supply of combination plier 210 mm Taparia or equivalent

od17281/2021_2022/IA : Supply of line tester Taparia 814 or equivalent

od17282/2021_2022/IA : Supply of Analogue multimeter Metravi 5050E Analogue or equivalent Rs.3500

od17305/2021_2022/IA : Supply of Digital Clamp Meter Mastech MS2101 Digital AC/DC Clamp Meter or equivalent

PART 4 - Lifting

od16726/2021_2022/IA : Lifting the 5 HP motor after disconnecting the wire connection, decoupling the pump, detaching from the base plate, starters, TP switches etc. using chain block, rope, chain etc. and placing them conveniently on the platform

od16975/2021_2022/IA : Lifting the above 110 HP motor after disconnecting the wire connection, decoupling the pump, detaching from the base plate, starters, TP switches etc. using chain block, rope, chain etc. and placing them conveniently on the platform.

Maintenance of L I Scheme 2020-21 Fully Comprehensive Annual Maintenance of Sreebhoothapuram 2 LIS (160 HPSC X 1 No, 160 HPSR X 1 No and 5 HP x 1 No)

PART 1 - Ovehauling

od16741/2021_2022/IA : Scrapping, cleaning and painting the Suction / Delivery side MS Pipe with Anticorrosive bituminous black paint over a coat of zinc rich primer

od16982/2021_2022/IA : Dismantling the 2.5 - 5HP motor into stator and rotor, cleaning the windings, attending minor repairs, retaping the coils if necessary, varnishing the coils with best quality insulation varnish, cleaning and greasing the bearings with Lithium base grease, heating and baking the windings, reassembling, test running including scrapping, cleaning and painting with 2 coats of Grey enamel paint.

od16963/2021_2022/IA : Dismantling above 110HP motor into stator and rotor, cleaning the windings, attending minor repairs, retaping the coils if necessary, varnishing the coils with best quality insulation varnish, cleaning and greasing the bearings with Lithium base grease, heating and baking the windings, reassembling, test running including scrapping, cleaning and painting with 2 coats of Grey enamel paint.

od16983/2021_2022/IA : Refitting above 110 HP motor on the base plate coupling with pump, refitting the starter, regulator, TP switch, other electrical accessories etc in position giving connections, checking correct alignment, testing and trial run on full load

od16984/2021_2022/IA : Refitting the vacuum motor up to 10 HP on the base plate, coupling with pump, giving connections to the motor, starter and other electrical accessories etc in position, checking correct alignment, testing and trial run on full load

PART 2 - Periodic Maintenance

od16985/2021_2022/IA : Fully Comprehensive Annual Maintenance of 5 HP Squirrel cage induction induction motor with Vacuum pump set , D.O.L starter ,controlling electrical accessories , etc complete for a period of 12 months including attending all repairs , reconditioning the damaged parts , replacing spares with original make as per sample , dismantling and refitting , removing foreign bodies , renewal of gland packing , gasket packing , rubber packing , greasing the bearing etc as and when required including overhauling of pump Including motor rewinding and maintain the motor pump sets , pipes , starter and valves electrical accessories etc complete in good working condition all time during the period of contract and the faults should be rectified with in the time allowed

od16967/2021_2022/IA : Fully Comprehensive Annual Maintenance of above 110 HP squirrel cage induction motor with split case / End suction pump set, starter, controlling electrical accessories, pipes, NRV, Wheel valves etc complete for a period of 12 months including attending all repairs , reconditioning the damaged parts , replacing spares with original make as per sample , dismantling and refitting, cutting, welding suction and delivery pipes , reconditioning NRV and Wheel valve,if any removing foreign bodies , renewal of gland packing , gasket packing ,rubber packing , greasing the bearing etc as and when required including overhauling of pump ( excluding motor rewinding , supply and renewal of pipes ) and maintain the motor pump sets , pipes , valves, fully automatic star delta starter / soft starter panel accessories etc complete in good working condition all time during the period of contract and the faults should be rectified with in the time allowed .

od16986/2021_2022/IA : Fully Comprehensive Annual Maintenance of above110HP Slip ring induction motor with split case / End suction pump set , starter, controlling electrical accessories , panel board, pipes , NRV , Wheel valves etc complete for a period of 12 months including attending all repairs ,overhauling & reconditioning of starter and slip ring unit, replacing of damaged coupling bush, carbon brush and coupling bolts, refilling of oil, reconditioning the damaged parts , replacing spares with original make as per sample , dismantling and refitting , cutting , welding suction and delivery pipes , reconditioning NRV and Wheel valve , if any removing foreign bodies , renewal of gland packing , gasket packing , rubber packing , greasing the bearing etc as and when required including overhauling of pump and starter ( excluding motor rewinding , supply and renewal of pipes ) and maintain the motor pump sets , pipes , starter , valves electrical accessories etc complete in good working condition all time during the period of contract and the faults should be rectified with in the time allowed

PART 3 - Consumables and Supply

od45911/2021_2022/IA : Supply and filling of transformer oil of good quality to the Transformer /starter/ regulator etc as required

od45912/2021_2022/IA : Dismantling the damaged power contactor and Supply, fixing and testing of following capacity 3 pole power contactor, AC 3 rating at 415 V, with AC Coil, Auxiliary contacts, 2 NO/2NC, L&T MNX 265 or equivalent suitable for 160 HP motor's fully automatic star delta starter

od45913/2021_2022/IA : Supply and Installing 20 W LED Tube light.

od45914/2021_2022/IA : Supply and renewal of the LED Indication lamps in panel board after dismantling the damaged one

od45917/2021_2022/IA : Replacing the damaged bearing, supply and fixing new industrial type ball bearing 6319 2Z C3, SKF / FAG or equivalent, suitable for 175 HP motor / pump set as per the direction of Departmental staff at site.

90.14.24.29 : Supply & fixing the following Power Capacitors 3 phase delta connected in positon and giving connection.40 KVAr, 3 phase, 440 V, delta connected, standard duty Metalised Poly Propylene Capacitor, Box Type, suitable for direct connection to motors.

od16742/2021_2022/IA : Supply and clamping the 25 x 3mm strips on surface of wall/ parapet/ existing cable tray using clamps fabricated from 20 x 3 mm GI flat duly painted or heavy duty GI spacer saddles, spacing of clamps not exceeding 1m, making good the damages, colour washing etc. as required (for horizontal run).

od45908/2021_2022/IA : Strengthening of existing base plate of of 160 HP (NO.1) motor pump set -Dismantle the pump set, suction & delivery pipes, dismantle the base plate & undertake workshop repairs including required size of iron materials, machining, painting and reinstalling to the concrete floor including the to and fro transportation from and to the pump house,

od17439/2021_2022/IA : Supply, installation on suitable metal frame, testing and commissioning of 440 Volts, 3 Phase oil immersed starter and regulator including 200 litres of transformer oil by replacing starter of the existing 160 HP slip ring induction motor, and securing the old starter in a safe location.

Maintenance of L I Scheme 2020-21 Fully Comprehensive Annual Maintenance of Kandanthara LIS (75 HPSR X 2 No and 5 HP x 1 No)

PART 1 - Overhauling

od16990/2021_2022/IA : Lowering down and erecting the 5 HP motor, starter and other electrical accessories,( Accessories when necessary ) and erecting the motor on the base plate coupling with pump, erecting the starter regulator TP switch etc in position giving connections checking correct alignment and trial run on full load

od16982/2021_2022/IA : Dismantling the 2.5 - 5HP motor into stator and rotor, cleaning the windings, attending minor repairs, retaping the coils if necessary, varnishing the coils with best quality insulation varnish, cleaning and greasing the bearings with Lithium base grease, heating and baking the windings, reassembling, test running including scrapping, cleaning and painting with 2 coats of Grey enamel paint.

od16991/2021_2022/IA : Dismantling the 61HP -110HP motor into stator and rotor, cleaning the windings, attending minor repairs, retaping the coils if necessary, varnishing the coils with best quality insulation varnish, cleaning and greasing the bearings with Lithium base grease, heating and baking the windings, reassembling, test running including scrapping, cleaning and painting with 2 coats of Grey enamel paint.

od16964/2021_2022/IA : Scrapping, cleaning and painting the Suction / Delivery side MS Pipe with Anticorrosive bituminous black paint over a coat of zinc rich primer

od16992/2021_2022/IA : Lowering down and erecting the 61- 110 HP motor, starter and other electrical accessories and erecting the motor on the base plate coupling with pump, erecting the starter regulator TP switch etc in position giving connections checking correct alignment and trial run on full load

PART 2 - Periodic maintenance

od16985/2021_2022/IA : Fully Comprehensive Annual Maintenance of 5 HP Squirrel cage induction induction motor with Vacuum pump set , D.O.L starter ,controlling electrical accessories , etc complete for a period of 12 months including attending all repairs , reconditioning the damaged parts , replacing spares with original make as per sample , dismantling and refitting , removing foreign bodies , renewal of gland packing , gasket packing , rubber packing , greasing the bearing etc as and when required including overhauling of pump Including motor rewinding and maintain the motor pump sets , pipes , starter and valves electrical accessories etc complete in good working condition all time during the period of contract and the faults should be rectified with in the time allowed

od16968/2021_2022/IA : Fully Comprehensive Annual Maintenance of 61-110HP Slip ring induction motor with split case / End suction pump set , starter, controlling electrical accessories , panel board, pipes , NRV , Wheel valves etc complete for a period of 12 months including attending all repairs ,overhauling & reconditioning of starter and slip ring unit, replacing of damaged coupling bush, carbon brush and coupling bolts, refilling of oil, reconditioning the damaged parts , replacing spares with original make as per sample , dismantling and refitting , cutting , welding suction and delivery pipes , reconditioning NRV and Wheel valve , if any removing foreign bodies , renewal of gland packing , gasket packing , rubber packing , greasing the bearing etc as and when required including overhauling of pump and starter ( excluding motor rewinding , supply and renewal of pipes ) and maintain the motor pump sets , pipes , starter , valves electrical accessories etc complete in good working condition all time during the period of contract and the faults should be rectified with in the time allowed

PART 3 - Consumables and supply

od45941/2021_2022/IA : Supply and filling of transformer oil of good quality to the Transformer /starter/ regulator etc as required

od45942/2021_2022/IA : Supply and Installing 20 W LED Tube light.

od45943/2021_2022/IA : Supply and renewal of the LED Indication lamps in panel board after dismantling the damaged one

od45944/2021_2022/IA : Replacing the damaged bearing, supply and fixing new industrial type ball bearing 6317 2Z C3, SKF / FAG or equivalent, suitable for 75 HP motor / pump set as per the direction of Departmental staff at site.

od16742/2021_2022/IA : Supply and clamping the 25 x 3mm strips on surface of wall/ parapet/ existing cable tray using clamps fabricated from 20 x 3 mm GI flat duly painted or heavy duty GI spacer saddles, spacing of clamps not exceeding 1m, making good the damages, colour washing etc. as required (for horizontal run).

PART 4 - Lifting

od45930/2021_2022/IA : Lifting the 80 HP motor after disconnecting the wire connection, decoupling the pump, detaching from the base plate, starters, TP switches etc. using chainblock, rope, chain etc. and placing them conveniently on the platform.

od16726/2021_2022/IA : Lifting the 5 HP motor after disconnecting the wire connection, decoupling the pump, detaching from the base plate, starters, TP switches etc. using chain block, rope, chain etc. and placing them conveniently on the platform

SHIJU M.T

Bidder Name

SHIJU M.T

GK INDUSTRIES