REPAIRS TO MP TILES ROOFING SHEETS EVEES BOARDS VALLY GUTTER WATER PROOFING TREATMENT WITH APP REPAIRS TO ROLLING SHUTTERS HANGER HONGES DOORS ETC FOR E J AREA AT NAVAL BASE KOCHI UNDER GE NW KOCHI

Amount

Dismantling single layer Mangalore pattern or similar tiles in roofing compleate all as specified and directed by Engr -In-Charge.

Dismantling plain or corrugated steel sheeting any gauge, thickness complete in roofing compleate all as specified and directed by Engr -In-Charge.

Dismantling asbestos cement corrugated sheets in roof coverings compleate all as specified and directed by Engr -In-Charge.

Dismantling battens for tiles, shingles, etc of any size exceeding 15cm spacing including tilting fillets compleate all as specified and directed by Engr -In-Charge.

Dismantling timber boarding any description fixed in any position with nails compleate all as specified and directed by Engr -In-Charge.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/blankets, any thickness including cover fillets compleate all as specified and directed by Engr -In-Charge.

Dismantling timber scantiling 40 Sqcm and over in section unframed work in any position compleate all as specified and directed by Engr -In-Charge.

All as per Item No. 7 above, but in fillets, rails, posts, rafters, purlins, etc under 40 Sqcm in section unframed work compleate all as specified and directed by Engr -In-Charge.

M&L for IInd class hard wood boarding clean sawn with butt joints, 20mm thick as in soffits of gutter, eves board fixed with nails, etc compleate all as specified and directed by Engr -In-Charge.

All as per Item No. 9 above but fixing only compleate all as specified and directed by Engr -In-Charge.

S&F 0.63mm thick glavanised corrugated mild steel sheeting with two corrugation side lap fixed with 'L' type or 'J' type hook bolts and washers in roofs with grade of zinc coating 275 compleate all as specified and directed by Engr -In-Charge.

All as per Item No. 11 above but except sheeting any thickness compleate all as specified and directed by Engr -In-Charge.

S&F Plain Aluminium sheeting 0.71mm thick, Alloy 31000H4 in ridge, hips, valley gutter, drip and straight flashings compleate all as specified and directed by Engr -In-Charge.

S&F for pre-painted galvalume zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws compleate all as specified and directed by Engr -In-Charge.

S&F for pre-painted galvalume zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws compleate all as specified and directed by Engr -In-Charge.

M&L for 6mm thick asbestos cement corrugated or semi corrugated sheets fixed with, 'J' or 'L' type hooks as in roofs compleate all as specified and directed by Engr -In-Charge.

S&F AC two piece adjustable plain wing ridge 6mm thick fixed with 'J' or 'L' type hooks compleate all as specified and directed by Engr -In-Charge.

M&L for Mangalore pattern roof tiles interlocking at side joints laid dry compleate all as specified and directed by Engr -In-Charge.

All as per Item No. 18 above, but except tiles compleate all as specified and directed by Engr -In-Charge.

M&L for ridge or hip tiles to suit Mangalore pattern of roofing tiles bedded and jointed in CM 1:6 compleate all as specified and directed by Engr -In-Charge.

All as per Item No. 20 here-in-before but except tiles compleate all as specified and directed by Engr -In-Charge.

M&L for 2nd class hard wood in scantling clean sawn fixed as in purlins, rafters, etc in roof compleate all as specified and directed by Engr -In-Charge.

M&L for 2nd class hard wood clean sawn battern for tile at 30cm centres of sectional area exc 15Sqcm and n.exc 25Sqcm compleate all as specified and directed by Engr -In-Charge.

All as per Item No. 23 above, but fixing only compleate all as specified and directed by Engr -In-Charge.

M&L for 4mm thick non asbestos fibre cement building boards fixed to timber or aluminium frame work with screws as in repairs compleate all as specified and directed by Engr -In-Charge.

M&L preparation of new surface and applying three coats of white wash on ceiling compleate all as specified and directed by Engr -In-Charge.

M&L for lInd class hard wood plain fillets square, rectangular or triangular in section clean sawn secured with nails etc of sectional area exc 3 Sqcm and n.exc 6 Sqcm compleate all as specified and directed by Engr -In-Charge.

Taking down rainwater pipe, eaves gutter and AC vent pipe of any size including AC gutters, walls etc incl all fittings compleate all as specified and directed by Engr -In-Charge.

M&L for PVC eves gutter heavy duty with half round 180 mm dia compleate all as specified and directed by Engr -In-Charge.

M&L for PVC (SWR) junctions (Single 'T') equal or unequal to fit 180mm bore eves gutters, top portion half round and bottom portion to fit 110mm bore PVC pipes, etc compleate all as specified and directed by Engr -In-Charge.

S&F PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to walls 110mm bore compleate all as specified and directed by Engr -In-Charge.

S&F PVC (SWR) bends any radius to fit 110mm bore pipe with access door compleate all as specified and directed by Engr -In-Charge.

Dismantling structural steel work such as brackets for rain water pipe, gutter, etc compleate all as specified and directed by Engr -In-Charge.

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe-290 Gde-E-165 compleate all as specified and directed by Engr -In-Charge.

S & F MS Plates (plain or chequered) for structural purpose, channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe-410-W(Gde- E-250) quality- B compleate all as specified and directed by Engr -In-Charge.

S&F steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240 compleate all as specified and directed by Engr -In-Charge.

S & F of roof trusses (framed or tubular sections) trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel, tubular pipes or flat sections) including distance pieces, cleats etc conforming to Fe-410- W(Gde-E-250) quality- B compleate all as specified and directed by Engr -In-Charge.

S&F Mild steel work in bands, straps, support for rainwater pipe, etc complete conforming to Fe-410-0 or Fe-310-0 compleate all as specified and directed by Engr -In-Charge.

M & L for Preparation of steel surface of any description or 10cm width or girht and applying 2 coat of synthetic enamel paint over a coat of red oxide primer for new or old untreated surfaces compleate all as specified and directed by Engr -In-Charge.

Preparation of old steel surface of any description or 10cm width or girht and applying 2 coat of synthetic enamel paint compleate all as specified and directed by Engr -In-Charge.

M&L for repairing surfaces of wood and wood based surfaces, new or old of any description and girth and treated with one coat of creosote compleate all as specified and directed by Engr -In-Charge.

M & L applying two coat of cresote oil on new wooden surfaces of any description incl preparation of surface compleate all as specified and directed by Engr -In-Charge.

M&L for preparing and treating tiles battens any size and spacing with one coat of creosote complete all as specified. (Measured overall in one side only spacers not deducted) compleate all as specified and directed by Engr -In-Charge.

M&L Preperation of new wood/wood based surface exc 10cm width/girth & apply painting two coats of synthetic enamel paint over a coat of pink primer compleate all as specified and directed by Engr -In-Charge.

Demolition of cement concrete (Un-Reinforced/reinforced) from roof, chajjas and similar work at any thickness including old treatment and rubbish of the premises compleate all as specified and directed by Engr -In-Charge.

M & L for rendeing 15 mm thick on concrete/brick surfaces in CM 1: 4 finished even and smooth with out using extra cement including WPC as per manufacturers instrs compleate all as specified and directed by Engr -In-Charge.

Supply only Water Proofing Compound compleate all as specified and directed by Engr -In-Charge.

M&L for provn of water treatment by applying oil bound bituminous primer 0.25 Kg/Sqm, providing and laying 4mm thick APP modified water proofing membrane weighing not less than 4 Kg/Sqm, reinforced non woven polyester matt not less than 160 g/Sqm, having softening point not less than 1400 C longitudinal tensile strength not less than 800 N/Sqcm tearing strength of 180 N/ Torque application including minimum 10cm side overlap and 15cm end overlap and applying a coat of blown grade hot bitumen 90/15 over the membrane @ 1.2 Kg/ Sqm, finishing the surface with solar reflective bituminous aluminium paint @ 100 g/Sqm, complete all as specified all as specified and as directed by Engineer in Charge and as per manufacturer's instructions.

Demolition of brick work built in cement mortar, including all quoine, arches, pillar etc all as specified and directed by the Engr-in-Charge.

Taking down cement plaster of any description on brick or stone walls, ceiling including racking out joints, hacking for key, scrubbing down with water etc compleate all as specified and directed by Engr -In-Charge.

M&L pre cast cement concrete block masonry 1;3;6 with solid blocks exec 10 cm in width and setting in CM1;6 compleate all as specified and directed by Engr -In-Charge. (Make-Alwaye/perumbavoor)

M&L for 10mm thick plaster in CM 1;6 finished even and smooth without using extra cement compleate all as specified and directed by Engr -In-Charge.

M&L for Preparation of new plastered surface of wall and applying two coat of antifungal paint over a coat of primer at any storey, including provn and removal after use, of necessary scaffolding, complete all as specified and as directed by Engineer In Charge.

S/F Aluminum snap grid false ceiling with grid 605x605mm size including hangers 6 mm dia GI (upto 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flats 40 x 3 mm size 60 mm long & expansion hold fastners 12.5 mm dia 40 mm long compleate all as specified and directed by Engr -In-Charge. Make: JINDAL/INDAL/HINDALCO)

S/F 4mm thick Non asbestos fibre cement building boards fixed or laid/inserted to timber/GI/Aluminium framework with stainless steel screws compleate all as specified and directed by Engr -In-Charge.

M&L for providing pressure grouting on leaking points using 40 psi grout pump , sealing the cracks and honey-combs using cementitious sealent , applying a coat of polyplus AC , two component acrylic based , water proof coat @ 500 gms/sqm , after 4 hrs applying second coat with polyplus AC @ 500 gms/sqm compleate all as specified and directed by Engr -In-Charge.

M&L waterproofing treatment with Brush bond of make FOSROC compleate all as specified and directed by Engr -In-Charge.

M&L Preperation of newly plastered wall surfaces and application of and application of two coats of oilbound distemper over a coat of primer compleate all as specified and directed by Engr -In-Charge.

S&F steel rolling shutters 1.25mm thickness of laths, with all guide mechanism, as specified including top cover anchoring rod, hasp & staple & one shop coat of primer, erected in position as indicated compleate all as specified and directed by Engr -In-Charge.

Anaswara Constructions

M/s ANTONY THOMAS AND CO

POOJA ENGINEERING WORKS

Vidya constructions